Professional Documents
Culture Documents
Lhb645n-Db - DGBRLLC Web Eng
Lhb645n-Db - DGBRLLC Web Eng
3D Blu-ray™ / DVD
Home Cinema
System
www.lg.com
Copyright © 2017-2019 LG Electronics Inc. All Rights Reserved.
Getting Started 3
Getting Started
The openings shall never be blocked by placing
CAUTION: TO REDUCE THE RISK OF ELECTRIC the product on a bed, sofa, rug or other similar
SHOCK DO NOT REMOVE COVER (OR BACK) NO surface. This product shall not be placed in a built-
USER-SERVICEABLE PARTS INSIDE REFER SERVICING in installation such as a bookcase or rack unless
TO QUALIFIED SERVICE PERSONNEL. proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
This lightning flash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure CAUTION: This product employs a Laser System.
that may be of sufficient To ensure proper use of this product, please read
magnitude to constitute a risk of this owner’s manual carefully and retain it for future
electric shock to persons. reference. Shall the unit require maintenance,
The exclamation point within an contact an authorized service center.
equilateral triangle is intended Use of controls, adjustments or the performance of
to alert the user to the presence procedures other than those specified herein may
of important operating and result in hazardous radiation exposure.
maintenance (servicing) To prevent direct exposure to laser beam, do not
instructions in the literature try to open the enclosure.
accompanying the product.
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
case of an emergency, the Power Plug must remain
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
readily accessible.
OR MOISTURE.
Check the specification page of this owner’s manual
WARNING: Do not install this equipment in a
to be certain of the current requirements. Do not
confined space such as a book case or similar unit.
overload wall outlets. Overloaded wall outlets, loose
NOTICE: For safety marking information including or damaged wall outlets, extension cords, frayed
product identification and supply ratings, please power cords, or damaged or cracked wire insulation
refer to the main label on the bottom or the other are dangerous. Any of these conditions could result
surface of the product. in electric shock or fire. Periodically examine the
CAUTION: The apparatus shall not be exposed to cord of your device, and if its appearance indicates
water (dripping or splashing) and no objects filled damage or deterioration, unplug it, discontinue use
with liquids, such as vases, shall be placed on the of the device, and have the cord replaced with an
apparatus. exact replacement part by an authorized service
center. Protect the power cord from physical or
CAUTION: Do not use high voltage products
mechanical abuse, such as being twisted, kinked,
around this product. (ex. Electrical swatter) This
pinched, closed in a door, or walked upon. Pay
product may malfunction due to electrical shock.
particular attention to plugs, wall outlets, and the
CAUTION: No naked flame sources, such as lighted point where the cord exits the device.
candles, should be placed on the apparatus.
4 Getting Started
Getting Started
recorded in the NTSC colour system, the image is
analog signal output, etc., of AACS protected
output as an NTSC signal.
content. The operation of this product and
restrictions on this product may vary depending Only the multi system colour TV can receive all
on your time of purchase as those restrictions signals output from the player.
may be adopted and/or changed by AACS after yy If you have a PAL colour system TV, you will see
the production of this product. just distorted images when using discs or video
yy Furthermore, BD-ROM Mark and BD+ are contents recorded in NTSC.
additionally used as content protection systems yy The multi system colour TV changes the colour
for Blu-ray Disc format, which imposes certain system automatically according to input signals.
restrictions including playback restrictions for In case that the colour system is not changed
BD-ROM Mark and/or BD+ protected content. To automatically, turn it off and then on to see
obtain additional information on AACS, BD-ROM normal images on screen.
Mark, BD+, or this product, please contact an
yy Even if the disc recorded in NTSC colour system
authorized Customer Service Center.
are well displayed on your TV, these may not be
yy Many BD-ROM/DVD discs are encoded with recorded correctly on your recorder.
copy protection. Because of this, you should only
connect your player directly to your TV, not to a >>Caution
VCR. Connecting to a VCR results in a distorted yy Watching a 3D content for a long period
picture from copy-protected discs. time may cause dizziness or tiredness.
yy This product incorporates copyright protection yy It is not recommended to watch a movie
technology that is protected by U.S. patents in 3D mode for infirm, child and pregnant
and other intellectual property rights. Use of woman.
this copyright protection technology must be yy If you are experiencing headache, tiredness
authorized by Rovi Corporation, and is intended or dizziness while viewing content in 3D,
for home and other limited viewing uses only it is strongly recommended to stop the
unless otherwise authorized by Rovi Corporation. playback and rest until you feel normal.
