Professional Documents
Culture Documents
0 1
Release Note
21/06/2019 Version : 1
AkzoNobel | Corob UDCP v2.2.0 2
Table of Contents
Page 3 Introduction
Page 4 UDCP New Features
Page 5 COROBTech New Features
Page 6 EvoService New Features
Page 7 Deliverables
Page 8 Further Information and Support
21/06/2019 Version : 1
AkzoNobel | Corob UDCP v2.2.0 3
Introduction
This document describes the changes and new functionality included in this
UDCP Driver release.
This release brings together support for all of COROB’s equipment into one
driver so this will work machinery from AC10000 and Banco up to 5G FIRST1
and Evo machines.
This release also brings full support for the UDCP V2 functions, in particular
Recipe Recovery which is available in Mix2Win Next V2.5 onwards.
This update also includes new versions of COROB Tech and EvoService.
For any help and support to implement any of these changes in your market get
in touch with your software support contact.
21/06/2019 Version : 1
AkzoNobel | Corob UDCP v2.2.0 4
21/06/2019 Version : 1
AkzoNobel | Corob UDCP v2.2.0 5
COROBTech Update
New Features
CorobTECH Update
With this version of COROBTech COROB have now completed full compatibility
with Windows 10 (32 and 64bit versions).
Use this software for all machines up to and including 4G. For 5G machines use
EVOservice software.
21/06/2019 Version : 1
AkzoNobel | Corob UDCP v2.2.0 6
Evoservice Update
New Features
EvoService Update
Use EVOservice for all 5G equipment.
Evo service includes the following updates;
• Resume Formula for Shopkeeper user: The resume formula feature is now
available on the Shopkeeper profile. It allows the completion of the formula dis-
pensing in case of interruption. It is extremely useful in case Mix2WIn Next
V2.5 or later is not installed.
• Inter-dispensing time: The interval time between each consecutive dispensing
can now be custom-tailored for each single circuit. This is to avoid that the rota-
tion of the table starts before the dispensing process is fully accomplished. Be-
fore, the interval time value, was 1,5 seconds for all the circuits and could not
be changed.
• FIRST1 4G configuration upgrade. Starting from current version it is possible to
convert ‘local’ or backup file of FIRST1 4G into to new FIRST1 5G configura-
tion.
• Wireless communication to COROB Connect available. In “Options” >
“Settings” > “Communication” > “COROB Connect” it is now possible to enable
a wireless communication to the dispenser featuring the COROB Connect mod-
ule.
• Dispenser ID change. In the configuration dialog box it is now possible to
change the current dispenser ID. If the configured ID is already used by anoth-
er dispenser, it is switched.
• QR Code export. Calibration data and colorants association can be exported in
the QR Code format via “Configuration” > “Export colorant and calibration data”
> “To QR Code…”.
• Levels update after STOP formula. In case of STOP command during tinting,
the colorant levels are updated accordingly with the real dispensed amount.
• New scales supported: - Kern (models EW/EG-N/EWB), Gibertini (models
Crystal, Eternity, EU-C, PTF36-C)
21/06/2019 Version : 1
AkzoNobel | Corob UDCP v2.2.0 7
COROB Update
Deliverables
UDCP 2.2.0.exe
A single file exe is available as a zip file for download from the UDCP website.
This is both an installation and an update so can be used in all situations.
In order to manage and configure Corob equipment additional software, COROBTech
or Installation Utility, will also need to be installed depending on the equipment to be
used.
Note. Running the installer directly will automatically uninstall any previous versions
as part of the installation—there is no need to carry out any uninstallations first.
It is also possible to carry out an unmanaged update as part of a batch file using the
commands “UDCP 2.2.0.exe /SILENT” or “UDCP 2.2.0.exe /VERYSILENT for re-
duced messaging.
Please get in touch if you would like help to implement any of these functions.
CorobTECH_5.9.3_setup.exe
A single file exe is available as a zip file for download from the UDCP website.
This is both an installation and an update so can be used in all situations.
EVOservice 4.0.3.exe
A single file exe is available as a zip file for download from the UDCP website.
This is both an installation and an update so can be used in all situations.
21/06/2019 Version : 1
AkzoNobel | Corob UDCP v2.2.0 8
21/06/2019 Version : 1
AkzoNobel | Corob UDCP v2.2.0 9
Colofon
Editorial Staff:
Raf Frederickx, Ian Oakes, Adnan Ali.
Photography:
AkzoNobel Image Bank, Ian Oakes, Raf
Frederickx
21/06/2019 Version : 1