This document contains an individual assignment for a Machine Elements and Design module. It provides instructions for a student to design a helical compression spring given specific parameters: a maximum outside diameter of 3/4 inch, a free length of 2 inches, and able to withstand a 35-pound load at 1/2 inch deflection. The student is asked to assume an outside diameter of 0.725 inch and solve for wire diameter (Dw), assuming severe service and closed square ground ends made from music wire. The student is then to determine the number of coils needed to meet the design criteria using the spring from the previous calculation.
This document contains an individual assignment for a Machine Elements and Design module. It provides instructions for a student to design a helical compression spring given specific parameters: a maximum outside diameter of 3/4 inch, a free length of 2 inches, and able to withstand a 35-pound load at 1/2 inch deflection. The student is asked to assume an outside diameter of 0.725 inch and solve for wire diameter (Dw), assuming severe service and closed square ground ends made from music wire. The student is then to determine the number of coils needed to meet the design criteria using the spring from the previous calculation.
This document contains an individual assignment for a Machine Elements and Design module. It provides instructions for a student to design a helical compression spring given specific parameters: a maximum outside diameter of 3/4 inch, a free length of 2 inches, and able to withstand a 35-pound load at 1/2 inch deflection. The student is asked to assume an outside diameter of 0.725 inch and solve for wire diameter (Dw), assuming severe service and closed square ground ends made from music wire. The student is then to determine the number of coils needed to meet the design criteria using the spring from the previous calculation.
DEPARTMENT OF TRANSPORT AND ENGINEERING TECHNOLOGY
COURSE : DPWOGE
MODULE CODE : MET 06102
MODULE NAME : MACHINE ELEMENTS AND DESIGN
TASK : INDIVIDUAL ASSIGNMENT 02
LECTURER’S NAME : Mr. MAZURI LUTEMA
STUDENT'S NAME : TAIMORI F. HAMADI
REGISTRATION NUMBER : NIT/BTPOGE/2021/34
SEMESTER :1
ACADEMIC YEAR : 2023/2024
SUBMISSION DATE : 2nd February 2024
QUESTION
1. Design a helical compression spring for the following conditions:
– ¾-inch maximum outside diameter – 2 inches free length – 35-pound load at a ½-inch deflection• Assume severe service and S&G ends made from music wire. • Try an outside diameter of .725-inch and solve for Dw. • As many properties of the spring depend on the wire size, often a wire size is assumed and then verified. • Assume Dw = 0.1 for this first trial 2. Determine the number of coils necessary to meet the design criteria using the spring from the previous problem (