Professional Documents
Culture Documents
B. To guide pedestrians
Question ID : 630680393552
Status : Answered
Chosen Option : B
Q.2 According to Terzaghi's bearing capacity theory, what three factors are considered in the
calculation of ultimate bearing capacity?
Ans A. Shear stress, normal stress, and strain rate
Question ID : 630680393521
Status : Answered
Chosen Option : C
Q.3 What is the significance of the friction angle in the Mohr-Coulomb criterion?
Ans A. It determines the soil's plasticity index.
Question ID : 630680393516
Status : Answered
Chosen Option : C
Q.4 Which physical property of soil represents the ability of soil particles to cling together due
to surface tension forces?
Ans A. Cohesion
B. Specific gravity
C. Permeability
D. Porosity
Question ID : 630680393515
Status : Answered
Chosen Option : A
Q.5 Which factors influence the crop water requirement for a particular crop?
Ans A. Irrigation method and rainfall frequency
Question ID : 630680393543
Status : Answered
Chosen Option : B
Q.6 In highway engineering, what does the term "alignment" refer to?
Ans A. The layout of highway features like curves and gradients
Question ID : 630680393548
Status : Answered
Chosen Option : A
Q.7 Which type of pavement is known for its high flexural strength and resistance to heavy
loads?
Ans A. Concrete pavement
B. Gravel pavement
C. Bituminous pavement
D. Composite pavement
Question ID : 630680393551
Status : Answered
Chosen Option : A
Q.8 Which of the following factors can lead to eccentric loading in dams?
Ans A. Uniform water pressure
B. Earthquake forces
D. Temperature changes
Note: For this question, discrepancy is found in question/answer. Full Marks is being
awarded to all candidates.
Question ID : 630680393570
Status : Answered
Chosen Option : C
Q.9 In chain surveying, what is the purpose of using a "chain"?
Ans A. To calculate elevations
C. To measure angles
D. To record coordinates
Question ID : 630680393512
Status : Answered
Chosen Option : B
Question ID : 630680393547
Status : Answered
Chosen Option : A
Q.11 What is the primary characteristic that distinguishes a fixed beam from a simply supported
beam in structural design?
Ans A. The ability to develop moment resistance at the supports due to fixed connections
Question ID : 630680393578
Status : Answered
Chosen Option : A
Q.12 What is the primary benefit of using the "centerline method" in construction estimating?
Ans A. It facilitates quicker construction.
C. It allows for precise cost calculations for structures with varying wall lengths.
Question ID : 630680393498
Status : Not Answered
Chosen Option : --
Q.13 In the design of axially loaded RCC columns, what is the critical limit state that engineers
need to ensure?
Ans A. Ultimate limit state (ULS)
Question ID : 630680393581
Status : Answered
Chosen Option : D
Q.14 When designing steel beams for bending, what factor is primarily considered in selecting
the beam's cross-sectional shape?
Ans A. Ease of fabrication
B. Structural stability
C. Material cost
D. Aesthetic appeal
Question ID : 630680393598
Status : Answered
Chosen Option : B
Q.15 Which formula is commonly used to determine the critical buckling load of a column?
Ans A. Perry-Robertson formula
B. Rankine-Gordon formula
C. Euler's formula
D. Johnson-Fleming formula
Question ID : 630680393599
Status : Answered
Chosen Option : C
Q.16 Which type of sewer system collects both sanitary wastewater and stormwater in a single
pipe?
Ans A. Sanitary sewer system
Question ID : 630680393563
Status : Answered
Chosen Option : C
Question ID : 630680393491
Status : Answered
Chosen Option : B
Q.18 Which type of rail profile is commonly used for high-speed railway lines?
Ans A. Girder rail
B. Vignoles rail
C. Bullhead rail
D. Double-headed rail
Question ID : 630680393558
Status : Answered
Chosen Option : D
Q.19 When designing RCC beams using the Limit State Method (LSM), what aspect of the beam's
behavior is primarily considered?
Ans A. Deflection limits only
Question ID : 630680393546
Status : Answered
Chosen Option : B
Question ID : 630680393540
Status : Answered
Chosen Option : A
Q.21 What is the total pressure on a submerged surface in a fluid due to hydrostatic pressure?
Ans A. It is equal to the atmospheric pressure.
