Professional Documents
Culture Documents
1. GENERAL INFORMATION
Term Definition
Term Definition
Term Definition
Term Definition
*.RVT Basic file format for storing data about an Autodesk Revit project
*.NWF The main working format of Autodesk Navisworks, consisting of links to uploaded
model files, as well as viewpoints, animations, construction simulations, clash
checks
*.NWD Autodesk Navisworks file format for publishing, designed to batch save all model
data into a single file and transfer to third parties
*.IFC An open specification industry-leading data class format for data sharing in con-
struction and building management
Page 4 of 155
Geological report
AutoCAD Civil 3D DWG
Creation and editing of toposur-
External networks
face, documentation
AR Architectural solutions AR
AI Architectural interiors (Design project) AI
GP General plan GP
GP*
SP Scheme of the planning organization of the land plot SP
KR Constructive solutions KR
KG Reinforced concrete structures KG KR*
KM Metal structures KM
KM Structures metal curtain wall systems (NFS) KM
Heating OT
OV Ventilation VENT OV*
Air conditioning KV
ITP Individual heat point ITP
VK Internal water supply systems and canalization VK
PT Fire extinction PT
EOM Electrical equipment and lighting EOM
SS Communication systems, low-current communication networks SS
AVT Automation AVT
NS External water supply and sewerage network layout. NS
* - a common cipher that unites several sections, is used if these sections of the project are performed in one
model
** - used in the names of model files (see section 2.7)
The summary BIM model prepared by the general designer should include models of
all sections of the project, including those developed by individual organizations (design pro-
ject, external networks, landscaping).
Page 7 of 155
Planning and design stage. • Detailing the BIM model of the 3D concept.
Primary BIM model (Stage 200 • The Stage 1 model is provided one month after the start of
1) planning and design stage.
• Detailing and parameterization of model elements, elimina-
tion of collisions.
• Formation of documentation of planning and design stage
based on the BIM model.
Kits to be submitted to the appraisal must be un-
Planning and design stage.
loaded from the BIM model and made available for
BIM-model before entering
inspection 2 weeks before entering the expert review.
the MSE (Stage 2)
• Formation in Revit of the register for the DDU , for more
details in the section8.1 ...
• Formation on the basis of the BIM-model of the document
"Table of the main parameters of the object for planning
and design stage, CD stage"
• Correction of the BIM-model according to the comments of
300 the Expert review.
The sets of drawings in the BIM model must be cor-
rected according to the MSE comments and fully
comply with the drawings agreed by the MSE.
• Formation on the basis of the BIM-model of the album of
Planning and design stage. the plan of the designed facility (hereinafter referred to as
BIM-model after passing the PSO) of real estate . The PSO album mustbe unloaded
the MSE (Stage 3) within 1 week after receiving the positive con-clusion of
the MSE.
• Updating the register for preschool education ,more details
in the Section 8.1.
• Clarification of the volumes in the document "Table of the
main parameters of the object for planning and design
stage, CD stage"
Page 8 of 155
For a detailed diagram of the stages, see the BIM360 link (see the Section 10.2).
Not allowed:
• The presence of incorrect gaps / intersections, collisions, abutment / support of building
elements, unjustified by the design solution.
• Inaccurate construction of elements with subsequent rounding of dimensional values to
whole numbers.
• Duplication of elements of the BIM model.
• Using Model lines to display 3D model elements.
* filled in if necessary
** project stage is indicated only for summary models
Code - the abbreviated name of the project, must be agreed with the Customer and
recorded in the "BIM Execution Plan (BEP)”.
The section code should be taken according to Table 2.3.1, for summary models use
the FM (Federated model) code, for the coordination file - COORD.
Creator - the short name of the design organization developing this BIM project.
Page 12 of 155
2.8.1. General
It is necessary to provide in BIM-models:
• a common coordinate system with the name and reference to the actual planting of
the building on a geo-base in the Moscow coordinate system, set the coordinate
system based on the coordination file (see Section 2.8.2);
• absolute and relative elevations;
• a unified level system in the models of all sections; all levels must correspond to
the level of the finished floor in the architectural model;
• snapping the base point of the model to the point of intersection of the 1 / A axes or
the lower left axis (Figure 2.8.1);
The presence of a single coordinate system and names of common sites in all models
is mandatory.
Page 14 of 155
The description of the coordinate system for a specific project must be recorded in the
"BIM Execution Plan (BEP)”.
Specification Description
The model element has approximate dimensions, due to the lack of the pos-
Conditional dimensions
sibility of their accurate determination at the current stage of the project
The size corresponds to the design dimensions of the component for this de-
Exact dimensions
sign stage.
