Professional Documents
Culture Documents
Pending Details
Pending Details
3. Material submittal for GI Duct which are coming in the external area make: AGIS Equiv
4. Fire rated duct- For any technical submission please provide the technical details like thickness grade, gauge, COO,
Material specification etc. Installation procedures can be submitted in the MS section
5. GEE Coat- There are two submission for anti fungal coating GEE coat and Foster. Please clarify which will be used
6. Duct liner- Please proceed with Gulf o Flex Aero flex or equivalent make
7. Foster vapor safe coating AF-Please clarify which vapor barrier will be used as per my previous comment above
8. Please clarify where is the rubber insulation tubes used for package units
9. For external GI Duct please use closed cell elastomeric insulation of make Gulo flex/ Aero flex or equivalent
10. Please submit the technical data sheet of Jet diffuser & RA louvers / Grills, Volume control dampers, Fire
dampers, Access door, Flexible duct connectors any reputed make, Flexible ducts ( if we are using the same) any
reputed make, Preferred make for Air outlets, Dampers and Access door: Air master/ Tecnalco or equiv
11. Highlight the selection of the diffuser selection and show the distance covered against the design air flow.
12. Kingspan PAL Duct shall be UL certified and Fire resistant type as we are going the use the same in the workshop.