Professional Documents
Culture Documents
IT-G500 Series
Software Manual
(Version 1.01)
June 2015
Table of the Contents
1. Product Overview·························································································································································7
1.1 Basic Description··················································································································································7
1.1.1 Model by Feature ··········································································································································7
1.1.2 Name of parts·················································································································································8
1.2 IT-G500 Software Configuration·····················································································································9
1.2.1 Standard application composition ········································································································ 10
1.2.2 Option software structure ······················································································································ 15
2. Function ····································································································································································· 16
2.1 Display································································································································································· 16
2.1.1 Display control········································································································································ 16
2.2 Key control························································································································································ 18
2.2.1 Key types···················································································································································· 19
2.2.2 Key assignment······································································································································ 22
2.3 Touch panel······················································································································································ 27
2.3.1 Function ······················································································································································ 27
2.4 Audio/ buzzer··················································································································································· 28
2.4.1 Audio····························································································································································· 29
2.4.2 Buzzer··························································································································································· 30
2.5 LED ········································································································································································ 31
2.5.1 LED control ··············································································································································· 32
2.6 Vibrator································································································································································ 35
2.6.1 Vibrator control······································································································································· 35
2.7 Storage ································································································································································ 36
2.7.1 Flash disk··················································································································································· 36
2.7.2 SD card ························································································································································ 37
2.7.3 Precautions ··············································································································································· 38
2.8 Power control ·················································································································································· 39
2.8.1 Power On/ power Off ··························································································································· 40
2.8.2 Power key control ································································································································· 42
2.8.3 Reset and resume control ················································································································ 43
2.8.4 Charge setting ········································································································································· 44
2.8.5 Power-saving control ·························································································································· 45
2.9 Laser scanner (barcode)··························································································································· 47
2.9.1 Scannable codes ··································································································································· 47
2.9.2 Scanning method ·································································································································· 49
2.9.3 Scanning conditions···························································································································· 50
2.9.4 Scanning result output format······································································································· 52
2.9.5 Scan result notification······················································································································ 58
2.9.6 Expanded functions····························································································································· 59
2.9.7 Power control··········································································································································· 61
2.10 Imager (1D/2D codes) ································································································································· 62
2.10.1 Barcode scan specification············································································································· 62
2.10.2 Scanning method ·································································································································· 65
2.10.3 Scanning conditions···························································································································· 66
2.10.4 Scan result notification······················································································································ 67
2.10.5 Expanded functions····························································································································· 68
2.10.6 Basic Functions······································································································································ 71
2.10.7 Common functions ······························································································································· 73
2
2.11 Camera (stills and video photography)···························································································· 74
2.11.1 Basic Functions······································································································································ 75
2.11.2 Preview display function··················································································································· 76
2.11.3 Still images capture and file saving functions····································································· 77
2.11.4 Video shooting functions ················································································································· 78
2.11.5 Photography modes and camera adjustment functions················································ 79
2.12 NFC (Near Field Communication)········································································································ 83
2.12.1 List of cards ready for communication ···················································································· 83
2.12.2 Communication functions················································································································ 85
2.12.3 Expanded functions····························································································································· 87
2.12.4 Power control··········································································································································· 87
2.13 USB········································································································································································ 88
2.13.1 Basic specifications····························································································································· 88
2.13.2 LAN cradle IP setup ····························································································································· 91
2.14 Bluetooth···························································································································································· 92
2.14.1 Basic specifications····························································································································· 93
2.15 WLAN···································································································································································· 97
2.15.1 Function summary································································································································ 97
2.15.2 Casio expanded features ·················································································································· 99
2.15.3 Wireless LAN settings ······················································································································ 102
2.16 WAN (voice calls/ data communications/ SMS)········································································ 109
2.16.1 Function summary······························································································································ 109
2.17 GPS······································································································································································ 110
2.17.1 Function summary······························································································································ 110
3. Introduction···························································································································································· 111
3.1 Perform Initial Setup·································································································································· 111
3.1.1 Startup screen ······································································································································· 111
3.1.2 Date/Time/Alarm Setting ····················································································································· 112
3.1.3 Owner Information ··································································································································· 113
3.1.4 Regional Settings······································································································································ 114
3.1.5 Power···························································································································································· 116
3.1.6 CPU Speed ················································································································································· 117
3.1.7 Charge Setting ······································································································································ 118
3.2 Input/Display Settings ······························································································································ 119
3.2.1 Desktop setting····································································································································· 119
3.2.2 Vibrator Property ····································································································································· 120
3.2.3 Buttons ························································································································································ 121
3.2.4 Backlight······················································································································································ 122
3.3 Setting method of the volume····················································································································· 124
3.3.1 Sounds & Notifications··························································································································· 124
3.3.2 Buzzer ·························································································································································· 125
3.4 Security Settings ········································································································································· 126
3.4.1 Terminal Password Settings········································································································· 127
3.4.2 Encryption ··············································································································································· 128
3.5 Laser Scanner (1D) Settings ······················································································································· 129
3.5.1 Laser Setting ············································································································································· 129
3.5.2 Laser Scanner Demo ······························································································································ 133
3.6 Imager (2D) Settings······································································································································· 135
3.6.1 Imager Settings ········································································································································· 135
3.6.2 Image Scanner Read·························································································································· 141
3.6.3 Image Scanner Demo······························································································································ 142
3.7 Set NFC (Near Field Communication) Card Reading····························································· 144
3
3.7.1 NFC Demo················································································································································ 144
3.8 Set LAN ····························································································································································· 146
3.8.1 LAN Cradle Setting Tool·················································································································· 146
3.8.2 Connections ··············································································································································· 149
3.9 WLAN Settings·················································································································································· 152
3.9.1 WLAN Power Settings ······················································································································ 152
3.9.2 WLAN Settings······································································································································ 153
3.9.3 WLAN Barcode Setting Tool ········································································································· 159
3.10 Bluetooth Connection ······························································································································ 160
3.10.1 Bluetooth Manager··································································································································· 160
3.11 Backup User Data ······································································································································· 161
3.11.1 Backup Tool············································································································································ 161
3.12 Duplicate a Terminal·································································································································· 167
3.12.1 Copy Devices Tool······························································································································ 167
3.13 Automatically Install Software············································································································· 176
3.13.1 Auto Setup··············································································································································· 176
3.14 Enable WAN (voice call/SMS) ·············································································································· 177
3.14.1 Phone·························································································································································· 177
3.14.2 Wireless Manager································································································································178
3.15 Use the Country-Specific WLAN Setting Tool ··········································································· 179
3.15.1 Function Summary ····························································································································· 179
3.15.2 Configuration Files····························································································································· 180
3.15.3 Command Line Argument ·············································································································· 183
3.15.4 Startup Screen ······································································································································ 184
4. Operation ································································································································································· 186
4.1 Start/ Close the Unit··································································································································· 186
4.2 Input from the Software Input Panel (SIP)···················································································· 187
4.2.1 Operation Method································································································································187
4.3 Use mobile camera ·········································································································································· 188
4.4 Connection operation of the internet······································································································· 193
4.4.1 Internet Explorer ······································································································································ 193
4.5 Operating method of a PC connection utility························································································ 194
4.5.1 USB to PC ·················································································································································· 194
4.5.2 LMWIN(Upload/download utility)······································································································· 195
4.5.3 FLCE ····························································································································································· 196
4.5.4 ActiveSync··············································································································································· 197
4.5.5 Windows Mobile Device Center (WMDC)··············································································· 197
4.5.6 Remote Desktop Connection ······································································································· 198
4.6 Use Phone ······················································································································································· 200
4.6.1 Make a Call ·············································································································································· 200
4.6.2 Receive a Call ········································································································································ 202
4.6.3 Register a Phone Number in Contacts ··················································································· 202
4.7 Operation of an application program········································································································· 203
4.7.1 Calculator ················································································································································· 203
4.7.2 Notes ··························································································································································· 203
4.7.3 E-mail·························································································································································· 204
4.7.4 Text Message ········································································································································· 205
5. Maintenance··························································································································································· 206
5.1 File Operations ············································································································································· 206
5.1.1 TextEditor················································································································································· 206
5.1.2 FCHKCE······················································································································································· 206
4
5.1.3 File Explorer ··········································································································································· 207
5.2 The way to remove Micro SD card ··········································································································· 209
5.2.1 Removal procedure on Micro SD card······························································································209
5.3 Terminal Log Viewer ······································································································································· 210
5.3.1 Log Viewer·················································································································································· 210
5.3.2 Storage Manager ······································································································································ 211
5.4 Investigation of the communication environment ················································································ 212
5.4.1 REBIND tool ··············································································································································· 212
5.4.2 NetSearch················································································································································· 213
5.4.3 GPS Information··································································································································· 216
5.5 Maintenance of a system······························································································································ 221
5.5.1 System information·································································································································· 221
5.5.2 Version information ································································································································· 223
5.5.3 Remove Programs···································································································································· 224
5.5.4 Auto Restore Tool ·······························································································································224
5.5.5 Module Update Tool··························································································································· 226
6. Appendix ····································································································································································· 229
6.1 Standard with the application list ·············································································································· 229
6.2 Optional Software List ··································································································································· 234
5
Editorial Record
Manual
Date edited Page Content
Version no.
1.00 March 2015 New version
1.01 June 2015 92 "2.14 Bluetooth" feature list modification
27 "2.3 Touch panel" description modification
88 "2.13 USB" Description Add (microA/B connector
fixed mode)
75 "2.11 Camera" Software functions modification
219 Description additional to "5.4.3 GPS Information"
"A-GPS function setting"
121 "3.2.3 Buttons" Description amended
62-71 "2.10 Imager (1D / 2D codes)" Description
amended
6
1. Product Overview
Product overview
Product name Scanner W-LAN NFC Mike Remarks
※1 ※2
OS Camera GPS ※3 ※4
Imager Receiver
WEH6.5
IT-G500-C16E 1D ○ × ○ ○ ○
Classic
WEH6.5
IT-G500-GC26E 2D ○ ○ ○ ○ ○
Pro
WEH6.5
IT-G500-15E 1D × × ○ × ×
Classic
WEH6.5
IT-G500-25E 2D × × ○ × ×
Classic
WEH6.5
IT-G500-C26E 2D ○ × ○ ○ ○
Classic
WEH6.5
IT-G500-GC16E 1D ○ ○ ○ ○ ○
Pro
WEH6.5
IT-G500-G15E 1D × ○ ○ × ○
Pro
7
1.1.2 Name of parts
The main item name of IT-G500 terminal is as follows.
Scanner
Scanner
(2D)
(1D)
NFC
NFC
Receiver
Speaker MIC
8
1.2 IT-G500 Software Configuration
Loaded OS is WEH6.5 Pro (Windows Embedded Handheld 6.5 Professional).
The main software structure is as follows.
Features
Easy-to-use user interface
RDP7.0 Support
NDIS6.1 Support
Ease of development with an open environment
AYGShell By Widnows Mobile Application behavior
OS Module and base most of the behavior of the driver font file and application program NAND
From the disk RAM To the very fast execution performance can be obtained to expand the work.
Software configuration
CASIO Application
Microsoft
Application
Device Library
Microsoft Middleware
(.Net Framework、etc)
Base software(OS)
Hardware
Sub Micon
9
1.2.1 Standard application composition
The application function by which standards are loaded into IT-G500 is as follows.
No Name Description
10 Alarms Set the date and time, and you can set the alarm sound.
10
No Name Description
30 Copy Devices A copy between the terminal of the user data is performed.
43 Remote Desktop Mobile The client software I do remote desktop juncture of.
From SD card slot of the device, in a state in which it does not
44 Remove SD
suspend, remove the Micro SD card.
45 SimTkUI SimUI information is indicated.
11
(2) Start-Settings Menu
No Name Description
2 Clock & Alarms The time and a time zone are set as the present date.
6 Sounds & Notifications The kind of sounds and the volume are established.
No Name Description
12
(4) Start-Settings-Connections Menu
No Name Description
No Name Description
13
No Name Description
Imager Setting
17 This sets the laser scanner (1D).
(1D model only)
Scanner Setting
18 This sets the imager (1D, 2D).
(2D model only)
The location correction and the character size a screen is pointing
19 Screen
and by which it's a touch screen are adjusted.
The indication and the connection utility of the USB state of the
22 USB Connection
connection are changed.
14
1.2.2 Option software structure
The software which consists as an option is as follows.
No Name Description
1 Wireless LAN measuring tool A CT client tool does wireless LAN measurement.
Wireless LAN barcode setting
2 This tool does WLAN setting by barcode scan.
tool
4 Module renewal editor This tool makes a module renewal specification file.
5 WLAN country basis setting tool This tool establishes a wireless LAN by country.
15
2. Function
This document explains the details of the functions of the unit and its options.
2.1 Display
Information is displayed on a 4.3 inch WVGA screen size (800 dots vertically x 480 dots
horizontally).
The main functions are as follows.
i The display resolution is WVGA (default) and there is an on/off function for screen display.
ii The display can be rotated (90°, 180°, 270°).
iii The backlight has an on/off function (with an Auto Dimming function)
[List of Functions]
No Windows Embedded
Function
. Handheld 6.5 model
1 Backlight brightness adjustment Yes
2 Backlight Auto Dimming Yes
3 Backlight Auto Off Yes
4 Screen display rotation Yes
5 Virtual Off Yes
6 Backlight brightness restriction by the Yes
temperature sensor
16
(2) Backlight auto dimming (only under battery power)
- If the terminal is left over in idle state, with no key or touch panel input, the backlight will dim
automatically (the auto dimming function is only enabled under battery power).
When key or touch panel input resumes, the dimmed state is canceled and the display reverts to
normal brightness.
- Auto dimming setting can be changed between yes/no using the contrast and brightness
properties (default: Yes), and the standby time before dimming (default: 1 minute) can be
changed.
- The setting for the brightness of the LED backlight during auto dimming can be changed using
contrast and properties. (Eight levels are available, the default is the third level).
(6) Backlight brightness restriction by the temperature sensor (under external power
supply or battery power)
i The backlight brightness is automatically restricted when the temperature inside the terminal is
high.
- There are two levels of restriction. The first restricts backlight brightness so that it can only be
set to the level levels from 1 to 7 out of 9.
- The second level restricts brightness so that it can only be set to the level levels from 1 to 5 out
of 9.
ii If normal brightness or brightness when dimmed by the auto dimming function (only under
battery power) is set higher than the valid range (levels) under restriction, the display is
automatically dimmed to the highest level allowed in the restricted range. Once the temperature
drops and the restriction is canceled, brightness automatically reverts to its previous level.
17
2.2 Key control
This section explains the functions of the control keys, input keys, function keys, and trigger keys.
The function keys correspond to F1~F4, and the Fn key displays the control keys.
Key layout
5. Center
4. Function keys trigger key 4. Function keys
Power key
2. Cursor keys
1. Control
keys
3. Input keys
1. Control keys
These are the Power key, Enter, Character, Fn, and CLR.
2. Cursor keys
These work in the same way as the up, down, left, and right cursor keys of a PC.
3. Input keys
Press these to input numbers and text.
4. Function keys
Use these to start pre-registered applications.
Note) There are also left and right trigger keys. Refer to the layout diagram in “1.1.2 Names of
parts” for key positions.
18
2.2.1 Key types
The usable keys are as follows:
19
(3) Key mode transition suppression
Suppresses key mode transitions.
