Professional Documents
Culture Documents
Gauss
5053A/D/K/Y_5153A/K
Note: this manual can be modified without prior notice on the characteristics of described
equipment. Please download from Support website for the latest versions.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 1/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
V1.2 2019-03-21 time/talking time (Chapter 1.1) and Xiaolong Yang Joanna Wei Eason Wang
V1.0 2019-01-22 Preliminary Draft Xiaolong Yang Joanna Wei Eason Wang
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 2/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Content
1. General Information about the product .................................................................................. 4
1.1. Product Specifications.................................................................................................................... 4
1.2. Product Label ................................................................................................................................. 8
1.2.1. Commercial Label ............................................................................................................... 8
1.2.2. CU label............................................................................................................................. 12
1.2.3. IMEI label print instruction ................................................................................................. 15
1.3. Accessories .................................................................................................................................. 16
1.3.1. Battery ............................................................................................................................... 16
1.3.2. Charger ............................................................................................................................. 18
1.3.3. USB cable ......................................................................................................................... 19
1.3.4. Headset ............................................................................................................................. 20
2. Basic inspection .......................................................................................................................... 21
2.1. Maintenance preparation ............................................................................................................. 21
2.1.1. General policy ................................................................................................................... 21
2.1.2. Engineer functionalities ..................................................................................................... 21
2.1.3. Preparation ........................................................................................................................ 21
2.2. Repair process ............................................................................................................................. 22
2.2.1. Level 1 repair process ....................................................................................................... 22
2.2.2. Level 2 repair process ....................................................................................................... 22
2.3. Warranty check ............................................................................................................................ 23
2.3.1. IMEI Check ........................................................................................................................ 23
2.3.2. Humidity sensitive label..................................................................................................... 24
2.3.3. Proof of purchase .............................................................................................................. 25
2.3.4. Visual Mechanical inspection ............................................................................................ 26
2.3.5. Accessories warranty check ............................................................................................. 27
2.4. Product test .................................................................................................................................. 27
2.4.1. Recovery mode ................................................................................................................. 27
2.4.2. Function test (SDT test & MMI test) .................................................................................. 30
2.4.3. RF test instruction ............................................................................................................. 34
3. Software download ..................................................................................................................... 34
4. Separated Dual Camera repair process of Gauss .............................................................. 37
5. Disassembly and reassembly Gauss .................................................................................... 40
5.1. Preparation ................................................................................................................................... 40
5.1.1. ESD Safety ........................................................................................................................ 40
5.1.2. Disassembly tool ............................................................................................................... 42
5.2. Disassembly process ................................................................................................................... 44
5.3. Reassembly process .................................................................................................................... 57
6. L2 trouble shooting .................................................................................................................... 70
7. PCBA exchange ........................................................................................................................... 70
8. Functional test ............................................................................................................................. 71
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 3/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
1.1.Product Specifications
BT/WLAN/MP3, social network service etc. functions. It can work with the 2G/3G/4G networks.
