Professional Documents
Culture Documents
OF
EIGA PUBLICATIONS
Disclaimer
All technical publications of EIGA or under EIGA's name, including Codes of practice, Safety procedures and
any other technical information contained in such publications were obtained from sources believed to be
reliable and are based on technical information and experience currently available from members of EIGA
and others at the date of their issuance.
While EIGA recommends reference to or use of its publications by its members, such reference to or use of
EIGA's publications by its members or third parties are purely voluntary and not binding.
Therefore, EIGA or its members make no guarantee of the results and assume no liability or responsibility in
connection with the reference to or use of information or suggestions contained in EIGA's publications.
EIGA has no control whatsoever as regards, performance or non performance, misinterpretation, proper or
improper use of any information or suggestions contained in EIGA's publications by any person or entity
(including EIGA members) and EIGA expressly disclaims any liability in connection thereto.
EIGA's publications are subject to periodic review and users are cautioned to obtain the latest edition.
Doc. 02/03 Job motivation and safe operations in cylinder filling SAG
stations
Doc. 4/00 Fire hazards of oxygen and oxygen enriched atmospheres SAG
Doc. 11/82 Code of practice for the design and operation of centrifugal WG-3
liquid oxygen pumps
Doc. 43/01 Hazards associated with the use of activated charcoal WG-6
cryogenic purifiers
Doc. 62/05 Methods to avoid and detect internal gas cylinder corrosion WG-2
Doc. 70/99 Carbon dioxide source certification, quality standards and WG-8
verification
Doc. 73/00 High pressure breathing gas systems - toxicity risks of WG-7
using non metallic materials
Doc. 76/01 CO2 specification guide for analytical steps and WG-8
frequencies
Doc. 78/01 Leak detection fluids use with gas cylinder packages WG-2
Doc. 83/02 Recommendations for safe filling of CO2 cylinders and WG-8
bundles
Doc. 85/02 Noise Management for the Industrial Gases Industry WG-5
Doc. 89/06 Safe use of medical oxygen systems for supply to patients WG-10
with respiratory disease
Doc. 91/03 Use of pressure relief devices for gas cylinders WG-2
Doc. 93/03 Safety features of portable cryogenic liquid containers for SAG
industrial and medical gases
Doc. 99/03 Good manufacturing practice guide for medicinal gases WG-7
Doc. 101/03 The carbon dioxide industry and the environment WG-5
Doc. 104/03 Safety principles for pressure regulators for medical WG-7
oxygen cylinders
Doc. 111/03 Environmental impacts of carbon dioxide and dry ice WG-5
production
Doc. 124/04 300 bar high strength seamless steel gas cylinders WG-2
Doc. 125/04 Guide to the supply of gases for use in foods WG-8
Doc. 127/04 Bulk liquid oxygen, nitrogen and argon storage systems at WG-3
production sites
Doc. 128/04 Design and operation of vehicles used in medical oxygen WG-7
homecare deliveries
Doc. 130/05 Principles for the safe handling and distribution of highly WG-4
toxic gases and mixtures
EIGA 702/04 Safe use of brazed aluminium heat exchangers for WG-3
producing pressurized oxygen
EIGA 704/05 Safe practices guide for cryogenic air separation plants WG-3
Info 7/00 The use of safety belts: buckle up, it makes sense
NL 80/05/F Les dangers liés aux arrêts sur les autoroutes / Accidents
liés aux systèmes d’anti-arrachement de flexibles