When the mode is switched sequentially through [1]->[A]->[a]->[P]->[1] (repeating), and [A], [a], and
[P] are set as suppressed,
switching changes to run sequentially through [1]->[1] (repeating).
Setting can be made from the application by using a system library.
For details, refer to the System Library Manual.
20
(7) Input switch key control
Press the character key to switch the input mode. The current key mode is indicated on the task tray
title bar.
The function mode and lock mode are common to all modes, regardless of IME status.
Lock mode Input from keys other than the Power key and trigger keys is
prohibited.
21
2.2.2 Key assignment
The following are the key codes and function assignments.
22
KEY Specialized operations Operation specification Remarks
Left In character input 1 Left key
mode A Left key
a Left key
P Left key
In Fn mode F Left key (also the left key during
conversion)
Right In character input 1 Right key
mode A Right key
a Right key
P Right key
In Fn mode F Right key (also the right key during
conversion)
23
(3) Trigger keys (scanner-equipped models)
KEY Specialized operations Operation specification Remarks
R-trigger In character input 1 R trigger key
mode A R trigger key
a R trigger key
P R trigger key
In Fn mode F R trigger key
L-trigger In character input 1 L trigger key
mode A L trigger key
a L trigger key
P L trigger key
In Fn mode F L trigger key
Center In character input 1 Trigger key
Triggers mode A Trigger key
a Trigger key
P Enter key
In Fn mode F Trigger key
24
(5) Numerical keypad
KEY Specialized operations Operation specification Remarks
0 In character input 1 “0”
mode A -_/^¥&=+$%#*space€ Space is a
single-byte space
a -_/^¥&=+$%#*space€ Space is a
single-byte space
P “0”
In Fn mode F Display/ hide SIP (input panel)
1 In character input 1 “1”
mode A ?!()<>[]{}
a ?!()<>[]{}
P “1”
In Fn mode F Turns the backlight on or off
2 In character input 1 “2”
mode A ABC
a abc
P “2”
In Fn mode F Key backlight On/Off
3 In character input 1 “3”
mode A DEF
a def
P “3”
In Fn mode F Disabled No function
4 In character input 1 “4”
mode A GHI
a ghi
P “4”
In Fn mode F Initiate calibration
5 In character input 1 “5”
mode A JKL
a jkl
P “5”
In Fn mode F Dims the backlight
25
KEY Specialized operations Operation specification Remarks
6 In character input 1 “6”
mode A MNO
a mno
P “6”
In Fn mode F Brightens the backlight
7 In character input 1 “7”
mode A PQRS
a pqrs
P “7”
In Fn mode F Disabled No function
8 In character input 1 “8”
mode A TUV
a tuv
P “8”
In Fn mode F Disabled No function
9 In character input 1 “9”
mode A WXYZ
a wxyz
P “9”
In Fn mode F Disabled No function
- In character input 1 “-”
(Hyphen) mode A @.,”’`:;~|
a @.,”’`:;~|
P *
In Fn mode F “.”
. In character input 1 “.”
(Period) mode A “.”
a “.”
P #
In Fn mode F “.”
26
2.3 Touch panel
The touch panel can be used to perform input operations from the screen.
The main features are as follows:
2.3.1 Function
No. Item Description
1 Tap sound The tap sound can be set to mute, low or loud from “Volume & Sounds” on
the Control Panel
2 Tap and hold Tap on the screen and then hold the contact to display a pop-up menu
relevant to the tapped object.
3 Coordinate rotation When screen rotation display is used with the display function, the
coordinates of the touch panel will also flip in unison.
4 Input interrupt Disables touch panel input.
5 Calibration The unit is equipped with a calibration function for coordinate correction.
Set data for calibration is saved to flash disk when the Welcome wizard
runs on first startup, and when calibration is run by pressing the “Fn + 4”
keys. Therefore, even if the batteries run down, there is no need to run
calibration again. The touch panel calibration may drift due to deterioration
over time, voltage fluctuation temperature change, etc.
If it does, re-calibrate the touch panel settings.
6 Multi-touch Touch and press two points in the coordinate system to use the multi-touch
function.
i The default setting for multi-touch is enabled.
(It is enabled even after reset and full reset)
ii Multi-touch settings are maintain through Off/On, but are initialized by
reset and full reset.
iii The setting for multi-touch immediately after a change is enabled.
27
2.4 Audio/ buzzer
The functions are as follows:
1. Mic function
– Use this to record sound to the Voice Recorder. (Monaural)
– Use conversation over WAN (only models equipped with WEH6.5 Pro) The output target during
talk is the receiver.
2. Speaker function
– Use this to play audio memos and WAV files. (Stereo sound -> converted to monaural for
output)
– Output the key click and alarm sounds.
– Each sound can be muted or set for volume individually.
– The shutter sound is output from the speaker. (but not during talk)
4. Buzzer functions
– The scan complete sound, warning sound, and user-specified sounds are produced.
– The buzzer sound is output from the speaker, with higher priority than audio data.
5. Headphone jack
– Casio-approved headsets can be used.
– Plugging a headset into the jack automatically switches the audio channel.
Earphone mic
28
2.4.1 Audio
Audio supports WAV playback, voice recording, and other functions. Stereo data is converted to
monaural for output. Voice Recorder is an installed sound-related application.
- Play
KHz 8 11.02 12 16 22.05 24 32 44.1 48
Sampling 5
frequencies Monaural O O O O O O O O O
Stereo O O O O O O O O O
Sampling frequencies other than those above are not supported
Stereo/ monaural 8bit or 16bit
In reality, the integrated monaural speaker does not output sound in stereo.
- Record
KHz 8 11.02 12 16 22.05 24 32 44.1 48
Sampling 5
frequencies Monaural O O O O O O O O O
Sampling frequencies other than those above are not supported
Stereo/ monaural 8bit or 16bit
* Only monaural input via the microphone.
- Volume setting
The Control Panel Volume & Sounds can be used to set up sound volume in six levels from loud to
low, and mute ON/OFF. Refer to “3.3.1 Sound/ notification settings” for the Tools screen.
Setting can also be made from the application by using a system library.
For details, refer to the System Library Manual.
- Functions
No. Item Description
1 Shutter sound The shutter sound WAV is output from the speaker when a photo is
output taken with the camera, to prevent voyeurism. The shutter sound cannot
be disabled. It is output at fixed volume, regardless of the volume setting.
The shutter sound is still output from the speaker when the earphone
jack is connected. Even if another sound is being played when the photo
is taken, that sound is suppressed to forcibly play the shutter sound.
2 Incoming calls The mobile headset that connects to the earphone jack has a button.
button control When the button is pressed, it issues an incoming call response event to
VoIP.
3 Audio output This function switches the audio output destination over to Bluetooth if a
destination switch Bluetooth headset is used. The default is to output from the speaker.
4 Audio ON/OFF The audio system can be disabled for power-saving control. This can be
set from a user application by API.
5 Virtual Off When the system has entered virtual off state, audio output requests are
ignored. Even the sound of ringing is muted. On restoration from the
virtual off state, audio output requests are accepted.
6 Audio operation Audio operation is enabled during Lithium Ion battery operation.
restriction due to
battery power
29
2.4.2 Buzzer
The buzzer outputs sounds from the speaker for scan complete, key click, tap sound, alarm sound,
warning sound, and other optional sounds. It does not output through headphones. Use the audio
driver function to output through headphones.
Buzzer sounds have the following six types of attributes. The default values are as stated in the
table below.
i Buzzer sound volume can be set in three levels, low, medium, and high. However, the key click
and screen tap sounds can only be set to two levels, low and high. Mute can be turned on and
off.
Refer to “3.3 Volume settings” about tool operation.
Note) When the system has entered virtual off state, buzzer output requests are ignored. Even the
sound of ringing is muted.
30
2.5 LED
There are two LEDs, LED1 and LED2 These can be turned on and off individually.
The functions of each are as follows:
LED1 LED2
Color Purpose
LED1 Orange Recharging
(Recharge) Green Recharging complete
Red Recharge error
Blinking red Recharge error
LED2 Red User notification (alarm), scanning error
(General Green Scanning successful
purpose) Blue Connection established via Bluetooth
Orange SS wireless connected, W-WAN connected, GPS connected
Magenta In USB connection (ActiveSync, FLCE, WMDC, LMWIN, etc.)
Cyan Resuming
All colors can be used by user specification.
31
2.5.1 LED control
The main functions are as follows.
For details of the library, refer to the System Library Manual.
32
(4) Bluetooth connection status LED
This is used for notification of Bluetooth connection status.
- Use as the scanner scanning LED has priority. User access from a private library is also possible.
- Use as the scanner scanning LED has priority. User access from a private library is also possible.
- Use as the scanner scanning LED has priority. User access from a private library is also possible.
- W-LAN wireless, W-WAN, and GPS all control the LED in the same color category, so the have the
same lighting specification.
- Use as the scanner scanning LED has priority. User access from a private library is also possible.
- W-LAN wireless, W-WAN, and GPS all control the LED in the same color category, so the have the
same lighting specification.
33
(8) Virtual Off
When the system has entered virtual off state, LED lighting requests are ignored. However, a LED
that is already on will not be turned off. LED lighting requests are accepted again on restoration
from the virtual off state.
34
2.6 Vibrator
Vibrator (vibration) operates for scan complete, alarm occurrence, warning occurrence, wireless
incoming call, and user-defined purpose.
Each vibration operation can be turned on and off individually. The functions of each are as follows:
- Virtual Off
Vibrator vibration requests are ignored. Vibration that is already in progress is stopped.
Vibrator vibration requests are accepted again on restoration from the virtual off state.
35
2.7 Storage
This unit has slots for fast, high-capacity Flash Disks and Micro SD cards.
36
2.7.2 SD card
This unit supports Micro SD cards (maximum capacity: 32GB, SDHC standard).
When a Micro SD card is inserted, it can be used for memory expansion or external storage.
Supported Folder
Slot type
capacity name Access width Remarks
microSD 32GB SD card 4 bits SDHC supported
Write protection is not supported (Micro SD does not have a write protection switch).
Card detection does not trigger wakeup.
Micro SD card format tool (Control Panel -> Memory Area Manager)
Partitioning of cards is not supported
Partitioning of Micro SD memory cards is not supported.
SD memory cards that are already partitioned are not supported.
37
2.7.3 Precautions
The following operations on FlashDisk and Micro SD card risk corrupting some or all of the data they
contain.
38
2.8 Power control
This section explains the power control functions.
3 Memory check Checks the status of memory after power is turned on. Displays a
warning message on the screen if the memory is corrupted.
4 Power key control Settings can be made to disable the Power key or prohibit turning the
power off.
5 Reset and resume There are reset methods based on various conditions (5 types).
control A reset clears program execution status, but resume restores the
program execution state that preceded the power being turned off.
6 Recharge settings * Provide a functions from a tool to set the terminal recharge method.
Normal: Recharge normally.
Eco charge: Use Eco recharge
39
2.8.1 Power On/ power Off
The factors which turn unit power On and Off (suspend and resume) are as follows.
[Caution] Power does not turn on if the following occur during the startup check.
- When main battery voltage level is insufficient to start up the terminal
- The battery lock is open.
[Caution] If the unit is turned off by factor [3] or [6], a pop-up is displayed on the screen on the next
startup.
40
(4) Temperature restriction control
When external temperature is high and the unit’s devices are operating at full capacity (high CPU
speed, continuous camera operation, continuous wireless communications) etc., the internal
temperature of the unit rises and eventually a warning is issued and the power is turned off to
protect the unit. In that case, either turn off the power and leave the terminal unused for a while, or
move it to a location where the surrounding air temperature is cooler.
If power is turned off due to the temperature restriction, a warning message is output when the
terminal is turned on again
Warning the next time the unit starts after being turned off due to temperature
restriction
41
2.8.2 Power key control
The Power key must be pressed for approximately one second for the system to recognize turning
on the power.
The Power key must be pressed for approximately one second for the system to recognize turning
off the power.
WM_POWERBROADCAST
PBT_APMSUSPEND
The message is issued only once when the Power key is pressed for the first time after setting.
The setting is canceled by turning the power off, or by a reset.
For details, refer to the System Library Manual.
This function is used to realize the virtual off state. Refer to the section on virtual off.
42
2.8.3 Reset and resume control
When a power on factor occurs, resume or reset is used to start the system.
A reset clears program execution status.Therefore, data on the RAM in work is discarded, because
there is a possibility that in the middle of writing a file is corrupt, you need to be careful.Resume,
will return to the program execution state before power OFF.
(1)Resume
If the device has had its power turned off (to suspend) normally, it resumes the next time its power
is turned on.Resume, and continue the process that was running the last of the power supply is
OFF.Program execution memory in RAM, unsaved data in use, and data in data storage memory
and FlashDisk are retained.
(2)Reset
When you press the RESET button, or you can run when you perform a soft reset function.
Running program is discontinued, after shutdown process, and then run the reboot of the OS.Root
disk (¥, ¥ Windows folder, etc.) and registry information, FlashDisk, data on the SD card will be
retained.
[Caution]
(1) If you lock the system during the reset process (when no response time is more than about 10
seconds), it will be forced to reset by skipping the shutdown process.
(2)When not restarting the body even if a RESET button is pressed, please do the following
operation."CLR" while a key and a "0" key are being pushed, a RESET button in the body back
is pressed.
(3)Full reset
This occurs if both Fn and CLR keys are held down at the same time and then the Reset button is
pressed for a period of one second or longer, by default, while the terminal is in operation.
Running program is discontinued, after shutdown process, and then restart the OS.
In this situation, the confirmation message “OK to clear?” is displayed twice. Use the right trigger
key and left trigger key to confirm. If the right trigger key is pressed in response to both times the
confirmation message is displayed, the memory (data storage memory, and OS and program
execution memory) is cleared, and initialization is performed. However, data on FlashDisk is
retained.
43
(4)User disk clear
Press the Reset button for a period of one second or longer while the Fn key, CLR key, and the
period key are pressed.Full reset and similar warning screen appears.
Operation is also the same.Root disk (¥, ¥ Windows folder, etc.) and the registry, is initialized to the
factory default state.After formatting the FlashDisk, you can start it and then re-load the OS to RAM
do the reset process.
(Such as patch that is placed on a FlashDisk (CAB file) also disappears.)
(5)Power-on reset
This happens if there is no external power supply (AC) and the main battery are not in place, so the
unit has absolutely no battery power (discharged), and then a battery is fitted into the unit.
All RAM data storage memory (data and databases saved by the user, applications installed in
RAM, etc.), program execution memory used by the OS and applications, and memory used by
drivers are all “completely initialized” (clear). However, data on FlashDisk is retained.
RAM 4 minutes in a state of disconnect the battery, clock, 72 hours will be backed up.
(I call the state that holds only watch and RTC backup state).
[Note] please refer to "3.1.8 Ecology charge setting" about a setting tool.
44
2.8.5 Power-saving control
(1) Sleep
The CPU transitions into idle state for power saving when the system and applications have nothing
to do and are waiting for events. The peripheral devices are operating.
The CPU frequency can be switched by a user setting, so switch it for processes that required speed,
or to save power. The settings can be changed from CPU Speed on the Control Panel, or from the
system library. CPU frequency can be selected from Powersave (low), Normal, and Turbo. There is
also an automatic mode in which the CPU automatically measures CPU load and changes the
frequency accordingly.
The default is automatic.