The model element is located approximately, but at the same time the floor,
Conditional location
room and / or model element on which it is located is precisely defined
The location of the element in the model exactly matches the design posi-
Exact location
tion for this design stage
The external representation of the element allows you to visually identify
Appearance
the type of component and its functional purpose
Modeling a multilayer element with one layer of conditional thickness equal
Single layer structure
to the total thickness of the element
Multilayer structure The element must be modeled multi-layered
Splitting into layers The element must be modeled with division into separate layers
The element is assigned or set by the additional attribute material according
to the documentation.
If at a certain stage of the project the material cannot be precisely defined,
then a more generalized material is assigned. For example, at the 3D con-
Materials cept stage, the class of concrete of reinforced concrete structures is un-
known; therefore, it is necessary to assign a concrete material without speci-
fying the class and grades.
Materials must be created using Assets suitable for the material type, and
have the correct properties in the Appearance tab.
Slope Model element has slopes
Page 15 of 155
Utilities systems
Belonging of a model element to any
System classification Text Systemic type of utilities systems from a lim-
ited list of types
The name of the system to which the
element belongs in accordance with
System name Text Systemic
the documentation in the format T11-
1, T1-2, etc.
Type, brand of equipment or device,
designation of a standard, technical
Type, brand, desig- conditions or other document in ac-
Text General
nation cordance with the utilities equipment
specification in the working docu-
mentation
Equipment code Text General Equipment, product, material code
Unit of measurement (kg, running
Unit of measurement Text General
meter, m2, m3, etc.)
Capacity of equipment or electrical
Capacity Capacity General
appliance
Page 18 of 155
In the absence of codes in the classifier necessary for the formation of the "Table of
the main parameters of the project" , the codes must be agreed with the Customer.The code "999"
is assigned to the elements of the model that are not involved in calculation of volumes and are
absent in the classifier.
Page 20 of 155
2.12.1. General
The elements of the BIM model shall have the parameters, according to the require-
ments of sections 3-6. Sections 2.12.2-2.12.3 describe the specifics of filling in the parameters
Floor and Building.
Section AR
Floor plans, roofs
Cuts, sections BIM-based
Facades
Typical nodes Drawing 2D View in Model
Specifications (edit) Automatic BOM calculation based on BIM model
Section AR (PSO album)
Floor plans, roofs
Cuts, sections BIM-based
Facades
Explication of premises Automatic BOM calculation based on BIM model
AI section (Design project)
Floor / room plans
Wall finishing plans
BIM-based
Flooring plans
Ceiling plans
Page 23 of 155
Electrical plans
Wall sweeps
Cuts, sections
Typical nodes Drawing 2D View in Model
Specifications (edit) Automatic BOM calculation based on BIM model
Sections KR, KZh, KM
Pit plans Drawing 2D view or at the discretion of the designer
Pit fencing plans
Foundation and pile field plans
Formwork plans
Wiring diagrams of prefabricated re- BIM-based
inforced concrete products
Layouts of metal structures
Cuts, sections
In the case of drawing reinforcement drawings in AutoCAD, it is neces-
Reinforcement drawings sary to ensure their full compliance with the formwork drawings of rein-
forced concrete structures performed in Revit
Typical nodes Drawing 2D View in Model
Specifications (edit) Automatic BOM calculation based on BIM model
Section KM (hinged facade systems)
Wiring diagrams of fastening ele-
ments (brackets, guides, etc.)
BIM-based
Cladding wiring diagrams
Fragments
Typical nodes Drawing 2D View in Model
Specifications (edit) Automatic BOM calculation based on BIM model
OV, VK, PT sections
Engineering systems plans
BIM-based
Cuts, sections
BIM-based
3D views of engineering systems
Note: Perform 3D views in standard isometric view in Autodesk Revit
Typical nodes
Drawing 2D View in Model
Structural, schematic diagrams
Specifications, bills of equipment
Automatic BOM calculation based on BIM model
and materials
Typical nodes
Structural, schematic diagrams
Drawing 2D View in Model
Single line diagrams
IDD schemes
Specifications, bills of equipment
Automatic BOM calculation based on BIM model
and materials
Page 25 of 155
Requirements for the modeling technology and the minimum permissible level of elab-
oration of the elements of the AR BIM model at various stages are given in Sections 3.2-3.16.
Page 26 of 155
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
LO
Conditional dimensions + +
Page 28 of 155
Planning and
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Exact dimensions + + +
Conditional location +
Exact location + + + +
Appearance + + + + +
Multilayer structure (allowed) + +
Splitting into layers + + +
Materials + + + +
Code as per classifier + + + ОС.СП.1.1.5
Material + + + + Gas silicate blocks
Area + + + + 8.4 m²
Volume + + + + 1.01 m³
Length + + + + 3,000 mm
Width + + + + 100 mm
LOI
3.3. Facade
• Facade modeling should be performed from separate walls - insulation and facade finishing
(Figure 3.3.1), it is allowed to use multi-layer walls at the stage of the 3D concept and at
step 1 of planning and design stage. The horizontal elements of the facade are modeled with
slabs.
• When assigning a code for the ebb and flow classifier, it is necessary to take into account
that if they are made of the same material as the facade, they are considered part of the
facade.
