Professional Documents
Culture Documents
Part B (5 M) Questions
S.N BT
QUESTION UNIT CO
O LEVEL
1 Draw an epicycloid, when the diameters of the rolling and the
directing circles are 50 mm. Suggest an alternative name for this I 2 CO1
curve.
2 Draw the projections of two points on the same reference line.
Point C being 15 mm below HP and 50 mm in front of VP and
point D being 25 mm above HP and 40 mm behind VP Point E is15 II 2 CO2
mm below HP and 20 mm behind VP.
Part B (5 M) Questions
S.N BT
QUESTION UNIT CO
O LEVEL
1 Construct a diagonal scale of 1:63360 to read miles,
furlongs and chains and long enough to measure up to
I 2 CO1
6 miles. Show a distance of 3 miles 4 furlongs 5
chains on it.
2 A line PQ is 70mm long and its end P is 20mm above
the HP. And 30 mm in front of the VP while its other
end Q is 40 mm above the HP. And 60 mm in front of II 2 CO2
the VP. Draw the projections of PQ and determine the
inclinations with the HP and the VP
3 A square prism having base with a 45mm side and
65mm long axis has its axis parallel to and 55mm in
front of the V.P. An edge of its base is parallel to the III 3 CO3
H.P. and inclined at 300 to the V.P. Draw its
projections.
Subject Code No: 22ES0ME02
GURU NANAK INSTITUTIONS TECHNICAL CAMPUS
(An UGC Autonomous Institution – Affiliated to JNTUH)
Ibrahimpatnam, Ranga Reddy (District) - 501 506.
Part B (5 M) Questions
S.N BT
QUESTION UNIT CO
O LEVEL
1 Draw the ellipse when the distance of its focus from
its directrix is equal to 60 mm and eccentricity is 3/5.
I 2 CO1
Also draw a tangent and a normal to the ellipse at a
point 100 mm away from the directrix.
2 A point C is 30mm below H.P and 20mm behind V.P,
another points D and E are 60mm above H.P and in
front of V.P, 90 mm below H.P and 45mm in front of
II 2 CO2
V.P respectively draw the projections of all points on
same reference line
Part B (5 M) Questions
S.N BT
QUESTION UNIT CO
O LEVEL
1 Construct an Ellipse when the distance of focus from
the directrix is equal to 60 mm and eccentricity is 2/3.
I 2 CO1
Draw a tangent and a normal to the curve at a
distance of an 80 mm from the directrix.
2 The end A of a line AB is in the H.P. and 25 mm
behind the V.P. The end B is in the VP and 50 mm
above the H.P. The distance between the end
II 2 CO2
projectors is 75 mm. Draw the projections of AB and
determined its true length, and inclination with the
two planes.
3 A cylinder of base 35 mm diameter and axis 40 mm
long is resting on a point of its base on HP so that the
axis is inclined at 300 with HP. draw the projections III 3 CO3
of the cylinder when the top view of the axis is
inclined at 450 with xy.
Subject Code No: 22ES0ME02
GURU NANAK INSTITUTIONS TECHNICAL CAMPUS
(An UGC Autonomous Institution – Affiliated to JNTUH)
Ibrahimpatnam, Ranga Reddy (District) - 501 506.