Detail features
EMEA/APAC: 1/2/5/8
3G Network
LATAM: 1/2/4/5/8
EU&MEA: 1/3/7/8/20/28 full
4G Network LATAM: B1/2/3/4/5/7/8/12/13/17/28full/B66
General APAC: LTE: B1/3/5/7/8/20/28/38/40
Android O for 5053D/K/Y
OS
Android P for 5053A_5153A/K
Chipset SDM439
CPU Frequency 8 core,4x A53 at 2.0GHz + 4x A53 at 1.45GHz
GPU Adreno505 GPU 560MHz
Dimensions (mm) 151.1x69.7x7.99
Estimated Weight (g) 145(Target)
Form Factor Bar
Design
Side Keys volume & power key
Removable battery cover No
Color Variants Blue-purple gradient ,Black-blue gradient
Main LCD Size (inch) 5.94inch HD+ U notch
Main display resolution HD+ ; 720X1560; 19.5:9
PPI 289
Main LCD Type LTPS(FFS)
Display Brightness (nits) - in [Minimum]
Min >=400, Typ>=450 (handset)
[Max]
NTSC Typ. 70%
View angle (Degree) L/R/U/D: θ min =80
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 4/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
2G Data GPRS/EDGE
3G Data HSPA+ (42M bit/s DL, 5.76Mbit/s UL)
4G Data Cat 4 (150Mbit/s DL, 50Mbit/s UL)
Data
SIM Slot 1 Network 2G/3G/4G
SIM Slot 2 Network 2G/3G (No for 5053A/5153A)
Carrier Aggregation No
Number of pixels 13M+5M depth camera
Focus AF
Image Sensor Samsung 3L6(13M) +GC5025(5M ) ;
Sensor Size 1/3(13M) + 1/5(5M)
Sensor Pixel size 1.12μm + 1.12μm
Lens Apeture size F2.0(13M) + F2.4(5M)
Lens (Wide angle/ FOV) 78.2°(13M)84°(5M)
Close loop No
Rear Camera
Focus Speed 0.3s
Number of Elements 5P+3P
Camera Flash Single tone
Flash type Flash light
EIS No
Video Playback: 1080p@30fps
Video
Video Capture: 1080p@30fps
HDR Yes
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 6/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 7/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 8/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
5053D-2AALEU2
IMEI Sample
V03
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 9/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
5053K-2AALEU1
IMEI Sample
V03
5053K-2AALEU2
IMEI Sample
V03
5053Y-2AALEU1
IMEI Sample
V03
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 10/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
5053Y-2AALEU2
IMEI Sample
V03
5053A-2AALMX1
IMEI Sample V04
5153K-2AALMX1
IMEI Sample V01
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 11/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
5153A-2AALMX1
IMEI Sample V01
1.2.2. CU label
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 12/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
5053D-2AALEU2
CU Sample V01
38_73mm
5053K-2AALEU1
CU Sample V01
38_73mm
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 13/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
5053K-2AALEU2
CU Sample V01
38_73mm
5053Y-2AALEU1
CU Sample V01
38_73mm
5053Y-2AALEU2
CU Sample V01
38_73mm
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 14/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
5053A-2AALMX1
CU Sample V04
38_73mm
5153K-2AALMX1
CU Sample V01
38_73mm
5153A-2AALMX1
CU Sample V01
38_73mm
Please refer to < IMEI label print by Zebradesign 0.2> in support website (CSS/RSH) for details.
http://rsh.a-novo.com/modules/sections/index.php?op=viewarticle&artid=2540
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 15/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
1.3. Accessories
1.3.1. Battery
1) Battery Picture
2) Battery feature
3400mAh(Minimum);
Softpack Battery TLp034F1 Lithium
3500mAh (Typical)
3) Battery life
The bellowing table shows the nominal battery life respectively in standby and talking mode. These
typical values are expressed in normal temperature with battery initially full charged and under good
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 16/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
ratio coverage. Battery range depends on the network characteristics, the ambient temperature and
particularly on movement.
For a normally discharged battery which has not been stored for long time, the charge time
Note:
➢ If the battery is new, charge it before use. Battery icon will appear after charging a short
time.
➢ If the battery is deeply discharged, battery icon will appear after charging several minutes
http://rsh.a-novo.com/modules/sections/index.php?op=viewarticle&artid=2993
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 17/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
1.3.2. Charger
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 18/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
PN: CDA0000024C2
PN: CDA0000024C8
PN: CDA3122005C1
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 19/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
1.3.4. Headset
PN: CCB0046A10C1
PN: CCB0046A10C4
PN: CCB0049A12C4
Note: For charger, USB cable and headset, the PN depends on the CU reference. Please check with
RSH website or SCS system according to specific CU.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 20/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
2. Basic inspection
This chapter describes the maintenance of Gauss. The following operations can only be performed by
➢ For handset
1) Warranty check
2) Functional test
➢ For standard accessories (Charger, Headset etc.)