• Facade modeling must be carried out taking into account the "plastic" of the facade (except
for step 1 of planning and design stage and 3D-concept) and with separation by materials
(Figure 3.3.2).
Page 30 of 155
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions + +
Exact dimensions + + +
Conditional location + +
Exact location + + +
LOD G
Appearance + + + + +
Multilayer structure (allowed) + +
Splitting into layers + + +
Materials + + + +
"Plastic" of the facade + + +
Code as per classifier + + + ОС.ВО.2.4.3
Material + + + + Brick tile
LOI
Area + + + + 120.0 m²
Length + + + 2,000 mm
Page 31 of 155
Planning and
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Width + + + 20 mm
Substructure + + + N
Manufacturer + +
Building / Section + + + K1
Floor + + + 2-25
Set + + АР1
Page 32 of 155
Execut. model
Detail project
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions +
Exact dimensions + + + +
LOD G
Conditional location +
Exact location + + + +
Appearance + + + + +
Materials + + +
Code as per classifier + + + ОС.ЗП.2.2
Material + + + Steel door
Area + + + + 2.36 m² (opening area)
Width + + + + 1,040 mm (wall opening)
Height + + + + 2,270 mm (wall opening)
Width of the door leaf + + + 900 mm
Height of the door leaf + + + 2,200 mm
Glazed door with drop-down
Description + + +
LOI
threshold
Substructure + + + Y/N
Building / Section + + + K1
Floor + + + 3
Fire resistance + + + EI45
Manufacturer + +
Name + +
Brand + + D-1
Set + + АР1
Page 34 of 155
3.4.2. Window
• For windows in 3D, it is necessary to display opening lines (Figure 3.4.3).
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Conditional dimensions +
Exact dimensions + + + +
LOD G
Conditional location +
Exact location + + + +
Appearance + + + + +
Materials + + +
Code as per classifier + + + ОС.ЗП.1.2
Material + + + PVC
Area + + + + 3.24 m² (opening area)
Width + + + + 1,800 mm (wall opening)
Height + + + + 1,800 mm (wall opening)
LOI
Description + + +
Substructure + + + Y/N
Building / Section + + + K1
Floor + + + 3
Manufacturer + +
Page 35 of 155
Planning and
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Name + +
Brand + + Ok-1
Thermal conductivity + + 0,75 (м2 ∙ ℃)/Вт
Set + + АР1
Page 36 of 155
Execut. model
Detail project
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions + +
Exact dimensions + + +
LOD G
Conditional location + +
Exact location + + +
Appearance + + + + +
Materials + + + +
Code as per classifier + + + ОС.ВО.2.2.1
Area + + + + 7.5 m²
Length + + + + 2,500 mm
Unassigned
+ + + + 3,000 mm
height
External stained-glass window,
Description + + + aluminum profile, double-
LOI
glazed window
Substructure + + + Y/N
Building / Section + + + K1
Floor + + + 3
Brand + + В-1
Set + + АР1
Fire resistance + + EI45
Page 38 of 155
3.6. Floors
• Model separately from the structural slab (Figure 3.6.1) with the Slab tool.
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions + +
Exact dimensions + + +
Conditional location + +
Exact location + + +
LOD G
Appearance + + + +
Single layer structure (al-
+ +
lowed)
Multilayer structure + + +
Materials + + +
Page 39 of 155
Planning and
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Slope + +
Code as per classifier + + + ОС.ОТ.2.2
Area + + + 20.0 m²
Volume + + + 1.6 m³
Thickness + + + 80 mm
1. Laminate
Composition of multi-layer
+ + + 2. Substrate
structure
LOI
3. Coupler - 80 mm
Substructure + + + Y/N
Building / Section + + + K1
Floor + + + 3
1 [type of floor according to
Brand + +
floor legend]
Set + + АР1
Page 40 of 155
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Conditional dimensions + +
Exact dimensions + + +
Conditional location
Exact location + + + + +
LOD G
Appearance + + + + +
Materials + + +
As part of a multi-layer wall
+ +
(allowed)
Modeling a separate wall + + +
Code as per classifier + + + ОС.ОТ.3.2
Material + + + Plasterwork
Area + + + 12.0 m²
Width + + + 20 mm
LOI
Planning and
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Floor + + + 3
Set + + АР1
Page 42 of 155
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Conditional dimensions + +
Exact dimensions + + +
LOD G
Conditional location + +
Exact location + + +
Appearance + + + +
Materials + + +
Code as per classifier + + + ОС.СП.2
Area + + + 12.0 m²
Thickness + + 62.5 mm
Composition of multi-layer 1. Subsystem - 50 mm
+ + +
structure 2. Plasterboard sheet - 12.5 mm
LOI
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions
Not modelled
Not modelled
Not modelled
Exact dimensions
LOD G
Conditional location
Exact location
Appearance
Page 43 of 155
Planning and
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Materials + +
Code as per classifier + + ОС.ОТ.4.2
Material + + Plasterwork
Area + + 12.0 m²
LOI
Substructure + + Y/N
building + + K1
Floor + + 3
Set + + АР1
Page 44 of 155
3.9. Roof
• Modeling the roof with a multi-layer tool Roof along the contour separately from the struc-
tural floor (Figure 3.9.1).
