Professional Documents
Culture Documents
Only straight pull is required to operate the Bowen Type Z Oil Jar, and successive blows can be
struck as often as the operator can slack off and raise the running string.
The Bowen Oil Jar should be tested in the Bowen Jar Tester prior to operation. O-Ring
Nonextrusion Ring
RECOMMENDED SPARE PARTS:
(1) 1 Service Kit
Back-Up Ring
(2) 1 Washpipe O-Ring
(3) 2 Piston Assemblies Middle Body
(4) 16 Non-Extrusion Rings
(5) 16 Seal Protector Rings Knocker
(6) 4 Mandrel Body Fill Plugs Oil Ring
(7) 4 Middle Body Fill Plugs Seal Protector Ring
(8) 8 Packing Sets Nonextrusion Ring
Piston Rings
(9) 1 Mandrel Body Setting Tool
Piston
(10) 1 Piston Setting Tool Fill Plug
(11) 4 Mandrel Body Seal Sets Oil Ring
Seal Protector Ring
Send for Bowen Technical Manual No. 4065 which includes complete descriptions construction, operation, maintenance, and Nonextrusion Ring
parts listing for Bowen Type Z Oil Jars. Oil Ring
Washpipe
Washpipe Body
Size Connections (inches) 2d EUE 32 API F.H. 32 API I.F. 42 API F.H. 42 API I.F. 52 API Reg. 6s API Reg. 7s API Reg.
Outside Diameter (inches) 42 4w 4w 6 64 6w 7w 9
Inside Diameter (inches) 2a 12 2 2 24 2a 3z 3w
Free Stroke (inches) 5x 4v 5z 4c 62 62 62 62
Type Jar Int. Mand. Int. Mand. Int. Mand. Int. Mand. Int. Mand. Int. Mand. Int. Mand. Int. Mand.
Complete Assembly Part No. 52653 52530 52500 52498 52544 52680 52711 66346
Weight 202 325 285 590 640 757 900 1725
Mandrel Body Setting Tool Part No. - 22709-40 22709-41 448 22709-48 22709-51 22709-59 22709-65
Piston Setting Tool Part No. - 22709-36.5 22709-38 22709-41.75 54309 22709-45 22709-53 22709-57
Service Kit Part No. 55403 Only one Service Kit is required for all sizes of tools. Kit does not include any Seal Setting Tools.
Weight 75 lbs Seal Setting Tools must be ordered separately as required for each tool.
27