1) Warranty check
2) Functional check
2.1.3. Preparation
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Please refer to <L1 repair process flow chart> and in support (CSS/RSH) website for details.
http://rsh.a-novo.com/modules/sections/index.php?op=viewarticle&artid=2992
Please refer to <L2 repair process flow chart> and in support (CSS/RSH) website for details.
http://rsh.a-novo.com/modules/sections/index.php?op=viewarticle&artid=2992
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 22/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
3) Open dial pad -> Type *#2886# -> “MANU” -> “TRACEABILITY”.
4) IMEI is engraved on SIM tray (For Dual SIM version, only engrave IMEI1)
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 23/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
If IMEI numbers checked by any 2 of above 4 ways are not the same, it means the device is out of
warranty policy.
If humidity sensitive label is not good, the cell phone will be considered as out of guarantee.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 24/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
a) Using the date code on commercial product label and match it with the date code matrix
hereafter.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 25/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Coding day
Coding month
Coding year
Note:
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 A
11 12 13 14 15 16 17 18 19 20
B C D E F G H I J K
Day
21 22 23 24 25 26 27 28 29 30
L M N O P Q R S T U
31
V
Jan Feb Mar Apr May Jun Jul Aug Sep Oct
E F G H I J K L M N
Month
Nov Dec
O P
10 11 12 13 14 15 16 17 18 19
T U V W X Y Z A B C
Year
20 21 22 23 24 25 26 27 28 29
D E F G H I J K L M
b) If the phone can’t power on, please read data code by using Sugar tool. Please refer to SW
download process in chapter 3 for details.
Please refer to <Visual mechanical check flow chart> in support website (CSS/RSH) for details.
http://rsh.a-novo.com/modules/sections/index.php?op=viewarticle&artid=2992
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 26/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Please refer to < Accessories inspection > in support website (CSS/RSH) for details.
http://rsh.a-novo.com/modules/sections/index.php?op=viewarticle&artid=2992
How to use: Long press “Volume up” Key + “Power” Key at the same time until the LCD lights on in
power off mode to enter recovery mode.
When to use: When you cannot start your handset/tablet or when there will be something wrong
during switch on or when cannot charge or cannot charge normally.
Consumer personal data format: it will format consumer data, and the memory and settings of your
product will return as released from factory.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 27/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Click-through steps:
1. Long press “Volume up” Key + “Power” Key at the same time until the LCD lights on in power off
mode to enter recovery mode.
2. Press Volume key to select “Wipe data / factory reset” then press Power key to confirm factory reset;
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 28/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
3. Press Volume key to select “Yes” and then press Power key to confirm the deletion of all user data;
4. Factory reset complete, press Volume key to select “Reboot system now” then press Power key to
confirm.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 29/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
3) If the product displays “input NCK code”, this means the software is Network locked or SIM locked,
and can only be used with dedicated SIM card hence use the relevant SIM card or enter the phone
code if available.
a. Using Smart Diagnosis Tool to proceed with the test, for detail instruction of test with
Smart Diagnosis Tool, please refer to < Smart Diagnosis Manual > in support (CSS/RSH)
website.
http://rsh.a-novo.com/modules/sections/index.php?op=viewarticle&artid=2375
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 30/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Please always use the latest version of the software downloading tool in order to take advantage
of the latest improvements. This SmartDiagnosis tool can be downloaded from support website
(CSS/RSH)
Below are the testing items that are not involved in the SDT test, please do an extra
CheckTunning
FM
USB OTG
a) Insert USB OTG cable to test, then it will detect and show “OK” if it functions well;
E-Compass
a) Please move the phone is an 8 shape according to the instruction and press “OK”;
b) The compass will always point north whatever the phone is put at which direction if it
functions well;
PSensor Rawdata
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 31/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
GPS
Fingerprint
a) It will run the test automatically, and then press the fingerprint module (on the battery cover)
according to instructions;
Calling
Battery Level
EfuseCheck
a) It will check the Efuse function, it will show “Enable” if it functions well;
Attestation key
Factory Reset
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 32/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
MemoryLifeTime
DuALCAM VERIFY
Please refer to Chapter4 <Dual Camera repair process> for specific operation steps.
