You are on page 1of 8

THERMAIR©

HOT WATER SYSTEM

THERMAIR© is an energy efficient Heat


Pump Water Heater designed to be installed
where a traditional solar hot water system
may not be suitable. It is a smart renewable
energy solution to replace your electric wa-
ter heater.

No roof-mounted solar collectors: Ideal


for installations not suitable for traditional
solar water heaters.

Energy Efficient: Energy efficient water


heating. THERMAIR© uses less energy than
a conventional electric water heater

Reduced Energy Use: Water heating en-


ergy use may be reduced by up to 70%
when replacing an electric water heater.

Reliable and Economical Heating


WHY CHOOSE
ENERGY EFFICIENCY: THERMAIR© Hot THERMAIR©
Water System’s offer the highest level of
energy efficiency with the ability to pro- Hot water usage accounts up to 30% of annual
vide 3-4 kW of heat energy for every 1 kW
used. power bill. THERMAIR© Hot Water System pro-
vide energy efficient solutions for all applications
where water is heated.
The more energy
efficient a heating system is, the cheaper it is to
run. Hot Water System offers the cheapest
available kW/h rate for water heating.

CONVENIENT CONTROLS: THERMAIR© Hot Water System’s supplies hot


water which deliver radiant heat energy to potable water systems. Easy
to use controls allow to adjust temperature settings at the touch of a
button.

IN-BUILT CIP SYSTEM(CLEAN IN PLACE): In high temperature operation of any Hot Water System, the
cleaning of Plate Heat Exchanger is required. THERMAIR© Hot Water System’s effective circulation of non
-toxic fluid cleans the surfaces. This cleaning process maintains efficiency and increase the life of Com-
plete System.

ECO FRIENDLY REFRIGERANT: THERMAIR© Hot Water System are one of the most efficient ways to heat
water all year round. A highly efficient system utilising an environmentally friendly R410A refrigerant
which has zero ozone depletion potential. This refrigerant allows useful heat energy to be absorbed even
in low outdoor temperature.

IN-BUILT PUMP: High quality pump circu-


lates the water between the Hot Water
System and hot water storage tank to
make the installation simpler and faster.

REDUCED CO2
EMMISIONS

THERMAIR© Hot Water System’s are energy


efficient and can achieve 3 to 4 COPs; means
they produce 3-4 kW of heat for every 1 kW
consumed. As no fossil fuels are directly burnt
in the operation of a Hot Water System, CO2
emissions are also greatly reduced in compari-
son to gas or oil-fired boilers
YEAR ROUND
PERFORMANCE
THERMAIR© Hot Water System provide
hot water heating year round, operating
effectively in both high and low outdoor
ambient temperatures.

SAVE

MAINTENANCE
FREE

Compared to traditional water boilers,


THERMAIR© Hot Water System’s are
maintenance free: fuel deliveries, disposal
of ashes, chimney cleaning are eliminated
THERMAIR© Hot Water System does not
generate heat, it simply captures it and
moves it from air to water thus, providing
an efficient an environmentally friendly
system for heating your water.

Heat is drawn from the environment surrounding the heat pump which is then turned into heat for
the water heater .
Environmental refrigerant gas absorbs and transfers the heat energy through the refrigeration cir-
culation system.
The fan circulates air through the outer Evaporator Air Coil that acts as a heat collector.
The liquid refrigerant in the air coil absorbs the available heat in the air transforming it to a gas.
The refrigerant gas is then pumped by the Compressor.
When this warmed gas is compressed, it intensifies or concentrates the heat. This intensely hot gas
is then pumped into the Heat Exchanger Condenser where the actual heat exchange takes place.
As the water passes through the Heat Exchanger, the hot gas gives up its heat to the cooler water
thus heating it.
The refrigerant returns to a liquid state and is pumped through the Expansion Valve and then into
the Evaporator Air Coil to start the process over again.
Technical Specification
PE's Model 1-150 1-200 2-300 2-500
Heating Capacity 3.5 KW 3.5 KW 7 KW 7 KW
Input Power Required 0.8 KW 0.8 KW 1.8 KW 1.8 KW
Input Voltage 220 V Single Phase
COP 4.3 4.3
Peak Flow Rate at dT = 30°C 200 lph peak 350 lph peak 500 lph peak 700 lph peak
Peak Flow Rate at dT = 50°C 180 lph peak 300 lph peak 420 lph peak 620 lph peak
Compressor Type Reciprocating / Rotary
Compressor Brand Mitsubishi / Panasonic / Sanyo
Expansion Valve Electronic
Heat Exchanger High Efficient Tube in Tank Heat Exchanger
Ambient Temperature (-5°C to 40°C)
Circulation Pump Not Required
Electrical Warranty 1 Year
Calorifier 150 litres 200 litres 300 litres 500 litres
Calorifier MOC MS with Epoxy / MS with PE’s Coating / SS
Insulation Included
Calorifier Warranty 5 Years / 12 Years / 5 Years
SIZES TO FIT ALL REQUIREMENTS
support@vhil.in

+91-797-268-7844

Office no. 2, Chaitanya Terrace,


Manaji Nagar, Narhe, Pune 41104

You might also like