Professional Documents
Culture Documents
Hydro Crane Safety Checklist
Hydro Crane Safety Checklist
⑦
⑨ ④
①
② ⑧
⑥
Download HSE Docs hseprof.com
③ ⑤
T
No. Part item Inspection method M T W F Sa Su Inspection photo
h
Overload When overloaded, the operation
①
limiter will be stopped with alarm sound
Hydraulic
Hydraulic motor, cylinder, pipe should not
⑧ system and
be worn, damaged and leak fixing pin Hydraulic cylinder
cylinder
Inspector's
opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
Crawler Crane Safety Check List
⑤ ② ⑦
④
⑧ ⑥
Download HSE Docs hseprof.com
⑩
①
⑨
T
No. Part item Inspection method M T W F Sa Su Inspection photo
h
Overload When overloaded, the operation
①
limiter will be stopped with alarm sound
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
Lorry Crane Safety Check List
⑨ ① ⑧
③
⑦
②
⑩
Download HSE Docs hseprof.com
④ ⑤
T
No. Part item Inspection method M T W F Sa Su Inspection photo
h
Overload When overloaded, the operation will be
①
limiter stopped with alarm sound
Inspector's
opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
Fork Lift(High Lander) Safety Check List
⑨ ⑦
③
① ⑧ ②
⑥
④
Download HSE Docs hseprof.com
⑤
T
No. Part item Inspection method M T W F Sa Su Inspection photo
h
Rear view
Rear view camera should be on at all
① surveillance
times without any problem on monitor
camera
Rear mirror
Rear view mirror should properly attached
③ & alarm
and alarm device need to work normally
device
Hydraulic There shouldn't be any damage, worn-out
④ device and and leakage on hydraulic motor, cylinder, Alarm Hydraulic cylinder
cylinder pipe
Track, Wheel (tire) should not have any cracks
⑤
Wheel (tire) and has good connection condition
Extra weight should not be added and
Counter
⑥ connection status of fixing bolt & nut
weight Wheel (tyre) Weight
should be firm
Fork Fork should not have any deformation,
⑦ (Unloading cracks and fixing pin should be firmly
device) attached
Head
Head guard, back rest should properly
⑨ guard &
installed without any deformation
Backrest
other
Side footboard, limit switch for crash
⑩ safety Head guard Back rest
prevention should be well installed
devices
Inspector's
opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
High Platform(Scissor) Safety Check List
⑨
⑦
①
⑩
⑧ ⑤
② ③
Download HSE Docs hseprof.com
T
No. Part item Inspection method M T W F Sa Su Inspection photo
h
Emergency Power is cut when button is pressed and
①
stop button it should only be hand reset
Inspector's
opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
High Platform(Boom) Safety Check List
⑦ ⑥
①/②
⑧ ⑤
④
Download HSE Docs hseprof.com
T
No. Part item Inspection method M T W F Sa Su Inspection photo
h
Emergency Power is cut when button is pressed and
①
stop device it should only be hand reset
opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
Excavator Safety Check List
④
⑩
③ ①
②
⑦
⑨ ⑤
⑧
Download HSE Docs hseprof.com
⑥
T
No. Part item Inspection method M T W F Sa Su Inspection photo
h
Lever shouldn't have any deformation and
Safety
① when lever is pulled, all operation should
lever
be stopped
Rear view Rear view surveillance camera should be
② on at all times with no problems on Safety lever Rear view camera
surveillance
monitor
camera
Controller Controller, clutch and brakes should work
③
/ brake fine and seat belt needs to be attached
Slewing
Fixing bolt of slewing device should not
⑤ device
have abnormalities like loosened part
(Turn table)
Track or wheels (tire) should not have
Track &
⑥ any problems such as cracks, Turn table Travelling device
Wheel(Tire)
deformation or damage
Do not add extra weights and connection
Counter
⑦ status of fixing bolts and nuts should be
weight
fine
Use standard bucket, safety pin should
⑧ Bucket Counter weight safety pin
be properly installed
opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
Pile Driver Safety Check List
①
⑨
②
③
⑥ ⑧
Download HSE Docs hseprof.com
④ ⑤ ⑦
T
No. Part item Inspection method M T W F Sa Su Inspection photo
h
Over winding Before hook, hammer reach to highest
① proof point, operation should stop with alarm
device sounds
There should be no wire cut on wire rope
② Wire rope Over winding Wire rope
and end treatment should be good proof device
Height, perpendicularity, weight must be
Leader &
③ within instruction range and there
hammer
shouldn't have loosened bolt, deform
There shouldn't be any crack, damage
Leader and Track
④ Track and deformation on tracks with adequate hammer
amount of tension
Outrigger When moving, use steel plate to prevent
⑤ and steel ground from subsiding. Also use front jack
plate and outrigger
Connection status of generator should be Outrigger, steel plate Generator
⑥ Generator good (welding and bolts) without active
part being exposed
It shouldn't be arbitrarily manipulated and
Counter
⑦ firmly fixed. The weight should comply
weight
with instruction
Reverse rotation prevention device and
Backlash Counter weight Backlash device
⑧ brakes should work properly without any
device
problems
Assembly part and active part of main
Main
⑨ structure such as turntable and back stay
structures
should not have any abnormalities
Other Back stay
