Professional Documents
Culture Documents
Ac c e s s C o v e r s a n d G r a t i n g s
PA M R E X M a n h o l e C o v e r s
PAMREX Anti-Theft Cover Locks
The following locking devices were designed to increase – The key can only be released High security
resistance to non-authorized access. It must be noted SCS key
once the manhole cover is
that neither of these devices will prevent the locked, thus making it impossible
determined criminal or vandal from gaining access. to forget to lock the cover.
• On-site installation takes five minutes:
Penta Locking Kits
– Punch out the center of the
Handling key
locking bolt area.
– Install the kit in compliance with
the instructions supplied.
Brass bolt
O-Ring washer • Requires use of the SCS key
included in the complete kit.
– The SCS key should not be used
to open the covers. Covers should only
Anti-vibration nut Galvanized steel be opened using
locking bar
standard tools SCS Kits for PAMREX 24"
• 1/4 turn lock activated by an asymmetrical five- and PAMREX 28"
and the lifting
sided bolt head.
points provided. MODEL REFERENCES
• On-site installation takes five minutes:
• The installation of Kit with handling key C7
– Punch out the center of the locking bolt position. Kit without handling key C8
an SCS lock will
– Install the kit in compliance with the Handling key C18
not allow the cover
instructions supplied.
to open under SCS Kits for PAMREX 32"
• Lock must be operated with the handling key pressure when the
MODEL REFERENCES
supplied with the kit or separately. sewer becomes
surcharged. Kit with handling key C15
• The installation of a Penta lock will not allow Kit without handling key C16
the cover to open under pressure when the Handling key C18
sewer becomes
Penta Kits for PAMREX 24" Safety
surcharged. and PAMREX 28"
Protecting field personnel from the risk of injury and
MODEL REFERENCES the below-ground networks from catastrophic failure
Kit with handling key C13 are two of the primary concerns facing engineers and
Kit without handling key C14 municipal administrators.
Handling key C17
Research into compressive forces on intervertebral disks
Penta Kits for PAMREX 32" has allowed scientific assessment of the physiological
restraints linked to handling loads. This research
MODEL REFERENCES
indicates that duration of lift, spinal rotation during
Kit with handling key C5 lift, and proximity of load to the body during the lift
Kit without handling key C6 are key risk factors for utility employees who regularly
Handling key C17
handle manhole covers.
Ductile Iron
SCS Locking Kits Ductile iron provides a superior strength-to-weight
• 1/4 turn lock is activated by a bolt which has a ratio, which allows up to a 50% weight savings
unique notched cylindrical head design; this feature compared to cast-iron designs.
improves security by ensuring that the SCS locking
key can only be removed once the manhole cover
has been returned to the locked position.
• The SCS key has an internal trigger-operated lug
that releases the key from the head of the bolt.
Design of PAMREX • The cover is designed to open
• Improved ergonomics: and release pressure if the
– Hinges reduce the physical effort by 50%. sewer becomes surcharged
– Hinges allow the operator to move in a straight (provided that no additional
line, thereby avoiding damaging spinal rotation. Penta or SCS lock has been
– Hinges minimize the duration of the lift; the fitted and that the frame has
hinge also retains the cover in a safe and been securely anchored to the top of the chimney).
controlled way during and after the lift. • The cover can be removed if required.
– Lifting points in the cover are
designed for use with standard
tools (pickaxe/hook/bar). Strength
• PAMREX is capable of withstanding an average
load of 120,000 lbs. This is much greater than
Inspection the AASHTO (American Association of State
Highway and Transportation Officials) H20 heavy
duty loading.
Insert the bar Raise the cover to make • PAMREX has been independently tested by a
a visual inspection
U.S. facility.
magenta line does NOT print. to show short page trim only.
• Elastomer gasket • Lifting loops integral to frame
• H20 load rated • Locking devices available
PAMREX 28" has the same functional features as PAMREX 24". Access is made
through a wide 28" opening specially designed for systems requiring special
safety conditions for operators.
A O H COVER TOTAL
Standard (none) CDPA70EH
ØC
F
R
21- 184 D 400
EN124
ØO
Drain CDPA70EHDRA
B
PAMREX 32" provides easy opening, while continuing to offer the high
performance levels of the successful PAMREX 24" and 28" clear opening designs.
The 32" clear opening enables maintenance personnel to enter the manhole
with their safety equipment, or to lower bulky equipment into the below-
ground network.
• Gas-arm for assisted opening and closing can be installed in plant only.
Please consult your sales representative.
LIFTING EYES
FRAME SLOTS
FOR AN IMPROVED EMBEDMENT
INFILTRATION PLUG
HINGE
PRODUCT INFORMATION
AND TRACEABILITY:
CLOSED KEY HOLES – H20 LOADING
FOR USE WITH STANDARD – EN 124
TOOLS (BARS, PICKAXE – DATE OF MANUFACTURE
AND HOOK)
Infiltration
To dramatically reduce the amount of surface water • Each PAMREX cover fitted with a plug is identified
entering the sewer system, PAMREX covers feature by means of a sticker (below right).
an innovative plug for the hinge housing.
The “dual wiper” plug reduces the amount of water
entering the network while at the same time enabling
debris to be easily removed from the hinge housing.
• The factory fitted plug (near right) is standard on
all PAMREX 24", 28" and 32" covers.
PAM Access Covers, Curb Units and Gratings.
CertainTeed has an extensive network of agents and distributors, which
ensures that products and technical advice are always available locally.
For more information call 1-877-351-3323, or refer to the PAM general
presentation brochure or specific product brochures shown below.
Additional literature:
CF Manufacturing,
CertainTeed Corporation LLC Telephone: 877-351-3323
P.O. Box 860
P.O. Box 164 Bradford Woods,Fax: 877-351-3320
PA 15015
Valley Forge, PA 19482 www.certainteed-pamcovers.com
724-473-1044 info@cfmanufacturing.com
pamcovers.com
© 3/06 CertainTeed Corporation, Printed in U.S.A. CTPAM-0001-5M-SGCS-SO