Professional Documents
Culture Documents
www.neatel.com
All NEATEL Rights
Professional Precon Solution Provider
Speed up your fiber network
wwww.neatel.com
CONTENTS
Optical Distribution Networks Solution Overview........................................P4-10
▶ HUAWEI FastConnect
▶ CORNING OptiTap
▶ FURUKAWA Slim
▶ FIBERHOME
75mins x 5 workers
150m OSP 1 Group
375mins / Worker
60mins x 3 workers
150m OSP 1 Group
180mins / Worker
Hub Box FastConnect Drop Cable NTHW505 1x9 FAT NTHW505 1x8 FAT
Traditional Optical Cable Construction - The progress of cabling and FAT installation may interfere with each other
12/24 FO
IN OUT
NEATEL 1FO FastNet System Solution - Routing and FAT do not affect each other, saving 30% of TTM
1 FO
Up to 90% increase in network recovery efficiency - Case of Fiber break off to failed connection
Traditional
SPL SPL
Operator A, Fiber Broken Case:
FAT replacement, Add splices
re-splicing, routing 5 hours/node (4 people)
and sealing Box fault Fiber Break off
NEATEL
Plug and play, easy to operate,
Replacing a double
SPL ended fiber optic Easy to replace:
SPL
cable with preconnectors
NTHW505
Pole / Aerial / Duct installation
1 FO
➊ Hub Box
1FO 1FO
CO Outdoor single fiber solution Outdoor multi-fiber solutions MDU single fiber solution
Ground / Duct Ground Indoor Duct
• Rapid deployment
Boxed fiber optic cables installed in parallel
• High reliability
Warrant 5 Years VS Warrant 10 Years
TV
PC
OLT ODF
Un-balanced PLC
NAP Box
1:8 Un-balanced PLC
NAP Box
1:8 Un-balanced PLC
NAP Box
1:8 Balanced PLC
NAP Box
1:8
FastConnect+Un-balanced PLC
Open Box Strip the cable Cable fixed and Cut off the Cable routing Fusion splicing
Tray cabling Close box Pole installed
sealed cable need professional
Unit: mm
1800
Distribution Straight-through part
Cable 65 Strength Strength 65
Member Member
Branching part
Drop 1800
Cable
● Requested professional and technical person, 20 more steps for installation ● 1 FAT installation spend 90 mins by 2 man job
• No stitching required
• No need to re-box
• No need to route and seal fiber optic cables
Step 1 Step 2
● Simplified installation, plug and play ● 1 FAT installation spend 15 mins by 2 man job
NEATEL Solution
● Plug and play, no need to splice and reopen FAT
Traditional NEATEL
VS
Fusion Splicer OTDR Cleaver Stripper OTDR Fiber Optic Power Meter VFL
► Hermetically sealed design eliminates the need to re-open the box to reduce the risk of damage
Precon ODN
Ageing
Corrosion
End User FastConnect Drop Cable
Simplified components, innovative PLC uneven splitter provides more reliable connections
1x2 FBT
Uneven PLC + Fusion point + 1x8 even PLC
• 1:2 FBT SPL and splice points are prone to breakage in 3m drop test
70%
IN OUT
30%
1250 nm 1600 1250 nm 1600
Window 1310nm | 1550nm Full range [ 1260-1650nm ]
8 x Users
● Only 1 fiber solution , each uneven chain consists of 3 SUB FAT and 1 END FAT, which supports 32 subscribers
12/24FO ADSS
● Keyed Characteristic
8pcs SC/APC harden adapter with FastConnect cable 8pcs SC/APC harden adapter with FastConnect cable
FASTCONNECT
SC/APC Harden Adapter
Input Cable Plug Harden Output for next box Harden Input
Harden Input
Specification: 334 x 210 x 112mm Specification: 198 x 160 x 70mm Specification: 198 x 160 x 70mm
Capacity: 10 x SC/APC Harden Output, 2 Cable input Capacity: 1 input, 8 output and 1 port for connect Capacity: 1 input, 8 output