Reverse engineering or disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
6 Table of Contents
5 Troubleshooting
4
55 Troubleshooting
55 – General
56 – Network
57 – Picture
57 – Sound 5
57 – Customer Support
57 – OPEN SOURCE SOFTWARE NOTICE
INFORMATION
6
6 Appendix
58 Controlling a TV with the Supplied
Remote Control
58 – Setting up the remote to control your
TV
59 Network Software Update
59 – Network update notification
59 – Software update
61 Additional Information
61 – File requirement
62 – AVCHD (Advanced Video Codec High
Definition)
Some of the content in this manual may differ from your player depending on the software of the
player or your service provider.
8 Getting Started
Introduction
Getting Started
yy Depending on the recording software & the
finalization, some recorded discs (CD-R/RW, Regional code
DVD±R/RW, BD-R/RE) may not be playable. This unit has a regional code printed on the unit.
yy BD-R/RE, DVD±R/RW and CD-R/RW discs This unit can play only BD-ROM or DVD discs
recorded using a personal computer or a labeled same as the unit or “ALL”.
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens. System Select
yy If you record a disc using a personal You must select the appropriate system mode for
computer, even if it is recorded in a your TV system. Open the disc tray using the B
compatible format, there are cases in which (OPEN/CLOSE) button and then, press and hold M
it may not play because of the settings of (PAUSE) for more than five seconds to be able to
the application software used to create the select a system (PAL, NTSC, AUTO)
disc. (Check with the software publisher for
more detailed information.)
yy This player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
yy Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
yy Customers should note that permission
is required in order to download MP3 /
WMA files and audio from the Internet.
Our company has no right to grant such
permission. Permission should always be
sought from the copyright owner.
yy You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. When setting
the option to Live System, you cannot use
it on LG player. (Mastered/Live File System :
Disc format system for windows Vista)
10 Getting Started
Remote Control
1 • • • • • • a • • • • • • • • • • • • c • • • • • •
FUNCTION: Changes input mode. SPEAKER LEVEL: Sets theFUNCTION
sound
Getting Started
FUNCTION FUNCTION
Front Panel
a b c
1
Getting Started
d
Rear Panel
a b c d e fg h
d e
A
D
E
A A
A ABCD E F G
A A Front
B Cleft D speaker (L)/
EE F G
A A B Front
CA D right
E E F speaker
G (R):
Place the front speakers to the sides of the monitor
A
or screen and as flush with the screen surface as
possible.
E
B C Center:
A AA D E F G
Place the Center above or below the monitor or
screen.
A A B C D Surround
E F G left speaker (L)/
A B C D E Surround
F G right speaker (R):
Place these speakers behind your listening position,
E
A facing slightly inwards.
B C D E F Subwoofer:
G
The position of the subwoofer is not so critical,
because low bass sounds are not highly directional.
But it is better to place the subwoofer near the
front speakers. Turn it slightly toward the center of
the room to reduce the wall reflections.
C D E F G Unit
Connecting 13
1. Connect the wires to the unit. Grey (R.R/L) Rear Rear right
Match each wire’s colored band (or marking)
Blue (R.R/L) Rear Rear left 2
to the same colored (or marked) connection
terminal on the rear of the unit. To connect the Green (C) Center Center
Connecting
cable to the unit, press each plastic finger pad
to open the connection terminal. Insert the wire Sub
Orange Any front position
and release the finger pad. woofer
Red (F.R/L) Front Front right
White (F.R/L) Front Front left
26).
Rear of the unit yy Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the player and then turn it
on again.
yy When the HDMI connection with HDCP
HDMI cable is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
TV
yy If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft.)).
Connecting
LG TV’s with SIMPLINK function has the logo as
shown above. -- You must use the HDMI cable (Type A, High
Speed HDMI™ cable with Ethernet).
,,Note (X)
Depending on the disc type or playing status, STANDARD HDMI CABLE WITH ETHERNET
some SIMPLINK operation may differ from your (X)
purpose or not work. HIGH SPEED HDMI CABLE
(O)
HIGH SPEED HDMI CABLE WITH ETHERNET
,,Note
To activate [SIMPLINK / ARC] function, set this
option to [On]. (page 30)
16 Connecting
then press ENTER (b) to move to the third level. does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
yy The 1080p video output frame rate may
be automatically set to either 24 Hz or
5. Use W/S to select the desired resolution then 50 Hz depending both on the capability
press ENTER (b) to confirm your selection. and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
Connecting 17
AUX connection
You can enjoy the sound from an external
component through the speakers of this system.
