Professional Documents
Culture Documents
bear
Tools and
Materials
-Crochet hook no.2/2mm (Clover Amour)
-tapestry needle for sewing pieces
-any kind of white thread to create live eyes
-Sport-weight yarn: I used YarnArt Jeans no.48 or
no.87 (50g/160mt)-1 skein (beige)
-plastic for the insole we will insert into the leg to
make our teddy stand straight (I use plastic from
container lids, attachment discs also can be made
from the same plastic)
KEEP IN MIND:
YOU MAY USE ANY SUITABLE
YARN AND TOOLS FOR YOU
Abbreviations
sc-single crochet
dc-double crochet
inc- increase
dec-decrease
ch- chain
tch-turning chain
sl st- slip stitch
MR-magic ring
st/sts - stitch/stitches
rnd -round
BLO/FLO - back/front loops only
You may insert the WIRE (any kind of it) into the arm, just do not forget to wrap the
ends of the wire with a medical plaster so that it does not pierce the fabric of the
arm.
Stuff the arms tightly, do not stuff only the upper 3 rnds to attach them to the body
later.
Fold the arm in half .
IMPORTANT.
you should work the two folded edges of the arm together as follows:
dec*3 into both folded edges of the arm
(i.e. stretch with your hook 1 loop out ( working into both folded edges, do not finish
the sc; you now have 2 loops on your hook) , then stretch 1 more loop out from the
next st of the two folded edges - and now you have 3 loops on your hook -then
crochet the two incomplete sc (all the 3 loops on your hook) together with one top
and repeat 2 more times). You should have worked the 3 sts now (and we will attach
arms as we crochet into these 3 sts).
Break yarn.
Wok the second arm the same way.
Ears-make 2
MR - 6sc
1rnd - inc*6 = 12
2rnd - (sc, inc)*6 = 18
3rnd - sc into every st = 18
4rnd - (2sc, inc)*6 = 24
5rnd - (2sc, dec)*6 = 18
6rnd - sc into every st = 18
Cut off the yarn, leaving a long tail for sewing the ears to the head.
Work the second ear the same way.
Body
MR-6sc
1rnd-inc*6=12
2rnd - (sc, inc)*6 = 18
3rnd - (2sc, sc)*6 = 24
4rnd - (3sc, inc)*6 = 30
If you have some plastic, you may make the attachment discs yourself . Put the circle you have
now to the plastic, circle it and cut out the two pieces (these will be required discs).
5rnd- BLO sc into every st = 30
6rnd- sc into every st = 30
7rnd - (4sc, inc)*6 = 36
ATTACH ARMS
8rnd - 15sc , 3sc together with sts of the first arm, 15sc,
3 sc together with sts of the second arm = 36
9rnd -(5sc, inc)*6 = 42
10rnd - sc into every st = 42
11rnd - (6sc, inc)*6 = 48
12rnd - sc into every st = 48
13rnd - (7sc , inc)* 6 = 54
14rnd - sc into every st = 54
15rnd - (8sc , inc)*6 = 60
16rnd - sc into every st = 60
17-30rnds (19 rnds) - sc into every st = 60
Insert the attachment discs and
the cotter pin into the head and
attach it to the body
Put the attachment disc into the head (inside) between rounds 15 and 16 and insert a T-
shaped cotter pin into it
29rnd-(3sc, dec)*6 = 24
30rnd - (2sc , dec)*6 = 18
Stuff the head tight.
Pull the pin ends in the body out of the second disc, pressing them very tightly (they should
create smth like a flower), BEND THEM to DIFFERENT SIDES, round off the ends to the center.
Embroider the nose
Use fine black thread and the needle . We start inserting it through the hole in
the head, and leaving a long tail. We bring it out in the point where the nose will
be located (between rnds 2 and 3 of the head) and embroider the nose with
simple stitches back and forth (I use the sewing thread). With the same strong
fine black thread and the needle, through the hole in the head, we bring the
needle out at the end of the nose center, do a wide stitch over the 3 rows down,
and bring it out back in the hole in the head. Next, we do the small stitch at the
bottom of the division line of the muzzle. Insert the needle into the hole in the
head, bring it out in the end of the division line, stitch over 1 or 2 sc sts of the
fabric and go back to the hole in the head. We tie the thread ends together very
tightly, pulling on the nose with a finger so that it is slightly flattened and the
thread ends are tightly stretched.
Embroider the live eyes
Use white thread and needle.
Insert the needle into the hole in the head, leaving a long tail out, and bring it out close to an
eye, we skip half of the eye and bring the needle back into the hole in the head.
Do the same for the second eye.
With the fine black thread we insert the needle through the hole in the head and make the first
eyebrow.
Skip 2 rows up from an eye , the width of an eyebrow is 2 or 3sc sts to the side. Bring the
needle back into the hole in the head and tie the thread ends together.
Eyebrows can be done anywhere you like.
You may not do them at all to your taste.
31rnd - (sc,dec)*6 = 12
32rnd - 6*dec = 6
33rnd- using needle, close the hole, or you may decrease sts before the hole is closed.
Break yarn and weave in the yarn tail.
Body
Let's finish crocheting the body
31rnd - (8sc, dec)*6 = 54
32rnd - (7sc, dec)*6 = 48
33rnd - (6sc, dec)*6 = 42
34rnd - (5sc, dec)*6 = 36
35rnd - (4sc, dec)*6 = 30
36rnd - (3sc, dec)*6 = 24
37rnd - (2sc, dec)*6 = 18
Stuff the body tightly.
38rnd - (sc, dec)*6 = 12
39rnd - dec*6 or more to close the hole.
Break yarn, weave in the yarn tail.
Legs-make 2
Chain 8, work into the 2nd st from the hook around the chain foundation.
Do (slst, ch1)* in the end of each row, but it's not obligatory. You may just continue crocheting
in amigurumi rounds, if this more suitable for you.
1rnd - inc, 5sc, [5sc into one st], to the other side of the chain foundation 5sc, inc = 18
2rnd - inc, 6sc, inc*4, 6sc, inc = 24
3rnd - inc, 9sc, inc, 2sc, inc, 9sc, inc = 28
4rnd - (3sc, inc)*7 = 35
5rnd - sc into every st = 35
6rnd- (4sc, inc)*7 = 42