The preventive maintenance routine outlines daily, 3-month or 500 hour, 6-month or 1000 hour, and yearly or 2000 hour checks. Daily checks include monitoring hydraulic pressures and fluids, greasing components, cleaning chips and covers. Every 3 months or 500 hours the chip conveyor chain is greased and coolant filters checked and cleaned. A more thorough cleaning is outlined for 6 months or 1000 hours, including draining and cleaning tanks, filters, radiators, and lubrication units. Yearly checks at 2000 hours inspect key components like the headstock, spindle, chuck cylinder, and tailstock for wear and adjust positioning as needed.
The preventive maintenance routine outlines daily, 3-month or 500 hour, 6-month or 1000 hour, and yearly or 2000 hour checks. Daily checks include monitoring hydraulic pressures and fluids, greasing components, cleaning chips and covers. Every 3 months or 500 hours the chip conveyor chain is greased and coolant filters checked and cleaned. A more thorough cleaning is outlined for 6 months or 1000 hours, including draining and cleaning tanks, filters, radiators, and lubrication units. Yearly checks at 2000 hours inspect key components like the headstock, spindle, chuck cylinder, and tailstock for wear and adjust positioning as needed.
The preventive maintenance routine outlines daily, 3-month or 500 hour, 6-month or 1000 hour, and yearly or 2000 hour checks. Daily checks include monitoring hydraulic pressures and fluids, greasing components, cleaning chips and covers. Every 3 months or 500 hours the chip conveyor chain is greased and coolant filters checked and cleaned. A more thorough cleaning is outlined for 6 months or 1000 hours, including draining and cleaning tanks, filters, radiators, and lubrication units. Yearly checks at 2000 hours inspect key components like the headstock, spindle, chuck cylinder, and tailstock for wear and adjust positioning as needed.
Check hydraulic pressure and ensure it remains at 4.5 MPa
Check hydraulic fluids Check grease and chuck pressure Check lube level and ensure it’s at the right operating level Clean out chips Clean the window of the door Wipe down stainless steel covers and lubricate using hydraulic oil
2. 3-month or 500 hours
Check the chain on the chip conveyor and grease it
Check, clean or replace the filters on the coolant tank
3. 6 months or 1000 hours
Clean the coolant tank
Remove and clean chuck and jaws Drain and clean the hydraulic tank and replace the hydraulic oil Change the line and suction filters Clean the radiator and straighten radiator fins Drain and clean lubrication unit and add fresh lube Drain, clean, refill cooling unit Check and adjust your machine leveling Inspect, clean, and replace wipers
4. Yearly check or 2000 hours
Check headstock for taper
Check spindle for radial and end play Check chuck cylinder for run out Check tailstock for taper Check the turret parallelism and inclination Run backlash program to check the backlash in the X and Z axis Check and adjust the X and Z axis gibs