Professional Documents
Culture Documents
MFR Connection Diagram
MFR Connection Diagram
PROGRAMMING MODE
STATE LED
ORANGE : Master code is not entered.
BUZZER
PROG
G
1 2 3 RUN LED G
Microcontroller is off
LR
4 5V Microcontroller is off.
5 6
RELAY Microcontroller is on.(Active)
7 8 9 5V LED
Board supply is off
Board supply is on.
* 0 #
STATUS OF LEDS
COM
24V
NO
NC
LED OFF
F + - F
LED ON
LED IS FLASHING
RELAY CONTACT OUTPUTS BOARD SUPPLY
(max.250V 3A) 1000
24V DC
NO (Normally open contact) 100
NC (Normally close contact)
COM (Common)
EXAMPLE ENTER
PROCESS LIST PROCESS PROGRAM
D
CODE PROCESS PROCESS APPLICATION D
(Master code)
NO ACCESS
(MASTER CODE) #13#00#
#13# You can inhibit all access with #13#00# code
B
#15#0# OFF #15#1# On with undefined B
BUZZER WARNING #15# #15#3# ON #15#2# On with defined
#16#0# Using with card #16#1# Using with card and password
SYSTEM SELECTION #16# #16#2# Using with user code
SET ALL USER CODES #17#
#17# In programming mode, enter #17# to set all user codes to factory defaults.
TO FACTORY DEFAULTS This makes both 3 user codes to 0000 and system will warn you
DELETE ALL REGISTERED #18#
CARDS #18# for deleting all defined cards enter #18#
NOT: Don't use code #17# and #18# if not necessity F/7.5.5.02.45
A A
This document is a sample for applications. All information contained in MFS SECURITY SYSTEM
these materials are subject to change by Aybey Elektronik without notice. DRW. M. AKKUS
SERIES MFS
Aybey Elektronik assumes no responsibility for any damage, liability, or AYBEY
PROJ. 01 APPRV. M. AYBEY
other loss rising from these inaccuracies or errors. ELEKTRONİK
REV. 02 DATE 19 AUG 10
1 2 3 4