C. It is the sum of the pressure at the surface and the pressure at the centroid.
D. It is always zero.
Note: For this question, discrepancy is found in question/answer. Full Marks is being
awarded to all candidates.
Question ID : 630680393527
Status : Answered
Chosen Option : C
Q.22 The water-cement ratio in concrete is a crucial parameter that primarily influences:
Ans A. Curing temperature
B. Air content
C. Workability
D. Aggregate size
Question ID : 630680393582
Status : Answered
Chosen Option : C
B. It is difficult to transport.
Note: For this question, discrepancy is found in question/answer. Full Marks is being
awarded to all candidates.
Question ID : 630680393513
Status : Answered
Chosen Option : C
Q.24 In the design of steel beams, what is the significance of the term "plastic section modulus"?
Ans A. It measures the beam's ultimate bending capacity.
Question ID : 630680393595
Status : Not Answered
Chosen Option : --
Q.25 When designing reinforced brickwork, which design approach takes into account both the
ultimate strength and serviceability of the structure?
Ans A. Ultimate Load Method (ULM)
Question ID : 630680393545
Status : Answered
Chosen Option : C
Q.26 Which shape of steel beam cross-section is most commonly used in building construction
due to its efficiency in resisting bending moments?
Ans A. L-shaped
B. Circular
C. Rectangular
D. I-shaped (W-shape)
Question ID : 630680393601
Status : Answered
Chosen Option : D
Question ID : 630680393589
Status : Answered
Chosen Option : A
Q.28 What is the primary purpose of determining the plastic limit and liquid limit of soil in index
property testing?
Ans A. To classify the soil type
Question ID : 630680393517
Status : Answered
Chosen Option : A
Q.29 According to the Bureau of Indian Standards (BIS) classification, which type of soil is
denoted by the symbol "ML"?
Ans A. Clayey soil with low plasticity
Question ID : 630680393518
Status : Answered
Chosen Option : D
B. Clay
C. Gypsum
D. Sand
Question ID : 630680393483
Status : Answered
Chosen Option : A
Q.31 In index property testing, what is the plasticity index (PI) of a soil if its liquid limit (LL) is
30% and its plastic limit (PL) is 20%?
Ans A. 50%
B. 30%
C. 10%
D. 20%
Question ID : 630680393522
Status : Answered
Chosen Option : C
Q.32 In the design of RCC structures, what is the primary advantage of using the Limit State
Method (LSM) over the Working Stress Method (WSM)?
Ans A. LSM is simpler to apply.
Question ID : 630680393535
Status : Answered
Chosen Option : B
Q.33 To control the temperature, rise during hot weather concreting, which commonly used
admixture is added to the mix?
Ans A. Retarder
B. Air-entraining agent
C. Water-reducing agent
D. Accelerator
Question ID : 630680393585
Status : Answered
Chosen Option : A
Q.34 What is the unit of measurement typically used for expressing angles in compass
surveying?
Ans A. Hectares
B. Meters
C. Degrees
D. Seconds
Question ID : 630680393505
Status : Answered
Chosen Option : C
Q.35 In a reciprocating pump, which component is responsible for creating suction and discharge
strokes?
Ans A. Diffuser
B. Volute casing
C. Impeller
D. Piston
Question ID : 630680393534
Status : Answered
Chosen Option : D
Q.36 Which of the following is a common method for curing freshly placed concrete pavement?
Ans A. Spraying water onto the surface
Question ID : 630680393553
Status : Answered
Chosen Option : A
Q.37 Under the Limit State Method, which limit state is concerned with the safety and
serviceability of the structure under working loads?
Ans A. Serviceability limit state (SLS)
Question ID : 630680393588
Status : Not Answered
Chosen Option : --
Q.38 When determining the value of a property for valuation purposes, which factor primarily
considers the wear and tear of the building and its components over time?
Ans A. Cost value
B. Depreciation
C. Market value
D. Appreciation
Question ID : 630680393500
Status : Answered
Chosen Option : B
Q.39 What is the primary factor that determines the thermal conductivity of a construction
material?
Ans A. Color of the material
Note: For this question, discrepancy is found in question/answer. Full Marks is being
awarded to all candidates.
Question ID : 630680393492
Status : Answered
Chosen Option : D
Q.40 Which component of rail fastenings is responsible for securing the rail to the sleeper or tie?
