Professional Documents
Culture Documents
Project Data: Project Name Project Number Author Description Date 04-Nov-23 Design Code EN
Project Data: Project Name Project Number Author Description Date 04-Nov-23 Design Code EN
Project no:
Author:
Project data
Project name
Project number
Author
Description
Date 04-Nov-23
Design code EN
Material
Steel S 355, S 235
Concrete C25/30
1 / 24
Project:
Project no:
Author:
Design
Name Base plate connection type 2
Description
Analysis Stress, strain/ simplified loading
2 / 24
Project:
Project no:
Author:
3 / 24
Project:
Project no:
Author:
Cross-sections
Name Material
13 -
S 235
I100x55x4.5x.6.5(Iw100x55)
Cross-sections
Name Material Drawing
13 -
S 235
I100x55x4.5x.6.5(Iw100x55)
Anchors
Diameter fu Gross area
Name Bolt assembly
[mm] [MPa] [mm2]
M12 4.6 M12 4.6 12 400.0 113
4 / 24
Project:
Project no:
Author:
Foundation block
Item Value Unit
CB 1
Dimensions 1180 x 200 mm
Depth 200 mm
Anchor M12 4.6
Anchoring length 100 mm
Shear force transfer Friction
Check
Summary
Name Value Status
Analysis 100.0% OK
Plates 0.0 < 5.0% OK
Anchors 93.8 < 100% OK
Welds 83.1 < 100% OK
Concrete block 31.5 < 100% OK
Shear 16.6 < 100% OK
Buckling Not calculated
Plates
Thickness σEd εPl σcEd
Name Loads Status
[mm] [MPa] [%] [MPa]
COL-tfl 1 6.5 LE1 114.6 0.0 0.0 OK
COL-bfl 1 6.5 LE1 183.3 0.0 0.0 OK
COL-w 1 4.5 LE1 65.6 0.0 0.0 OK
BP1 10.0 LE1 100.4 0.0 0.0 OK
Design data
fy εlim
Material
[MPa] [%]
S 235 235.0 5.0
5 / 24
Project:
Project no:
Author:
6 / 24
Project:
Project no:
Author:
Anchors
NEd VEd NRd,c VRd,cp Utt Uts Utts
Shape Item Loads Status
[kN] [kN] [kN] [kN] [%] [%] [%]
A5 LE1 5.4 0.0 14.3 36.5 93.8 0.0 90.9 OK
Design data
NRd,s VRd,s
Grade
[kN] [kN]
M12 4.6 - 1 14.3 12.1
7 / 24
Project:
Project no:
Author:
γM s
= 14.3 kN ≥ NEd =
5.4 kN
NRk,s = c ⋅ As ⋅ fuk =
28.7 kN
Where:
c = 0.85 – reduction factor for cut thread
As = 84 mm2
– tensile stress area
fuk = 400.0 MPa – minimum tensile strength of the bolt
γM s = 1.2 ⋅ ffuk
yk
≥ 1.4 , where:
8 / 24
Project:
Project no:
Author:
NRk,c
NRd,c =
γM c
0 Ac,N
NRk,c = NRk,c
⋅
A0c,N
⋅ ψs,N ⋅ ψre,N ⋅ ψec,N ⋅ ψM ,N =
25.7 kN
Where:
NEd,g = 13.4 kN – sum of tension forces of anchors with common concrete breakout cone area
0
NRk,c = 38.5 kN – characteristic strength of a fastener, remote from the effects of adjacent fasteners or edges of the
concrete member
0 = k1 ⋅ fc′ ⋅ h1.5
NRk,c ef , where:
ca,max = 540 mm – maximum distance from the anchor to one of the three closest edges
Ac,N = 80000 mm2 – concrete breakout cone area for group of anchors
A0c,N = 90000 mm2 – concrete breakout cone area for single anchor not influenced by edges
ψs,N = 0.80 – parameter related to the distribution of stresses in the concrete due to the proximity of the fastener to an
c
ψs,N = 0.7 + 0.3 ⋅ 1.5⋅h
ef
≤ 1 , where:
ψec,N = 0.94 – modification factor for anchor groups loaded eccentrically in tension:
ψecx,N = 2⋅e1 x,N = 1.00 – modification factor that depends on eccentricity in x-direction
1+
3⋅hef
ψecy,N = 2⋅e1 y,N = 0.94 – modification factor that depends on eccentricity in y-direction