Connect the analog audio output jacks of your 2
component into the AUX L/R (INPUT) on this unit.
Connecting
And then select the [AUX] option by pressing
FUNCTION.
You can also use the F (Function) button on the
front panel to select the input mode.
Rear of the unit
Red
White
OPTICAL IN connection
You can enjoy the sound from your component
with a digital optical connection through the
speakers of this system.
Connect the optical output jack of your component
into the OPTICAL IN jack on the unit. And then
select the [OPTICAL] option by pressing FUNCTION.
Or press OPTICAL / TV SOUND to select directly.
You can also use the F (Function) button on the
2 front panel to select the input mode.
Connecting
To the digital
optical output jack
of your component
Connecting 19
Connecting to Your
Home Network Broadband
service
Connecting
Wired network connection
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not subject
to radio frequency interference.
DLNA certified servers
Please refer to the documentation for your network
device for further instructions.
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a
commercially available LAN or Ethernet cable.
,,Note
yy When plugging or unplugging the LAN
cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN Rear of the unit
cable but unplug while pressing down on
the lock.
yy Do not connect a modular phone cable to
the LAN port.
yy Since there are various connection
configurations, please follow the
specifications of your telecommunication
carrier or internet service provider.
yy If you want to access content from DLNA-
compatible digital media servers, this player
must be connected to the same local area
network with them via a router.
yy To set your PC as a DLNA-compatible digital
media server, install the SmartShare PC
Software on your PC. (page 36)
20 Connecting
2 Preparation
Connecting
2. Read the preparations for the network settings 2. Select [Next] and press ENTER (b) to apply
and then press ENTER (b) while [Start] is network settings.
highlighted.
Notes on network connection yy A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
yy Many network connection problems during
service. Depending on the access method of and
set up can often be fixed by re-setting the
subscriber agreement with your ISP, you may not
router or modem. After connecting the player
be able to use the internet connection feature
to the home network, quickly power off and/
contained in this player or you may be limited
or disconnect the power cable of the home
to the number of devices you can connect at
network router or cable modem. Then power on
the same time. (If your ISP limits subscription to
and/or connect the power cable again.
one device, this player may not be allowed to
yy Depending on the internet service provider (ISP), connect when a PC is already connected.)
the number of devices that can receive internet 2
service may be limited by the applicable terms
Connecting
of service. For details, contact your ISP.
yy Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
yy The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
yy Some internet content may require a higher
bandwidth connection.
yy Even if the player is properly connected and
configured, some internet content may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
yy Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
yy Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
yy A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your
internet service does not allow for such a
connection, you will not be able to connect the
player.
yy You must use a Router to use xDSL service.
22 System Setting
System Setting
3. Use W/S to select the first setup option, and
press D to move to the second level.
to the network and the internet have been This function allows you to control the playback
established. of media streamed from DLNA media server by a
DLNA certified smartphone. Most DLNA certified
BD-LIVE connection smartphone has a function to control the playback
You can restrict Internet access when BD-Live media on your home network. Set this option to
functions are used. [On] for allowing your smartphone to control this
unit. Refer to instructions of your DLNA certified
[Permitted] smartphone or the application for more detailed
information.
Internet access is permitted for all BD-Live
content.
,,Note
[Partially permitted] yy This unit and the DLNA Certified
Internet access is permitted only for BD-Live Smartphone must be connected to the
content which have content owner certificates. same network.
Internet access and AACS Online functions are yy To use the [Network Play] function using a
prohibited for all BD-Live content without a DLNA certified smartphone, press HOME
certificate. ( ) to display the home menu before
connecting to this unit.
[Prohibited]
yy While controlling the unit using the
Internet access is prohibited for all BD-Live [Network Play] function, the remote control
content. may not work.
yy Available file formats described on page
61 are not always supported on [Network
Play] function.
System Setting 25
System Setting
Select when a 16:9 wide TV is connected. The
Outputs 1080 lines of interlaced video.
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the [1080p]
left and right sides.
Outputs 1080 lines of progressive video.
[16:9 Full]
Select when a 16:9 wide TV is connected. The 1080p Display Mode
4:3 picture is adjusted horizontally (in a linear When the resolution is set to 1080p, select
proportion) to fill the entire screen. [24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
,,Note compatible with 1080p/24 Hz input.