Ans A. Ballast
B. Ballast mat
C. Spike
D. Fishplate
Question ID : 630680393554
Status : Answered
Chosen Option : D
Q.41 What type of structural element is typically used to provide fixed support at the ends of a
fixed beam?
Ans A. Rollers
B. Cantilevers
C. Rigid connections
D. Hinges
Question ID : 630680393579
Status : Answered
Chosen Option : C
Q.42 In the context of circular chimney analysis, what is the term for the distance between the
center of gravity of the cross-section and the axis of loading?
Ans A. Shear force
B. Torsional rigidity
C. Moment of inertia
D. Eccentricity
Question ID : 630680393573
Status : Answered
Chosen Option : D
Q.43 What is the main advantage of the moment distribution method in structural analysis
compared to other methods?
Ans A. It involves less computational effort compared to exact analytical methods for
certain types of structures.
B. It offers a simpler and more intuitive approach for analyzing indeterminate
structures.
C. It is exclusively suitable for analyzing statically determinate structures.
Question ID : 630680393572
Status : Not Answered
Chosen Option : --
Q.44 What does the continuity equation of flow describe in fluid mechanics?
Ans A. The conservation of energy in a fluid system
Question ID : 630680393533
Status : Answered
Chosen Option : B
Q.45 The pressure at a point in a fluid at rest is determined by which of the following factors?
Ans A. Temperature of the fluid
Note: For this question, discrepancy is found in question/answer. Full Marks is being
awarded to all candidates.
Question ID : 630680393526
Status : Answered
Chosen Option : D
Q.46 In bituminous pavement construction, what is the term for the process of compacting the
asphalt mix to achieve proper density and thickness?
Ans A. Compaction
B. Paving
C. Milling
D. Sealing
Question ID : 630680393555
Status : Answered
Chosen Option : D
Q.47 What is a septic tank typically used for in construction, and what affects its cost
estimation?
Ans A. Flooring; surface area
Question ID : 630680393503
Status : Not Answered
Chosen Option : --
Q.48 When designing tension members in steel structures, what is the primary limit state
considered for failure?
Ans A. Shear failure
B. Excessive deflection
Question ID : 630680393592
Status : Answered
Chosen Option : C
Q.49 What is the primary function of gusset plates in steel structures?
Ans A. To connect structural members and transfer loads
Question ID : 630680393594
Status : Answered
Chosen Option : A
Q.50 What is the primary consideration when choosing the type of concrete mix for axially loaded
RCC columns?
Ans A. Compressive strength
B. Aesthetic appearance
C. Workability
D. Tensile strength
Question ID : 630680393508
Status : Answered
Chosen Option : C
Q.51 What is the primary advantage of using crushed stone as a road construction material?
Ans A. It is eco-friendly and biodegradable.
Question ID : 630680393550
Status : Answered
Chosen Option : C
Question ID : 630680393510
Status : Not Answered
Chosen Option : --
Q.53 In tacheometric surveying, what is the purpose of the stadia hairs in the tacheometer?
Ans A. To intercept the stadia lines on the staff
Question ID : 630680393507
Status : Answered
Chosen Option : C
Q.54 In the design of compression members, what is the critical buckling mode that engineers
aim to prevent?
Ans A. Flexural buckling
B. Local buckling
D. Torsional buckling
Note: For this question, discrepancy is found in question/answer. Full Marks is being
awarded to all candidates.
Question ID : 630680393600
Status : Not Answered
Chosen Option : --
Q.55 The Mohr-Coulomb criterion is widely used to analyze the shear strength of which type of
materials?
Ans A. Soil
B. Wood
C. Concrete
D. Steel
Question ID : 630680393520
Status : Answered
Chosen Option : D
Q.56 Which term is used to describe the movement of water through the Earth's surface and
subsurface?
Ans A. Infiltration
B. Evaporation
C. Precipitation
D. Condensation
Question ID : 630680393537
Status : Answered
Chosen Option : A
Q.57 Which type of loading tends to create a bending moment in the dam structure, potentially
leading to failure?
Ans A. Tensile loading
B. Eccentric loading
C. Axial loading
D. Torsional loading
Question ID : 630680393577
Status : Answered
Chosen Option : B
Q.58 What is the main advantage of using surface water as a source of water supply?
