Professional Documents
Culture Documents
Sony ACX705AKM (LCD 2.8inch)
Sony ACX705AKM (LCD 2.8inch)
Description
The ACX705AKM is a 6.92cm diagonal active
matrix reflective color TFT-LCD module with a front
light unit and a driving board. This module provides
low power consumption which is realized by built-in
3-bit digital interface circuitry.
Features
• Number of dots: 240 × RGB × 160
• Dot size: 80µm × 240µm
• High reflectivity: (25% typ.)
• High contrast ratio: (13:1 typ. at the condition of turning off the front light)
• Number of colors: 512
• Low power consumption (47mW typ.) with a driving board composed of a LCD controller IC,
a reference driver IC and a DC-DC convertor
• Built-in 3-bit digital interface circuitry
• Compact size
• Thin and bright front light unit
Element Structure
• Active matrix TFT-LCD panel with built-in peripheral driving circuitry using low temperature polycrystalline
silicon transistors
• Number of dots
Total number of dots: 242 × 3 (H) × 162 (V) = 117,612
Number of active dots: 240 × 3 (H) × 160 (V) = 115,200
• Dimensions
Module dimensions: 71.4mm × 52.0mm × 4.8mm (t) (parts area 6.5mm (t) max.)
Effective display dimensions: 57.6mm (H) × 38.4mm (V)
Applications
PDA, etc.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E00847-PS
ACX705AKM
Iled [mA]
10
0
0 20 40 60 80 100
Ta [°C]
Bottom
Top
Rear View
Left Right
Bottom
Pin 1 Pin 22
–2–
ACX705AKM
Module Configuration
This module is composed of a reflective color TFT-LCD panel, a front light unit and a driving board as shown in
the figure below.
[(75.5)]
71.4 (Outer frame)
6.4 ± 0.3 63.4 (Cover plate) (1.6)
+0.1 (3.3)
Front View 8.1 60 0 (Window)
(2) (59.4) (2)
27.52
0 (Window)
44.2 (Cover plate)
(40.2)
40.8 +0.1
(24.48)
(5.93)
Active area
center
4
8
(4.08)
(2.38)
(2)
(26.4)
6
(5.9)
7
5.5
11.5
(1.15)
(8.75) 30.5
ACX705AKM-01
52 ± 0.3 (Outer frame)
(Parts area)
37 0 (Window)
+0.1
35 –0.1
0
ACX705AKM-7 T
(7)
(6)
–3–
Block Diagram
MIC1
MIC2
+9.0V
DC-DC
Vcc1 (+3.8V) Converter +5.0V
–6.5V Cover Plate
Vcc2 (+3.0V)
22
–4–
S/D Control pulse
Poly-Si TFT LCD
(240 × RGB × 160)
V Driver
Control pulse
+5.0V
8
CXD2475TQ Vref
(Reference
15mA Voltage Driver) H Driver
(25°C) VCOM
+9.0V, –6.5V
ACX705AKM
ACX705AKM
Pin Description
–5–
ACX705AKM
S/D
There are input for power up/down sequence.
Power Up Sequence
Vcc1, Vcc2
Vcc1, Vcc2
0
Vcc2
S/D Inactive (low) Active
0
MCK Vcc2
Hsync Invalid (low) Valid
Vsync 0
DATA (in)
1 Field (typ.)
Vcc2
S/D Active In active (low)
0
Vcc1, Vcc2
Vcc1, Vcc2
0
Vcc2
Vsync
0
13 Fields
–6–
ACX705AKM
Electrical Characteristics
Vt+ — — 2.2 V
All input pins excluding MCK
Input voltage 2 Vt– 0.5 — — V (LVTTL level Schmitt trigger
input)
Vt+ – Vt– 0.2 — — V
Supply current Iled — 15 — mA LED VDD
VI = VCC2 | IH1 | — — 1.0 µA
Input current 1 All input pins
VI = 0V | IL1 | — — 1.0 µA
ICC1 — 11.0 17.0 mA VCC1
Current consumption
ICC2 — 1.6 4.0 mA VCC2
Total power consumption P — 47 77 mW
ICC1s — 0.1 10 µA
Standby current
ICC2s — 40 200 µA
MCK frequency fMCK — 3.26 4.20 MHz
Horizontal frequency fh — 12.0 15.4 kHz
Vertical frequency fv — 60.0 77.2 Hz
Data input pin capacitance Cdata — — 20 pF R0 to R2, G0 to G2, B0 to B2
Hsync input pin capacitance Chsde — — 20 pF Hsync
Vsync input pin capacitance Cvs — — 20 pF Vsync
MCK input pin capacitance Cmck — — 20 pF MCK
S/D input pin capacitance Csd — — 20 pF S/D
–7–
ACX705AKM
Operating Conditions
Lamp Life
The lamp life shall be greater than 50 hours. The operating lamp life is defined as having ended when the
illumination of light has reached 50% of the initial value.
