Professional Documents
Culture Documents
SPECIFICATION
26 1068 FORGED BRASS FULL BORE GATE VALVE
1/ " to 2"
2
FEATURES
• BS 5154 PN20 Series B.
• Non-rising stem.
• Solid wedge.
• High quality PTFE packing. 1068
• Can be re-packed under pressure.
• BS 21 Taper Thread.
• ANSI (NPT) American Taper Thread (AT)
• ISO 228 Parallel Thread
• Lockshield option
RANGE
Sizes
Patt. No. 1/ " 3/ " 1" 11/4" 11/2" 2" 21/2" 3" 4"
2 4
1068 • • • • • • • • •
1068AT • • • • • • • • •
1068PT • • • • • • • •
1068LS • • • • • •
A Face to Face
B Height
52
85
56
95
65
110 125
73 76
145
90
170
102
205
114
240
134
290
MATERIAL SPECIFICATION
C H’wheel Diam. 60 60 70 75 95 105 120 155 155 No. Component Material
Weight kg 0.31 0.46 0.72 1.07 1.33 2.45 3.38 5.17 8.84
Forged Brass (1⁄4" to 2")
1 Body
Gravity Die Cast Brass (21⁄2" to 4")
Maximum Test
Size Pressure Conditions (psi) Pressures (psi) PRESSURE & TEMPERATURE RATINGS
Temperatures Temperatures
24
up to 212°F up to 356°F Shell Seat
1⁄ " to 4" 290.1 130.5 435.1 319.1
2
21
SUITABLE FOR
WORKING PRESSURE BAR
18
PRESSURE EQUIPMENT
6
DIRECTIVE CATEGORY 3
SATURATED STEAM
Sizes
1/ " 3/ " 1" 11/4" 11/2" 2" 21/2" 3" 4" -10 0 20 40 60 80 100 120 140 160 180 200
2 4
SEP SEP SEP SEP SEP SEP SEP SEP SEP TEMPERATURE °C
PREVIOUS APPROVAL
COUNTRY OF ORIGIN
CERTIFICATES
Forged brass full way gate valve
Maximum Hot
Minimum Operating Maximum Cold Working
Description Working Pressure
Pressure (bar) Pressure (bar)
(bar)
17.5 bar at
1065 Gate No Minimum 17.5 bar at temperatures
temperatures up to
valve Operating Pressure down to -10˚C
93˚C
Care
No regular aesthetic care is required for this product
Maintenance
A regular maintenance program is the most efficient method of ensuring longer term operational efficiency of
the selected valve. Such a program would need to include a risk assessment and a planned procedure of
how the maintenance will be carried out. The possibility of operational limits being exceeded and the
potential hazards ensuring must be considered as part of this assessment. This should be implemented to
include visual checks on the valve’s condition and any development of unforeseen conditions, which could
lead to failure. The correct fitting tools and equipment should be used for valve maintenance work. Separate
means of draining the pipe work must be provided when carrying out any maintenance to valves. Where
there may be any system debris this could be collected and /or filtered by installation of the appropriate
protective device.
If your product is under warranty please contact the Service Support Team on: 0800 1560050
Regulations
Regulations
THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC and CE MARKING
The Pressure Equipment Regulations 1999 (SI 1999/2001) have now been introduced into United Kingdom
law.
Valves with a maximum allowable pressure greater than 0.5 bar are covered by these new Regulations.
Valves are categorised according to their maximum working pressure, size and rising level of hazard. The
level of hazard varies according to the fluid being carried. Fluids are classified as Group 1, dangerous fluids
or Group 2, all other fluids including steam. The Categories designated are SEP (sound engineering
practice). Valves up to and including 25mm (1”) are designated SEP regardless of the fluid group. Those
identified as having increased hazard are Categorised as, I, II, III or IV. All valves designated as SEP do not
bear the CE mark nor require a Declaration of Conformity. Categories I, II, III or IV carry the CE mark and
require a Declaration of Conformity. Valves classified from the piping chart would not be included in Category
IV.
Materials
Component Material
Body Forged Brass
Bonnet Forged Brass
Stem Brass Bar
Wedge Forged Brass
Gland Screw Brass Bar
Handwheel Aluminium
Handwheel Nut Brass Bar
O Rings Nitrile Rubber
Rating Disc Aluminium
Technical Suitability
Steam Water Oil Air Gas Inert Gas Combustible† Gas Corrosive†† Gas Oxygen
no yes yes no no no no no
Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF
Telephone: Phone +44 (0) 844 243 4400 Fax: +44 (0) 844 243 9870 Website: www.pegleryorkshire.co.uk
Registered office : Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507
This certifies that
The certificate by itself is not evidence of a valid WRAS Approval. Confirmation of the current
status of an approval must be obtained from the WRAS Directory (www.wras.co.uk/directory)
February 2026
2102800
Certificate No.
June 2017
TRADE LICENSE/
COMPANY PROFILE
رخصة تجارية
Commercial License
License Details / تفاصيل الرخصة
License No. 237374 رقم الرخصة
Legal Type Limited Liability Company)LLC( ذات مسئولية محدودة الشكل القانونى
Expiry Date 06/12/2023 تاريخ النتهاء Issue Date 07/12/1982 تاريخ الصدار
D&B D-U-N-S ® 561606844 الرقم العالمي Main License No. 237374 رقم الرخصة الم
No.
Register No. 44596 رقم السجل التجارى DCCI No. 34132 عضوية الغرفة
Print Date 22/12/2022 11:31 تاريخ الطباعة Receipt No. 0 رقم اليصال
اتصالت) للحصول/ (دو6969 أرسل رقم الرخصة إلى،يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة
.على اذن الدفع Get FREE access to
Zoho One for the first
Now you can renew your trade license by sending a text message )SMS(. Send your trade year
license number to 6969 )Du/ Etisalat( to receive payment voucher. . احصل على زوهو ون مجانا
للسنة الولى
Zoho.com/det
لمراجعة صحة البيانات الواردة في الرخصة يرجي مسح رمزالستجابة السريعة. وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة القتصاد والسياحة في دبي
this is a certified e-document issued without signature by the department of Economy and Tourism .Kindly Scan the QR Code to
Verify the certificate