Ans A. It requires less treatment
B. It is naturally purified
C. It is available year-round
Question ID : 630680393560
Status : Answered
Chosen Option : A
Q.59 When preparing cost estimates for items of work, what is the purpose of "abstracting"?
Ans A. To create abstract artwork for the project
Question ID : 630680393499
Status : Answered
Chosen Option : D
D. The value assigned by the local tax authority for taxation purposes
Question ID : 630680393494
Status : Answered
Chosen Option : D
Q.61 Which air pollutant is a colorless gas with a pungent odor and can cause respiratory
irritation?
Ans A. Carbon monoxide (CO)
D. Ammonia (NH3)
Note: For this question, discrepancy is found in question/answer. Full Marks is being
awarded to all candidates.
Question ID : 630680393568
Status : Answered
Chosen Option : D
Q.62 In the design of tension members, what is the primary factor that governs the selection of
the cross-sectional area?
Ans A. Length of the member
Question ID : 630680393593
Status : Not Answered
Chosen Option : --
B. A railway tunnel
D. The underlying ground and embankment on which the tracks are laid
Question ID : 630680393556
Status : Answered
Chosen Option : D
Q.64 How does local attraction affect compass surveying?
Ans A. It can lead to significant errors in angle measurements.
Question ID : 630680393504
Status : Answered
Chosen Option : A
B. Reciprocating pump
C. Pulsatile pump
Question ID : 630680393531
Status : Answered
Chosen Option : D
Q.66 In Ordinary Portland Cement (OPC), which grade is commonly used for construction in
aggressive environments with high sulfate content, such as coastal areas?
Ans A. Grade 63
B. Grade 33
C. Grade 43
D. Grade 53
Question ID : 630680393584
Status : Not Answered
Chosen Option : --
Q.67 Why is it important to follow the principle of "working from whole to part" in surveying?
Ans A. To simplify calculations
Question ID : 630680393514
Status : Answered
Chosen Option : B
Q.68 What type of failure is of primary concern in the design of axially loaded RCC columns?
Ans A. Buckling failure
B. Torsional failure
C. Shear failure
D. Axial failure
Note: For this question, discrepancy is found in question/answer. Full Marks is being
awarded to all candidates.
Question ID : 630680393539
Status : Answered
Chosen Option : A
Q.69 What is the purpose of environmental impact assessments (EIAs) in environmental
management?
Ans A. To promote environmental pollution
Question ID : 630680393569
Status : Answered
Chosen Option : B
Question ID : 630680393529
Status : Answered
Chosen Option : B
B. Sedimentation
C. Aeration
D. Filtration
Question ID : 630680393561
Status : Answered
Chosen Option : A
Q.72 What physical property of soil is defined as the ratio of the volume of voids to the total
volume of the soil sample?
Ans A. Porosity
B. Permeability
C. Cohesion
D. Specific gravity
Question ID : 630680393519
Status : Answered
Chosen Option : A
Q.73 Which sewage treatment process involves the use of microorganisms to break down
organic matter in wastewater?
Ans A. Disinfection
B. Biological treatment
C. Sedimentation
D. Filtration
Question ID : 630680393564
Status : Answered
Chosen Option : B
Q.74 What is the primary purpose of the shoulder in the cross-section of a highway?
Ans A. To provide a safe area for vehicles to stop in emergencies
Question ID : 630680393549
Status : Answered
Chosen Option : A
Q.75 Which type of truss is commonly used in roof structures and consists of a series of
triangles?
Ans A. Warren truss
B. K truss
C. Howe truss
D. Pratt truss
Question ID : 630680393575
Status : Not Answered
Chosen Option : --
B. Continuous flow
D. Low maintenance
Question ID : 630680393536
Status : Answered
Chosen Option : C
Q.77 Which of the following shapes is commonly used for steel compression members due to its
high load-carrying capacity?
Ans A. I-section
B. Circular
C. Rectangular
D. L-section
Question ID : 630680393596
Status : Answered
Chosen Option : A
Question ID : 630680393506
Status : Not Answered
Chosen Option : --
Q.79 In a typical truss structure subjected to vertical downward loads, what is the primary
function of the diagonal members that are inclined towards the direction of the applied
load?