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is ,,Note
set to higher than 720p. yy When you select [24 Hz], you may
experience some picture disturbance when
the video switches video and film material.
In this case, select [50 Hz].
yy Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of
the video output will be 50 Hz to match the
video source format.
26 System Setting
System Setting
decoder or digital decoder. Turns off this function.
[PCM]
Select if you connect this unit’s HDMI OUT jack
,,Note
The DRC setting can be changed only when a
to a device with digital decoder. disc is not inserted or the unit is in complete
[DTS Re-Encode] stop mode.
,,Note
yy When [Digital Output] option is set to
[Auto], the audio may output as bitstream.
If the bitstream information is not detected
from HDMI device with EDID, the audio may
output as PCM.
yy If the [Digital Output] option is set to [DTS
Re-Encode], the DTS Re-Encode audio is
outputted for BD-ROM discs with secondary
audio and the original audio is outputted for
the other discs (like [Auto]).
yy This setting is not available on the input
signal from an external device.
28 System Setting
Password
You can create or change the password.
[None]
3 Enter a 4-digit password twice, and press
[Speaker] ENTER (b) to create a new password.
System Setting
System Setting
yy When [Quick Start] is set to [On], power
All BD-ROM can be played. consumption will be higher than when
[Quick Start] is set to [Off ].
[0-254]
Prohibits play of BD-ROM with corresponding
ratings recorded on them. Auto Power Off
,,Note The screen saver appears when you leave the
player in Stop mode for about 5 minutes. If you
The [Blu-ray Disc Rating] will be applied
set this option to [On], the unit automatically
only for the Blu-ray disc that containing the
turns off within 15 minutes since the Screen Saver
Advanced Rating Control.
is displayed. Set this option to [Off ] to leave the
screen saver until the unit is operated by the user.
Sound Effect
You can select a suitable sound mode. Press SOUND
EFFECT repeatedly until the desired mode appears
on the front panel display or the TV screen. The
displayed items for the equalizer maybe different
depending on sound sources and effects.
[Standard]: You can enjoy optimized sound.
[Music]: You can enjoy comfortable and natural
sound.
[Cinema]: You can enjoy more immersive and
cinematic surround sound.
[Flat]: Provides balanced sound.
[Boost]: Boosts the mid-range for sound 3
reinforcement.
System Setting
[Treble / Bass]: Reinforces the treble and bass.
[Football]: You can enjoy a feeling of presence in
the stadium when watching the football match
broadcast.
[Bass Blast]: Reinforce the bass sound effect from
front left and right speaker and subwoofer.
[Power Front] : You can enjoy the harmonious
sound. This mode is suited for all the speakers were
placed in a row.
Operating
yy Depending on the BD-ROM titles, an USB on the [Settings] menu to [On] (page 26).
device connection may be needed for the 2. Press B (OPEN/CLOSE), and place a disc on the
proper playback. disc tray.
yy Unfinalized DVD-VR format discs may not 3. Press B (OPEN/CLOSE) to close the disc tray.
be played in this player.
The playback starts automatically.
yy Some DVD-VR discs are made with CPRM 4. Refer to the owner’s manual of your 3D-ready
data by DVD RECORDER. This unit cannot
TV for the further instruction.
support these kinds of discs.
You may need to adjust the display settings and
focus on your TV’s setting for the improved 3D
effect.
>>Caution
yy Watching a 3D content for a long period
time may cause dizziness or tiredness.
yy It is not recommended to watch a video
in 3D mode for infirm, child and pregnant
woman.
yy If you are experiencing headache, tiredness
or dizziness while viewing content in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
34 Operating
menu for the file type selection will appear. yy Regular back up is recommended to prevent
File loading may takes few minutes depending on data loss.
the number of content stored in the USB storage yy If you use an USB extension cable, USB HUB or
device. Press ENTER (b) while [Cancel] is selected USB Multi-reader, the USB device may not be
to stop loading. recognized.
2. Press HOME ( ). yy Some USB device may not work with this unit.
3. Select [Movie], [Photo] or [Music] using A/D, yy Some digital cameras and mobile phones are
and press S. not supported.
4. Select Disc or USB and press ENTER (b). yy USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
Operating
2. Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D,
and press S.