Execut. model
Detail project
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions + +
Exact dimensions + + +
Conditional location + +
Exact location + + +
LOD G
Appearance + + + +
Single layer structure +
Multilayer structure + + + +
Materials + + + +
Slope + + +
Code as per classifier + + + ОС.ВО.1.2
Area + + + + 8 m²
Thickness + + + + 280 mm
Composition of multi-layer
+ + +
LOI
structure
Substructure + + + N
Building / Section + + + K1
Floor + + + 3
Set + + АР1
Page 46 of 155
• The families have modeled "Service Areas" that should not intersect with other furniture
elements (Figure 3.10.4). For a description of the checks, see the Clash Checks section.
Page 48 of 155
• A description of the LOD G level of graphical detail and LOI content is given in Table
3.10.1.
Table 3.10.1 - The level of elaboration of furniture
Planning and
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Conditional dimensions
Exact dimensions + + + + +
LOD G
Conditional location
Exact location + + + + +
Appearance + + + + +
Code as per classifier + + + + +
Material + + + + +
Name + + + + + Double bed
Length + + + + + 2,000 mm
Width + + + + + 1,800 mm
LOI
Height + + + + + 500 mm
Service zone + + + + + 500 mm
Comfort + + + + + Y
Business + + + + + Y
Premium + + + + + Y
Premise type + + + + + Master bedroom
Page 50 of 155
3.11. Parking
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions
Exact dimensions + + + + +
LOD G
Conditional location + +
Exact location + + +
Appearance + + + + +
Code as per classifier + + + ЗН.ММ.1.1
Area + + + + + 13.25 m²
LOI
Height + + + + + 2,200 mm
Width + + + + + 2,500 mm
Length + + + + + 5,300 mm
Page 51 of 155
• Also, for the correct calculation of the technical and economic indicators, it is necessary to
simulate the parking lots with the Premise tool (Figure 3.11.2). Can be performed in a
separate stage of Revit.
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions
Exact dimensions + + + + +
Conditional location
Exact location + + + + +
LOD G
Number + + + М001
Name + + + + + Parking lot
Area + + + + + 18.00 m²
Building / Section + + + + + Parking
Floor + + + + + -2
Facility ID + + + Do not fill
Page 52 of 155
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Conditional dimensions
Exact dimensions + + + + +
LOD G
Conditional location + +
Exact location + + +
Appearance + + + + +
LOI
3.12. Premises
• The presence in the models of premises not provided for by design solutions is not allowed.
• The rules for defining the boundaries of areas and simulated areas are described in the sec-
tion3.14 "Rules for modeling technical and economic indicators".
• When assembling a summary BIM model, a room and a zone must be unloaded into a
separate model and added to the summary model tree. To export rooms and zones using the
IFC format (see the Section 8.2), which allows them to be unloaded with volumetric ele-
ments.
• The area of premises / apartments / suites on the floor plans should be indicated with an
accuracy of two decimal places.
• For additional requirements for premise numbering and marking, see Appendix 4 (section
2.8).
• A description of the LOD G and LOI is given in Table 3.12.1.
Table 3.12.1 - The level of elaboration of the premises
Planning and
Execut. model
design stage Detail project
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions
LOD G
Exact dimensions + + + + +
Conditional location
Exact location + + + + +
Code as per classifier + + + + + ПМ.ЖЛ.3.1
Number + + + 001
Name + + + + + Bedroom
Area + + + + + 18.50 m²
Perimeter + + + 12,200 mm
Total height + + + 2,800 mm
Apartment number + + + + + 50
Premise area factor + + + + + 1
LOI
Planning and
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Facility ID + + + Do not fill
Page 55 of 155
3.13. Zones
• Zones should be modeled using Zoning plans and the Zone Boundaries tool with contin-
uous, closed contours without line breaks or overlaps.
• The rules for defining the boundaries of areas and simulated areas are described in the sec-
tion3.14 "Rules for modeling technical and economic indicators".
• When assembling a summary BIM model, a room and a zone must be unloaded into a
separate model and added to the summary model tree. To export rooms and zones using the
IFC format (see the Section 8.2), which allows them to be unloaded with volumetric ele-
ments.
• A description of the LOD G and LOI is given in Table 3.13.1.
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Conditional dimensions
LOD G
Exact dimensions + + + + +
Conditional location
Exact location + + + + +
Code as per classifier + + + + + ЗН.ЛФ.2
Name + + + + + Total area by sum of areas
Area + + + + + 245 m²
LOI
Substructure + + + + + Y/N
Building / Section + + + + + K1
Floor + + + + + 3
Page 56 of 155
3.14.1. General
It is necessary to simulate the types of areas listed in table 3.14.1.
