Professional Documents
Culture Documents
Gauze pads (at least 4 x 4 inches).Two large gauze pads (at least 8 x 10
inches); Box adhesive bandages (band-aids); One package gauze roller
bandage at least 2 inches wide; Two triangular bandages; Wound cleaning
First Aid Kits agent such as sealed moistened towelettes; Scissors; At least one blanket;
Tweezers; Adhesive tape; Latex gloves; Resuscitation equipment such as
resuscitation bag, airway, or pocket mask; Two elastic wraps; Splint; Directions
for requesting emergency assistance.
All sizes for Safety Shoes; Safety Helmet; Safety Vest; Working Gloves;
Personal Protective Equipments
Rubber Boots; Rain Coats
Signages PPE Signage (4'x8'), Safety First (4'x4'), Warning Signs (2'x3')
PART A EARTHWORKS
ITEM No DESCRIPTION Cocolumber MATERIALS EQUIPMENTS Sizes = 2"x2", 2"x3",2"x4"; Length = 8ft to 12ft
SPECIFICATIONS
Ordinary Plywood Size = 4"x8"; Thickness = 1/4"
PART C FINISHING
Prior to the laying of your foundations, the ground beneath your future home
needs to be treated for subterranean termites. The soil poisoning process
Soil Poisoning involves the drilling of holes – one meter apart – around the perimeter of the
foundations. Termiticides are then pumped into the soil in order to saturate the
ground.
Door Material: 8mm thk. Tinted or light reflective, tempered glass (gray) +
Aluminum Framed Glass Doors 12mm air gap + 6mm thk. Clear tempered glass; Aluminum frame on powder
coated finish
Door Material: 8mm thk. Tinted or light reflective, tempered glass (gray) +
Aluminum Framed Glass Windows 12mm air gap + 6mm thk. Clear tempered glass; Aluminum frame on powder
coated finish
Single leaf solid core swing wood door, hollow core wood door in laminate
Doors (Wood Panel)
finish
1051(6) Railing
2"x3" Pre fabricated wooden handrail on 2"x2"x1.2mm thk Vertical Supports
Interior Handrail
and 1"x1"x1.2mm thk Horizontal Supports, paint finished
Cement Type 1P; Weigth = 40kg; The cement-sand ratio for wall plastering
Portland Cement
with 12mm thickness would be 1:4, for one part of cement four part of sand.
Fiber Cement Board 4.5mm thk. Fiber Cement Board, Paint Finished
ITEM No DESCRIPTION MATERIALS EQUIPMENTS Laminated Board, Floor anchored, Door = 600mm wide, 1720 high and 12mm
SPECIFICATIONS
thk; Pilaster = 1820mm high , 12mm thk; Side Divider = 1820 high, 12mm thk.;
Middle Divider = 1800mm high, 12mm thick; Urinal = It has a 12 mm thick High
Modular Partition
Pressure Laminates (HPL) Compact Board, with a recommended panel width
dimensions of 400-500 mm. The size of the UMP is 500 mm (W-Top) X 400
mm (W-Bottom) X 1200 mm (H), with the overall height of 1200 mm.
1003(3) Cabinets Marine Plywood Thickness = 3/4" thk., painted Duco finish
Fully concealed flush looking appearance; Soft closing, snap-on design and
cam adjustable; Hinge 100 degree with integrated damper; Adjustable in 3
directions (1mm)
Concealed Hinges
-Up and down
-Left and right
-In and out
1018 Tileworks
Non skid tiles Sizes = 60cmx60cm non skid ceramic for exterior tiles
High quality tile joint filler for all tile and stoneware with a tile joint width of 2-
ABC Grout
6mm
Cement Type 1P; Weigth = 40kg; The cement-sand ratio for tile works would
Portland Cement
be 1:4, for one part of cement four part of sand.
Skim coats mixed up to 4.0 quarts (3.8L) of water per 20-lb (9.1-kg) bag. Do
not exceed 4.0 quarts (3.8 L) of water per bag. Place water in the mixing
Skim Coat container. While mixing, add SKIM COAT and mix for the minimum amount of
time required to achieve a lump-free, uniform consistency (usually 1 to 3
minutes).
100% acrylic water-based semi-gloss paint for an interior and exterior finish. It
is formulated with highest quality materials that provide excellent color and
Paints gloss retention and tenacious adhesion. It is suitable for residential, hospital,
restaurants, buildings and other commercial establishment.2 coatings of Semi
Gloss Latex paints with tinting color (As per approved color of End User)
Heavy-duty roof that can withstand the tortures of heat and rain. It is designed
Rib Type Roof with tough applications and enhanced painting process that gives more
protection against rust; Thickness = 0.427mm; Width = 1070mm
C-Purlins/ Lip Channel Purlins Size = 2" x 4", Thickness = 1.2mm, paint finished
Angle Bar Size 1 1/2" x 1 1/2" - 2" x 2", Thickness = 5mm, paint finished
Not less than 12mm thk. plate fastened to a permanent member either by bolts,
Gusset Plate
rivets or welding or a combination of the three, paint finished
Not less than 12mm thk. plate fastened to a permanent member either by bolts,
Steel Plate
rivets or welding or a combination of the three, paint finished
Turn Buckle Standard sized turnbuckle
Sag Rod, Round Bars 12mm plain bar, paint finished
Water Closet, including fittings and acc. w/ Bidet Made of stable porcelain, and fittings.
Urinal including fittings and acc. Made of stable porcelain, and fittings.
MATERIALS SPECIFICATION
Outlets 2 Gang
Miscellaneous Tape, bolt & nuts, terminal lugs, cover lamps, etc.
Main Board 2 Pole Plugin Type, 6 Branches, Single Phase High Quality
Panel Board 2 Pole Plugin type, 26 Branches, Single Phase High Quality
Plugin/ Bolt-on type Circuit breaker, Capacities: 15A, 20A, 30A, 60A, 125A and
Circuit Breakers
250A
Pin Lights 4" LED Circular/ Square Downlights (12-15W), Recessed and Ceiling Mounted
LED Wall Lamp Modern LED Wall Lamp, durable and weather proof, 12-15W
Airconditioning (Package/Split Type) 2.0hp Airconditioning Unit, Split type, Inverter, 220V