4. Select [MTP] using A/D and press ENTER (b).
Downloading SmartShare PC
Software
,,Note
If the SmartShare PC Software disc is supplied,
4 4. Select DLNA media server in the category using you can install SmartShare PC Software on
A/D and press ENTER (b). your PC by the disc.
Operating
Operating
center, and then click [Settings] on the top resolution of 1024 x 768 pixels, and 16 bit color
right corner of the SmartShare PC software. The settings
[Settings] menu appears on the screen. yy Free Disk Space : 200 MB
3. Click [My Shared Contents] tab, and then click yy Windows® XP (Service Pack 2 or higher),
icon. The [Add/Remove Shared Folders] Windows Vista®, Windows® 7 or higher
menu appears on the screen.
yy Windows® Media Player® 11.0 or higher
4. Click the folder containing the files you want
to share and then click the [OK]. The checked yy Network environment: 100 Mb Ethernet
folder is added to the [My Shared Contents]
and then click the [OK] at the bottom of the
[Settings] menu.
5. Make sure that the SmartShare service turns on
at the [Service] tab.
,,Note
yy If the shared folders or files are not displayed
on the player, click the [My Shared Contents]
on the [Settings] menu, and then click
icon.
yy For more information, click [HELP] on the
[Settings] menu.
38 Operating
Operating
40 Operating
4
Operating
Operating
c [Music Select] – Select the background music
for the slide show (page 46).
Operating
2. Select an [Option] using A/D, and press
ENTER (b).
Hearing a different audio 3. Use W/S to select the [TV Aspect Ratio]
option.
eroy
4. Use A/D to select desired option.
1. During playback, press INFO/MENU (m).
5. Press BACK (1) to exit the On-Screen display.
2. Select an [Option] using A/D, and press
ENTER (b). ,,Note
3. Use W/S to select the [Audio] option. Even if you change the value of the [TV Aspect
4. Use A/D to select desired audio language, Ratio] option in On-Screen display, the [TV
audio track or audio channel. Aspect Ratio] option in the [Settings] menu is
not changed.
5. Press BACK (1) to exit the On-Screen display.
,,Note
yy Some discs allow you to change audio
selections only via the disc menu. In this
case, press TITLE/POPUP or DISC MENU
button and choose the appropriate audio
from the selections on the disc menu.
yy Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
yy On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
44 Operating
,,Note
The information displayed on the screen
may not correct comparing actual content
information.
Operating
Press red (R) colored button repeatedly.
yy If you press Z (STOP) during playback, the
subtitle selection is cancelled.
yy This function is not available for playing a
file on a server via home network.
46 Operating
,,Note
When selecting an audio file from a server,
folder selection is not available. Only file
selection is available.
Operating
not be operated if [BD-LIVE connection] option private sound mode is unavailable.
is set to [Partially Permitted]. yy Not all modes, support sound privacy and
4. Insert a BD-ROM with BD-Live. pairing multiple devices is not available.
The operations may differ depending on the
disc. Refer to the manual supplied with the disc.
>>Caution
Do not extract the connected USB device
while content is being downloaded or a Blu-
ray disc is still in the disc tray. Doing so may
damage the connected USB device and BD-
Live features may not operate properly with
the damaged USB device anymore. If the
connected USB device seems damaged from
such an action, you can format the connected
USB device from the PC and reuse it with this
player.
,,Note
yy Some BD-Live content may be restrictively
accessed in some territories by content
provider’s own decision.
yy It may take up to several minutes to load
and start enjoying BD-Live content.
yy For BD-Live, use the USB flash drive /
external HDD formatted in FAT32 only.
48 Operating
Operating
1. Press FUNCTION until the TUNER (FM) appears
in the display window.
station
The FM tuner is supplied with the RDS (Radio Data
2. Select the desired frequency by using TUNING
System) facility. This shows information about the
(-/+).
radio station being listened to. Press RDS repeatedly
3. Press ENTER (b) a preset number will flash in to cycle through the various data types:
the display window.
4. Press PRESET (-/+) to select the preset number (Programme Service Name)
you want. PS The name of the channel will appear in
5. Press ENTER (b). The station is stored. the display
6. Repeat the steps 2 to 5 to store other stations. (Programme Type Recognition)
PTY The programme type (e.g. Jazz or News)
will appear in the display.
(Radio Text)
A text message contains special
RT
information from the broadcast station.
This text may scroll across the display.
(Time controlled by the channel)
CT This shows the time and date as
broadcast by the station.