Table 3.14.1 - Simulated areas
3.14.2. The total floor area of the building in the dimensions of the
outer walls (DOW)
The total floor area of a building in the dimensions of the outer walls (DOW) is the
sum of the areas of the ground floors of the building, measured along the outer edge of the outer
walls (along the boiler casing).
In a multi-section building, the wall separating the sections is included in the floor
area. When calculating the floor area for each section, count the total wall of adjacent sections
along the wall axis.
Page 59 of 155
Pos. 1 - The floor area is determined by the inner surfaces of the enclosing structures
of the outer walls, excluding finishing (plaster is included in the floor area). With front glazing
and "windows to the floor", the area is considered up to the post-transom system and the frame
at the "clean floor" level.
Page 60 of 155
Pos. 2 - Internal vertical structures adjacent to external walls - are included in the floor
area and are counted per cut.
Pos. 3 - recessed balconies, balconies, terraces are included in the floor area with factor
= 1. The area is determined by their dimensions, measured along the inner contour (between
the building wall and the fence), excluding the area occupied by the fence.
Pos. 4 - The technical balcony, designed to accommodate engineering equipment - is
not included in the floor area.
Pos. 5 - Walls, partitions, elevator and communication shafts - are included in the floor
area.
Pos. 1 - The usable area of apartments and suites is the sum of living rooms and aux- iliary
rooms measured between the finished surfaces of walls and partitions at the "finished floor"
level (excluding skirting boards).
Page 61 of 155
Pos. 2 - recessed balconies, balconies and terraces are included in the Living Space.
The area is determined by their dimensions, measured along the inner contour (between the
building wall and the fence), excluding the area occupied by the fence. For apartments, the area
should be calculated taking into account the reduction factor: recessed balconies factor = 0.5;
balconies and terraces factor = 0.3. For suites without factor.
Pos. 3 - Shafts inside the apartment are not included in the usable area.
Pos. 4 - Storerooms are included in the usable area.
Page 62 of 155
Figure 3.14.5
поз. 1 Pos. 1
поз. 2 Pos. 2
поз. 3 Pos. 3
поз. 4 Pos. 4
поз. 5 Pos. 5
поз. 6 Pos. 6
Pos. 1 - For facade glazing, the usable area is considered to be up to the mullion-
transom system at the level of the top of the floor slab, for walls - up to the wall material.
Pos. 2 - recessed balconies, balconies and terraces that have a connection with the
useful area are included in the useful area with a factor = 1. The area must be determined by
their dimensions, measured along the inner contour (between the building wall and the fence),
excluding the area occupied by the fence.
Pos. 3 - Elevator, communication shafts, taking into account their fencing - are not
included in the usable area.
Page 64 of 155
Pos. 4 - Technical premises serving only this floor, auxiliary premises - are included
in the usable area.
Pos. 5 - Technical premises serving several floors or the entire building, as well as
communal premises for access to these premises - are not included in the usable area.
Pos. 6 - All erected vertical structural elements (columns, walls, partitions) are not
included in the usable area.
"Voids" and openings in the floor slab over 36 m2 are not included in the usable area.
Pos. 1, 2 - The area of the shaft is detershaftd by the inner edge of the enclosing wall
(partition).
Page 66 of 155
Constructions
Floor
Communal
Communal
Technical
Technical
premises
premises
premises
premises
%
General
Useful
shafts
shafts
• When modeling interiors, you should also be guided by the requirements of the sections3.2
-3.12 (links are given in table 3.16.1).
Table 3.16.1 - The level of elaboration of the interior model
LOD G LOI
Thickness / Thickness
Code as per classifier
Splitting into layers
Model element
Material / Material
Building / Section
Exact dimensions
Premise number
Length / Length
Height / Height
Width / Width
Exact location
Manufacturer
Appearance
Area / Area
Materials
Brand
Name
Floor
Set
Existing constructions Loaded with linked files AS, KS
Premises + + See Table 3.12.1 (Detail project stage)
Partitions + + + + See Table 3.2.1 (Detail project stage) +
Holes and niches in
+ + + + +
partitions
Interior doors + + + + See Table 3.4.1 (Detail project stage) +
Hatches + + + + + + + + + + + + + + + + +
Door portals slopes + + + + + + + + + + + + + +
Wall finishing + + + + + See Table 3.7.1 (Detail project stage) +
Floors + + + + + See Table 3.6.1 (Detail project stage) +
Skirting boards + + + + + + + + + + + + + +
Ceilings + + + + See Table 3.8.1 (Detail project stage) +
Ceiling finishing + + + + + See Table 3.8.2 (Detail project stage) +
Power outlets and light switches + + + + + + + + + + + + +
Sensors, sirens + + + + + + + + + + + + +
Call panels + + + + + + + + + + + + +
Lighting devices + + + + + + + + + + + + + + + +
Traffic signs, information signs + + + + + + + + + + + + +
Decor elements + + + + + + + + + + + + +
Page 69 of 155
4.1. General
• Table 4.1.1 shows the stages in the creation of models for the general plan, landscaping and
external networks.