45
(5) Virtual off (wireless standby)
Virtual Off is a wireless standby state due to low power consumption. To the user, the unit behaves
as if it is off (suspended). Internally, the terminal is running normally but it seems to be turned off
(suspended) - nothing is displayed and you cannot make key inputs. This function is mainly used to
enable the terminal user to resume communication quickly, while also saving power in
communications standby state. It saves power during standby for wireless communications etc. by
turning the LCD, keys, and touch panel off through an API from an application.
In the diagram in Figure 2.11, the application receives PBT_APMSUSPEND message at the first
press of the Power key and then changes the state to Off State in the Virtual Off mode. And then
the application receives PBT_APMRESUMESUSPEND message and returns to the on State of
the Virtual Off mode.
The application undertakes the transition process to the Off state in the Virtual Off mode. The
application disables display, key input, and touch panel operation, etc. and turns off the power to
unnecessary devices.
46
2.9 Laser scanner (barcode)
*1 Interleaved 2 of 5
The minimum no. of digits can be set to two digits only when scanning Interleaved 2 of 5
symbology is enabled.
47
*2 RSS Expanded
The maximum digit count for just numeric data is 74 digits, or the maximum digit count for just
alphabet data is 41 digits.
*4 Code128
Maximum number of columns of CODE-A, B is 77 digits.
Maximum number of columns of CODE - C will be 100 digits.
Readable digits
The actual readable digits on a barcode differ depending on the resolution and the scanning
distance between the terminal and the bar code.
48
2.9.2 Scanning method
The laser scanner has “scanning state” (emits a laser beam to read a barcode) and “standby state”
(scanning is halted and the terminal remains in a standby state).
These two states are controlled to start and stop barcode scanning.
The scanning method set by default is “Continuous scanning (controlled with Trigger key)” and
“Scanning attempts = 1”.
Multi-step reading
This method is for scanning a specified number of barcodes. Once scanning for the specified
number of bar codes has been completed, the scanner closes and will not scan again until
reopened.
Also, the same bar codes that have been scanned previously cannot be scanned again.
49
2.9.3 Scanning conditions
Conditions that allow scanning a barcode symbology in specific modes can be set for each
readable symbology.
Readable digits
The no. of digits to read can be set for each readable symbology.
If only a specific no. of digits is to be scanned, specify it for each readable symbology. This will
reduce decode processing time and lower the error rate.
50
Validation count
Validation is carried out for a specified number of times to check if scanned data is valid, and then
the data is output only if it is valid. The number of validations can be set either on the Control
Panel or using the laser scanner library. The following settings are available, using a combination
of 2-value and 4-value codes (default setting: 1).
Read count
In “Continuous Scanning” mode, scanning continues for the preset number of scanning times, and
then it will stop in standby state. The effective number can be set either on the Control Panel or
using the laser scanner library. The setting range is 1~9 times, and the default is 1 time.
Scanning period
The effective scan time after the trigger key is pressed can be set either on the Control Panel or
using the laser scanner library. After the preset time has elapsed, the scanner will go into standby
state automatically.
The setting range is 1~9s, and the default is 1s.
51
2.9.4 Scanning result output format
Formats for outputting results of scanned barcodes can be set.
52
Barcode symbology Standard No. of Output format Remarks
digits
Code39 3~50 SBBB・・・・・BBCS” A: Post-conversion ASCII data (with full ASCII
3~50 SAAA・・・・・AACS” conversion)
1~48 BBB・・・・・・BBC" B: Post-conversion ASCII data (without ASCII
1~48 AAA ------ AAC” conversion)
(*1) C: Check digit (mod 43)
Becomes data if there is no check digit
attached.
S: Start and stop characters
NW-7 3~52 SDDD・・・・・DDCS” S: Start and stop characters (any one of a, b, c,
1~50 DDD・・・・・・DDC" d)
(*1) D: Data
C: Check digit (mod 16)
Becomes data if there is no check digit
attached.
Interleaved 2 of 5 2~60 DDD・・・・・・DDDC" D: Data
(*1) C: Check digit (mod 10)
Becomes data if there is no check digit
attached.
Only even-numbered digits are scanned
Industrial 2 of 5 2~48 DDD・・・・・・DDDC" D: Data
(*1) C: Check digit (mod 10)
Becomes data if there is no check digit
attached.
Only even-numbered digits are scanned
Code93 1~60 AAA AAA” A: Post-conversion ASCII data B:
(*1) Pre-conversion ASCII data
C: Check digit (mod 47)
S: Start and stop characters
Code128 Code128 1~100 AAA AAA” A: Post-conversion ASCII data
1~100 AAA AAA” C: Check digit (mod 103)
EAN-128 1~100 FAAA AAA” S: Start and stop characters
1~100 GAAA AAA” F: Code ID (only “]C1” and EAN128)
(*2) 1~100 (* Note 4) G: GS (only 1Dh, EAN128)
1~100
(*1)
MSI 2~50 DDD・・・・・・DDCC" D: Data
(*1) C: Check digit (mod 10)
53
(2) Suffix settings
Select one of the following five termination codes to attach to the end of decoded data.
<CR> , <LF> , <CR>+<LF> , <TAB> , No termination code
Default setting: No termination code
- If the above settings are enabled, keyboard output is performed after speed is adjusted,
to reliably output correct data to the remote desktop connection destination. Therefore, it
may take more time to complete output than if this setting is disabled.
54
Save to memory method (output to OBR buffer)
When a bar code is scanned, its decoded data, including the barcode symbology and data size, are
stored in the OBR buffer, which is a data storage memory area in the driver. The saved data can be
retrieved by a function supplied from the library. This output method has the following features.
– It can capture the barcode symbology and data size information.
– It can capture the data at any user-set timing.
– The length of one data unit is up to 98 characters, and up to 9 labels can be saved.
Any new data scanned after data for 9 labels is already stored in the memory will be discarded.
Function Description
Notification by window A window message is issued to the specified window handle when
message scanning is complete. Also, the conditions for scanning completion
can be fetched by referring to wParam for the window message.
[Default settings] Notification by window message is enabled.
Notification by event An event with the required name is issued when scanning is
complete.
Also, the conditions for scanning completion can be fetched by a
function provided by the library. *1
[Remarks] Scanning will be terminated when any of the following conditions is met.
- Scan successful
- Timeout.
- OBR buffer overrun
- Module fault detection, etc.
55
(5) Setting unique specialized operation symbology
The terminal can be set to perform special actions when various barcode symbologies are scanned
and satisfy certain conditions. The code types, conditions, and operation content are as follows.
When barcode data 128 can be added to the ASCII value of the single
includes FNC4 data character that follows after FNC4, and the
result output as an extended ASCII character. If
two sequentialFNC4 function characters are
scanned, either a group of two sequential FNC4
function characters are read, or “128” is added
automatically to each subsequent ASCII character
data following the two FNC4 characters until the
end of the symbol.
When the lead character is The scanned barcode is recognized as a GS1-128
FNC1 (EAN128) code. The single data character that
follows after the lead FNC1 can be output as a
character GS(1DH).
When the character is The FNC1 character is not output.
FNC1
When the third or later The single data character that follows after FNC1
character is FNC1 can be output as a character GS(1DH).
*1 FNC2 for Code128 is an identifier that indicates linked barcodes. Even if a Code128 including
FNC2 is read, the scanner cannot output data as soon as it is read. After that, when a Code128
not including FNC2 is read, the data read up to that time is linked and output. The size of
combined symbol data is limited to 98 characters. If this is exceeded, the previous combined
symbol data that was scanned right before the exceeded combined symbol data are output.
*2 When using the trigger keys to scan barcodes which include FNC2,
Read one barcode with one scan operation on laser scanner models. The laser goes out after a
barcode is read, so scan each barcode individually. Finally, output the results after scanning a
barcode that does not include FNC2.
56
(6) Control characters conversion output
If the scanned barcode included a control character, that control character can be replaced with
another character, or it can be deleted, before output. The character that has not been replaced or
deleted yet can specify multiple arbitrary control characters. The character after replacement can
specify multiple arbitrary characters, other than control characters.
– In the above example, the control character 0x1D is replaced with ‘/’, and 0x0A is replaced with ‘@’
for output. The control characters 0x02 and 0x03 are deleted.
– If the same character is specified in the [ConvSrc] section and the [Delete] section, the delete
instruction has priority.
– If the number specified in the [ConvSrc] section is not present in [ConvDst], or in the reverse case,
the conversion is not performed.
57
Control character conversion example
The example of conversion after barcode data scanning is as shown below.
*1 Scan failure
Scanning will fail when one of the following occurs.
When a barcode with a number of digits outside the specified range is scanned
When a check digit calculation error occurs
Full ASCII conversion error occurs in scanning bar code of Code39 symbology or Code128
symbology.
58
*2 OBR buffer overrun
This means scanning takes place while data for 9 labels was already stored in memory in the
OBR buffer, when the “OBR buffer output” was the scanned data output method.
No deflection angle control Large deflection angle Medium deflection angle Small deflection angle
(No control on laser beam emission width) (Wide) (Standard) (Narrow)
* When either large deflection angle, medium deflection angle, or small deflection angle is set as
the control for laser emission width, and scanning is performed in a state that combines the
above setting with the Auto Gain setting for gain, scanning performance may be reduced,
depending on the barcode print quality. When either large deflection angle, medium deflection
angle, or small deflection angle is used as the setting, set “gain mode 0~3” as the gain setting.
Also, when Auto Gain is used as the setting, set “No deflection angle control” as the laser
emission width setting.
The emission width can be set using the laser scanner library. The default is “No control on laser
beam emission width”.
Setting values for laser emission width are stored in the area for system use, and are read out for
control when the system is reset.
Laser calibration *1 can be used to adjust setting values for laser emission width. The setting
values adjusted by laser calibration must be registered in the registry. If there is a registered
setting value in the registry, it will have priority.
*1 Laser - calibration
Each laser scanner module has an individual performance difference from others, causing
errors in laser emission width.
Perform calibration to compensate for this difference. A specialized barcode is used for
calibration.
59
(2) Laser focus
If scanning takes place with the laser beam emitted onto multiple bar codes located near each
other, it can be difficult for the user to distinguish which barcode was correctly scanned. In that
case, when the laser focus function is enabled, the scanned barcode is indicated by the laser
when barcode scanning is successful, and a notification is sent to the user saying which barcode
was scanned. The laser scanner library can be used to set “Enable” or “Disable” for laser focus.
This can also be set using Scanner Settings on the Control Panel.
The default is “Disable laser focus”.
[Remarks] The barcode scanner driver loads the configuration file when a reset is executed.
If no configuration file is available, the default settings are set.
60
2.9.7 Power control
Key operation is disabled during Virtual Off, so the laser/aimer does not light even if a trigger key is
pressed. Also, the trigger keys cannot be raised to turn the power on during virtual off.
61
2.10 Imager (1D/2D codes)
This section explains the specifications for scanning 1D and 2D barcodes.
Check Check
Scan No.
Code Character Character Remarks
of digits
(*2) output (*2)
Always Enable/
EAN8/JAN8 8 (+2/5) 2-digit/ 5-digit add-on
enabled disable
Always Enable/
EAN13/JAN13 13 (+2/5) 2-digit/ 5-digit add-on
enabled disable
Always Enable/ NS output
UPC-A 12 (+2/5)
enabled disable 2-digit/ 5-digit add-on
NS output
Always Enable/
UPC-E 6 (+2/5) 2-digit/ 5-digit add-on
enabled disable
UPC-A conversion
Enable/
1~22 Enable/ Start/stop bit output switch
Code39 disable
(0~48) disable Full ASCII conversion
2~26 Enable/ Enable/
Codabar (NW7) Start/stop bit output switch
(2~60) disable disable
4~42 Enable/ Enable/
Interleaved2of5 (ITF) -
(4~80) disable disable
1~35 Always Always
Code93 -
(0~80) enabled disabled
Code128/EAN128 1~28 Always Always
Code A/B
(Code A/B) (*2) (0~80) enabled disabled
Code128/EAN128 1~56 Always Always
Code C
(Code C) (*2) (0~80) enabled disabled
4~26 Always Enable/
MSI (Plessey) -
(4~48) enabled disable
RSS-14 (*3) Always Always
14 -
(Standard/Truncated) enabled disabled
Always Always
RSS Limited 14 -
enabled disabled
RSS Expanded 1~40 Always Always
-
(Standard) (1~80) enabled disabled
Always Always
ISBT (*1) 1~28 -
enabled disabled
Always Always
Code32 (*4) 9
enabled enabled
62
- Reading the number of scanned digits
Figures outside brackets are the numbers of readable digits. Figures inside brackets are numbers of
settable digits for the library and Control Panel. However, caution is required because the numbers
of readable digits are guideline figures, and the actual readable range depends on the error
correction level, the state of symbol printing (resolution, print density, thickness, etc.) and the
surrounding environment. Numbers of readable digits are strongly influenced by the module’s focal
length. Long-distance types have long depth of field, so it is possible to fit large symbols within the
angle of view, and the number of readable digits is larger.
Check
Scan Check
Code Character Remarks
No. of digits Character
output
1~2000 Always Always
PDF417
(0~2750) enabled disabled
1~366 Always Always
MicroPDF
(0~2750) enabled disabled
1~200 Always Always
Codablock F (*1)
(0~2048) enabled disabled
8~338 Always Always EAN8/EAN13
EAN8/13 Composite
(1~2435) enabled disabled + MicroPDF
2~338 Always Always RSS (1D)
RSS Composite (*3)
(1~2435) enabled disabled + MicroPDF
EAN128
UCC/EAN128 6~2361 Always Always
+ MicroPDF or
Composite (1~2435) enabled disabled
PDF417
RSS-14
Always Always
(Stacked type) (*2) 14
enabled disabled
(*3)
RSS Expanded 1~20 Always Always
(Stacked type) (*3) (1~80) enabled disabled
(*1) The Codablock F code has Code128 codes superimposed vertically. Therefore if Code128
code scanning is enabled, part of the Codablock F code may be scanned as Code128.
(*2) This includes the Standard Omnidirectional type.
(*3) The name of code RSS has been changed to “GS1 DataBar”.
[Addendum] The way of reading the scanned number of digits is the same as described for a 1D
code (barcode).
63
(3) 2D code (Matrix code)
Check
Scan Check
Code Character Remarks
No. of digits Character
output
1~2000 Always Always
Aztec
(1~3750) enabled disabled
1~1500 Always Always Model 2 only
QR Code (*1)
(1~3500) enabled disabled
1~35 Always Always
Micro QR Code
(1~3500) enabled disabled
1~138 Always Always
Maxicode
(1~150) enabled disabled
ECC000/050/080/
1~1000 Always Always
DataMatrix 100/140/200
(1~1,500) enabled disabled
Chinese Sensible
1~1000 Always Always
Code
(1~6000) enabled disabled
(HanXin Code)
[Addendum] The way of reading the scanned number of digits is the same as described for a 1D
code (barcode).
64
2.10.2 Scanning method
(1) Ordinary Read
This function reads one bar code at a time and outputs the data. Ordinary, this read method is used.
65
2.10.3 Scanning conditions
Conditions can be specified for scanning symbols.
66
2.10.4 Scan result notification
This function notifies when symbol scanning is complete.