50 Operating
In order to use Bluetooth wireless technology, lights up and “PAIRED” appears in the display
devices must be able to interpret certain profiles. window.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile) ,,Note
yy Depending on the Bluetooth device type,
some device have a different pairing way.
yy XX:XX means the last four digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see “LG HTS
(F7:08)” on your Bluetooth device.
4. Listen to music.
To play a music stored on your Bluetooth
device, refer to your Bluetooth device’s user
guide.
,,Note
If you change the function of the unit, the
Bluetooth function is disconnected, operate
pairing again.
Operating 51
,,Note
yy When using Bluetooth technology, you
have to make a connection between the
unit and the Bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :
-- There is a obstacle between the unit and
the Bluetooth device.
-- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
yy You should connect your Bluetooth device
to this unit again when you restart it.
yy When you select Bluetooth function
again after changing to other functions,
Bluetooth connection may be
disconnected. You should reconnect the
Bluetooth device to use this function.
4
yy The sound may be interrupted when
the connection interfered by the other
Operating
electronic wave.
yy You cannot control the Bluetooth device
with this unit.
yy Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yy Depending on the type of the device, you
may not be able to use the Bluetooth
function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc..
yy The more distance between the unit and
the Bluetooth device, the lower the sound
quality becomes.
yy Bluetooth connection will be disconnected
when the unit is turned off or the
Bluetooth device gets far from the unit.
yy When Bluetooth connection is
disconnected, connect the Bluetooth
device to the unit again.
yy When not connected the Bluetooth, “BT
READY” appears on the display window.
52 Operating
,,Note 4
yy For detailed information of each service,
contact to the content provider or visit
Operating
support link of the service.
yy The content of Premium services and
service related information, including user
interface, is subject to changes. Please refer
to the web site of each service for most up-
to-date information.
yy For the first time to access [Premium],
current country setting appears.
yy If you want to change the country setting,
go to [Settings] > [NETWORK] > [Smart
Service Setting] > [Country Setting]. Select
[Manual] and press ENTER (b) on [Country
Setting] menu.
yy When changing the sound effect, the audio
output may be delayed depending on your
internet environment.
54 Operating
Troubleshooting
General
Troubleshooting
not be recognized.
yy An USB device which requires additional program installation when
you have connected it to a computer is not supported.
yy This unit supports only USB Flash Drive and USB External HDD with
FAT32 or NTFS format.
The angle cannot be changed. yy Multi-angles are not recorded on the DVD Video being played.
Cannot play video, photo or yy The files are not recorded in a format that the unit can play.
audio files. yy The unit does not support the codec of the video file.
The remote control does not yy The remote control is not pointed at the remote sensor of the unit.
work properly. yy The remote control is too far from the unit.
yy There is an obstacle in the path of the remote control and the unit.
yy The batteries in the remote control are exhausted.
The unit is plugged in, but the You can reset the unit as follows.
power will not turn on or off. yy Unplug the power cord, wait at least five seconds, and then plug it in
The unit is not operating again.
normally.
56 Troubleshooting
Network
5
Troubleshooting
Troubleshooting 57
Picture
Blu-ray 3D disc playback does yy Connect the player to your TV with HDMI cable (Type A, High Speed
not output 3D views. HDMI™ Cable).
yy Your TV may not support “HDMI 3D mandatory format”.
yy The [3D Mode] option in the [Settings] menu is set to [Off ].
Set the option to [On].
Sound 5
Troubleshooting
Symptom Cause & Solution
There is no sound or the sound yy The unit is in scan, slow motion, or pause mode.
is distorted. yy The sound volume is low.
yy Check the speaker cable connection. (page 13)
Customer Support
You can update the Player using the latest software to enhance the products operation and/or add new
features. To obtain the latest software for this player (if updates have been made), please visit
http://www.lg.com or contact LG Electronics customer care center.
6 ,,Note
Depending on the unit being connected, you
may not be able to control your TV using some
Appendix
of the buttons.
Appendix 59
[Cancel]
Exits the update menu and the 6
home menu appears.
Appendix
Option 2:
If the software update is available from the update The player will check for the newest update.
server, the “Update” icon appears in the Home
menu. Press blue (B) colored button to start the ,,Note
update procedure. yy Pressing ENTER (b) while checking for the
update will end the process.
yy If there is no update available, the Message,
“No update is found.” appears. Press ENTER
(b) to return to the [Home Menu].
60 Appendix
>>Caution
Do not turn off the power during the software
update.