1+
3⋅hef
ψM ,N = 1.00 – parameter accounting for the effect of a compression force between the fixture and concrete; this
parameter is equal to 1 if c < 1.5hef or the ratio of the compressive force (including the compression due
to bending) to the sum of tensile forces in anchors is smaller than 0.8
9 / 24
Project:
Project no:
Author:
2⋅z
ψM ,N = 2 − 3⋅hef
≥ 1 , where:
γM s
0
VRk,s = k7 ⋅ VRk,s =
20.2 kN
Where:
k7 = 1.00 – coefficient for anchor steel ductility
k7 = {
0.8, A < 0.08
, where:
1.0, A ≥ 0.08
0
VRk,s = 20.2 kN – the characteristic shear strength
0
VRk,s = k6 ⋅ As ⋅ fuk , where:
VRk,cp
VRd,cp =
γM c
VRk,cp = k8 ⋅ NRk,c =
54.8 kN
Where:
k8 = 2.00 – factor taking into account fastener embedment depth
NRk,c = 27.4 kN – characteristic concrete cone strength for a single fastener or fastener in a group
Interaction of tensile and shear forces in steel (EN 1992-4 - Table 7.3)
2 2
( NNRd,s
Ed
) + ( VVRd,s
Ed
) =
0.14 ≤ 1.0
Where:
NEd = 5.4 kN – design tension force
10 / 24
Project:
Project no:
Author:
Interaction of tensile and shear forces in concrete (EN 1992-4 - Table 7.3)
( NNRd,i
Ed
)1.5 + ( VVRd,i
Ed
)1.5 =
0.91 ≤ 1.0
Where:
NEd
– the largest utilization value for tension failure modes
NRd,i
VEd
– the largest utilization value for shear failure modes
VRd,i
NEd,g
NRd,c
= 93% – concrete breakout failure of anchor in tension
NEd
NRd,p
= 0% – concrete pullout failure
NEd
NRd,cb
= 0% – concrete blowout failure
VEd
VRd,c
= 0% – concrete edge failure
VEd
VRd,cb
= 0% – concrete pryout failure
γM s
NRk,s = c ⋅ As ⋅ fuk =
28.7 kN
Where:
c = 0.85 – reduction factor for cut thread
As = 84 mm2
– tensile stress area
fuk = 400.0 MPa – minimum tensile strength of the bolt
γM s = 1.2 ⋅ ffuk
yk
≥ 1.4 , where:
11 / 24
Project:
Project no:
Author:
NRk,c
NRd,c =
γM c
0 Ac,N
NRk,c = NRk,c
⋅
A0c,N
⋅ ψs,N ⋅ ψre,N ⋅ ψec,N ⋅ ψM ,N =
25.7 kN
Where:
NEd,g = 13.4 kN – sum of tension forces of anchors with common concrete breakout cone area
0
NRk,c = 38.5 kN – characteristic strength of a fastener, remote from the effects of adjacent fasteners or edges of the
concrete member
0 = k1 ⋅ fc′ ⋅ h1.5
NRk,c ef , where:
ca,max = 540 mm – maximum distance from the anchor to one of the three closest edges
Ac,N = 80000 mm2 – concrete breakout cone area for group of anchors
A0c,N = 90000 mm2 – concrete breakout cone area for single anchor not influenced by edges
ψs,N = 0.80 – parameter related to the distribution of stresses in the concrete due to the proximity of the fastener to an
c
ψs,N = 0.7 + 0.3 ⋅ 1.5⋅h
ef
≤ 1 , where:
ψec,N = 0.94 – modification factor for anchor groups loaded eccentrically in tension:
ψecx,N = 2⋅e1 x,N = 1.00 – modification factor that depends on eccentricity in x-direction
1+
3⋅hef
ψecy,N = 2⋅e1 y,N = 0.94 – modification factor that depends on eccentricity in y-direction
1+
3⋅hef
ψM ,N = 1.00 – parameter accounting for the effect of a compression force between the fixture and concrete; this
parameter is equal to 1 if c < 1.5hef or the ratio of the compressive force (including the compression due
