Airworks 5.00.00 P 07
Airbus A319, A320, A321 NORMAL PROCEDURES
Cockpit Door Surveillance System a
AIRPLANE FLIGHT MANUAL REV.A
SUEELEMEN | JANUARY 20, 2006
Selecting MANUAL Mode:
Select the Menu button.
BBA Ee call
This will bring you the menu shown below.
B wm oo] + | SWITCHER J PICTURE 8
Then select the switcher icon. This will bring you to the menu shown below:
CS ee
From the auto/manual menu, touch the "MANUAL" icon. The menu shown below will appear.
Bn eee eral
Touch the icon for the camera you want to see.
NOTE: This is the default menu that will always be displayed when the CDSS system is tuned
on.
EFFECTIVITY CODE
004Airworks 5.00.00 P08
Airbus A319, A320, A321 NORMAL PROCEDURES
Cockpit Door Surveillance System —
AIRPLANE FLIGHT MANUAL | | REV.A
SUPPLEMENT | JANUARY 20, 2008
LOPA (Location of present arrangement)
Within the manual mode, there is a feature that allows the selection of a camera view based on its
location. To activate, just touch the screen in any area where there are no icons displayed
The following On Screen Display will appear:
Figure 3 - CDSS System LOPA Display
The LOPA allows the viewer to select a camera by its location in the cabin, Touch the icon labeled
"1" to view camera number 1. To return to the main menu and make the LOPA display disappear,
press the icon labeled "BACK"
Adjusting the picture
Touch the “MENU” icon. The On Screen Display will change to the menu shown below:
ae ee
Touch the “PICTURE” icon. The On Screen Display will change to the menu shown below:
EFFECTIVITY CODE
004pinworice! 5.00.00 P 09
Airbus A319, A320, A321 NORMAL PROCEDURES
Cockpit Door Surveillance Systom —
AIRPLANE FLIGHT MANUAL REV. A
‘SUPPLEMENT JANUARY 20, 2006
HEED EREEES
This menu allows you to choose which camera views display you want to adjust. You can choose
an individual camera, or you can select "ALL" to adjust the display of all of the cameras together.
When a camera icon is touched, the following menu will appear:
1a aeeoe
Select the function to be adjusted by touching its icon, then press the plus “+" or minus *-" icon
repeatedly until the desired level of that function is reached. Press “SET” to keep the changes to
the setting you have made.
Picture Control
Below is a description of functions for picture control
= Level Indicator
Default Factory Settings
rightness
Picture
Contrast
= Save Changes to Settings
|
O
=
EFFECTIVITY CODE
004| Airworks ee "6.00.00 P 10
Airbus A318, A320, A321 NORMAL PROCEDURES
Cockpit Door Surveillance System |__|
AIRPLANE FLIGHT MANUAL | REV.A
| SUPPLEMENT JANUARY 20, 2006
Cabin Ready Switch (optional)
The optional CDSS System “Cabin Ready” switch is located at the FWD flight attendant panel. A
flight attendant can press the Cabin Ready switch (if equipped), letting the pilot know that the cabin
and the passengers are ready for take-off or landing
When pressed, the Cabin Ready switch sends a signal to the CDSS monitor, which will then display
“CABIN READY’ on bold green letters on the LCD screen.
The Pilot or Co-Pilot will see the signal, and then acknowledges it by touching the LCD screen.
Touching the monitor screen cancels the annunciation on the monitor and extinguishes the Cabin
Ready switch located at the FWD flight attendant panel
EFFECTIVITY CODE
004Airworks
6.00.00 P o1
Airbus A318, A320, A321 PERFORMANCE
| Cockpit Door Surveillance System _——
AIRPLANE FLIGHT MANUAL | REV.A
‘SUPPLEMENT JANUARY 20, 2006
PERFORMANCE
No Change.
EFFECTIVITY CODE
ALL