⑩ Install vertical life line to leader ladder Other safety device
safety
Inspector's
opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
Drill Machine Safety Check List
③
①
⑥
④
Download HSE Docs hseprof.com
⑤
②
T
No. Part item Inspection method M T W F Sa Su Inspection photo
h
Height, perpendicularity, weight should
Leader and
① comply with instructions. There shouldn't be
auger
any loosened, deformation of bolts
Check damage or deformation of track Leader and Track & steel
Track &
② and ground condition before moving. Use auger plate
steel plate
steel plate when needed
There should be no wire cut on wire rope
③ Wire rope
and end treatment should be good
Hydraulic There shouldn't be problems like leakage,
④ device/ damage or worn-out on hydraulic motor, Wire rope Hydraulic
cylinder cylinder, pipe device/cylinder
Main structure, assemble and active part
Main
⑤ should not have deformation and damages
structure
and working properly
Inspector's
opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
Dump Truck Safety Check List
② ⑦
③
④
⑥ ⑤
Download HSE Docs hseprof.com
T
No. Part item Inspection method M T W F Sa Su Inspection photo
h
Rear view surveillance camera should be
Rear view
① on at all times with no problems on
camera
monitor
Automatic cover
Inspector's
opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
Concrete Pump Car Safety Check List
①
②
Download HSE Docs hseprof.com
⑦ ⑥ ④
⑤
T
No. Part item Inspection method M T W F Sa Su Inspection photo
h
Controller Controller, clutch and brakes should work
①
& brake fine and seat belt needs to be attached
Rear view Rear view mirror should be properly
② mirror & attached and alarm device needs to work
Controller rear alarm
alarm normally
Hydraulic There shouldn't be problems like leakage,
③ device & damage or worn-out on hydraulic motor,
cylinder cylinder, pipe
Keep horizontal balance for maximum
④ Outrigger expansion and do not use more than two Hydraulic device Outrigger
batten
Wheel There shouldn't be any crack, deformation
⑤
(tire) and damage on wheels (tire)
Slewing
Fixing bolt of slewing device should have
⑥ device
abnormalities like loosened part Wheel (tire) Slewing device
(Turntable)
Main structure, assemble part, active part
Main
⑦ should not have any deformation and
structure
damages
Other safety
⑩ Side footboard should be installed well
device
Inspector's
opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
Motor Grader Safety Check List
T
No. Part item Inspection method M T W F Sa Su Inspection photo
h
Blade should not be arbitrarily
① Blade manipulated and not have deformation
and cracks
There shouldn't be cracks, deformation
Wheel Blade Wheel (tire)
② and damage of wheels and running
(Tire)
gear needs to be normal
Rear view Rear view surveillance cameras need to
③ surveillance be on at all times and a monitor should
camera operate without any problem
Controller & Control, clutch, brakes should work Rear view Controller
④ camera
Brakes properly with seat belts
Inspector's
opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
Loader Safety Check List
⑤
③
① ⑦ ④ ⑥ ⑧
②
Download HSE Docs hseprof.com
T
No. Part item Inspection method M T W F Sa Su Inspection photo
h
Use standardized bucket and connecting
① Bucket part and bucket itself should not have any
crack, deform and damage
Wheel (tire) should not have any cracks Bucket Wheel (tire)
Track,
② or deformation and has good connection
wheel (tire)
status
Rear view Rear view surveillance camera needs to
③ surveillance be on at all times and monitor shouldn't
camera have any problems
Controller Controller, clutch and brakes should work Rear view Controller
④ camera
& brake fine and seat belt needs to be attached
etc
Inspector's
opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
Roller Safety Check List
PJT site: Subcontractor: Register No.: Inspection date:
④
④ ③① ④
② ⑤
Download HSE Docs hseprof.com
T
No. Part item Inspection method M T W F Sa Su Inspection photo
h
Power is cut when button is pressed.
Emergency
① Button should be red and only
stop button
manual reset type
Rear view Rear view surveillance camera should
Emergency stop Rear view
② surveillance be on at all times with no problem on
button camera
camera monitor operation
Controller, clutch and brakes should
Controller,
③ work properly and seat belt needs to
Brakes
be attached
Rear mirror Rear view mirrors should be installed
Brakes Rear view mirror
④ & reverse properly and alarm needs to work
alarm normally
Hydraulic There shouldn't be problems like
⑤ device & leakage, damage or worn-out on
cylinder hydraulic motor, cylinder, pipe
Inspector's
opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager
Air Compressor Safety Check List
T
No. Part item Inspection method M T W F Sa Su Inspection photo
h
Power is cut when button is pressed.
Emergency
① Button should be red and only
stop button
manipulated by hand
It should be working properly without any
Pressure Emergency stop Pressure gauge
② damages, corrosion and accurately
gauge button
indicates numbers
It needs to be well-fixed without heat and
③ Motor
any cracks
opinion
Construction
Inspector (signature) (signature) Safety manager (signature)
manager