to bending) to the sum of tensile forces in anchors is smaller than 0.8
12 / 24
Project:
Project no:
Author:
2⋅z
ψM ,N = 2 − 3⋅hef
≥ 1 , where:
γM s
0
VRk,s = k7 ⋅ VRk,s =
20.2 kN
Where:
k7 = 1.00 – coefficient for anchor steel ductility
k7 = {
0.8, A < 0.08
, where:
1.0, A ≥ 0.08
0
VRk,s = 20.2 kN – the characteristic shear strength
0
VRk,s = k6 ⋅ As ⋅ fuk , where:
VRk,cp
VRd,cp =
γM c
VRk,cp = k8 ⋅ NRk,c =
54.8 kN
Where:
k8 = 2.00 – factor taking into account fastener embedment depth
NRk,c = 27.4 kN – characteristic concrete cone strength for a single fastener or fastener in a group
Interaction of tensile and shear forces in steel (EN 1992-4 - Table 7.3)
2 2
( NNRd,s
Ed
) + ( VVRd,s
Ed
) =
0.31 ≤ 1.0
Where:
NEd = 8.0 kN – design tension force
13 / 24
Project:
Project no:
Author:
Interaction of tensile and shear forces in concrete (EN 1992-4 - Table 7.3)
( NNRd,i
Ed
)1.5 + ( VVRd,i
Ed
)1.5 =
0.91 ≤ 1.0
Where:
NEd
– the largest utilization value for tension failure modes
NRd,i
VEd
– the largest utilization value for shear failure modes
VRd,i
NEd,g
NRd,c
= 93% – concrete breakout failure of anchor in tension
NEd
NRd,p
= 0% – concrete pullout failure
NEd
NRd,cb
= 0% – concrete blowout failure
VEd
VRd,c
= 0% – concrete edge failure
VEd
VRd,cb
= 0% – concrete pryout failure
γM s
NRk,s = c ⋅ As ⋅ fuk =
28.7 kN
Where:
c = 0.85 – reduction factor for cut thread
As = 84 mm2
– tensile stress area
γM s = 1.2 ⋅ ffuk
yk
≥ 1.4 , where:
14 / 24
Project:
Project no:
Author:
γM s
0
VRk,s = k7 ⋅ VRk,s =
20.2 kN
Where:
k7 = 1.00 – coefficient for anchor steel ductility
k7 = {
0.8, A < 0.08
, where:
1.0, A ≥ 0.08
0
VRk,s = 20.2 kN – the characteristic shear strength
0
VRk,s = k6 ⋅ As ⋅ fuk , where:
VRk,cp
VRd,cp =
γM c
VRk,cp = k8 ⋅ NRk,c =
54.8 kN
Where:
k8 = 2.00 – factor taking into account fastener embedment depth
NRk,c = 27.4 kN – characteristic concrete cone strength for a single fastener or fastener in a group
Interaction of tensile and shear forces in steel (EN 1992-4 - Table 7.3)
2 2
( NNRd,s
Ed
) + ( VVRd,s
Ed
) =
0.00 ≤ 1.0
Where:
NEd = 0.0 kN – design tension force
15 / 24
Project:
Project no:
Author:
Interaction of tensile and shear forces in concrete (EN 1992-4 - Table 7.3)
( NNRd,i
Ed
)1.5 + ( VVRd,i
Ed
)1.5 =
0.00 ≤ 1.0
Where:
NEd
– the largest utilization value for tension failure modes
NRd,i
VEd
– the largest utilization value for shear failure modes
VRd,i
NEd,g
NRd,c
= 0% – concrete breakout failure of anchor in tension
NEd
NRd,p
= 0% – concrete pullout failure
NEd
NRd,cb
= 0% – concrete blowout failure
VEd
VRd,c
= 0% – concrete edge failure
VEd
VRd,cb
= 0% – concrete pryout failure
γM s
NRk,s = c ⋅ As ⋅ fuk =
28.7 kN
Where:
c = 0.85 – reduction factor for cut thread
As = 84 mm2
– tensile stress area
γM s = 1.2 ⋅ ffuk
yk
≥ 1.4 , where:
16 / 24
Project:
Project no:
Author:
γM s
0
VRk,s = k7 ⋅ VRk,s =
20.2 kN
Where:
k7 = 1.00 – coefficient for anchor steel ductility
k7 = {
0.8, A < 0.08
, where:
1.0, A ≥ 0.08
0
VRk,s = 20.2 kN – the characteristic shear strength
0
VRk,s = k6 ⋅ As ⋅ fuk , where:
VRk,cp
VRd,cp =
γM c
VRk,cp = k8 ⋅ NRk,c =
