Professional Documents
Culture Documents
Commercial Offer
Terms:
1.- Incoterms: CIF Callao port, Peru and San Antonio, Chile
3.- Payment terms: 50% TT in advance and 50% balance with shipping documents before loading
Main Specifications
Motor power: 1 phase, 220V, 50HZ, 1.1KW
Speed: 2,900 RPM
Optional Hopper Volume: 4L
Capacity: 20 ~ 500 kg/h
Processing Thickness: 2 ~ 40 um
Disc Diameter: 65: 65 mm
Cooling Pipe Diameter: 10 mm
Inlet Diameter: 30 mm
Outlet Diameter: 20 mm
Dimension: (L x W x H) 270x500x700 mm
Installation Type: Vertical
Contact Part Material: SUS304 stainless steel
Product Introduction
- Colloid Mill is a second generation of wet ultra-particulate processing equipment, suitable to grind, homogenize,
emulsify, disperse and mix various types of emulsion materials, wildely used in the indutries of food (fruit juice,
fruit juice, protein milk, soy milk, milk tea, dairy products), beverage, pharmaceuticals (various types of syrups,
detergents), chemicals (pigments, dyes, lubricants, petroleum catalysts), and etc.
- Main Features: compact design, good seal, stable performance, easy operation and high production efficiency.
- Work Principle: fluid or semi-fluid materials pass the gap between fixed tooth and rotation tooth which are
relative high-speed interlocking to make materials bear strong shearing force, frictional force and high-frequency
vibration force. Grinding is by the relative motion of toothed bevels, one rotates at high speed, the other keeps
static. In that case, materials passing the toothed bevels are greatly sheared and rubbed. At the same time, those
materials are under forces of high-frequency vibration and high-speed vortex, which make them ground,
emulsified, crushed, mixed, dispersed and homogenized, finally fine finished products are achieved.
circulation tube type sectional view of main parts rectangle outlet type
Core Parts
Typical Application
Please note:
1. Both JM-L50 and JM-L65 are originally designed for the purpose of lab test, only suitable for some soft
materials, mainly vegetables, such as chili, soaked soy bean, chopped tomato, etc. They are not suggested for
grinding nuts, such as peanut, almond, cashew nut, etc., cause the motor power is not strong enough
2. The capacity of both models is very low, and if you require a medium or high capacity, it is suggested to choose
JM-F100 or above models, which are with much higher motor power.
3. Both models could work with 1 phase 220V motor and 3 phase motor, and ONLY the 3 phase motor power
could be customized as 380V, 400V, 220V, etc.