Professional Documents
Culture Documents
1 Pipa Galvanis
- Merk : Spindo
- Type : Galvanis SNI Medium
- Diameter : Ø 1 Inchi, Ø 1,5 Inchi dan Ø 4 Inchi,
2 Pipa Screen
- Type : Low Carbon
- Diameter : Ø 4 Inchi,
3 Pompa Submersible
- Merk : Grundfos
- Model/Type : SP 5A - 21
- Total Head : 85
- Power Pompa : 3 PK
Fitri Rokhmah
Direktur
Company name:
Created by:
Phone:
Date: 28/01/2020
Qty. Description
1 SP 5A-21
Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally. All steel
components are made in stainless steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump
carries drinking water approval.
The pump is fitted with a 2.2 kW MS402 motor with sand shield, lip seal, water-lubricated journal bearings and a
volume compensating diaphragm. The motor is a canned type submersible motor offering good mechanical
stability and high efficiency. Suitable for temperatures up to 40 °C.
The motor is not fitted with a temperature sensor. If temperature monitoring is desired, a Pt1000 sensor can be
fitted.
The motor is for direct-on-line starting (DOL).
Pump
All pump surfaces that are in contact with pumped liquids are made in stainless steel which makes them corrosion-
and wear-resistant. The corrosion diagram below shows the capabilities of the pump and motor in relation to the
temperature in Celsius (y-axis) and the concentration of chloride in ppm (x-axis).
Date: 28/01/2020
The elastomer parts in the pump are made of NBR (Nitrile-Butadiene Rubber) and TPU (Thermoplastic Poly-Urethane) which
offers good wear resistance and long service intervals.
The suction interconnector is fitted with a strainer to prevent large particles from entering the pump. The suction
interconnector is designed to comply with NEMA standards for motor mounting/dimensions.
Motor
The stator is hermetically encapsulated in stainless steel and the windings are embedded in polymer compound.
This results in high mechanical stability, optimum cooling and reduces the risk of short circuits in the windings.
The shaft seal is of the lip seal type characterised by low friction against the rotor shaft. The NBR elastomer offers
good wear resistance, good elasticity and resistance to particles. The rubber material is approved for use in
potable water.
The motor can be fitted with a Pt100 or Pt1000 sensor that together with a control unit ensures that the maximum
operating temperature conditions are not exceeded.
Liquid:
Pumped liquid: Water
Maximum liquid temperature: 40 °C
Max liquid t at 0.15 m/sec: 40 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Technical:
Pump speed on which pump data are based: 2900 rpm
Actual calculated flow: 5.002 m³/h
Resulting head of the pump: 85.07 m
Shaft seal for motor: LIPSEAL
Approvals on nameplate: CE,EAC
Curve tolerance: ISO9906:2012 3B
Motor version: T40
Specification for shaft end: SPLINE
Materials:
Pump: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Motor: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Pump outlet: Rp1 1/2
Motor diameter: 4 inch
Date: 28/01/2020
Qty. Description
Electrical data:
Motor type: MS402
Rated power - P2: 2.2 kW
Power (P2) required by pump: 2.2 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 5.50-5.50-5.70 A
Starting current: 440-460-470 %
Cos phi - power factor: 0.85-0.82-0.77
Rated speed: 2850-2860-2870 rpm
Start. method: direct-on-line
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): B
Built-in temp. transmitter: no
Motor No: 79192007
Others:
Minimum efficiency index, MEI ≥: 0.50
ErP status: EuP Standalone/Prod.
Net weight: 18.7 kg
Gross weight: 20.1 kg
Shipping volume: 16.3 m³
Danish VVS No.: 388315210
Swedish RSK No.: 5852973
Finnish LVI No.: 4762677
Norwegian NRF no.: 9040876
Date: 28/01/2020
On request SP 5A-21 50 Hz
H SP 5A-21, 3*400 V, 50Hz eta
[m] [%]
Q = 5.002 m³/h
H = 85.07 m
Es = 0.5113 kWh/m³
n = 2885 rpm
Pumped liquid = Water
Liquid temperature during operation = 20 °C
140 Density = 998.2 kg/m³
130
120
110
100 100
90 90
80 80
70 70
60 60
50 50
40 40
30 30
20 20
10 10
Eta pump = 59.3 %
Eta pump+motor = 45.2 %
0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Q [m³/h]
P
[kW]
3.0
2.5 P1
2.0
P2
1.5
1.0
0.5
P1 = 2.558 kW
P2 = 1.951 kW
0
Date: 28/01/2020
H SP 5A-21, 3*400 V, 50Hz eta
Description Value [m] [%]
Q = 5.002 m³/h
General information: H = 85.07 m
Product name: SP 5A-21 Es = 0.5113 kWh/m³
140 n = 2885 rpm
Product No: On request Pumped liquid = Water
130
EAN number: On request Liquid temperature during operation = 20 °C
120 Density = 998.2 kg/m³
On request
110
Technical:
Pump speed on which pump data are 100 100
based: 2900 rpm
90 90
Actual calculated flow: 5.002 m³/h 80 80
Resulting head of the pump: 85.07 m 70 70
Stages: 21
60 60
Impeller reduc.: NONE
50 50
Shaft seal for motor: LIPSEAL
40 40
Approvals on nameplate: CE,EAC
30 30
Curve tolerance: ISO9906:2012 3B
Model: A 20 20
0
Rp1 1/2
101
Installation: 101
Pump outlet: Rp1 1/2
Rp1 1/2
Motor diameter: 4 inch
Liquid:
Pumped liquid: Water
Maximum liquid temperature: 40 °C
597
Electrical data:
Motor type: MS402
Applic. motor: GRUNDFOS
349
95
Rated power - P2: 2.2 kW
Power (P2) required by pump: 2.2 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
L1 L2 L3 PE
Rated current: 5.50-5.50-5.70 A
Starting current: 440-460-470 %
Cos phi - power factor: 0.85-0.82-0.77
Rated speed: 2850-2860-2870 rpm
Start. method: direct-on-line
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): B
Motor protec: NONE
Thermal protec: external
U V W PE
Built-in temp. transmitter: no
Motor No: 79192007
Others: M
Minimum efficiency index, MEI ≥: 0.50 3
Date: 28/01/2020
Description Value
EuP Standalone/Prod.
ErP status:
Net weight: 18.7 kg
Gross weight: 20.1 kg
Shipping volume: 16.3 m³
Danish VVS No.: 388315210
Swedish RSK No.: 5852973
Finnish LVI No.: 4762677
Norwegian NRF no.: 9040876
Date: 28/01/2020
On request SP 5A-21 50 Hz
cos phi SP5A-21 + MS402 2.2 kW 3*400 V, 50 Hz I
eta [A]
cos phi
0.8 8
eta
0.6 6
I
0.4 4
0.2 2
P2 = 1.951 kW
cos phi = 0.78
Eta = 76.3 %
I = 4.76 A
0.0 0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 P2 [kW]
n P1
[rpm] [kW]
n
2800 4.0
P1
2600 3.0
2400 2.0
2200 1.0
P1 = 2.558 kW
n = 2885 rpm
2000 0.0
Date: 28/01/2020
On request SP 5A-21 50 Hz
101
Rp1 1/2
597
943
349
95
Date: 28/01/2020
On request SP 5A-21 50 Hz
L1 L2 L3 PE
U V W PE
M
3
Date: 28/01/2020
Order Data:
Product name: SP 5A-21
Amount: 1
Product No: On request