Kelvion heat exchanger coils are manufactured with copper tubes and aluminum or copper fins. Special profiles on the fins, ⊲ ADVANCED AND RELIABLE THERMAL developed by our R&D department, enhance heat transfer and SELECTION CAPABILITIES maintain pressure drop at a moderate level. Collars allow for customized fin spacing, as well as providing ⊲ UNIQUE AND PATENTED the contact between the fin block and the tubes. Mechanical HIGH-PERFORMANCE FIN DESIGN expansion of the tubes guarantees a perfect bond between the fins and tubes for maximum heat transfer between both fluids. ⊲ EXCELLENT CUSTOMER SERVICE AND SUPPORT Several tubes are interconnected via brazed return bends to form the coil circuits, which receive the working fluid via brazed ⊲ FAST DELIVERY EVEN FOR tubular headers. 100% CUSTOM DESIGNED UNITS The thermodynamic design is created with our in-house ⊲ LONG LIFE CYCLE / DURABILITY developed selection software, based on the measurements in our laboratory, which conform to DIN EN1216. Rigorous testing supports quality control of our coils. Coil types Air heater, Air cooler, Run around coil, Condenser, DX Evaporator, Multi-sectional coil, Reversible coil, Heat pipe, Round / square coil
Technical specifications (further specifications on request)
Fin tube pattern
Tube arrangement staggered staggered
Tube pitch 25 mm 32 mm
Row pitch 21.65 mm 27.71 mm
Tube diameter 7.94mm 12 mm
Tube wall thickness 0.28 mm – 0.35 mm 0.35 mm – 0.8 mm