Professional Documents
Culture Documents
Note :-
Drawing is based on the received drawings
and input from client, equipment/chamber
A 12
location may be vary as per actual site A
3.26 condition.
BOOTH
200W
13
10
9
AVC CE
EN P
TRAFFIC DIRECTION
S
E O
LOOP PR LO
17 11
7 1
3
BOOTH
B 200W
B
6
2
5
E
AVC E NC 16
15 LOOP ES OP
PR LO
8 TRAFFIC DIRECTION
LANE EQUIPMENT DETAILS
LANE
CLOSED TRAFFIC CONE
C C
NOTES:- 2
FOUNDATION
BARRIER GATE
FOUNDATION
500x500x500 6PD0002
CONDUIT Ø 63 MM
HEIGHT SENSOR
POLE FOUNDATION
2. For all sensors, loops, further road cutting / digging & foundation work are in client scope and 4
TRAFFIC LIGHT, UFD &
V.LIGHT POLE 300x300x300 6PD0003
PRESENCE LOOP
1. Barrier Gate & all other pole foundations shall be 25mm above median surface. 9 AVC LOOP (Normal Lane) 2500x1000 -----------------
200W (FOCUS ON PRESENCE
LOOP)
RFID READER (TO BE
2. Proper earthing to be provided in each booth/tunnel for barrier gates, same is in client scope . PRESENCE LOOP (Normal
MOUNTED ON CANOPY)
10 2500x1000 -----------------
3. Loop groove shall be of 60mm depth. Lane) TRAFFIC CONE
SHALL BE ON CLIENT
SCOPE
11 BOOTH 3500x1900 -----------------
E 1. It is proposed that no iron Re-bar or dowels should be used below AVC Sensor Area. 13 LIGHT 200 WATT ----------------------- ----------------------
E
2. Distance from Pay axis is measurement base point for all equipments.
14 RFID READER
3. Dimensions are in Metre (unless otherwise specified).
4. Please follow written dimensions only. 15 AVC LOOP (Extrawide Lane) 3000x1000 -----------------
5. Earthing Required less then 2 ohm for all equipments including ( Barrier gate,Traffic 16
PRESENCE LOOP
(Extrawide Lane) 3000x1000 -----------------
1 2 3 4 5 6