Professional Documents
Culture Documents
PI-10-06451 RE: Requirement of Budgetary Quotation for SAE AMS & DIN LN standards
PROFORMA INVOICE
Dear Sir,
We thank you for your e-mail dated 29/12/2023 regarding DIN and SAE Standards.
As desired, we quote below for latest edition of the standard required by you.
Amount after
S. No Standard Description Qty. Unit Rate Handling Handling
(INR)
Aluminum Alloy, Sheet And Plate (2014; -T6 Sheet, -T651 Plate)
Solution And Precipitation Heat Treated
Aluminum Alloy, Die And Hand Forgings, Rolled Rings, And Forging
Stock 2.3cu - 1.6mg - 1.1fe - 1.0ni - 0.18si - 0.07ti (2618-T61)
Solution And Precipitation Heat Treated
Aluminum Alloy 6061, Bar, Rod, Shapes, Tube, And Wire, Extruded
A96061(Stabilized May 2015)
IGST @ 5% 5,299.76
RUPEES ONE LAKH ELEVEN THOUSAND TWO HUNDRED NINETY FOUR AND NINETY ONE PAISE ONLY.
Conversion Rate : Rs. 86.60 to a US Dollar ($) and Rs. 94.90 to a EURO (€).
https://email.gov.in/h/printmessage?id=C:-11261&tz=Asia/Kolkata&xim=1 1/3
1/2/24, 3:24 PM Email
1. As the PDF link to download the standard shall be sent to user’s e-mail ID, it is important to mention e-mail id of the end-user while placing the order. This will enable us to process
your order without any delay.
2. Standard in PDF is available in e-book form, for single user (standalone version), on outright purchase.
Delivery : Link for the DIN and SAE standards will be sent to the user’s e-mail ID within 8 working hours after receiving your order.
Payment : Please make advance payment with order through electronic transfer to our following account. In case of cheque payment, prepare in favour of BSB Edge Private Limited
:
Bank Name & Address HDFC Bank Limited, D-9, South Extension-II, New Delhi-110049
NOTE:
YOU CAN NOW DOWNLOAD FROM WWW.BSBEDGE.COM LATEST VERSIONS OF ASTM, ASME, API, BSI, DIN, SAE, ISO AND IEC STANDARDS by using your credit/debit cards.
Thanking you,
Sincerely yours,
Ashish Ade
Asst. Manager - Customer Relations
M: +91 9371089395 T: +91 22 41278534
www.bsbedge.com
Announcements !!
2023 ASME BPVC - The latest edition of ASME Boiler & Pressure
Vessel Codes
Dear Sir,
It is requested to send a Budgetary quotation for following material standards at the earliest. This is a budgetary inquiry and no financial repercussion on either
side at this stage. It is also requested to provided GeM (Government E Marketplace) Seller registration number and the link of following standards in GeM
portal if available.
https://email.gov.in/h/printmessage?id=C:-11261&tz=Asia/Kolkata&xim=1 2/3
1/2/24, 3:24 PM Email
9 AMS4132H : 2019 Aluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (26
Solution and Precipitation Heat Treated
10 AMS4152N : 2019 Aluminum Alloy Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated and Cold Worked
11 AMS4333E : 2022 Aluminum Alloy, Die Forgings 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress-Reli
and Overaged
12 AMSQQA200/8A : 2015 Aluminum Alloy 6061, Bar, Rod, Shapes, Tube, and Wire, Extruded
Regards.
Sourabh Nege
Jt. General Manager,
Ordnance Factory Ambajhari
(A Unit of Yantra India Limited)
https://email.gov.in/h/printmessage?id=C:-11261&tz=Asia/Kolkata&xim=1 3/3