,,Note
If the software includes the driver update, disc
tray may open during the process.
,,Note
The Software Update function may not
work properly depending on your internet
environment. In this case, you can obtain the
6 latest software from the authorized LG Electronics
Service Center then update your player. Refer to
Appendix
Additional Information
File requirement
Video files
Audio files
Appendix
USB (DRM free), “.flac”, 48 kHz (MP3) kbps (MP3) supported on this
“.ogg”, “.aiff” player.
“mp3”, “.wma”, within 32 - 48 kHz within 32 - 192 kbps Some wav, FLAC
“.wav”, “.m4a” (WMA), within 16 - (WMA), within 32 - 320 and AIFF files are not
DLNA
(DRM free), “.flac”, 48 kHz (MP3) kbps (MP3) supported on this
“.ogg” player.
Photo files
,,Note ,,Note
yy The file name is limited to 180 characters. yy A “avi” file which is encoded “WMV 9 codec”
is not supported.
yy Maximum files/Folder: Less than 2000 (total
number of files and folders) yy This player supports UTF-8 files even it
contains Unicode subtitle content. This
yy Depending on the size and number of the
files, it may take several minutes to read the player can not support the pure Unicode
content on the media. subtitle files.
yy File compatibility may differ depending on yy Depending on the types of file or ways of
the server. recording, it may not play back.
yy Because the compatibility on DLNA server yy A disc which was recorded by multi-session
are tested on the SmartShare environment, on normal PC is not supported on this
file requirements and playback functions player.
may differ depending on media servers. yy To be playback a video file, video file name
and Subtitle file name must be the same.
yy The file requirements on page 61 are
not always compatible. There may have yy When you play a video file with a extension
some restrictions by file features and media such as “.ts”, “.m2ts”, “.mts”, “.tp”, “.Trp” or “.m2t”,
server’s ability. your player may not support subtitle files.
yy Playing video subtitle files are only available yy The total playback time of audio file
on a media server created by SmartShare PC indicated on the screen may not correct for
software downloaded from website. VBR files.
yy The files from removable media such as USB yy Video / Audio codec compatibility may
drive, DVD-drive etc. on your media server differ depending on video file.
may not be shared properly.
yy The total playback time of audio file
indicated on the screen may not correct for
VBR files. AVCHD (Advanced Video
yy HD video files contained on the CD/DVD or Codec High Definition)
USB 1.0/1.1 may not played properly. yy This player can playback AVCHD format discs.
Blu-ray Disc or USB 2.0 are recommended to These discs are normally recorded and used in
play back HD video files.
6 camcorders.
yy This player supports H.264/MPEG-4 AVC yy The AVCHD format is a high definition digital
Appendix
profile Main, High at Level 4.1. A file with video camera format.
higher level may not be supported.
yy The MPEG-4 AVC/H.264 format is capable of
yy This player does not support files that are compressing images at higher efficiency than
recorded with GMC*1 or Qpel*2. that of the conventional image compressing
*1 GMC – Global Motion Compensation format.
*2 Qpel – Quarter pixel yy This player can playback AVCHD discs using
“x.v.Color” format.
yy Some AVCHD format discs may not play
depending on the recording condition.
yy AVCHD format discs need to be finalized.
yy “x.v.Color” offers a wider color range than normal
DVD camcorder discs.
Appendix 63
Appendix
64 Appendix
*1 The secondary and interactive audio may not yy The audio is outputted up to PCM 48 kHz/16 bit
be included in the output bitstream if [Digital for MP3/WMA file and PCM 44.1kHz/16 bit for
Output] option is set to [Auto]. (Except LPCM Audio CD while playback.
Codec : the output always include interactive yy With digital audio connection (HDMI OUT),
and secondary audio.) Disc Menu button sounds of BD-ROM may not
*2 This player automatically selects the HDMI be heard if the [Digital Output] option is set to
audio according to the decoding capability [Auto].
of the connected HDMI device even though yy If the audio format of the digital output does
[Digital Output] option is set to [Auto]. not match the capabilities of your receiver, the
*3 If the [Digital Output] option is set to [DTS re- receiver will produce a strong, distorted sound
encode], the audio output is limited to 48 kHz or no sound at all.
and 5.1Ch. If the [Digital Output] option is set yy Multi-channel Digital Surround Sound via
to [DTS re-encode], the DTS Re-encode audio digital connection can only be obtained if your
6 is outputted for BD-ROM discs, and the original receiver is equipped with a Digital Multi-channel
audio is outputted for the other discs (like decoder.
