The document contains 10 multiple choice questions about steel structures. The questions cover topics like the naming conventions for rolled steel tubes, thickness of rolled steel products, width of steel plates, recommended connection types, limit states of strength, variable actions, characteristic actions, and the effective diameter of a river for rivet sizing.
The document contains 10 multiple choice questions about steel structures. The questions cover topics like the naming conventions for rolled steel tubes, thickness of rolled steel products, width of steel plates, recommended connection types, limit states of strength, variable actions, characteristic actions, and the effective diameter of a river for rivet sizing.
The document contains 10 multiple choice questions about steel structures. The questions cover topics like the naming conventions for rolled steel tubes, thickness of rolled steel products, width of steel plates, recommended connection types, limit states of strength, variable actions, characteristic actions, and the effective diameter of a river for rivet sizing.
a. Outer diameters b. Inner diameters c. Average diameter d. Outer radius Ans: B 2. Maximum thickness of rolled steel strip are a. 2.45 mm b. 4.5 mm c. 6.0 mm d. 8.0 mm Ans: B 3. Minimum thickness of rolled steel flats available is a. 5 mm b. 6 mm c. 8 mm d. 12 mm Ans; A 4. Maximum width of steel plates manufactured are a. 1 m b. 1.5 m c. 2.0 m d. 2.5 m Ans; D 5. IS 800-2007 recommends use of _____ connections as far as possible? a. Riveted b. Bolted c. Welded d. Any of the above Ans: C 6. Limit state of strength includes a. Loss of equilibrium of whole or part of structure b. Fracture by excessive deformations c. Fracture due to fatigue d. All the above Ams: D 7. Which one of the following is not limit state of serviceability? a. Vibration b. Corrosion c. Loss of stability d. Fire Ans: C 8. Which one of the following is not a variable action? a. Handling erection loads b. Wind loads c. Earthquake loads d. Self weight Ans: D 9. Characteristic actions are those which do not exceed ____ percent probability. a. 5% b. 10% c. 12% d. 15% Ans; A 10. The effective diameter of a river is taken as a. Nominal diameter of rivet b. Rivet hole diameter c. Rivet hole diameter + 1.5 mm d. Rivet hole diameter – 1.5 mm Ans: B