Ans A. To distribute concentrated loads
Question ID : 630680393580
Status : Not Answered
Chosen Option : --
Q.80 In the design of steel beams, what is the primary purpose of lateral bracing?
Ans A. To enhance ductility
Question ID : 630680393597
Status : Answered
Chosen Option : D
Q.81 What is the significance of estimating the cost of "flooring work" in a construction project?
Ans A. It calculates the project's overall duration.
Question ID : 630680393497
Status : Answered
Chosen Option : D
Question ID : 630680393493
Status : Answered
Chosen Option : C
B. Glass containers
C. Food scraps
D. Lead-acid batteries
Question ID : 630680393566
Status : Answered
Chosen Option : D
Q.84 In soil mechanics, what does "active earth pressure" refer to?
Ans A. The pressure at the base of a building's foundation
Question ID : 630680393523
Status : Answered
Chosen Option : C
B. To treat wastewater
Question ID : 630680393567
Status : Answered
Chosen Option : A
Q.86 Which parameter is typically used to represent the degree of deformation or deflection in a
structure?
Ans A. Deflection
B. Torsional rigidity
C. Shear force
D. Elastic modulus
Question ID : 630680393574
Status : Answered
Chosen Option : D
Question ID : 630680393501
Status : Answered
Chosen Option : A
Q.88 What instrument is commonly used to measure rainfall intensity and total rainfall over time?
Ans A. Anemometer
B. Barometer
C. Hydrometer
D. Rain gauge
Question ID : 630680393538
Status : Answered
Chosen Option : D
Q.89 In open channel flow, what is the term for the depth of flow relative to the channel bottom?
Ans A. Draft
B. Conduit
C. Freeboard
D. Froude number
Note: For this question, discrepancy is found in question/answer. Full Marks is being
awarded to all candidates.
Question ID : 630680393532
Status : Not Answered
Chosen Option : --
D. Reduced workability
Question ID : 630680393586
Status : Answered
Chosen Option : B
Q.91 In the design of steel beams, what parameter helps determine the appropriate section
modulus for a given loading condition?
Ans A. Axial load
B. Torsional moment
C. Bending moment
D. Shear force
Question ID : 630680393602
Status : Answered
Chosen Option : A
Q.92 What is the primary purpose of adding chlorine or chloramine during the water purification
process?
Ans A. To adjust pH levels
B. To reduce turbidity
Question ID : 630680393562
Status : Answered
Chosen Option : C
Q.93 What is the primary objective of the moment distribution method in structural analysis?
Ans A. To determine reaction forces
Question ID : 630680393571
Status : Answered
Chosen Option : B
Q.94 What aspect of canal design does Lacey's theory of uniform flow primarily address?
Ans A. Canal lining
B. Canal slope
D. Canal width
Question ID : 630680393542
Status : Not Answered
Chosen Option : --
Q.95 What is the primary advantage of lining a canal with impermeable materials like concrete or
plastic?
Ans A. To prevent water loss due to seepage
Question ID : 630680393544
Status : Answered
Chosen Option : A
Question ID : 630680393487
Status : Answered
Chosen Option : B
Q.97 Pascal's law states that in a fluid at rest, any change in pressure applied at one point is:
Ans A. Transmitted only in the horizontal direction
Question ID : 630680393528
Status : Answered
Chosen Option : B
Q.98 In the context of sustainable construction, which material selection criterion aims to
minimize the environmental impact by using locally available materials?
Ans A. Flexural strength
B. Aesthetic appeal
C. Embodied energy
D. Thermal conductivity
Question ID : 630680393486
Status : Not Answered
Chosen Option : --
Q.99 Which geometric parameter of railway tracks is crucial for ensuring smooth train operation
and passenger comfort?
Ans A. Ballast size
B. Track gauge
D. Train length
Question ID : 630680393557
Status : Answered
Chosen Option : A
Q.100 In a detailed cost estimate, what component primarily includes the cost of labor, materials,
and equipment for each construction activity?
Ans A. Contingency cost
B. Indirect cost
C. Direct cost
D. Overhead cost
Question ID : 630680393502
Status : Answered
Chosen Option : C
Q.101 The standard consistency test for cement determines the amount of water required to
achieve a standard consistency paste, which is defined as having a penetration of:
Ans A. 10 mm
B. 30 mm
C. 20 mm
D. 40 mm
Note: For this question, discrepancy is found in question/answer. Full Marks is being
awarded to all candidates.
