The document discusses technical graphics and limiting dimensions for end play. It provides equations for calculating total minimum endplay using allowance, which is defined as the minimum hole diameter minus the maximum shaft diameter. It also gives an equation for calculating total maximum endplay using the loosest fit, which is defined as the maximum hole diameter minus the minimum shaft diameter. The document includes lecture notes, solutions, and practice problems related to these concepts.
The document discusses technical graphics and limiting dimensions for end play. It provides equations for calculating total minimum endplay using allowance, which is defined as the minimum hole diameter minus the maximum shaft diameter. It also gives an equation for calculating total maximum endplay using the loosest fit, which is defined as the maximum hole diameter minus the minimum shaft diameter. The document includes lecture notes, solutions, and practice problems related to these concepts.
The document discusses technical graphics and limiting dimensions for end play. It provides equations for calculating total minimum endplay using allowance, which is defined as the minimum hole diameter minus the maximum shaft diameter. It also gives an equation for calculating total maximum endplay using the loosest fit, which is defined as the maximum hole diameter minus the minimum shaft diameter. The document includes lecture notes, solutions, and practice problems related to these concepts.
Lecture Notes Cw1.18a(2): Use the following equations Total Minimum Endplay = Allowance Allowance = Min Hole – Max Shaft Total Maximum Endplay = Loosest Fit Loosest Fit = Max Hole – Min Shaft