–8–
Horizontal Timing Chart
272 dots
230 235 240 245 250 255 260 265 270 0 5
Hsync
16 dots 16 dots
DATA 227 228 229 230 231 232 233 234 235 236 237 238 239 240 1 2 3 4 5 6 7 8 9 10 11
tch tcl
–9–
MCK
thss
tclk
Hsync
thsw
DATA 1 2 240
tds tdh
ACX705AKM
Vertical Timing Chart
200 lines
155 160 165 180 185 190 195 0 5 10
Hsync
Vsync
20 lines 20 lines
Hsync
tvhde
Vsync
– 10 –
tvsw
DATA
ACX705AKM
ACX705AKM
Gray Scale
0 1 2 3 4 5 6 7
– 11 –
ACX705AKM
Color Coding
The color filters are coded in vertical stripe arrangement.
The shaded area is used for the dark border around the display.
R G B R G B R G B R G B 1
R G B R G B • • • • • • • • • • • • • • • • • • • • • • • • • R G B R G B
• • • • • • • • •
• • • • • • • • •
Active area 160
R G B R G B • • • • • • • • • • • • • • • • • • • • • • • • • R G B R G B
R G B R G B R G B R G B 1
Front view
Scanning Direction
The scanning direction for the horizontal period and for the vertical period are A and B respectively as shown
below.
These scanning directions are from a front view.
Horizontal direction
A
vertical direction
Active area
B
Front view
– 12 –
ACX705AKM
Electro-optical Characteristics
– 13 –
ACX705AKM
Notes:
1. Reflectivity (R)
In the Measurement system-1 (see Fig. 1 (a), (b)), calculate the reflectance factor by using the formula (1).
R (White)
CR = …(2)
R (Black)
3. White chromaticity
In the Measurement system-2 (see Fig. 2), measure the white chromaticity. The illumination source and
viewing area are D65 and 2° respectively.
4. Response time
In the Measurement system-3 (see Fig. 3), measure the electro-optical response time.
5. Viewing angle
In the Measurement system-1 (see Fig. 1 (c)), viewing area is defined by the area which makes the CR ≥ 2.
6. Luminance
In the Measurement system-4 (see Fig. 4), measure the luminance and calculate using the following formula
(3).
Lcfl = (Luminance (1) + Luminance (3) + Luminance (5) + Luminance (7) + Luminance (9))/5 …(3)
7. Luminance uniformity
In the Measurement system-4 (see Fig. 4), measure the luminance and calculate using the following formula
(4).
Flunif = Luminance (maximum spot)/Luminance (minimum spot) …(4)
– 14 –
ACX705AKM
Optical fiber
Optical Mearurement
Detector Equipment
Light source
(a)
θ = 30° θL
θT
Top θB Top
Left Left θR
Right Right
Bottom Bottom
(b) (c)
Optical fiber
Optical Mearurement
Detector Equipment
Light Source
Integrated sphere
LCD panel
– 15 –
ACX705AKM
LCD panel
Light sourse
30°
Oscilloscope Optical Detector
Tr Tf
100%
90%
Optical
Instruments
Response
10%
0%
Time
– 16 –
ACX705AKM
Illuminance
Colorimeter
BM-5A
1°
400 ± 50mm
Reflective
LCD Module
L/6
1 2 3
L/3
L 4 5 6
L/3
7 8 9
L/6
– 17 –
ACX705AKM
Image Persistence
Display a completely white screen for 20 minutes and continuously display the test pattern shown below for a
minimum of two hours. Then display a completely white screen. A visible image of the box pattern shall not
persist more than two seconds viewed through 2% ND filter. Pattern is black box 80 pixels wide and 120 pixels
in length at minimum luminance, centered horizontally and vertically in the active area. The remainder of the
screen is white.
Cross Modulation
Cross modulation (cross talk) shall be inspected with following test pattern with 2% ND filter. Pattern is black
box 80 pixels wide and 120 pixels in length at minimum luminance, centered horizontally and vertically in the
active area. The remainder of the screen is 50% gray.
H/4
H/2
H/4
There shall be no visible difference of luminance around the black box through 2% ND filter.
– 18 –
ACX705AKM
Notes on Handling
(3) Others
a) Do not twist or bend the flexible PC board especially at the connecting region because the board is
easily deformed.
b) Do not drop the module.
c) Do not twist or bend the module.
d) Keep the module away from heat sources.
e) Do not dampen the module with water or other solvents.
f) Avoid storage or using the module at high temperature or high humidity, as this may result in damage.
– 19 –
1 Front sheild case
2 Rear sheild case
3 Flexible cable (75.5)
Package Outline
38.1 (33.3)
Unit: mm
0
(7.5) 52.6 -0.1 ( Parts area) (11.3) (1.7) (6.3)
2
1 2
(9)
(10)
ACX705AKM-01
27.52
52
37
0
40.8
0
±0.3
0
+0.1
+0.1
(40.2)
52 ±0.3
4
44.2 (Cover plate)
(Window)
(Outer frame)
(24.48)
– 20 –
ACX705AKM-7 T
(6)
(7)
4
(2)
6
(4.08)
(2.38)
5
(5.9)
(5.93)
(26.4)
7 8
2)
3 ±0.5
0.3 (1.15)
5.5
(8.75) 30.5
11.5
Sony Corporation
This datasheet has been download from:
www.datasheetcatalog.com