Note:
a) If there is no camera failure and the handset wasn’t disassembled, please do not perform the
DUALCAM VERIFY.
c) If there is camera failure, please follow chapter 4 <Dual Camera repair process> to do camera
Type *#2886# in dial pad to enter MMI test mode, you will then see the interface displaying the
SW version. Select “Auto” to start the auto test, or select “MANU” to do the MMI test manually.
If one of the tests fails during “Auto” test mode, it will display “Failed: xxx”. In this case, either
press ‘Next’ to go on test or press ‘RETEST’ to retest this item or press ‘END’ to Power off.”
For detailed instruction of each test item, please refer to <MMI TEST> video in support
(CSS/RSH) website.
http://rsh.a-novo.com/modules/sections/index.php?op=viewarticle&artid=2377
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 33/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Please refer to < RF test in RC use guide > in support website (CSS/RSH) for details.
http://rsh.a-novo.com/modules/sections/index.php?op=viewarticle&artid=2992
3. Software download
USB port
3. SW download tool
Please use the dedicated software downloading tool (DL Tool) for this product. The version of this
Please always use the latest version of the software downloading tool in order to take advantage of
the latest improvements. This DL tool can be downloaded from support website (CSS/RSH).
4. Please upgrade the handset to latest software after all repairs is completed, and no matter what
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 34/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
http://rsh.a-novo.com/modules/sections/index.php?op=viewarticle&artid=2322
Note:
The device must enter the Download mode before the software download, please refer to below
method:
2) Press “Power key” + “Volume up key” + “Volume down key” at the same time for few seconds;
3) Enter the following interface (below pic) and press “Volume up key” to enter the Download mode.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 35/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Volume up key
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 36/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Rear/Front Camera
function failure
Upgrading software.
Enter MMI to check whether
Y
*Front Camera / Main Camera
/ Main2 Camera tests are ok Enter MMI test
#
Do DUALCAM VERIFY Y
Check whether Cam verify is
pass
N
N
Check whether the Camera Reweld or replace * Enter MMI, check whether
N Front Camera / Main Camera / Y
Connector is good Camera Connector
Main2 Camera tests are ok
Y N
Y N
Replace PCBA
End
Note:
* For dual camera maintenance strategy, front camera, Main/Main2 camera tests must be performed
in turn. This step would not pass as long as one camera test is not ok
The imaging of “MAIN CAMERA” is color image, “MAIN2 CAMERA” is black-and-white image
#
Refer to “DUALCAM VERIFY” test instruction.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 37/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
DUALCAM VERIFY test is mainly used to check/verify the assembly flatness of cameras, not to
calibrate.
Step 1:
mode->select “MANU”-
>”DUALCAM VERIFY”
Step 2:
If Camera module/main PCBA was
Choose “Yes” or “No” according replaced, but you choose “No” in this
step, it will cause no bokeh effect
to if camera module or main
when you shoot a portrait in Camera
PCBA is replaced App. Please redo “DUALCAM
VERIFY” and choose “Yes”.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 38/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Step 4:
2) “DUALCAM VERIFY” mainly affects camera bokeh effect. When complete above camera repair
process, please access “Camera” app->select “PORTRAIT” mode->shoot a portrait, double check
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 39/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
If there is no bokeh effect, please follow above “Separate Dual Camera repair process” to recheck.
