Professional Documents
Culture Documents
Value 19962 Red values are calculated values, so you need not distr
V Machine Speed MPM 1200
S Slice Open mm 16 Green Values are Machine speed, slice open and ef
J/V Eflux Ratio Fraction 1
values, so you need not distrub.
ne speed, slice open and efflux ratio can be changed as per requirement.
Notes: Efflux ratio in Cresent formers is very crucial factor. This influences formation and thu
Tissue paper. The calculator includes jet axis, section hight and contraction coefficient of the
Jet axis = 55 mm
bknvvrao@rediffmail.com
or. This influences formation and thus creepyness in
ight and contraction coefficient of the head box.
H=V^2*(j/v)^2/70608(1-(S/A*K)^2)-Y/10
H = Head (mm)
V = Required Jet Velocity. (m/min)
S = Slice Opening (mm)
A = Section Height. (mm)
K = Contration Coefficient
Y = Geodatic distance between Pressure Transmitor
and Jet axis. (mm )
J/V=Jet Wire Ratio or Efflux Ratio
H=V^2*(j/v)^2/70608(1-(S/A*K)^2)-Y/10
H = Head (mm)
V = Required Jet Velocity. (m/min)
S = Slice Opening (mm)
A = Section Height. (mm)
K = Contration Coefficient
Y = Geodatic distance between Pressure Transmitor
and Jet axis. (mm )
J/V=Jet Wire Ratio or Efflux Ratio
A Section Height mm 100
K Contraction
Coefficient Constant 0.85 Formula
Y Geodatic 19.96207682
distance Between
The Pres.tmr to
Jet Axis mm 55
8(1-(S/A*K)^2)-Y/1000
Pressure Transmitor
8(1-(S/A*K)^2)-Y/1000
Pressure Transmitor