Table 4.1.1 - The composition of the models of the general plan, improvement and external networks
Planning and design Detail
Sec- 3D con- stage Exec.
Model element project
tion cept model
Step 1 Step 2-3 stage
4.2 Topology and zoning of the site − + + +
Surrounding buildings − − + +
4.3
Beautification − − + +
4.4 Geological report − − + +
4.5 External engineering networks − − + +
Page 70 of 155
Existing relief
• Civil 3D Object Type: 3D surface, Breaklines (Feature lines, polylines, shapes).
• The following properties are required: Layout, Surface Name, and Surface Elevation.
• The existing relief is displayed as a 3D surface with all complex relief elements, in suffi-
cient detail for further work.
• The result of processing the data of topographic and geodetic surveys should be a relief
digital model (RDM).
• The RDM is formed by the TIN Surface object. RDM should be generated on 3D faces; if
there are no 3D faces in geodetic survey files, AutoCAD objects should be converted to
COGO points, which should then be attached to the surface.
• It is not allowed to form a RDM by transferring text labels to their mark and attaching texts
to the surface.
• The names and marks must match the names and marks of the existing utilities.
• Accept the marks of the missing depths according to the standards.
• The intersection of existing engineering networks is not allowed.
• Requirements for the modeling technology and the minimum permissible level of elabora-
tion of the elements of the BIM model of the CS at various stages are given in the sec-
tions5.2 -5.14 ...
Page 75 of 155
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Conditional dimensions
Exact dimensions + + +
LOD G
Conditional location
Exact location + + +
Appearance + + +
Materials + + +
Not modelled
Not modelled
Volume* + + +
Substructure + + + Y
Building / Section + + + Stylobate
Floor + + + Foundation
Set + + КР1
* - parameters are filled in depending on the type of element and material
• Modeling foundation slabs with single-layer elements with the Foundation: Slab tool.
• Foundation slabs must be divided into expansion joints (except for stage 1 of planning and
design stage). Slabs separated by seams must be separate elements; it is not allowed to draw
seams in the slab sketch.
• Thickening of foundation slabs, as well as complex pits, can be modeled with context fam-
ilies (Figure 5.3.1) of the category Structural foundation.
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Conditional dimensions + +
Exact dimensions + + +
LOD G
Conditional location + +
Exact location + + +
Appearance + + +
Materials + + + + +
Code as per classifier + + + ОС.КЭ.1.1.1
Thickness + + + + 1,200 mm
Material + + + Concrete B35
Volume + + + 1,620 m³
100 kg / m³
LOI
Reinforcement bars
+
throughput
Substructure + + + Y
Building / Section + + + Stylobate
Floor + + + Foundation
Brand + + ФП-1
Page 77 of 155
Planning and
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Set + + КЖ0
Page 78 of 155
5.4. Piles
• Model piles with loadable families.
• A description of the LOD G level of graphical detail and LOI content is given in Table
5.4.1.
Table 5.4.1 - The level of development of piles
Planning and
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Conditional dimensions Step 1
Exact dimensions + + +
LOD G
Conditional location
Exact location + + +
Appearance + + +
Materials + + +
Code as per classifier + + + НЦ.КТ.4.2.1
Not modelled
Not modelled
Substructure + + + Y
Building / Section + + + Stylobate
Floor + + + Foundation
Brand + + C-1
Set + + КЖ0
Page 79 of 155
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Conditional dimensions + +
Exact dimensions + + +
LOD G
Conditional location + +
Exact location + + +
Appearance + + + + +
Materials + + + + +
Code as per classifier + + + ОС.КЭ.2.1
Material + + + + Concrete B35
Volume + + + + 1.68 m³
Length + + + 3,000 mm
Width + + + 200 mm
Reinforcement bars
LOI
+ 120 kg / m³
throughput
Substructure + + + Y/N
Building / Section + + + K1
Floor + + + 3
Brand + + Ст-1
Set + + КЖ1
Page 80 of 155
Execut. model
Detail project
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions + +
Exact dimensions + + +
LOD G
Conditional location + +
Exact location + + +
Appearance + + + + +
Materials + + + + +
Code as per classifier + + + ОС.КЭ.2.2
Material + + + + Concrete B35
Volume + + + + 0.48 m³
Length + + + 1,000 mm
Width + + + 200 mm
Reinforcement bars 200 kg / m³
LOI
+
throughput
Substructure + + + Y/N
Building / Section + + + K1
Floor + + + 3
Brand + + K-1
Set + + КЖ1
Page 81 of 155
Execut. model
Detail project
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions + +
Exact dimensions + + +
LOD G
Conditional location + +
Exact location + + +
Appearance + + + + +
Materials + + + + +
Code as per classifier + + + ОС.КЭ.3.1
Material + + + + Concrete B35
Volume + + + + 525.1 m³
Thickness + + + 200 mm
Reinforcement bars 180 kg / m³
+
LOI
throughput
Substructure + + + Y/N
Building / Section + + + K1
Floor + + + 3
Brand + + PM-1
Set + + КЖ1
Page 83 of 155
h балки h beams
• A description of the LOD G level of graphical detail and LOI content is given in Table
5.8.1.