Scan interrupted
Scan Scan
Notification device Configuration (Trigger key Remarks
successful failed
released)
Mode 1 On in On in red None Default
green
Indicator LED Mode 2 On in None None
green
Disabled None None None
Scan interrupted
Scan Scan
Notification device Configuration (Trigger key Remarks
successful failed
released)
Valid Sounds None None Default
Buzzer/ audio
Disabled None None None
Scan interrupted
Scan Scan
Configuration (Trigger key Remarks
successful failed
released)
Valid Vibrates None None Default
Vibrator
Disabled None None None
67
2.10.5 Expanded functions
Decode Customize Function
This function adjusts the scanning speed to facilitate scanning of hard-to-read symbols.
Decode
Deliberation Suitable Scan Mode/Bar Code Symbology Decode Speed
Levels
Very Quick 1D bar code with good print quality Very fast
Quick 1D bar code with poor print quality Fast
PDF417 bar code with 500 digits or less
Normal Package mode Normal (default)
PDF417, MicroPDF, Code49, Codablock F, Composite
Code, Aztec, QR Code, Maxicode, DataMatrix bar
codes with 1,000 digits or less.
Deliberate PDF417 bar code with 1,000 to 2,000 digits. Slow
TTLC39, GS1 DataBar Stacked, GS1 DataBar
Expanded Stacked, Aztec, QR Code, DataMatrix bar
codes with 80 digits or less.
Very PDF417 bar code with 2,000 digits or more Very slow
Deliberate TLC39, Aztec, QR Code bar codes with 80 digits or
more
68
(2) Print Weight Adjust Function
This function improves scanning bar codes comprised with thick or thin bars. The improvement can
be selected in seven grades. In ordinary condition, the setting is not required to change. However, it
is useful to change it if scanning a particular bar code is difficult.
ⅱ If mode1 and mode 2 are specified for the decode window, the decode range is determined
automatically so that only the symbols near the center are scanned.
ⅲ If user settings are specified for the decode window, specify the area around the center which
includes the coordinate center (416, 320). The decode range can be specified with coordinates.
When using the decode window to scan a symbol, the scan can only be performed when a part of
the symbol is contained within the decode window. In the figure below, symbol A cannot be scanned
because it lies completely outside of the decode window, but symbol B can be scanned because it
lies partially within the decode window.
Do not scan
A Scan
Decode range specified for decode window
(Determined automatically if mode 1/2 is
B specified)
Aimer
The position illuminated by the aimer is a guide. It may change due to the distance between the symbol
and the scanner, the angle, and other factors.
69
(4 ) Decode B/W reverse function
This function is for scanning symbols (B/W reverse symbols) printed in white on black, in contrast
to normal symbols.
B/W reverse symbols can be scanned when B/W reverse mode is specified.
[Remarks]
i When B/W reverse mode is specified, it disables scanning of normal non-reversed symbols, so
caution is required.
ii QR codes, DataMatrix codes, and Aztec codes can be read whether they are normal or B/W
reverse symbols, regardless of this setting.
[Remarks]
When scanning continuous symbols, set the decode mode to “Normal scan”. If continuous
symbols are scanned when the decode mode is set to “multistage scanning” or “batch scanning”, it
may not be possible to scan them correctly.
70
2.10.6 Basic Functions
(1) Imaging capture
This function captures image data. It outputs two-tone of 256-level grayscale as image data. When
used together with a JPEG library, it can save captured images as JPEG files. Resolution can be
lowered for output by downsampling the image.
At that stage, the image sizes are as follows.
The function automatically corrects the up and down positions of the captured symbol in
correspondence with the up and down positions of the image data even if it has been captured
upside down or diagonally, and then outputs it.
As described above, clip out the area at the position relative to the symbol center, and output it as
an image file.
71
The following four types of symbols are compatible with the sign clipping function.
(*1) The frame rate may vary due to brightness of the surroundings and the impact of system loads
(due to running programs etc.)
72
2.10.7 Common functions
(1) Illumination aimer
The imager device is equipped with an illumination LED and an aimer (either LED or laser) to
indicate the scan position. This software can vary their intensities and turn them on and off. When
scanning barcodes, the illumination and the aimer light alternately.
Aimer shape
The aimer shape is as follows.
73
2.11 Camera (stills and video photography)
There are functions for taking photos (stills) and video, as well as shooting assistance functions.
74
2.11.1 Basic Functions
The camera specification is as follows.
- Camera module
Item Spec Remarks
Effective pixels Approximately 5MP
Imaging device 1/4-inch backlit CMOS sensor
F stop F2.8
Focus adjustment Auto/ manual
Photographable range Approx. 5cm~∞
Color signal processing Gamma correction
functions Flickerless function (50Hz/60Hz)
Sharpness correction
Exposure control Auto Variable brightness
White balance control Automatic, fixed (outdoors, under
fluorescent light, under incandescent
light)
- Software functions
The camera drivers are compliant with Windows standard driver models (WDM). Therefore, the
camera functions are based on those defined for WDM. Application programs can use camera
functions by controlling DirectShow.
75
1/4VGA 240 320 320 240
1/9VGA 160 213 213 160
Frame rate 15fps or more When circumferential luminance
is 500lx or more
Zoom function Digital zoom
(In UXGA capture mode: x1.5)
(In Quad-VGA capture mode: x1.5/ x2.0)
(In XGA capture mode: x1.5/ x2.0)
(In SVGA capture mode: x1.5, x2.0, x3.0)
(In VGA capture mode: x1.5, x2.0, x3.0)
(In 1/4 VGA capture mode: x1.5, x2.0, x3.0)
Shutter sound Compulsory shutter sounding from audio
Video shooting File format: WMV
Name Normal With screen
rotated by OS
Width Height Width Height
VGA 480 640 640 480
1/4VGA 240 320 320 240
Item Parameters
Preview display screen size Name Normal With screen
rotated by OS
Width Height Width Height
VGA 480 640 640 480
4/9VGA 320 426 426 320
1/4VGA 240 320 320 240
1/9VGA 160 213 213 160
76
2.11.3 Still images capture and file saving functions
This function captures a single still image and then outputs it as a BMP or JPEG format file.
There is a time lag of approximately 400 milliseconds from the call to the still image capture function
until the image is actually captured. The camera driver uses the shutter sound to notify the operator
when the image has been captured.
77
- JPEG file options
The following options can be set if the JPEG format is specified as the output file format.
Item Parameters
Capturable image size Name Normal With screen
rotated by OS
Width Height Width Height
VGA 480 640 640 480
1/4VGA 240 320 320 240
Video codec WMV9
File extension WMV
Bit rate setting VBR (Variable Bit Rate)
Audio codec PCM
Frame rate 6~15fps
78
2.11.5 Photography modes and camera adjustment functions
There are the following photography modes and camera adjustment functions.
- Digital zoom function
This camera has a digital zoom function (used to cut out a part of image from the high-resolution
image). The following image sizes and magnifications can be used for digital zoom shooting.
If a picture is taken with one of the settings marked as “x” in the table, the data is captured without
digital zoom (“x 1.0”).
79
- LED light switch function
The LED light can be turned on and off. It can be used regardless of whether or not the camera is
in use. The intensity (brightness) cannot be switched.
- Focus adjustment
The CMOS camera built into the terminal is equipped with a focus adjustment function to enable the
operator to capture focused images.
This adjustment function comes in the form of a fixed-focus switch and an auto-focus feature.
The fixed-focus switch function enables the application program to switch the focus to suit the
distance to the object being captured.
The auto-focus function automatically adjusts the focus to suit the distance of the object being
captured. Executing the auto-focus function in preview mode automatically adjusts the lens position
to focus the camera. Auto-focus adjusts the preview screen’s fixed area (focus area) so that it
comes into focus. When the focus area and the focus frame display functions are enabled, a frame
known as the focus frame appears on the preview screen. The focus frame appears green when the
auto-focus has been successful. When the auto-focus function is not selected or when it is
unsuccessful, the focus frame turns to red. When capturing a still image upon successful auto-focus,
and when preview stops, the focus frame returns to red.
Autofocus may fail in extremely bright or dark places, and with low-contrast subjects. If autofocus
fails, use the fixed-focus switch function.
80
- Image rotation function
The image rotation method depend on the screen rotation setting for the OS.
Refer to the section on ”Camera Rotation” in the MSDN Library for the image rotation
specification.
81
- Video file adjustment function
The video file adjustment functions are as follows:
The parameters which can be set for video capture are as follows.
Table of settable parameters for the video file adjustment function
Item Setting parameters Remarks
Image quality Image quality = Low
(compression ratio) (compression ratio = High)
Image quality = Normal Default
(compression ratio =
Normal)
Image quality = High
(compression ratio = Low)
Image quality = Highest
(compression ratio =
Lowest)
Sound on/off Sound on
Sound off Default
82
2.12 NFC (Near Field Communication)
Communication with contactless IC cards and RFID tags makes it possible to read and write from
and to cards which follow their card standards.
ISO/IEC14443 TypeA
Card type Support command
MIFARE Standard 1K Authentication, Read, Write,
Increment, Decrement, Transfer,
Restore
MIFARE Ultralight Read, Write4
MIFARE Ultralight C Read, Write4, Authentication
ISO/IEC14443 TypeB
Card type Support command
JICSAP SELECT FILE, UPDATE BINARY,
READ BINARY,
FeliCa
Card type Support command
FeliCa, FeliCa Lite Read Without Encryption,
Write Without Encryption
ISO15693
Card type Support command
ICODE SLI Read Single Block, Write Single Block,
Lock Block, Read Multiple Blocks,
Write AFI, Lock AFI,
Write DSFID, Lock DSFID,
Get System Information,
Get Multiple block Security Status
ICODE SLI-L, ICODE SLI-S Read Single Block, Write Single Block,
Lock Block,
Write AFI, Lock AFI,
Write DSFID, Lock DSFID,
Get System Information
my-d V 10 Plain Read Single Block, Write Single Block,
Lock Block, Read Multiple Blocks,
Write AFI, Lock AFI,
Get Multiple block Security Status
83
Card type Support command
my-d Light Read Single Block, Write Single Block,
Write AFI, Lock AFI,
Tag-it HF-I Plus *1 Read Single Block, Write Single Block,
Lock Block, Read Multiple Blocks,
Write AFI,
Write DSFID,
Get System Information,
Get Multiple block Security Status
Tag-it HF-I Pro, Tag-it HF-I Standard*1 Read Single Block, Write Single Block,
Lock Block
*1 Write Single Block / Lock Block / Write AFI / Write DSFID to Tag-it Series tags
When using the command, you must perform the command retry process in the application.
For details, refer to the NFC Library Manual.
[Remarks] The IC card memory configuration and command specifications may differ depending on
the card being used.
For details, please refer to the individual specifications of each card.
84
2.12.2 Communication functions
Reading and writing of IC card data is performed by way of contactless communication between
an NFC module and an IC card. IC cards are preprogrammed to perform certain operations in
response to prescribed commands. When a command is correctly transmitted to an IC card, the
card responds to the received command by performing a corresponding operation. Once the
operation is complete, the card then transmits response information indicating the result of the
operation.
An explanation of the functions relating to this communication process is provided below.
* If there are multiple IC cards within the communicable range, it is not possible to start just one
of them, or all of them. It is necessary to bring each IC card into proximity one card at a time in
order to ensure proper communication.
85
functions successfully activated Timeout elapses
IC card
*1 A timeout occurs when the wait time from the transmission of a command by the NFC module
until receipt of a response from the IC card exceeds the above-mentioned 60 milliseconds.
Description
The NFC module consumes very little power while it is on.
In addition, turning the module on takes time, so if you would like to start communicating with an IC
card straight away, please be sure to open the device prior to activating the application. When
initiating communication with an IC card, start by performing card polling. When terminating the
application, please be sure to close the device.
86
2.12.3 Expanded functions
Radio wave auto stop timing notification
After successfully activating an IC card using the card polling function, the radio wave
transmission will stop automatically if a certain time elapses without any data communication
between the NFC module and the IC card. When this happens, it is possible to send a notification
to the user application of the time the radio wave transmission stopped, using either a window
message or an event.
This notification function can be enabled or disabled, and is disabled under the default setting.
*1 When card polling resumes after the power is turned back on, the timeout picks up from where it
ended in the card polling prior to turning the power off.
In addition, the elapsed card polling time is suspended while the terminal power is off.
*2 When the device power is turned off during data communication and operation is suspended, the
power supply to the IC card is interrupted so the card mode is reset.
Please resume card polling to restart communication in this mode.
87
2.13 USB
This section explains USB functions and specifications.
List of functions
¥Windows¥CradleMode.exe
Argument: 1 -> microA/B connector fixing
0 -> Standard
Execution example: CradleMode.exe 1
88
- Host/Device switching between the terminal’s microA/B connectors and the cradle
If the microA connector is attached by the connector contact point signal: Host
If the microB connector is attached: Switch to Device
Cradle
- Use the cradle’s switch to change to A and LAN: Host, B: Device.
89
USB-MODEM
– USB Communication Class (CDC:ACM) is supported.
– Virtual serial (COM) port is supported. Communication by modem can be established via this
port.
– Dial-up connection via USB modem can be enabled by selecting USB modem in the connection
settings under WindowsCE.
USB-LAN
This is compatible with the LAN Cradle.
Can connect to a network via the TCP/IP protocol using TCP/IP Wrapper Driver.
USB Storage
Supports USB Storage.
WAN interface
WAN models are equipped with the USB drivers provided by the manufacturers of their WAN
modules.
(5) OS popups
– If device recognition fails for some reason in Host operation, the OS displays a popup stating
“Device not recognized”.
– This popup does not disappear until OK is tapped, and it blocks re-recognition while it is still
displayed.
– There is a mode in which the “Device not recognized” popup is not displayed even when
recognition fails, to cover cases such as full-screen apps, when the user cannot tap OK.
90
2.13.2 LAN cradle IP setup
IP address information is written into the LAN cradle in advance, so LAN communication can use
an IP address linked to the LAN cradle.
Preparation
In the kitting phase, the IP address information is written into the LAN cradle.
The writing tool is installed on the handy terminal.
Set the handy terminal to “Use cradle IP”.
Operation
When the handy terminal is placed in the LAN cradle, and USB recognition is complete, it reads
the IP address information from the LAN cradle, and sets it as the handy terminal’s own IP
address.
Mask Input the desired subnet mask The input range for each octet is integers in
(must be input). the range 0~255.
If the value for each octet is written in binary,
input consecutive ones from the start.
Gateway Input the desired default gateway The input range for each octet is integers in
(may be omitted). the range 0~255.
[Attention]
Please don't operate the changeover switch in the lower left of a LAN cradle in the state which
loaded the terminal on a LAN cradle.A LAN cradle doesn't sometimes move right.
Therefore before loading the terminal on a LAN cradle, please change a changeover switch to the
"LAN" side.
91
2.14 Bluetooth
This section explains Bluetooth functions and specifications.
List of functions
IT-G500
Function
WEH6.5 Classic WEH6.5 Pro
Bluetooth Ver. 2.1 2.1
Master Yes Yes
Slave Yes Yes
Security/ encryption Yes Yes
EDR Yes Yes
Simultaneous connection to Yes Yes
multiple Bluetooth devices
Bluetooth headset phone call No Yes
AFH/FastConnection Yes Auto Yes Auto
Module PowerClass 2 2
[Reference]
The signal output varies according to the equipped Bluetooth module.
Class is defined as follows in the Bluetooth standard.
According to the Bluetooth standard, if the local device has a Class 1 module but the counterpart
devices have Class 2 or Class 3 modules, the signal output is automatically stepped down to the
counterpart device’s level.