5.1. Preparation
a) Do not start the disassembly process if without ESD protection, suggest sticking a warning poster
on the wall in the work room
b) Below is the ESD set up for the workbench in the work room
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 40/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
c) Make sure the personal ESD protection is ready before entering the work room
1 ESD glove
2 ESD smock
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 41/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
4 ESD shoes
d) Detect the wrist strap is working good by using ESD wrist trap tester, as below
Low:< R<800KQ
Normal: 800KQ≤R≤9MQ
High: R>9MQ
You may use the following tools during the disassembly and reassembly procedure:
Required
No Item Picture Remark
or not
✓
Plastic
1
flake
3 Pry Bar ✓
✓
Screws
4
driver
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 42/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
✓
SIM card
6
pin
Suction
7
cup
Solder
8
iron
It is suggested to
use HG2310
Hot wind (STEINLEL brand)
9
gun which can be used
for all components
on PCBA.
Heating
10
station
Simply
11 pluck TP PN: WAA3630UC002
JIG
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 43/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
The complete disassembly guide are described in the following for your reference only, you can
selectively (except disassembly and assembly method which needs to be followed carefully) do some
of those steps according to the spare part which you need to replace.
Note:
IMEI.
Step2: Separate and remove Furnished battery cover by using plastic flake.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 44/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
cover.
Step3: Firstly remove 17pcs screws on the phone; then remove Furnished Antenna Support and Furnish
Speaker Hold.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 45/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
screws as below:
: BMA1430265C3
PM1.4X0.3PXL3.0
Qty:16pcs
: BMA1415303C3
PM1.4X0.3PXL1.5
Qty: 1pcs
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 46/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Speaker Hold.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 47/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Step4: Separate some components and disconnect connectors as below; remove main PCBA.
1 1. P-sensor FPC
5 2. Fingerprint Module
6 8 3. Battery connector
8. RF cable connector
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 48/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Note:
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 49/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 50/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 51/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Note:
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 52/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Notice:
a) Improper operation on
battery will cause high risk
for fire or burning. Thus
please follow up the
battery disassembly
guidance strictly and pay
high attention to the
WARNING part. Do not
disassemble battery
unless it is necessary.
Step 6: Separate and remove some components from Front Furnished Underfilling
2. Receiver
3. Front camera
Note:
receiver, in especial, to
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 53/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
tweezers.
2) If there is no need to
device.
PCBA.
1. Speaker
2. L-sensor FPC
3. Coin Vibrator
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 54/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 55/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Description
1. RF cable 2. Main camera (13M) 3. Front camera (5M)
4. Main camera (8M) 5. Coin Vibrator 6. Speaker
7. Receiver 8. Fingerprint Module (Black) 9. Furnished Battery Cover
(Black-blue Gradient)
10. Main Camera Electric Fabric 11. Receiver Electric Fabric 12. Front Camera Electric Fabric
13. Screws (1pcs) 14. Screws (16pcs) 15. USB rubber
16. P-sensor rubber 17. Sub mic rubber 18. Main Camera rubber
19. battery pet 20. Hole Pet 21. Speaker pet
22. Furnish Speaker Hold 23. Furnished Antenna 24. LI-Polymer Battery
Support
25. L-sensor FPC 26. P-sensor FPC 27. ACF Module
28. Light Insulating Paper 29. Front Furnished 30. Furnished Battery Cover
Underfilling (Metallic Black) (Blue-purple Gradient)
31. Front Furnished Underfilling 32. Fingerprint Module (Blue) 33. MIC
(Bluish Black)
34. SIM Card Connector Holder 35. Audio Jack 36. BTB Connector(Socket) - P-
sensor FPC
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 56/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
37. USB Connector 38. coaixal connector (on the 39. BTB Connector(Socket) -
sub PCBA) Fingerprint Module
40. BTB Connector(Socket) - 41. BTB Connector(Socket) - 42. BTB Connector(Socket) –
Main camera (top side) Main camera (bottom side) sub PCBA FPC
/Front camera
43. BTB Connector(Socket) – 44. BTB Connector(Socket) – 45. RF Connector
TP/LCD FPC Battery
46. coaixal connector (on the 47. NUT connector 48. NANO SIM CARD connector
Main PCBA)
49. MICRO SD BLOCK 50. Antenna spring (sub 51. Antenna spring (sub PCBA)
PCBA)
52. Antenna spring (sub PCBA) 53. Antenna spring (Main 54. Battery Cover Tape04
PCBA)
55. Battery Cover Tape06 56. Battery Cover Tape05 57. Battery Cover Tape03
58. Battery Cover Tape02 59. Main FPC Electric 60. LCD FPC Electric Adhesive
Adhesive
61. Speaker Foam 62. Receiver Mesh 63. Speaker FPC
64. Sub PCB Fabric2 65. FP Conductive Tap 66. Light Sensor Electric Fabric
67. P-Sensor Electric Fabric
Note: Actual Spare Part List depends on the CU reference. Please check with RSH website or SCS
system for the spare part list of specific CU.