Appendix
[Auto]).
yy This setting is not available on the input signal
from an external device.
Appendix 65
Appendix
66 Appendix
Trademarks and
Licenses
For DTS patents, see http://patents.dts.com.
All other trademarks are trademarks of their Manufactured under license from DTS Licensing
respective owners. Limited. DTS, DTS-HD, the Symbol, & DTS and the
Symbol together are registered trademarks, and
DTS-HD Master Audio | Essential is a trademark of
DTS, Inc. © DTS, Inc. All Rights Reserved.
Appendix
Multimedia Interface, and the HDMI logo are their respective owners.
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
“x.v.Color” is a trademark of Sony Corporation.
Cinavia Notice
This product uses Cinavia technology to limit the
use of unauthorized copies of some commercially-
produced film and videos and their soundtracks.
When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback
or copying will be interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com. To
request additional information about Cinavia by
mail, send a postcard with your mailing address
to: Cinavia Consumer Information Center, P.O. Box
86851, San Diego, CA, 92138, USA.
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2013
Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
6
Appendix
Appendix 69
Specifications
General
Power requirements Refer to main label.
Refer to main label.
Power consumption
Networked standby : 1.5 W (If all network ports are activated.)
Dimensions (W x H x D) Approx. 360 mm x 60.5 mm x 299 mm
Operating temperature 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity 5 % to 90 %
Inputs/Outputs
HDMI OUT (video/audio) 19 pin (Type A, HDMI™ Connector) x 1
ANALOG AUDIO IN 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
DIGITAL IN (OPTICAL) 3 V (p-p), Optical jack x 1
Tuner
FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Amplifier
Power output (3 Ω), (RMS), THD 10 %
Total 1000 W RMS
Front 167 W RMS x 2
Center 167 W RMS 6
Rear 167 W RMS x 2
Appendix
Sub-Woofer 167 W RMS (Passive)
70 Appendix
System
Laser Semiconductor laser
Wavelength 405 nm / 650 nm
Signal system Standard NTSC/PAL color TV system
Frequency response 20 Hz to 18 kHz (48 kHz, 96 kHz, 192 kHz sampling)
Harmonic distortion Less than 0.05 %
Dynamic range More than 80 dB
LAN port Ethernet jack x 1, 10BASE-T / 100BASE-TX
Bus Power Supply (USB) 5 V 0 500 mA
Speakers
Front
Type 1 Way 1 speaker Max. Input power 334 W RMS
Net Dimensions
Impedance 3Ω 250 mm x 1150 mm x 250 mm
(W x H x D)
Rated Input Power 167 W RMS
Rear
Type 1 Way 1 speaker Max. Input power 334 W RMS
Net Dimensions
Impedance 3Ω 97 mm x 140 mm x 80 mm
(W x H x D)
Rated Input Power 167 W RMS
Center
Type 1 Way 1 speaker Max. Input power 334 W RMS
Net Dimensions
Impedance 3Ω 260 mm x 92 mm x 73 mm
(W x H x D)
6
Rated Input Power 167 W RMS
Appendix
Subwoofer
Type 1 Way 1 speaker Max. Input power 334 W RMS
Net Dimensions
Impedance 3Ω 133 mm x 352 mm x 325 mm
(W x H x D)
Rated Input Power 167 W RMS
Appendix
service center.
72 Appendix
Important Information
relating to Network
Services
All information, data, documents, communications,
downloads, files, text, images, photographs,
graphics, videos, webcasts, publications, tools,
resources, software, code, programs, applets,
widgets, applications, products and other content
(“Content”) and all services and offerings (“Services”)
provided or made available by or through any
third party (each a “Service Provider”) is the sole
responsibility of the Service Provider from whom it
originated.
The availability of and access to Content and
Services furnished by the Service Provider through
the LGE Device are subject to change at any time,
without prior notice, including, but not limited to
the suspension, removal or cessation of all or any
part of the Content or Services.
Should you have any inquiry or problem related
to the Content or Services, you may refer to the
Service Provider’s website for the most up-to-
date information. LGE is neither responsible nor
liable for customer service related to the Content
and Services. Any question or request for service
relating to the Content or Services should be made
directly to the respective Content and Service
Providers.
6 Please note that LGE is not responsible for any
Content or Services provided by the Service
Appendix