92
2.14.1 Basic specifications
ⅰ Bluetooth initialization
When the Bluetooth tool is started or an initialization function is executed in the library, it will turn on
the power to the Bluetooth module and initialize the Bluetooth protocol stack. The time required for
initialization varies between models.
ⅴ Bluetooth connection
After the Bluetooth device to communicate with is selected, use the Bluetooth tool or execute a
connection function in the library, to make the Bluetooth connection. After the connection has been
established, communication via Bluetooth can be continued using the selected profile until the
Bluetooth connection is terminated.
93
(2) Communication procedures for each profile
In Bluetooth communication, there is the possibility of the communication link being cut off by the
radio wave environment. If that happens, run the retry process from the application to re-establish the
link. The retry process must be carried out because it is necessary not just for interference with
wireless LAN and Bluetooth, but also when there is interference with other devices, such as
microwave ovens using the ISM band.
ⅰ Serial profiles
Bluetooth connection can be managed using either the Bluetooth tool or the library, and actual
communication uses the COM port shown in 2.3.
(3) Security
This feature supports security functions regulated in the Bluetooth standard.
Bluetooth security is divided into authentication and encryption. Security is realized by using
PassKey (otherwise known as PIN code).
PassKey is a shared (common) authentication key used when forming a connection and trust
relationship (bonding) between Bluetooth devices. A maximum of 16 characters (in ASCII code) can
be used, but there may be limitations on the no. of digits and usable characters due to the
specifications of partner Bluetooth equipment. Also PassKey input must be completed within 30
seconds from a time when PassKey input request is generated.
Note that PassKey input is not required once “device trust” has been established with Bluetooth
equipment in a previous connection. However, the partner Bluetooth device must also have the trust
relationship in its memory.
Encryption is executed using a link key generated after PassKey exchange and a cipher key
generated from a 128-bit random number. Here, the partner Bluetooth equipment also must support
the encryption. PassKey exchange is required for Bluetooth connection when encryption is set
enabled.
94
(4) COM port list
The following are the COM ports used with Bluetooth.
ⅲ Default state
- The power is off in the default state after a full reset.
95
ⅴ Processing during a terminal suspend and resume
- On suspend: The module power turns off.
- On resume: The power state which preceded the suspend is restored.
96
2.15 WLAN
Wireless LAN control is achieved by wireless LAN communications in compliance with the
IEEE802.11 standard, and data communication functions are provided to higher-level applications.
[Caution]
- Ad hoc mode is supported functionally, but its operation is not guaranteed.
- If the 5GHz W53/W56 frequency band is used, turn the access point stealth setting off.
(If stealth is set, the access point cannot be found and no connection is possible).
97
(5) Terminology
Roaming
This function automatically switches access points in an environment where two or more access
points with identical SSID code exist.
Power saving
This saves power by automatically turning off power to the wireless circuit in the module in the
terminal when communication does not take place.
Ad hoc mode
This operation mode provides a direct communication between wireless equipment, without the
use of an access point.
Note, however, that the AdHoc mode is not recommended, because connection problems may
occur.
WEP
This is an encryption function that uses RC4 for safe communication.
40bit (64bit) and 104bit (128bit) are supported.
TKIP
Is used to encrypt the wireless LAN, it is one of the encryption scheme which has been adopted by
the WPA.
TKIP is supported to guard against WEP vulnerabilities.
AES
It is a new generation standard encryption scheme of the United States government.
AES can be used the encryption algorithm.
802.1x Security
This can strengthen authentication and establish a safe and reliable communication via wireless
LAN.
In general, this interlinks with TKIP.
It supports PEAP-EAP-MS-CHAP-V2, and EAP-TLS.
98
2.15.2 Casio expanded features
(1) Power saving
Perform IEEE802.11-compliant power saving operation. A function to turn power saving operation off
is provided, but there is no need to turn it off if there are no particular problems.
(2) Roaming
In an environment where there are two or more access points with identical SSID codes, the roaming
function automatically switches to the access point with the better radio wave environment.
Comparison factors
[1] Signal strength (RSSI value) is high
[2] Signal quality is good (compared if the values for
[1] are the same)
99
* The restriction on high-speed communication (11n) is offered as an option because 11n
communication has more cases than other models of failure to communicate correctly with certain
access points, due to compatibility problems.
However, speed reduction must be taken into consideration, and it is necessary to check the state
of speed reduction in the actual usage environment.
(Example 1) If Europe is selected in country-specific settings, 14ch will not be scanned even if 14ch
is selected here.
(Example 2) If 11bgn is selected in communication standard settings, these channels will not be
scanned even if the 5GHz band is selected.
The priority frequency band selection is set by frequency band (2.4GHz/ 5GHz) and valid range.
The valid range is the range of signal strength in which the priority selection is valid, in the form
(roaming threshold+N) dBm. This is intended to prevent excessive roaming operations when the
terminal connects to access points with inadequate signal strength because of the priority frequency
band selection.
Connection priority ranking for access points with the same SSID
[Caution]
(1) This function cannot guarantee that it is possible to connect to an access point in the priority
frequency band, due to access point detection conditions.
Example) When scanning for access point connection only detects access points in the
non-priority frequency band
(2) The priority frequency band selection only operates on the access point selection when making
a connection or using roaming.
Therefore, even if the environment satisfies the selection conditions after a connection is made,
the connection will not switch automatically. Switching requires action, such as cutting the
connection and reconnecting, or roaming.
100
(6) Multi SSID
The following method is available if it is necessary to connect to multiple different SSIDs.
i Manual switching
Prepare multiple configuration files (INI files), to switch the configuration file used on the
application site to match the SSID that is connected to.
Purpose of use
To move between multiple branches where each one has a different access point SSIS. In this
case, the SSID connected to before work is switched and used.
[Remarks] After switching the configuration file, the terminal must be reset to enable the settings.
ii Automatic switching
Up to 3 SSIDs can be registered in one configuration (INI) file, and the terminal automatic switches
to the best SSID to suit the access point search conditions.
Purpose of use
In this case, there are multiple access points with different SSIDs on the same site, and the one
to connect to is switched automatically due to movement.
Comparison
Method Connection speed Casio expanded/ Switching
TCPIP settings
[1] Manual High A different This is manual, and a reset
switching configuration can be is required for switching.
set up for each SSID.
[2] Automatic In some cases, this The same settings The process is automatic
switching process may take some must be made for all and no reset is required.
time, due to the SSIDs.
searched SSIDs and
the defined order of
SSIDs.
101
2.15.3 Wireless LAN settings
Settings can be made with standard MS tools, with the Casio wireless LAN setting tool, or with a
combination of both tools.
i As in the table above, if the Casio wireless LAN setting tool is used for setup, the registry
information set by the standard MS tool is overwritten on reset. Therefore, Casio settings have
priorities.
ii With Casio settings, the settings can be configured (and deleted) for individual setting units in the
table above. When a setting is deleted, the setting is deleted from the INI file, but it remains in
the registry.
ⅲ If Casio expanded settings are not made with Casio settings, the values currently set in the
registry are used. Normally, the default values initially set on the terminal are used, but once
Casio settings have been made as described above, the Casio settings retain their values in the
registry, so those settings are used.
Reference Refer to “3.9 Configure wireless LAN” about the setting tools.
102
Relationships between settings
The basic setting (SSID) can be set in multiple ways at the same time, but with Casio expanded
settings and TCPIP settings, all SSIDs have the same setting.
Basic settings Casio expanded TCPIP settings
(Standard MS or Casio (Casio settings) (Standard MS or Casio
settings)) settings))
SSID1
SSID2 Common Common
SSIDn
103
(1) Basic settings
Item Content Default
SSID Specify the SSID.
Text string (up to n characters)
ADHOC Specify whether to use ad hoc mode. Infrastructure
Infrastructure/ ad hoc
Security Specify the security system.
None/ WEP/ WPA/ WPA2
Authentication Specify the authentication method.
method Open
Shared
PSK
EAP-PEAP
EAP-TLS
EAP-MD5
Encryption method Specify the encryption method.
None/ WEP/ TKIP/ AES
WEP key index (*1) Set the index for the WEP key.
0~3
WEP key length (*1) Set the WEP key length.
64/128bit
WEP key (*1) Set the key to use for WEP authentication.
HEX text string
*WEP key length 64 bits: 20 characters
129 bit: 52 characters
PSK key (*2) Set the key to use when PSK authentication is
specified.
ASCII text string
EAP user name Set the user name to use if EAP-* is specified.
EAP password Set the password to use if EAP-PEAP or EAP-MD5 is
specified.
EAP domain name Set the domain name to use if EAP-PEAP is
specified.
EAP certificate Set the certificate to use if EAP-TLS is specified.
Network connection Specify Internet/ work.
destination (*3)
Stealth SSID (*4) Specify whether to use stealth setting with the SSID.
Stealth/ non-stealth
(*1) Setup is only required if security is WEP and the authentication method is open, shared, or
EAP-MD5.
(*2) Setup is only required if the authentication method is PSK.
(*3) Setting is only for handheld-type OSs.
(*4) This is as follows with MS standard and Casio settings.
- MS standard setup (WEC7): Automatic setup (non-stealth with a detected SSID, stealth
when SSID is added manually)
- MS standard setup (WEH6.5 Pro): Stealth/ non-stealth selectable
- Casio settings: Always set for stealth
104
- Relationships between security, authentication, and encryption methods
The settable combinations are as follows.
105
(2) Casio expanded settings
Item Content Default
Wireless LAN power Turn the power of the wireless LAN on or off. OFF
supply
Power saving Specify “Enable” or “Disable” for power Valid
saving.
Communication Specify the communication standard. 11abgn
standard 11b/g
11a
11a/b/g
11b/g/n
11a/n
11a/b/g/n
Roaming Specify “Enable” or “Disable” for roaming. Valid
Roaming threshold Set the roaming threshold value in dBm. -78
Value (-1~-200)
Scan channels Specify channels to scan with 11b/g. All channels
(11b/g) (Multiple selections allowed)
1~14ch
Scan channels (11a) Specify channels to scan with 11a. (Multiple All channels
selections allowed)
[W52] 36, 40, 44, 48ch
[W53] 52, 56, 60, 64ch
[W56] 100, 104, 108, 112, 116, 120, 124,
128, 132, 136, 140ch
Maximum scanning Set scan time per channel in milliseconds. 105
period Value (20~1000)
Set allowable period Specify the minimum time period after 15
to start roaming roaming that must elapse before roaming is
again allowed again.
Value (1~120)
Roaming signal Specify the signal strength difference for 1
strength difference which to perform roaming, in dBm.
Value (1~10)
Priority frequency Select the priority frequency band. No priority
band selection No priority/ 2.4GHz/ 5GHz
Valid range for Specify the valid range for priority frequency 0
priority frequency band selection, as a value relative to the
band selection roaming threshold value, in dBm.
Value (0~100)
Roaming signal Specify the signal strength difference for 1
strength difference which to perform roaming, in dBm.
Value (1~10)
Priority frequency Select the priority frequency band. No priority
band selection No priority/ 2.4GHz/ 5GHz
Valid range for Specify the valid range for priority frequency 0
priority frequency band selection, as a value relative to the
band selection roaming threshold value, in dBm.
Value (0~100)
106
(3) TCP/IP settings
Item Content Default
DHCP Specify “Enable” or “Disable” for DHCP. DHCP
IP address *1 Set the IP address.
Subnet mask *1 Set subnet mask.
Default gateway *1 Set the default gateway.
DNS1 Set primary DNS server address.
DNS2 Set secondary DNS server address.
WINS1 Set primary WINS server address.
WINS2 Set secondary WINS server address.
Storage location
Item Content When Reset Full User
shipped reset disk
clear
INI file This file is created when the Casio None Settings Settings When
wireless LAN setting tool is used for retained retained shipped
setup
Registry These are settings for the operation Default Settings When When
of the wireless LAN drivers and settings retained shipped shipped
*2
supplicants. This registry is set with only
the MS standard tool or the Casio
wireless LAN setting tool
E2PROM This is used for settings which must None Settings Settings Settings
be retained even through a user retained retained retained
disk clear, such as custom
country-specific settings.
*2 The registry reverts to shipped defaults, but on startup the settings are re-configured from the
INI file, so effectively the settings are retained.
Backup/restore
Item Own Other
terminal terminal
INI file Yes Yes
Registry Yes No *3
E2PROM Yes Yes
*3 The registry itself is copied, but the wireless LAN setting information is encrypted uniquely for
each terminal, so the information cannot be read. Therefore, information set with standard MS
configuration cannot be copied.
107
(5) Wireless LAN settings INI file
The wireless LAN settings INI file can be created with the wireless LAN setting tool.
* Operation cannot be guaranteed if it is edited with anything other than the setting tool.
File composition
Item Content Remarks
Storage folder ¥FlashDisk¥System Settings
File name WLANCFG.ini
108
2.16 WAN (voice calls/ data communications/ SMS)
These communications services are used on models equipped with WHE6.5 Pro.
Item Description
Call functions The standard Windows Embedded Handheld Professional dialer can
make voice calls.
Data Data communication is possible using a GPRS packet connection.
communications
SMS functions SMS (short messages) can be sent and received.
109
2.17 GPS
These communications services are used on models equipped with WHE6.5 Pro.
[A-GPS function]
This function links with cellphone base stations to perform GPS positioning processes. There are
the following 2 modes.
i MS-based
In this mode, the terminal gets data such as Ephemeris Data and Almanac Data from base
stations to perform positioning.
ii MS-assisted
In this mode, the base station performs positioning on the basis of GPS wave information
received by the terminal.
Also, there are the following two types of communication with cellphone base stations.
ⅰ C-Plane: The control signal channel of the cellphone is used for communication.
ⅱ U-Plane (SUPL): The IP address of the cellular network is used for communication.
A-GPS functions are supplementary to GPS functions, and cannot provide positioning where there
is no GPS wave reception.
110
3. Introduction
[Remarks]
However, everything must be reset in the event of a full reset of the terminal.
111
3.1.2 Date/Time/Alarm Setting
Select Start -> Settings -> Clock & Alarms.
Time Zone and Date/Time are set from the following screen.
[Time]Tab [Alarms]Tab
112
3.1.3 Owner Information
Select Start -> Settings -> Personal -> Owner Information.
Information about Owner is established from the following screen.
[Identification]Tab [Notes]Tab
113
3.1.4 Regional Settings
Select Start -> Settings -> System -> Regional Settings.
It's possible to establish it in detail by opening a tab of Region, Number, Currency, Time and Date.
[Region]Tab 【Number】Tab
Tab Explanation
Region A used language is chosen.
Number As the need arises, the form is changed.
[Currency]tab 【Time】tab
114
[Date]Tab
Tab Explanation
Currency As the need arises, the form is changed.
Time As the need arises, the form is changed.
Date As the need arises, the form is changed.
115
3.1.5 Power
Select Start -> Settings -> Power.
It's possible to establish an option of power management from the following screen.
[Battery]Tab [Advanced]Tab
Advanced On battery power When making a check box on, the following setting becomes
effective.
Turn off screen if device not used for
(1 minute, 2 minute, 3 minute, 4 minute, 5 minutes)
On external power When making a check box on, the following setting becomes
effective.
Turn off screen if device not used for
(1 minute, 2 minute, 5 minute, 10 minute, 15 minutes,
30minutes)
116
3.1.6 CPU Speed
Select Start -> Settings -> System -> CPU Speed.