Table 5.8.1 - The level of elaboration of reinforced concrete beams
Planning and Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Conditional dimensions + +
Exact dimensions + + +
LOD G
Conditional location + +
Exact location + + +
Appearance + + + + +
Materials + + + + +
Code as per classifier + + + ОС.КЭ.3.3
Material + + + + Concrete B35
Volume + + + + 0.06 m³
Width + + + 200 mm
Height + + + 500 mm
LOI
Substructure + + + Y/N
Building / Section + + + K1
Floor + + + 3
Brand + + BM-1
Set + + КЖ1
Page 84 of 155
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Conditional dimensions + Step 1
+
Exact dimensions + + +
LOD G
Conditional location + +
Exact location + + +
Appearance + + + + +
Materials + + +
Code as per classifier + + + ОС.КЭ.4.1
Material + + + С235
Length + + + 3,000 mm
Weight + + + 23.1 kg
Substructure + + + Y/N
Building / Section + + + K1
LOI
Floor + + + 3
Brand + + B-1
Set + + КЖ1
Type of fire protection + +
Thickness of fire protec-tion
+ +
Fire resistance + +
Page 85 of 155
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Conditional dimensions + + +
Exact dimensions
LOD G
Conditional location + + +
Exact location
Appearance + + +
Not modelled
Not modelled
Materials + + +
Code as per classifier + + + НЦ.ИЗ.2.1
Material + + + Waterproofing
Area + + + 1,320 m²
LOI
Substructure + + + Y
Building / Section + + + Stylobate
Floor + + + -2
Set + + КЖ1
Page 87 of 155
5.12. Stairway
• At the concept and step 1 of planning and design stage, stairs can be performed in the AS
model using the standard Revit tool.
• At steps 2-3 of planning and design stage and at detail project stage, prefabricated staircases
should be modeled with loadable families, monolithic staircases - with contextual or
loadable families.
• Interfloor platforms are performed with the Overlap tool.
• A description of the LOD G and LOI is given in Table 5.12.1.
Table 5.12.1 - The level of elaboration of reinforced concrete stairs
Planning and
Execut. model
Detail project
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions
Exact dimensions + + +
LOD G
Conditional location
Exact location + + +
Developed in the AS model
Appearance + + +
Code as per classifier + + + ОС.КЭ.3.6.1
Material + + + Concrete B25
Volume + + + 0.5 m³
Substructure + + + Y/N
LOI
Building / Section + + + K1
Floor + + + 3
Brand + + Lm-1
Set + + КЖ1
Page 88 of 155
5.13. Ramps
• A description of the LOD G and LOI is given in Table 5.13.1.
Table 5.13.1 - The level of elaboration of reinforced concrete ramps
Planning and
Execut. model
Detail project
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions + +
Exact dimensions + + +
LOD G
Conditional location + +
Exact location + + +
Appearance + + + + +
Code as per classifier + + + ОС.КЭ.3.7
Material + + + + Concrete B25
Volume + + + + 3.1 m³
Substructure + + + Y/N
LOI
Building / Section + + + K1
Floor + + + 3
Brand + + Rm-1
Set + + КЖ1
Page 89 of 155
• The composition of the facade model and the required level of LOD G and LOI is given in
Table 5.14.1.
Table 5.14.1 - The level of elaboration of the structures of hinged facade systems
LOD G LOI
Thickness / Thickness
Code as per classifier
Material / Material
Model element
Building / Section
Exact dimensions
Length / Length
Height / Height
Width / Width
Exact location
Stock number
Manufacturer
Appearance
Area / Area
Materials
Volume
Name
Set
Brackets + + + + + + + + + + + +
Guides,
+ + + + + + + + + + + +
metal profiles
Anchors for fastening of
+ + + + + + + + +
brackets to the building
Facade cladding + + + + + + + + + + + + + + +
Insulation + + + + + + + + + + + + +
External slopes + + + + + + + + + + + +
Ebb + + + + + + + + + + + +
Covering elements of parapets + + + + + + + + + + + +
Cover strips and other decorative
+ + + + + + + + + + + +
elements made of sheet metal
Page 91 of 155
• Requirements for the modeling technology and the minimum permissible level of elabora-
tion of the elements of the BIM-model of internal engineering systems at various stages are
given in Sections 6.2-6.10.