Support: 1pcs 1x9 PLC splitter or 16pcs SC/APC Support: 1pcs 1:9 splitter 30/70
Pigtails
● Only 1 fiber solution , each uneven chain consists of 3 SUB FAT and 1 END FAT, which supports 32 subscribers
12/24FO ADSS
● Keyed Characteristic
8pcs SC/APC harden adapter with SLIM cable 8pcs SC/APC harden adapter with SLIM cable
SLIM Adapter
SC/APC Harden Adapter
Specification: 334 x 210 x 112mm Specification: 198 x 160 x 70mm Specification: 198 x 160 x 70mm
Capacity: 10 x SC/APC Harden Output, 2 Cable input Capacity: 1 input, 8 output and 1 port for connect Capacity: 1 input, 8 output
Support: 1pcs 1x9 PLC splitter or 16pcs SC/APC Support: 1pcs 1:9 splitter 30/70
Pigtails
● Only 1 fiber solution , each uneven chain consists of 3 SUB FAT and 1 END FAT, which supports 32 subscribers
12/24FO ADSS
● Keyed Characteristic
8pcs SC/APC harden adapter with OptiTapt cable 8pcs SC/APC harden adapter with OptiTap cable
OptiTap Adapter
SC/APC Harden Adapter
Specification: 334 x 210 x 112mm Specification: 198 x 160 x 70mm Specification: 198 x 160 x 70mm
Capacity: 10 x SC/APC Harden Output, 2 Cable input Capacity: 1 input, 8 output and 1 port for connect Capacity: 1 input, 8 output
Support: 1pcs 1x9 PLC splitter or 16pcs SC/APC Support: 1pcs 1:9 splitter 30/70
Pigtails
● Only 1 fiber solution , each uneven chain consists of 3 SUB FAT and 1 END FAT, which supports 32 subscribers
12/24FO ADSS
● Keyed Characteristic
8pcs SC/APC harden adapter with FIBERHOME cable 8pcs SC/APC harden adapter with FIBERHOME cable
Fiberhome Adapter
SC/APC Harden Adapter
Specification: 334 x 210 x 112mm Specification: 198 x 160 x 70mm Specification: 198 x 160 x 70mm
Capacity: 10 x SC/APC Harden Output, 2 Cable input Capacity: 1 input, 8 output and 1 port for connect Capacity: 1 input, 8 output
Support: 1pcs 1x9 PLC splitter or 16pcs SC/APC Support: 1pcs 1:9 splitter 30/70
Pigtails
www.neatel.com
All NEATEL Rights
PROFESSIONAL ● TECHNICAL SUPPORT ● TEAM WORK
Products
Picture
Picture
Picture
Picture
Picture
Picture
oPicture
1FO SC APC 1FO SC APC 1FO SC APC 1FO SC APC 12FO MPO APC
FastConnect OptiTap Slim Fiberhome FastConnect
Picture
Picture
Picture
NEATEL
Cost-effective FTTX solution
and value-added service
Provider
Configuration
Standard Optional
Input Hole PG13.5 MINI SC, H connector (Optional), MINI IPMPO, ODVA or Customized
Output Hole MINI SC, H connector MINI SC, H connector (Optional), MINI IPMPO, ODVA or Customized
Extend Hole Closed MINI SC, H connector (Optional), MINI IPMPO, ODVA or Customized
• Quality Control
We strongly believe that product quality and performance are the key success factors of a company. This mindset has
been rooted throughout the whole organization, everybody believes that only high standards are necessary to win the
customer and market.
• Excellent Technology
We always learn new technology by investing in production facilities, engineering process control systems, and talent
development to maintain our status as a leading fiber optic connection solutions.
• High Standard
We believe a high standard of professionalism towards our product and service offerings combined with our superior
engineering solution serve to satisfy the unique needs of our customers.
■ Advantages:
Install time for each port
HC TCO 4+ years
30mins
780,000+
Pre-connected ports
5mins
Saving 83% Capacity/year
2 seconds connecting
no need re-open the box Traditional Pre-connectoized
www.ne.com