Automatic Mode can change the movement speed of the CPU in case of invalidity (default:
Effective).
Item Explanation
TURBO The CPU operating frequency is established at high speed.
STANDARD The CPU operating frequency is usually established.
POWER SAVING The CPU operating frequency is established at low speed.
Automatic Mode Default is on (effective).
When it's invalidated, it can be chosen from
"TURBO,STANDARD,POWER SAVING".
117
3.1.7 Charge Setting
Select Start -> Settings -> System -> Charge Setting.
(1)Setting screen
Charging method can be set as an ecology charge. (Default :Normal)
Item Explanation
Normal Charging method can be set as an ecology charge. (Default: Normal)
Eco-Charge An ecology charge is performed.
[OK] Setting is preserved and this tool is ended.
(2)Message list
No Message
A reset is needed to make the setting effective.
1 Will you reset right now?
2 I failed in setting.
118
3.2 Input/Display Settings
Tab Explanation
General 1.Orientation
Select Portrait, Landscape(right-handed), Landscape(left-handed).
119
3.2.2 Vibrator Property
Select Start -> Settings -> System -> Vibrator.
Item Explanation
Vibrator When making the respective vibrators effective, a check box is turned on.
120
3.2.3 Buttons
Select Start -> Settings -> Personal -> Buttons.
Buttons is set from the following screen.
Up/Down Delay before first repeat The waiting time is set by a slider (Short, Long).
Control Repest rate Traverse speed is established by a slider (Slow,
Fast).
121
3.2.4 Backlight
Select Start -> Settings -> System -> Backlight.
The brightness of the backlight/automatic dimness/automatic off is established.
122
[Battery Brightness]Tab [External Brightn]Tab
123
3.3 Setting method of the volume
[Sounds]Tab [NOtifications]Tab
124
3.3.2 Buzzer
Select Start -> Settings -> System -> Buzzer.
"Of a buzzer, effective,/invalidity" is established from the following screen. "The volume
(Min,Mid,Max)" is established.
The buzzer sound can be confirmed by pressing a button of the item right side.
125
3.4 Security Settings
There are the following types of security.
126
3.4.1 Terminal Password Settings
Select Start -> Settings -> Lock.
From the dialog box below, set the password to input when the terminal starts up.
Password type Make a selection input from the following three types.
- Strong alphanumeric
- Simple PIN
- No Password
127
3.4.2 Encryption
Select Start -> Settings -> System -> Encryption.
If you want to Encryption files in the memory card, do the item check the following.
128
3.5 Laser Scanner (1D) Settings
This function only applies to models equipped with a laser scanner (1D).
Refer to Chapter 2, “2.9 Laser Scanner (Barcode)” for details of this function.
Tab Explanation
Read barcode Specify the 1D code to read.
Multiple symbologies can be specified.
Driver Mode This tab is to set up “Enable” or “Disable” for 1D symbologies, and to
specify options.
- No.of read digite(Min)
- No.of read digits(Max)
- Output format
- Check-digit
- Check-digit output
129
[ Read operation]Tab [Read operation 2]Tab
Tab Explanation
Read operation Specify the following scanner operations when reading codes.
- Continuous read or Single read
- Swing Angle Wide, Swing Angle Middle, or Swing Angle Narrow
(Note 1)
- Enable Laser Focus or Disable Laser Focus (Note 2)
- Output OBR buffer or Output Clipboard or Output Keyboard
- Disable termination code or Termination code CR, LF, CR, LF, TAB
- Selection of the decoding level, "Normal" or "High" or "Steady".
- Normal read or Gradation read (Note 3)
- With or without filter, or with hard filter/with soft (Note 4)
130
[Notification]Tab [Scanning Key]Tab
Tab Explanation
Notification This tab is specify one of the scanning notification methods listed
below.
- LED light up
- Buzzer sound
- Vibrator
Scanning Key This tab is to set up “Enable” or “Disable” for the following Trigger keys.
- Left Trigger (L Trigger key)
- Right Trigger (R Trigger key)
- [L] Key (Cursor Left key)
- [R] Key (Cursor Right key)
- [U] Key (Cursor Up key)
- [D] Key (Cursor Down key)
- Center Trigger (Center Trigger key)
- Trigger Grip
131
[Others]Tab [Version]Tab
Restore default setting This button resets setting contents and restores all the
Button settings to the default values.
Get logdata Button This button captures log information for both the scanner
and decoder units. The following are the log file names.
Scanner unit: “¥ObrLog.dat”
Decoder unit: “¥DecodeLog.dat”
Version This tab displays version information for the Laser Scanner
setting tool.
132
3.5.2 Laser Scanner Demo
This function only applies to models equipped with a laser scanner (1D).
This application demonstrates the following laser scanner scanning functions.
Select Start -> Laser Scanner Demo.
Demo function that can be selected from the menu screen, there are four.
Scan Barcode
After reading each code of 1D, code read, code type, I will show the number of digits.
When the user presses the trigger key, and then run the scan.
This mode reads specified number of bar code symbols at a time and then displays each scanned
bar code in the respective boxes in the following figure.
The number of symbols to continuously scan can be specified is either 2, 3 or 4.
133
Demonstrate Focus Feature
If you have enabled the focus function, it is the ability to appeal to what was read any bar code
from multiple bar code.
It scans continuously the same bar code, it displays the number of times the scan.
134
3.6 Imager (2D) Settings
This function only applies to models equipped with an imager (2D). Refer to Chapter 2, “2.10
Imager (1D/2D codes, postal codes)” for details of this function.
[1D]Tab [2D]Tab
135
[Option]Tab
136
[Decode]Tab
Item Explanation
Decode Window This field is to specify decode window mode by selecting one in the modes
listed below.
When you specify except Normal mode, decode range will be decided
automatically for only scanning symbol at center area
- Normal(Full Decode)
- Center Decode (1D/2D Codes)
- Center Decode (Composite)
Decode This field is to specify decode deliberation mode by selecting one in the
Deliberation modes listed below. If it is set up to “Very Quick” or “Quick”, the decoding
speed becomes fast though the number of symbols to be decoded is limited
instead. Or, if it is set up to “Deliberate” or “Very Deliberate”, the speed
becomes slow though the number of symbols to be decoded is increased.
- Very Quick
- Quick
- Normal
- Deliberate
- Very Deliberate
Print Weight This field is to set up the intensity in the range of 1 to 7 for target printed
symbol. Setting a value higher improves reading symbol printed in dark
color, or lower improves reading symbol printed in pale color.
Support Special This field is to set up scan special symbols which is contrast-reverse symbols
Symbols (printed white color in black color background).
(Contrast-Reverse
Symbols)
137
[Expasure/LED]Tab [Multi Step]Tab
138
[About]Tab
This tab displays current version information of the imager setting tool.
139
[System]Tab [IMGRead]Tab
Power up This checkbox is to set “Turning ON the terminal with the Trigger
device with key” effect.With a check mark in the checkbox, the power on the
trigger key terminal can be turned on when one of the Trigger keys is pressed
down.
IMGRead Timeout This field is to set up a time period for the Timeout to activate in
scanning operation.Scanning terminates either when the Trigger key is
released or when the time period in milliseconds set in this field elapses.
Add Suffix This field is to specify a suffix that is appended at the end of each
decoded data.
Indicator These two checkboxes are to set scanning completion notification
method with either LED or sound or both.
Notification method with a check mark in the checkbox will activate
when scanning a symbol is complete.
Output These two radio buttons are to specify an output method for
decoded bar code data selecting either one of the buttons.
140
3.6.2 Image Scanner Read
This function only applies to models equipped with an imager (2D).
Operating procedures
Select Start -> Programs -> Utilities -> Image Scanner Read.
3. Start scanning
Press the Trigger key to start scanning.
4. End scanning
Scanning will end when the Trigger key is released, or when the timeout time elapses.
The scanning result will be output to the application.
[Remarks]
i To exit the Image Scanner Read, click the icon in the task tray and then select Exit from the
menu.
ii Output to clipboard copies the scanning result data to the clipboard, to be pasted (with a
“Ctrl+v” keyboard event).
Therefore, scanning result data output is not possible with applications that do not support
paste operation.
iii Image Scanner Read cannot run at the same time as another application that uses the
scanner (such as Image Scanner Demo).
141
3.6.3 Image Scanner Demo
This application demonstrates the performances of reading 1D and 2D symbologies with the
integrated CMOS Imager (model dependant). The application consists of four menus;
- Single Decode
- Multi Decode
- Image Capture
- Sign Capture
Select Start -> Image Scanner Demo.
Scan Barcode
This mode reads a single bar code symbol every time one of the Trigger keys is pressed and then
displays scanned bar code, symbology name and the no. of digits. To exit this mode, tap Quit
button.
This mode reads specified number of bar code symbols at a time and then displays each scanned
bar code in the respective boxes in the following figure. The number of symbols to continuously
scan can be specified is either 2, 3 or 4.
142
Cature image
This mode captures an image through the CMOS Imager. Pressing the Trigger key first time
displays preview of image and then capture the image when the key is pressed second time to save
it in JPEG format in a storage area which is indicated at the lower part of the screen.
This mode reads bar code symbol and captures signature both located in the same vicinity and then
displays its result and captured signature on the screen.
143
3.7 Set NFC (Near Field Communication) Card Reading
NFC can be used to read the following card information:
- ISO/IEC14443 TypeA
- ISO/IEC14443 TypeB
- FeliCa
- ISO15693
* For function details, please refer to “2.12 NFC (Near Field Communication)”.
144
(2) Demo functions
The following four are available.
145
3.8 Set LAN
146
(2) Registration process
The procedure for registering IP information with this tool is as follows.
iii The tool acquires IP information from the LAN cradle, and displays an operation screen set with
the IP information. The default value is used if reading IP information fails.
iv Click the Set button after inputting setting information from the Tool screen.
v Check the setting information and, if there is no problem, write the IP information to the LAN
cradle.
vi If a number of units is specified from the Tool screen, the IP address auto increment *1 process
is applied. If the number of units is unspecified, nothing is displayed, and the system stands by
for operation.
[Caution]
If the switch at the lower left of the cradle is operated while there is a terminal unit placed in the LAN
cradle, the cradle may not operate normally. Therefore, move the switch to the LAN position before
placing the terminal unit in the LAN cradle.
147
(3) Message list
Some items have not been input. Input This is issued if there is any omission in the
1 the setting items. setting items.
Input the setting items.
An illegal value has been input for an This is issued if there is an input value outside
2 address. Input the setting item with a the range 0~255 among the settings. Input the
value of 0~255. setting items again correctly.
In illegal value has been input for a This is issued if a value has been input for subnet
3 subnet mask. Fix the setting. mask that does not match the specification. Input
subnet mask again.
An illegal value has been input for the This is issued if there is an input value outside
4 number of units. Input the setting item the range 1~254 for the number of units. Input
with a value of 1~254. the number of units again.
Writing information to LAN cradles. This is displayed when a polling operation is
5 performed for 15s during writing.
Cannot communicate with the LAN This is issued if no connection can be detected
6 cradle. Check the connection. between the HT and the LAN cradle for 15s. Fix
the connection with the LAN cradle.
Failed to write to the LAN cradle. Press This is issued if the set information could not be
7 the Set button again. written correctly to the LAN cradle. Press the Set
button again.
Cannot access the LAN cradle. Press This is issued if the IP information could not be
8 the Set button again. read from the LAN cradle. Press the Set button
again.
Finished all LAN cradle settings. This is displayed if the write process has been
9 performed for a many times as the set number of
units.
148
3.8.2 Connections
Select Start -> Settings -> Connections -> Connections.
Make settings for connections by dial-up and LAN.
(1)Setup screen
The following connection types can be created.
[Tasks]Tab [Advanced]Tab
(2)Advanced choices
[Select Networks] [Dialing Rules] [Exceptions]
149
Configuration example for performing packet communications
In the following procedure, set the network connection.
ⅱ From the following menu, the selection of the modem is set to "Cellular Line (GPRS)".
150
ⅲ In SIM card to be used in IT-G500, communication company will enter the Access point name
that you specify.
ⅳ From the menu below, I specify the "User name, Password, Domain".
151
3.9 WLAN Settings
Item Eexplanation
WLAN Power Check the checkbox enabled to supply the power to the integrated WLAN
module.
(Default: Power supply off)
152
3.9.2 WLAN Settings
Select Start -> Settings -> Connections -> WLAN Settings.
Go on to set up the WLAN connection.
* “WLAN Power” must be enabled first. Refer to “3.9.1 WLAN Power Settings”.
Tab Eexplanation
IP When this tool starts, it displays the settings stored in the “ini” file, if there is one,
or the default WLAN settings if not. The IP Setup tab is displayed at startup.
153
[Basic]Tab (Security:WPA) [Basic]Tab (Authentication:EAP-PEAP)
Item Eexplanation
SSID1 Press the Search button to display a list of SSIDs.
Security PSK, EAP-PEAP, or EAP-TLS authentication can be set for WPA.
The key is set for PSK.
Authentication If EAP-PEAP or EAP-TLS is selected, press the EAP Properties button to
make settings such as user name, and domain validate server.
[WLAN]Tab
[Band Priority]
- None
Do not specify the priority frequency band.
- 2.4GHz
Prioritize connection to 2.4 GHz. The valid range for
the threshold is specified as a relative value (dBm)
from the roaming start threshold.
- 5GHz
Prioritize connection to 2.4 GHz. The valid range for
the threshold is specified as a relative value (dBm)
from the roaming start threshold.
Tab Eexplanation
WLAN Make basic settings for WLAN configuration. These settings cover wireless power
supply, power save mode, WLAN standard, the roaming threshold level, and priority
frequency band.
154
[Detail Settings]Tab [Advance Settings]Button
[Version]Button
Tab Eexplanation
Detail Make other detailed settings. These settings can specify which application should
be used to display wireless settings and status. NetUI is the name of an MS tools
product. AdHoc connection, permission for non-recommended security settings, and
comments for the configuration file can also be set up.
[Advance Settings]
Make settings for wireless frequency channels and roaming operation.
[Version]
Displays the version of this tool.
155
Inifile Save Options
The following confirmation dialog is displayed after the user changes settings and presses the OK
button.
Specify whether or not to save the content set for each tab to the configuration file.
Operation Eexplanation
OK The terminal reboots and wireless functions operate with the set content.
Cancel Saving to the configuration file is performed according to the settings.
However, the terminal does not reboot, so the setting content is not
reflected until the next time the terminal is reset.
156
(2) Setup using the standard Microsoft tool
The Microsoft-standard Settings screen can be displayed using the following procedure.
ⅲ Since the SSID list is displayed on the wireless screen, after selecting the SSID name to the
connection object, and then press the [OK] button.
157
ⅳ And the detailed settings from the following screen, and then press the [Finish] button.
158
3.9.3 WLAN Barcode Setting Tool
Select Start -> Barcode Setting.
This tool performs WLAN setup by scanning a barcode.
This setting requires a barcode sheet prepared in advance for WLAN settings.
Refer to the WLAN Barcode Setting Tool Manual for details.
159
3.10 Bluetooth Connection
Select Start -> Settings -> Bluetooth.
The settings for connection with Bluetooth devices are made from the screen shown below.
160
3.11 Backup User Data
Backup and restore user data on the terminal. This function can be started from the tool or by a
command.