Question ID : 630680393583
Status : Answered
Chosen Option : B
Question ID : 630680393509
Status : Answered
Chosen Option : B
Q.103 What factor primarily affects the compaction of soil during construction?
Ans A. Soil color
B. Soil density
C. Soil composition
Question ID : 630680393525
Status : Answered
Chosen Option : D
Q.104 What is the primary function of gypsum in cement production?
Ans A. To slow down the setting time of cement
Question ID : 630680393490
Status : Answered
Chosen Option : A
Q.105 Which term refers to the slope of a structure at a particular point along its length?
Ans A. Flexural rigidity
B. Shear force
C. Bending moment
D. Angular displacement
Question ID : 630680393576
Status : Answered
Chosen Option : D
Q.106 To mitigate the effects of cold weather on concrete during mixing, what common practice is
employed to achieve a higher initial temperature of the concrete mix?
Ans A. Insulating mixing equipment
B. Preheating aggregates
Question ID : 630680393591
Status : Answered
Chosen Option : C
Q.107 What is the primary purpose of secondary sewage treatment in wastewater management?
Ans A. To further break down and remove organic matter
Question ID : 630680393565
Status : Answered
Chosen Option : A
Q.108 Concrete mix design involves determining the proportions of various ingredients to achieve
the desired concrete properties, including:
Ans A. Thermal conductivity
C. Elastic modulus
Question ID : 630680393590
Status : Answered
Chosen Option : B
Q.109 Which type of bricks are known for their high resistance to heat and are commonly used in
the construction of fireplaces and chimneys?
Ans A. Hollow bricks
B. Fire bricks
C. Perforated bricks
Question ID : 630680393489
Status : Answered
Chosen Option : D
Q.110 Which material property is associated with a material's ability to deform significantly
without fracturing when subjected to a load?
Ans A. Brittleness
B. Elasticity
C. Ductility
D. Hardness
Question ID : 630680393484
Status : Answered
Chosen Option : C
Q.111 What type of rocks are typically formed from the cooling and solidification of molten
magma?
Ans A. Fossils
B. Sedimentary rocks
C. Metamorphic rocks
D. Igneous rocks
Question ID : 630680393511
Status : Answered
Chosen Option : D
Question ID : 630680393587
Status : Answered
Chosen Option : C
Q.113 Which water quality parameter indicates the presence of disease-causing microorganisms
in water?
Ans A. Coliform bacteria
B. Conductivity
C. Total hardness
D. Alkalinity
Question ID : 630680393559
Status : Answered
Chosen Option : A
Q.114 Why is irrigation necessary for agriculture in many regions?
Ans A. To increase soil erosion
Question ID : 630680393541
Status : Answered
Chosen Option : B
Q.115 In construction, what is the primary purpose of the "centerline method" used in detailed
estimates?
Ans A. To determine the total project duration
D. To calculate the quantities and costs of various items along the centerline of a
structure
Question ID : 630680393495
Status : Answered
Chosen Option : D
Q.116 Which property of building stone is typically assessed to determine its suitability for
construction?
Ans A. Color
B. Taste
C. Odor
D. Hardness
Question ID : 630680393488
Status : Answered
Chosen Option : D
Q.117 When selecting construction materials for a building in a seismic zone, which property
should be prioritized to ensure structural safety?
Ans A. Young's modulus of elasticity
B. Thermal conductivity
Question ID : 630680393485
Status : Answered
Chosen Option : D
Q.118 In rate analysis, which type of cost includes expenses like labor wages, equipment rental,
and construction materials?
Ans A. Direct cost
B. Fixed cost
C. Indirect cost
D. Variable cost
Question ID : 630680393496
Status : Answered
Chosen Option : B
Q.119 Which equation is commonly used to calculate major head loss in a straight pipe due to
friction?
Ans A. Bernoulli's equation
B. Hazen-Williams equation
C. Darcy-Weisbach equation
D. Poiseuille's equation
Question ID : 630680393530
Status : Answered
Chosen Option : C
Q.120 In soil mechanics, what is the primary factor that affects the permeability of a soil?
Ans A. Soil texture and particle size
Question ID : 630680393524
Status : Answered
Chosen Option : A