This document summarizes an inspection of a hand metal cutting machine. The inspection checked that the cutting wheel was not cracked and its RPM matched the machine, the cutting plate guard and double earthing were present, the plate and guard had a locking system, a job clamp was present and in good condition, the fiber body handle was also in good condition, the cable had no cuts or wear and had a three-pin industrial plug, a cutting dust guard was available, and only authorized personnel were allowed to operate it. Representatives from the contractor, its HSE, and the client signed off on the inspection.
This document summarizes an inspection of a hand metal cutting machine. The inspection checked that the cutting wheel was not cracked and its RPM matched the machine, the cutting plate guard and double earthing were present, the plate and guard had a locking system, a job clamp was present and in good condition, the fiber body handle was also in good condition, the cable had no cuts or wear and had a three-pin industrial plug, a cutting dust guard was available, and only authorized personnel were allowed to operate it. Representatives from the contractor, its HSE, and the client signed off on the inspection.
This document summarizes an inspection of a hand metal cutting machine. The inspection checked that the cutting wheel was not cracked and its RPM matched the machine, the cutting plate guard and double earthing were present, the plate and guard had a locking system, a job clamp was present and in good condition, the fiber body handle was also in good condition, the cable had no cuts or wear and had a three-pin industrial plug, a cutting dust guard was available, and only authorized personnel were allowed to operate it. Representatives from the contractor, its HSE, and the client signed off on the inspection.
Cutting wheel having any crack/ damage. And 1 cutting wheels’ expiry date & its RPM match with the machine RPM” has been checked. Presence of Cutting plate guard. Double earthing 2 has been provided in m/c to avoid shock. Presence of locking system for the plate & Guard 3 is available 4 Presence of job clamp and its conditions ok Presence of fiber body handle and its condition is 5 ok Cable condition(Any cut, wear etc.) and presence 6 of wire 03Pin Industrial top plug is ok 7 Presence of cutting dust guard is available