Note memory area change values, passwords, and stylus calibration information cannot be backed
up.
FlashDisk
¥FlashDisk¥Backup¥Backup.dat
161
- Backup procedure
Select Start -> Backup Tool.
The backup procedure is as follows:
i The save location is the backup destination, so choose it from the following options:
FlashDisk, SD card (if inserted)
iii The Password Input screen is displayed, so specify the password as required (may be omitted).
Press the Yes button to start backing up data to the selected save location.
CAUTION
For security purpose, a password can be input at the starting up the backup process.
Data cannot be restored until the correct password is input at the restore stage.
If the backup password is set, it disables automatic restoration with the automatic Backup Tool.
162
3. Backup Complete dialog
- Restore procedure
Select Start -> Backup Tool.
The restore procedure is as follows.
i The save location is the backup source, so choose it from the following options:
FlashDisk, SD card (if inserted)
163
3. Run Restore 4. Restore Complete
164
- Boot from command line
The boot method for using Backup Tool as a command is as follows:
Explanation of parameters
i Operation mode
B: Backup (target: Backup.dat)
R: Restore (target: Backup.dat)
S: Registry backup (target: Registry.dat)
W: Registry restore (target: Registry.dat)
ii Save folder
Backup file storage directory
[Caution]
① It may take between tens of seconds to a few minutes, depending on the amount of data to
back up or to restore.
① You are advised to use an external power supply while backing up your data.
165
Error message list
The following error messages are used with backup/restoration processes.
(1) On backup
(2) On restore
3 The main battery has almost run down. Before A lack of battery capacity prevented
continuing with the restore process, either replace the reading the backup file.
main battery or recharge the battery.
4 The password could not be confirmed. Be sure that The password input does not match
the password confirmation input exactly matches the to the password of the backup file.
password.
166
3.12 Duplicate a Terminal
Two terminals (parent unit, duplicate) can be connected via Bluetooth, and the content of one
terminal can be duplicated in the other.
Transmission content
Target Content
FlashDisk All files on the FlashDisk.
(1) To make the duplicate terminals an exact copy of the parent unit, the content of the child
terminals and the FlashDisk must be cleared prior to performing Copy Devices.
(2) Data on the SD card is not subject to copying, so it must be copied separately, on a PC etc.
(3) Applications can be set up on the duplicated terminal (duplicate) as desired, and modules can
be updated.
2 Ripple Copy In this mode, the data from the parent unit is received and copying is
finished, then the duplicate becomes the parent unit, and the data is
sent to other duplicates. Therefore the duplicate changes into parent
unit mode and can continue the Copy Devices process to other
duplicates.
167
Copy Devices procedure
The process flow and execution procedure is as follows.
Preparation
2. Start the Copy Devices Tool. 2. Select the following from the Menu screen.
1. Receiver Mode
3. Select the following from the Menu screen.
2. Sender Mode 3. Select either of the following from the
Selection screen.
4. For the group name, input the same name as 1. Normal Copy
on the receiver side. 2. Ripple Copy
Execute copy
6. Automatically search for the counterpart 6. Automatically search for the counterpart
terminal (the duplicate) and initiate a terminal (the parent unit) and initiate a
Bluetooth connection. Bluetooth connection.
7. Send all data on the parent unit: sender 7. Receive all data from the parent unit:sender to
FlashDisk to the duplicate: receiver. the duplicate:receiver FlashDisk.
8. Copy Devices finishes and the Exit button is 8. After the copy process ends, the operation is
displayed. different after the selection in 3 above.
- If “1.Normal Copy” was used
9. Press the Exit button to close the tool. Copy Devices finishes and the Exit button is
displayed.
168
Main screen
(1) Start the Copy Devices Tool
169
(2) Check the creation of backup data (parent unit side only)
The following dialog is displayed if no backup data exists for the parent unit side.
Yes: Go to the Group Name Input screen. Refer to “(4) Group name input”.
No: Return to the previous screen.
170
Receive screen
(1) Receiver Mode screen (duplicate side only)
The following Receive screen is displayed when the “1. Receiver Mode” button on the duplicate is
pressed.
First select which of the following modes to receive in.
Normal Copy: In this mode, the data from the parent unit is received and copying is finished,
then the tool closes.
Ripple Copy: In this mode, the data from the parent unit is received and copying is finished,
then the duplicate becomes the parent unit, and the data is sent to other duplicates.
Select the same mode on the parent unit (the terminal that operates in Sender mode) as well.
Communication proceeds even if different modes are selected on the parent unit and the duplicate,
but if both terminals are communicating in the same mode, it takes less time for communication to
start.
171
(2) Group name input
The following screen appears on both the parent unit and the duplicate. Input the same group
name to pair between terminals. Input any arbitrary group name (such as 1234) and press the Start
button to automatically search for counterpart terminals and connect with them (automatic pairing).
Now advance to the Standby screen.
172
(4) Run Copy Devices
The terminal automatic searched for counterpart terminals and connects with them (automatic
pairing), then the following Copy Process screen is displayed.
173
(5) Close Copy Devices
The message dialog is displayed after reception was completed in Normal Copy mode.
The terminal resets if you select "Yes”.
Transmission screen
(1) Send Mode screen
On the Send screen, first select which of the following modes to receive in.
Normal Copy: This send mode is suitable if the duplicate is operating in Normal Copy mode.
Ripple Copy: This send mode is suitable if the duplicate is operating in Ripple Copy mode.
174
(2) Group name input
On the Group Name Settings screen, specify the group name for communication with duplicates.
Specifying a group name starts communications with duplicates that have the same group name.
175
3.13 Automatically Install Software
[Remarks]
(1) ¥FlashDisk¥CE¥ARM¥Setup.exe is for system use, so do not use it as a user setup
application/
(2) The order of priority for auto install is for systems use -> for individual applications.
Setup.exe
FlashDisk CE ARM
*****.cab
2. Press the reset button on the back of the unit. Setup.exe starts when the system reboots, and
expands CAB files according to the installation procedure.
3. Once all CAB files have been installed, reset the unit again.
4. If there is any user setup application present, use the system setup.exe to perform the following
process.
After using reset to reboot the unit, start the user setup application
“¥FlashDisk¥CE¥¥ARM¥APP¥Setup.exe”.
176
3.14 Enable WAN (voice call/SMS)
This function is used on models equipped with WHE6.5 Pro.
The method for enabling telephone is as follows:
3.14.1 Phone
(1) Select Start -> Settings -> Personal -> Phone.
Press [Yes] if the following message is output.
(2) The following Settings screen will appear when phone is enabled.
177
3.14.2 Wireless Manager
(1) Select Start -> Settings -> Connections -> “Wireless Manager”.
The currently-enabled communications function status is displayed.
- Note
The following procedure can also be used to display the Wireless Manager.
(1) Tap the title bar (Top) to display the icon below.
178
3.15 Use the Country-Specific WLAN Setting Tool
Function
- Sets country-specific WLAN setting values on the terminal
- Reads the country-specific WLAN setting values that are set on the terminal, and displays them on
the screen
Subjects
The module configuration and compatible models are as shown below.
* The configuration module (exe) and configuration file (ini) comprise a set. The ini file is different in
each country, but the exe is common to all. The name of the configuration module (exe) without
the extension is the same as that of the configuration file (ini) without the extension.
Startup method
This tool starts in the following way: This tool may be placed in any folder, but the configuration
module (exe) and the configuration file (ini) must be in the same folder.
179
3.15.2 Configuration Files
The composition of the configuration file (ini file) is as follows:
[Country] section
Key Value
Code 11: USA
13: EU countries/Japan
14: Japan
99: Custom
(Anything other than the above causes an error)
[11bg] section
Key Value
1ch 0: Do not use
1: Use
(Anything other than the above causes an error)
2 ch (As above)
3 ch (As above)
4 ch (As above)
5 ch (As above)
6 ch (As above)
7 ch (As above)
8 ch (As above)
9 ch (As above)
10 ch (As above)
11 ch (As above)
12 ch (As above)
13 ch (As above)
14 ch (As above)
180
[11a] section
Key Value
36ch 0: Do not use
1: Use
(Anything other than the above causes an error)
40ch (As above)
44ch (As above)
48ch (As above)
52ch (As above)
56ch (As above)
60ch (As above)
64ch (As above)
100ch (As above)
104ch (As above)
108ch (As above)
112ch (As above)
116ch (As above)
120ch (As above)
124ch (As above)
128ch (As above)
132ch (As above)
136ch (As above)
140ch (As above)
[Remarks]
A line starting with “’” (single quote) is regarded as comment and not read.
The destination region is meant to be written as a comment, as a way to manage ini files.
181
- Setting example
Example 1 - For the USA: Just the country code.
[11bg]
1ch=1
2ch=1
3ch=1
4ch=1
5ch=1
6ch=1
7ch=1
8ch=1
9ch=1
10ch=1
11ch=1
12ch=1
13ch=0
14ch=0
[11a]
36ch=1
40ch=1
44ch=1
48ch=1
52ch=1
56ch=1
60ch=1
64ch=1
100ch=1
104ch=1
108ch=1
112ch=1
116ch=1
120ch=1
124ch=1
128ch=0
132ch=0
136ch=0
140ch=0
182
3.15.3 Command Line Argument
The command line arguments for this tool are as follows:
No argument
- Operation
Reads the configuration file (ini) and writes it to the non-volatile memory area of the terminal.
The screen displays whether reading succeeded or failed (described later).
- Reference
Manual start from Windows Explorer has no command line argument.
Silent /S
- Usage example
¥Temp¥SetCtryITG500.exe /S
- Operation
Reads the configuration file (ini) and writes it to the non-volatile memory area of the terminal.
The screen does not display whether reading succeeded or failed.
Success or failure can be judged from the termination status (described later).
If both /S and /D are specified, /D is ignored.
- Operation
Reads the settings from the non-volatile memory area of the terminal, and displays the content
on the screen.
The configuration file (ini) is not used (the content is displayed on the screen even if there is no
configuration file).
If both /S and /D are specified, /D is ignored.
183
3.15.4 Startup Screen
(1) Screen display when configuration was successful (USA/EU/Japan)
The following screen is displayed if configuration was successful (if the country setting is
USA/EU/Japan)
184
(3) Screen display when configuration failed
If configuration was unsuccessful, the details of the error are displayed in a message box.
The list of messages is described later.
(4) Screen display when reading was successful, with the /D option
(USA/EU/Japan)
The screen in (1) above is displayed, with ”Successfully finished” replaced by ”Current Settings”.
If the data is illegal, the display for “Country:” is “Undefined Code(xx)”.
xx indicates the set data.
(5) Screen display when reading was successful, with the /D option (custom)
The screen in (2) above is displayed, with ”Successfully finished” replaced by ”Current Settings”.
- Termination status
This tool sets termination status on termination. Termination status can be referred to if the
program was started from a kitting tool or from a batch file.
Termination status is 0 if configuration succeeded.
Termination status is an error number if configuration failed (see error numbers below).
185
4. Operation
・ Power is turned off by pressing the Power key on the unit while it is switched on.
Power key
Explanation
(1) In the following situations, restore operation by pressing any key, or by touching the screen.
- If power has been turned off by the power-saving control (sleep, auto power off, auto
backlight off)
- If the backlight is off
(2) To reboot the unit, press the Reset button on the back.
This operation may destroy data that is in use, and files that are being written to the FlashDisk
or card, so care is required.
Pressing the Reset button while the power is off boots the unit.
186
4.2 Input from the Software Input Panel (SIP)
This section explains how to input from the Software Input Panel (SIP).
[Note] Refer to “2.2 Key Control” about the keyboard key functions.
Input Panel
Numeric mode
[CAP] On
187
4.3 Use mobile camera
Select Start -> Pictures & Videos.
Still and video shooting, and do the playback of image files.
For detailed information on the features, please refer to the "2.11 camera (still images, motion
shooting)".
1.Startup screen
When you tap the "Camera" icon, and then the camera starts.
188
2. Still Image Capture screen
Button Configuration
LED flash Tap the LED Flash button to turn the LED off and on. The icon
changes.
(If LED illumination and LED flash are used at the same time,
LED flash is prioritized. Before image capture, the LED first
turns off, and then starts operating as LED flash).
Add GPS data Tap the Add GPS data button to change GPS data addition
between Select “Add” and “Don’t Add”. The current setting is
indicated by an icon, which changes to .
189
Item Function
Light mode Select the light mode from “Auto”, “Outdoor”, “Incandescent
light”, “Fluorescent light”, and “Dark”.
190
3. Video screen
Button Configuration
191
(2) Right side
Item Function
Photography Switches the photography mode between still and video.
mode The icon is when in still photography mode, and when in
video photography mode.
Advanced Make settings for the following details of capturing video action.
video 1. Image quality
shooting 2. Record time (Note 1)
settings 3. Sound
4. File format (in the current version, this is fixed as WMV).
5. Video size (in the current version, this is fixed as 1/4VGA).
Note If “No limit” is selected for record time, the valid range for elapsed time which displays the
capture time within the video is
“0~99 hours, 59 minutes 59 seconds”
192
4.4 Connection operation of the internet
193
4.5 Operating method of a PC connection utility
4.5.1 USB to PC
(1)USB connection to a PC
Select Start -> Settings -> Connections -> USB to PC.
A connection method with a PC is established from the following screen.
Item Eexplanation
Enable advanced network When doing a PC and a ActiveSync connection via I/O box, a
functionnality check box is turned on.
194
(2)USB connection
Select Start -> Settings -> System -> USB Connection.
The connection utility is changed from the following screen.
Item Eexplanation
Windows Mobile Device The setting which does USB juncture of this terminal and a PC is changed
Center for "Windows Mobile Device Center".
LMWIN The setting which does USB juncture of this terminal and a PC is changed
for "LMWIN".Default is set as "LMWIN".
195
4.5.3 FLCE
Select Start -> FLCE.
A file transfer is performed between LMWIN in the PC (utility) and the I/O box.
It's also possible to do a file transfer via a wireless LAN.
For details, please refer to" LMWIN manual".
(2)転送実行中表示画面
196
4.5.4 ActiveSync
Data communication is performed by linking with the ActiveSync client on the terminal.
It can be obtained from the following site.
http://www.microsoft.com/downloads/details.aspx?FamilyID=6b6ae681-5bf9-48af-b6f9-f3827074
1f6a&displaylang=ja
* Use Windows Mobile Device Center 6.1 or later. Earlier versions of WMDC cannot be connected
because they do not support Windows CE.
197
4.5.6 Remote Desktop Connection
Select Start -> Remote Desktop MObile.
This is a remote desktop client based on RDP7.0. Use the Microsoft remote desktop function to
remotely operate Windows machines that are using terminal services.
Input the connection name or IP address of the connection destination PC to connect to.
Input the user name and password for the connection destination.
When login is successful, the desktop of the connection destination computer is displayed.
198
Addendum: To use the unit scanner with remote desktop
The codes read by the unit scanner are sent to remote computers by embedded applications.
3. Start the Laser Scanner Read or Image Scanner Read application program.
4. Call Scanner Settings or Imager Settings from the icon in the task tray, then set the output
destination for scanning results to “Keyboard output”.
5. Start the remote desktop connection and set the keyboard to use to “Local computer” on the
Options screen.
199
4.6 Use Phone
- Tap and hold the arrow key ( ) for 1 second or more to clear the entire input number.
(3) Tap Talk ( ). The call is placed to the input number and can start when the called party
answers.
