The document shows force outputs for frame 1175 under different load combinations and at various stations along the frame. Forces are shown for three directions: P is longitudinal force in KN, V2 and V3 are transverse forces in KN. Loads combinations include dead load (DL), live load (LL), and earthquake loads in the X, Y directions (EQX, EQY). Forces are calculated at 0.5m intervals along the frame from 0 to 5.5m.
The document shows force outputs for frame 1175 under different load combinations and at various stations along the frame. Forces are shown for three directions: P is longitudinal force in KN, V2 and V3 are transverse forces in KN. Loads combinations include dead load (DL), live load (LL), and earthquake loads in the X, Y directions (EQX, EQY). Forces are calculated at 0.5m intervals along the frame from 0 to 5.5m.
The document shows force outputs for frame 1175 under different load combinations and at various stations along the frame. Forces are shown for three directions: P is longitudinal force in KN, V2 and V3 are transverse forces in KN. Loads combinations include dead load (DL), live load (LL), and earthquake loads in the X, Y directions (EQX, EQY). Forces are calculated at 0.5m intervals along the frame from 0 to 5.5m.