Below spare parts have different PNs, please refer to below table.
Please make reference to the disassembly process for assembly reverse an order of the disassembly
steps.
Attention:
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 57/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
➢ Before assemble Main PCBA on the Front Furnished Underfilling, you must confirm that P-sensor
FPC & rubber, front camera, receiver and Sub MIC rubber had assembled on the Front Furnished
Underfilling correctly.
➢ Before assemble Sub PCBA on the Front Furnished Underfilling, you must confirm that L-sensor
FPC, Vibrator and USB rubber had assembled correctly.
➢ Pay attention to the main dual camera’s order when assemble it on PCBA.
PN: ASA5001189C1
PN: ASA1300073C1
➢ Dual Cam verification must be done once camera module /main PCBA was disassembled/
reassembled.
➢ When assembling battery, make sure that battery pet (must replace a new one), TP/LCD FPC and
➢ Pay attention to the receiver and speaker’s direction when assemble them.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 58/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
➢ Before assemble the Furnished Antenna Support and Furnish Speaker Hold, please make sure that
all components and connectors assembled well.
: BMA1430265C3
PM1.4X0.3PXL3.0
Qty: 16pcs
: BMA1415303C3
PM1.4X0.3PXL1.5
Qty: 1pcs
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 59/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Passing through
➢ The below spare parts must be swap with new ones for the assembly.
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Description PN Picture
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 61/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 62/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 63/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 64/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 65/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 66/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 67/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 68/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 69/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
6. L2 trouble shooting
This chapter describes the Level 2 repair that can be done without any diagnostic equipment.
Please refer to <General L2 trouble shooting V1.1> in support (CSS/RSH) website for details.
http://rsh.a-novo.com/modules/sections/index.php?op=viewarticle&artid=2992
Note:
1) For Gauss’s side key, it can’t be disassembled, if want to replace it, please replace the Front Furnished
Underfilling;
2) As Gauss sub PCBA& main-sub FPC are integrated together, please pay attention when doing L2
trouble shootings;
3) As LCD& front housing &TP is dispensing component, please replace Front Furnished Underfilling if
5) In case the Level 2 repair can’t solve the problem, for L2 repair center, please exchange the PCB.
7. PCBA exchange
For L2 repair center, if Level 2 repair does not solve the failure, it is mandatory to change the PCBA and
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 70/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Please DO upgrade software and test again before exchanging the PCBA.
1) Collect the PCBA (without accessories, LCD and camera). MIC should be enclosed when you
2) Fill in the record sticker with IMEI number, fault code, short code, Hardware Technical Level and
software version.
3) All the defective PCBAs should be sent to RSH. If RSH send defective PCBAs for L3 repair, please DO
4) The IMEI1 was carved on the SIM tray, when you replace the main PCBA, please replace the SIM tray
8. Functional test
During the function test, the following items must be checked and validated.
6) Enter *#2886# at the dial mode to start the MMI test or using Smart Diagnosis Tool to do the test.
7) Perform a RF test according to the instruction and scripts available in the support website.
Feel free to contact your technical support should you need further information.
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
L1&L2 Service Manual TCL Communication Ltd.
Rev. Page
Gauss_5053A_D_K_Y_5153A_K Level 1 & Level 2 Service Manual
1.2 72/72
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.