A hexagonal pyramid with a base side of 20mm and height of 40mm is resting on one of its triangular faces on the ground plane, with an edge of the base making a 45 degree angle to the vertical plane. Draw the projections of the pyramid with the apex closer to the vertical plane.
A right circular cone with a base diameter of 70mm, axis length of 65mm, and apex 25mm above the ground plane is resting on the vertical plane along one of its generators. The front view of the axis is inclined at 45 degrees to the horizontal plane. Draw the projections of the cone.
A hexagonal pyramid with a base side of 20mm and height of 40mm is resting on one of its triangular faces on the ground plane, with an edge of the base making a 45 degree angle to the vertical plane. Draw the projections of the pyramid with the apex closer to the vertical plane.
A right circular cone with a base diameter of 70mm, axis length of 65mm, and apex 25mm above the ground plane is resting on the vertical plane along one of its generators. The front view of the axis is inclined at 45 degrees to the horizontal plane. Draw the projections of the cone.
A hexagonal pyramid with a base side of 20mm and height of 40mm is resting on one of its triangular faces on the ground plane, with an edge of the base making a 45 degree angle to the vertical plane. Draw the projections of the pyramid with the apex closer to the vertical plane.
A right circular cone with a base diameter of 70mm, axis length of 65mm, and apex 25mm above the ground plane is resting on the vertical plane along one of its generators. The front view of the axis is inclined at 45 degrees to the horizontal plane. Draw the projections of the cone.
FE SEM – II (2023-2024) (R-19 C-Scheme) Sub – Engineering Graphics (Drawing book Assignments) Assignment No. 4 Projection of Solid Question CO BT Question No. Mapping LEVEL
A right hexagonal pyramid, side of base 20
mm and height of axis 40 mm is resting on one of its triangular face on the ground (HP) 1 and the edge of base contained by that CO2 2 triangular face makes and angle of 450 to the VP. Draw its projections considering the apex nearer to the VP.
A right circular cone of base diameter 70 mm
and axis length 65 mm is having its apex 25 2 mm above the HP and in the VP. Draw the CO2 2 projection when the solid resting on VP on one of its generators. Assume FV of axis is inclined at 450 to HP