• All engineering elements must be connected within their system, and elements of engineer-
ing equipment must contain fixed points of connection to engineering networks.
Page 93 of 155
Execut. model
design stage Detail project
Concept
stage Example
filling
Step 2-3
Step 1
Conditional dimensions + +
Exact dimensions + + +
LOD G
Conditional location + +
Exact location + + +
Appearance + + +
Code as per classifier + + + IS.BS.1
System classification + + + + Supply air
System type + + + + Support
System name + + + PD1
Width + + + 700 mm
Height + + + 300 mm
LOI
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Conditional dimensions + +
Exact dimensions + + +
LOD G
Conditional location + +
Exact location + + +
Appearance + + +
Slope (for sewage pipes) + + +
Code as per classifier + + + ИС.ТС.1
System classification + + + + Return fluid
Material + + +
System type + + + + Heating_Return
System name + + + Т21
LOI
Diameter + + + 40 mm
Length + + + 12,000 mm
Name + +
Brand + +
Equipment code + +
Page 95 of 155
Planning and
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Manufacturer + +
Page 96 of 155
Execut. model
Detail project
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions +
Exact dimensions + +
LOD G
Conditional location +
Exact location + +
Appearance + + +
Code as per classifier + + +
System classification + + + Supply fluid, Return fluid
System name + + + Т11,Т21
Length + + 600 mm
Not modelled
Not modelled
Height + + 500 mm
Width + + 100 mm
Capacity + + + 800 W
LOI
Building / Section + + + K1
Floor + + + 3
Name + +
Brand + +
Equipment code + +
Manufacturer + +
Unit of measurement + +
Links to certificates and pass-
+
ports
Page 97 of 155
6.5. Equipment
• It is necessary to model the service areas of the main equipment with the volumetric ele-
ments of the model with a translucent material. It is allowed to perform service areas with
a nested family of the Generalized Model category. To assign the ИС.ЗО.1.1 classifier to
the zones.
• A description of the LOD G graphical detail level and LOI payload is given in Table 6.5.1.
Table 6.5.1 − The level of elaboration of equipment
Planning and
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Step 1
Conditional dimensions + +
Exact dimensions + +
LOD G
Conditional location + +
Exact location + +
Appearance + + +
Service zone + + + +
Code as per classifier + + +
System classification + + +
System name + + +
Not modelled
Capacity + +
Weight + +
Building / Section + + + K1
LOI
Floor + + + 3
Name + +
Brand + +
Equipment code + +
Manufacturer + +
Unit of measurement + +
Links to certificates and pass-
+
ports
Page 98 of 155
Execut. model
Detail project
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions +
Exact dimensions + +
LOD G
Conditional location +
Exact location + +
Appearance + + +
Code as per classifier + + +
Sewage, cold water supply (in-
System classification + + +
ternal networks)
Not modelled
Not modelled
Name + +
Brand + +
Equipment code + +
Manufacturer + +
Unit of measurement + +
Links to certificates and pass-
+
ports
Page 99 of 155
Execut. model
Detail project
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions +
Exact dimensions + +
LOD G
Conditional location +
Exact location + +
Appearance + + +
Code as per classifier + + +
System classification + + Exhaust air
System name + + В1
Length + + 300 mm
Width + + 300 mm
Not modelled
Not modelled
Flow rate + +
Building / Section + + K1
Floor + + 3
Name + +
Brand + +
Equipment code + +
Manufacturer + +
Unit of measurement + +
Links to certificates and pass-
+
ports
Page 100 of 155
Execut. model
Detail project
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions +
Exact dimensions + + +
LOD G
Conditional location +
Exact location + + +
Appearance + + +
Code as per classifier + + +
Not modelled
Width + + + 300 mm
Height + + + 50 mm
Length + + + 3,000 mm
LOI
Name + +
Brand + +
Equipment code + +
Manufacturer + +
Unit of measurement + +
Page 101 of 155
Execut. model
Detail project
design stage
Concept
stage
Example
filling
Step 2-3
Conditional dimensions Step 1
Exact dimensions + + +
LOD G
Conditional location
Exact location + + +
Appearance + + +
Not modelled
Not modelled
Brand + +
Equipment code + +
Manufacturer + +
Unit of measurement + +
6.10. Boards / cabinets, electrical and lighting devices
• A description of the LOD G level of graphical detail and LOI content is given in
Table6.10.1.
Table 6.10.1 − The level of elaboration of electrical equipment
Planning and
Execut. model
Detail project
design stage
Concept
stage
Example
Step 2-3
filling
Step 1
Conditional dimensions +
Exact dimensions + + +
LOD G
Conditional location +
Exact location + + +
Appearance + + +
Service zone + + + +
Code as per classifier + + +
model
Not
led
Length + +
Width + +
Height + +
O
L
Name + +
Brand + +
Equipment code + +
Manufacturer + +
Unit of measurement + +