Professional Documents
Culture Documents
Angle Grinder Ews 17-125-Q Power: Constant Electronics
Angle Grinder Ews 17-125-Q Power: Constant Electronics
Constant electronics
Allows fast work progress, because
the speed remains constant even under
load.
Restarting protection
Art. No. 5707 006 0
Following an interruption in the power
P. Qty. 1 supply, the angle grinder does not
Min./max. nominal voltage 220 / 240 V/AC restart unintentionally, thereby greatly
Min./max. frequency 50/60 Hz reducing the danger of injury.
Protection class Protection class II / protective insulation
Power consumption 1,700 W
Overload protection and gentle
Output 1,040 W start-up
Max. idling speed 11,000 rpm Increased service life and operating
Thread type x spindle thread diameter M 14 mm safety of the machine.
Max. cutoff wheel diameter 125 mm
Machine weight 2.5 kg
Recoil protection
Cable length 4m No recoil if the wheel is blocked by
mechanical decoupling. For a high level
Delivery scope for Art. No. Designation Art. No. Quantity of user protection and rapid ongoing
Clamping nut 5807 445 031 work.
5707 006 0 Protective hood 5807 003 014 1
Anti-vibration handle 5807 004 009 1
Note
Available in the ORSYfleet fleet management system
STEP - 8/6/2014 - 17168 - ©