[Remarks]
(1) If the input phone number matches a number registered in Contacts, the name is displayed.
(2) If the phone number is input that does not match any number registered in Contacts or stored in
Call History, “No record” is displayed.
(3) The Phone screen can also be displayed by tapping the keypad, or the -> Today -> Phone
area twice (or once if it has already been selected).
200
The screen during a call
ii
iii /
ii Function
Function Description
Call History Displays information about recently-called parties.
Mute Makes your voice inaudible to the other party.
Hold Puts the call temporarily on hold. (Only if the “Call waiting” function is
enabled).
Add Call Calls a third party during a call.
Contacts Edits contacts and creates new contacts.
End Ends the call.
iii Keypad
Tap to display the keypad to input phone numbers.
iv Menu
Tap to put a call on hold, mute it, forward sound, display Contacts, create a memo, and display Call
History, Speed Dial, and Options.
[Remarks]
If there is no notification if the other party’s number for an incoming call, the Status Display area
displays “Private” (if set to anonymous or if the incoming call originates from a public phone) or
“Unknown” (if notification is not possible).
201
4.6.2 Receive a Call
(1) Tap “Answer” to take a call.
Slide “Answer” to the right end if the device is locked. Alternatively, tap “Unlock” to move to the
normal Call screen. Input the password, if a password has been set for the device lock, then tap
the
Lock icon ( ).
(1) After you tap End ( ), tap Menu -> Save to Contacts.
The Select Contact screen is displayed.
(3) The selection screen for the type of contact is displayed, so select “Outlook Contact”.
202
4.7 Operation of an application program
4.7.1 Calculator
Select Start -> Calculator.
It's possible to calculate an arithmetic operation (at most 10 digits) from the following calculator
program.
4.7.2 Notes
Select Start -> Notes.
When the following edit button is pressed, it'll be a handwritten input screen.
Edit button
203
4.7.3 E-mail
Select Start -> E-mail.
After choosing "Setup E-mail", it's possible to make a message.
Setup E-mail
Making of a message
204
4.7.4 Text Message
Select Start -> E-mail.
After choosing "Text Messages", it's possible to make a message.
[Messageing]
[Text Messages]
Menu button
205
5. Maintenance
5.1.1 TextEditor
Select Start -> Text.
From the following screen, you can create a text message.
5.1.2 FCHKCE
This utility checks a result of data upload/download. See the LMWIN Utility manual for detail.
206
5.1.3 File Explorer
Select Start -> File Explorer.
This application is a file management program.
It can copy files, transmit files, delete files, create folders and delete folders.
207
Menu Description
Edit
Undo Returns to the previous operation.
Cut Cuts the selected file and folder.
Copy Copies the selected file and folder.
Paste Pastes the file and folder that are cut or copied.
Paste Shortcut Creates a shortcut for the file and folder that are cut or copied.
Select All Chooses all the files and folders that are displayed.
208
5.2 The way to remove Micro SD card
(2)Micro SD card is removed from a SD card slot of the terminal in the state which doesn't suspend.
"File Explorer" then, it'll be the state that a "SD card" icon went off as follows.
Note : When using Micro SD card continuously, a SD card can be inserted in the state which did
terminal power supply on. When inserting a SD card in the suspension state, it can be used
after terminal power supply on.
209
5.3 Terminal Log Viewer
When a Set button is pressed, a log list is indicated (the following figure referring).
List screen
210
5.3.2 Storage Manager
Select Start -> Settings -> System -> Storage Manager.
Information on the respective Disks is indicated.
Item Eexplanation
Store Info Chosen Disk information is indicated.
211
5.4 Investigation of the communication environment
(1)Tool start
"File Explorer" is chosen from Start.
"rebind.exe" which is under the Windows folder is started.
(2)Reconnection result
A mark indicates communication possible.
212
5.4.2 NetSearch
Select Start -> NetSearch.
The following remote DTE detailed information is indicated.
・SSID
・WLAN standard
・Channel
・Intensity(%)
・Encryption
・MAC address
・IP address
・Physical address
Menu composition
Item Function
Disp
List View(1) Indication of a remote DTE list
Detail View(2) Indication of a remote DTE in-depth information display screen
Options Indication of a remote DTE search condition setting screen
About Address bar graph display change
Tool
Ping(4) Indication of a Ping utility screen
Signal(5) Indication of an electric field strong history indication screen
213
(1)Detail
"Detail" when a button (the screen lower right) is pressed, IPInformation is indicated.
(2)List View(1)
"List View (1)" when a button (the screen lower left) is pressed, a list screen of wireless LAN remote
DTE is indicated.
214
(3)Ping(4)
"Ping (4)" when a button is pressed, Ping Utility screen is indicated.
(4)Signal(5)
"Signal (5)" when a button is pressed, an electric field strong history indication screen is indicated.
(5)Disp - Options
When "Disp - Options" is chosen, a remote DTE search condition setting screen is indicated.
215
5.4.3 GPS Information
Select Start -> GPS Information.
GPS information is displayed.
This displays GPS information. Compatible models are those equipped with WHE6.5 Pro.
The power supply for the GPS unit is controlled in linkage with the telephone function. Therefore,
to use GPS information, check that the phone is turned on in the Wireless Manager tool.
The default setting is for the phone to be on.
If no GPS information is displayed for some time after the tool starts, wait around 1~5 minutes in a
well-exposed place outdoors to pick up satellite information.
Status display
216
No. Item Operation
1 Positioning Displays the subject of positioning. “GPS” is displayed if the power to the
quality GPS Module is on.
2 Selection “Auto” is displayed if the power to the GPS Module is on.
method
3 Positioning Indicates the reliability of the positioning data, as “3D”, “2D”, or
status “Unknown”.
The sequence is “3D” > “2D” > “Unknown”.
4 Reception Displays the satellite from which the signal was received, and result of
time time setting.
5 S/N ratio The satellite number is shown on the left while the signal strength of that
satellite’s signal is indicated in the bar.
The stronger the signal is, the further the bar is displayed towards the
right edge of the screen.
Position display
217
Version display
[Caution]
1. If this unit is turned off while the GPS Information screen is still displayed, the GPS unit will
consume more power than when the unit is turned off normally. To reduce the effect on battery life,
close the GPS Information screen before turning the unit off.
2. If any user app is installed that acquires GPS information, be sure to check that GPS is closed
when you turn this unit off.
218
A-GPS function setting
If your using SIM Card contract with telephone company is supported A-GPS function, you can set
A-GPS setting as below. (About setting detail, please follow telephone company indications.)
Setting detail
[GPS]
SettingEditor=1 <= Change this value from 0 to 1
The following setting tab menu will be appeared after execute GPS information program.
219
Item Description
No. Item Operation
Select A-GPS operation mode.
Stand alone : Without A-GPS
1 GPS Fix Mode
MS-Based : MS-Based mode
MS-Assisted : MS-Assisted mode
Select A-GPS execution method.
Control Plane : Control Plane mode
2 A-GPS Mode User Plane : User Plane mode
Note : When you select “MS-Based” or “MS-Assisted” in GPS
Fix Mode, this setting item will be appeared.
Specify URL or IP address for connection to Supl server.
Supl Server URL/ - When you select “User Plane” in A-GPS Mode, this setting is available.
3
IP Address - Available to set until 110 byte
- Error if no setting
Specify Port number for connection to Supl server
- When you select “User Plane” in A-GPS Mode, this setting is available.
4 Port - Available to set from 0 to 65535.
- Available to skip
- Error if value is out range.
Specify comment to write into ini file.
5 Inifile comment - Available to set until 100 byte.
- Available to skip
Display Accuracy value (Satellite receive threshold value of
GPS running) setting menu.
6 Advance Settings
- Specify decimal number over 0 (x => 0).
- Error if no setting or under 0 value.
7 Apply Setting value will be available.
8 Cancel Exit this program.
- [OK] button Exit this program.
220
5.5 Maintenance of a system
(1)Version
Start icon
An indication example
[Version] tab [Device ID]tab [Copyrights]tab
Tab Explanation
Version The OS version, Processor and Memory size are indicated.
221
(2)Memory
Start icon
An indication example
[Main]tab [Storage Card]tab
Tab Explanation
Main "Memory for data memory"," the respective percentages of the memory for
program execution "are indicated.
Storage Card When a memory card for memories exists, the total capacity is indicated.
222
5.5.2 Version information
Select Start -> Settings -> System -> Version Info.
Start icon
An indication example
Tab Explanation
CVersion System information on Casio is indicated.
The version indication by which it's for OS, Loader, Boot,Service Pack is
performed.
223
5.5.3 Remove Programs
Select Start -> Settings -> System -> Remove Programs.
This applet is used to display all programs installed in the terminal and delete them. To remove a
program, highlight the program in the field you want to remove, and tap Remove button.
Backup
The backup procedure is as follows:
1. Start restore.exe.
Run “¥Windows¥Restore.exe”.
2. Close restore.exe.
A closure message is displayed. Press the OK button to close restore.exe.
224
[backup]screen example
Restore
The restore procedure is as follows:
4. Set date/time
A screen for setting date and time will automatically appear. Set the correct date and time.
5. Run restore
Restore from the backed up data runs automatically.
6. Unit reset
The unit automatically resets approximately 5s after the restore process is complete.
Execution logs
The auto restore execution log is saved in “¥FlashDisk¥CE¥ARM¥Restore.log”.
[Remarks]
i A maximum of 30 logs combined are stored for backup and restore operations.
ii If the log file exceeds over 30 logs, records will be deleted, starting from the oldest.
Skipping restores
When the auto restoration is about to take place, pressing the 5 key on the terminal will output a
warning sound and skips the imminent restoration process.
225
5.5.5 Module Update Tool
This is a tool for building a mobile work system environment via network. It can efficiently update
user applications and data.
Target process
The terminal unit (HT) and PC server can be connected via network to perform the following
processes.
Terminal
Item Overview
HT PC
Synchronization of update configuration
Download of update Download of update configuration information
O O
configuration files from the server
Comparison of update Abstraction of differential information within
O O
configuration content update configuration files
Saving to reflect abstracted differential
Differential saving of update information
O O
configuration Nothing is done if no differential information is
abstracted
Synchronization of catalog information
Download of catalog Download of catalog information files from the
O O
information server, in line with update configuration
Abstraction of differential information within
Comparison of catalog
catalog information files (module addition/ O O
information content
update information)
Creation of update instruction files based on
Differential saving of catalog abstracted differential information
O O
information Nothing is done if no differential information is
abstracted
Module updates
Download of updatable modules from the
Module download O O
server, in line with the update instruction file
Updatable modules are placed on their
Module placement O O
targets, in line with the update instruction file
Updatable modules are executed (wait until
Module execution the completion of execution), in line with the O O
update instruction file
Updatable modules are deleted, in line with
Module deletion O O
the update instruction file
Save update information
Save update result Update results (module/ version/ update date)
O O
information are saved in the update results file
An update results log file is generated from
Upload update result
the update results file and uploaded to the O O
information
server.
226
Specification of the download connection method
There are the following seven methods for connecting to the download source. Select one and
make communications settings to acquire information from the download source.
Connection
No. Content
method
i HTTP Get the intended file from an HTTP folder made public on the server.
ii FTP Get the intended file from an FTP folder made public on the server.
iii File sharing Get the intended file from a public folder on a common network
iv FLINK(COM1) Get the intended file from a device connected to COM1
v FLINK(LAN) Get the intended file from a device connected via LAN.
vi FLINK(USB) Get the intended file from a device connected via USB
ii In the update confirmation dialog, select Yes for the displayed message.
227
3. Connection method 4. HTTP download (screen example)
iii Click on the dropdown box and select the construction method.
iv To download via HTTP, input the connection information and press the Start button.
After that, download the update configuration information files from the server.
v To download via FTP, input the connection information and press the Start button.
After that, download the update configuration information files from the server.
vi To download via folder sharing, input the connection information and press the Start button.
After that, download the update configuration information files from the server.
228
6. Appendix
(1)Start Menu
Reference
No Name Description
No.
3.1.1
1 Home Backgrounds of a home screen are set.
4.6.1
2 Phone Dialing is sent and it's called.
5.1.1
3 Text Creating a Text messages
4.7.3
4 E-mail An e-mail is established.
-
5 Contacts The phone number is made.
4.4.1
6 Internet Explorer A Web page of the internet and intranet is indicated.
-
7 Calendar A schedule is input.
-
8 Settings It will move to set folder.
-
9 Getting Started It displays the Microsoft's description.
-
12 Windows Media The music in the library plays the video.
-
13 Marketplace It's connected to Windows Marketplace for Mobile.
-
14 Messenger It's connected to Windows Live Messenger.
229
Reference
No Name Description
No.
4.7.1
18 Calculator Calculator software.
-
19 Games It's a game software.
-
20 Notes A handwriting memo is performed.
-
21 Tasks That it's expected to tasks, a memo is input.
5.1.3
22 File Explorer This is a file management program.
4.5.4
23 ActiveSync ActiveSync is a client software.
43 Remote Desktop Mobile The client software I do remote desktop juncture of. 4.5.6
230
Reference
No Name Description
No.
From SD card slot of the device, in a state in which it 5.2
44 Remove SD
does not suspend, remove the Micro SD card.
45 SimTkUI SimUI information is indicated. -
Reference
No Name Description
No.
3.10.1
1 Bluetooth POWER setting and a device are scanned.
3.1.2
2 Clock & Alarms The time and a time zone are set as the present date.
-
3 Home Backgrounds of a home screen are set.
3.3.1
6 Sounds & Notifications The kind of sounds and the volume are established.
-
7 Connections A screen moves to a connection folder.
Reference
No Name Description
No.
3.1.3
1 Buttons A program initiation button is established.
3.2.3
2 Owner information Information about an owner is established.
4.6.1
3 Phone Dialing is sent and it's called.
231
(4) Start-Settings-Connections Menu
Reference
No Name Description
No.
-
1 Beam A terminal makes reception of a beam mode effective.
-
2 Connections Make your Internet connection settings.
-
3 Domain Enroll Registration setting to the domain is performed.
-
4 Network cards A network adapter is established.
4.5.1
5 USB To PC A connection method with a PC is established.
3.14.2
6 Wireless Manager A terminal makes Bluetooth and the telephone invalid.
Reference
No Name Description
No.
-
1 About Version information on Windows is indicated.
-
5 Certificates Install This will import the trusted certificate.
3.1.7
6 Charge Setting Edit the trusted certificate.
3.1.6
7 CPU Speed The movement speed of the CPU is established.
-
10 Error Reporting A system does an error report of Microsoft product.
5.4.3
11 External GPS A system does the setting to acquire GPS data.
3.8.1
12 LAN Cradle IP information (terminal and cradle) is established.
232
Reference
No Name Description
No.
-
13 Managed programs Managed Program is managed.
5.5.1
14 Memory Core usage is indicated.
-
21 Task Manager The execution state of the application is indicated.
3.2.2
24 Vibrator Of a vibrator, it's effective and invalidity is established.
233
6.2 Optional Software List
The software, which can be used by adding installation, there are the following types.
Reference
No Name Explanation
No.
A CT client tool does wireless LAN
1 Wireless LAN measuring tool -
measurement.
2 Wireless LAN barcode setting tool This tool does WLAN setting by barcode scan. 3.10.3
5 WLAN country basis setting tool This tool establishes a wireless LAN by country. 3.15
234