54.8 kN
Where:
k8 = 2.00 – factor taking into account fastener embedment depth
NRk,c = 27.4 kN – characteristic concrete cone strength for a single fastener or fastener in a group
Interaction of tensile and shear forces in steel (EN 1992-4 - Table 7.3)
2 2
( NNRd,s
Ed
) + ( VVRd,s
Ed
) =
0.00 ≤ 1.0
Where:
NEd = 0.0 kN – design tension force
17 / 24
Project:
Project no:
Author:
Interaction of tensile and shear forces in concrete (EN 1992-4 - Table 7.3)
( NNRd,i
Ed
)1.5 + ( VVRd,i
Ed
)1.5 =
0.00 ≤ 1.0
Where:
NEd
– the largest utilization value for tension failure modes
NRd,i
VEd
– the largest utilization value for shear failure modes
VRd,i
NEd,g
NRd,c
= 0% – concrete breakout failure of anchor in tension
NEd
NRd,p
= 0% – concrete pullout failure
NEd
NRd,cb
= 0% – concrete blowout failure
VEd
VRd,c
= 0% – concrete edge failure
VEd
VRd,cb
= 0% – concrete pryout failure
Design data
βw σw,Rd 0.9 σ
[-] [MPa] [MPa]
S 235 0.80 360.0 259.2
where:
fu = 360.0 MPa – Ultimate strength
Stress utilization
σ ∣σ⊥ ∣
Ut = max( σw,Ed ; )= 63.2 %
w,Rd
σ⊥,Rd
18 / 24
Project:
Project no:
Author:
where:
fu = 360.0 MPa – Ultimate strength
βw = 0.80
– appropriate correlation factor taken from Table 4.1
Stress utilization
σ ∣σ⊥ ∣
Ut = max( σw,Ed ; )= 58.1 %
w,Rd
σ⊥,Rd
where:
fu = 360.0 MPa – Ultimate strength
βw = 0.80
– appropriate correlation factor taken from Table 4.1
Stress utilization
σ ∣σ⊥ ∣
Ut = max( σw,Ed ; )= 64.9 %
w,Rd
σ⊥,Rd
where:
fu = 360.0 MPa – Ultimate strength
βw = 0.80
– appropriate correlation factor taken from Table 4.1
Stress utilization
σ ∣σ⊥ ∣
Ut = max( σw,Ed ; )= 83.1 %
w,Rd
σ⊥,Rd
19 / 24
Project:
Project no:
Author:
⊥
∥
31.8 MPa
where:
fu = 360.0 MPa – Ultimate strength
βw = 0.80
– appropriate correlation factor taken from Table 4.1
γM 2 = 1.25 – Safety factor
Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
w,Rd
;
σ⊥,Rd
)= 8.8 %
⊥
∥
44.4 MPa
where:
fu = 360.0 MPa – Ultimate strength
βw = 0.80
– appropriate correlation factor taken from Table 4.1
γM 2 = 1.25 – Safety factor
Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
w,Rd
;
σ⊥,Rd
)= 12.3 %
Concrete block
c Aeff σ kj Fjd Ut
Item Loads Status
[mm] [mm2] [MPa] [-] [MPa] [%]
20 / 24
Project:
Project no:
Author:
where:
N = 32.5 kN – Design normal force
Aef f = 5070 mm2 – Effective area, on which the column force N is distributed
βj = 0.67
– Joint coefficient βj
kj = 1.82
– Concentration factor
γc = 1.50
– Safety factor
Stress utilization
σ
Ut =
Fjd
= 31.5 %
VRd,y = N Cf =
8.1 kN
VRd,z = N Cf =
8.1 kN
where:
N = 32.5 kN – Design normal force
Cf = 0.25 – Friction coefficient
Utilization in shear
2 2
V y 2 +V z 2 V y 2 +V z 2
Ut = max( , )= 16.6 %
VRd,y
VRd,z
Buckling
Buckling analysis was not calculated.
21 / 24
Project:
Project no:
Author:
Bill of material
Manufacturing operations
Plates Welds Length
Name Shape Nr. Bolts Nr.
[mm] [mm] [mm]
Welds
Throat thickness Leg size Length
Type Material
[mm] [mm] [mm]
Double fillet S 235 3.0 4.2 197.0
Anchors
Length Drill length
Name Count
[mm] [mm]
M12 4.6 110 100 4
Drawing
BP1
P10.0x200-200 (S 235)
22 / 24
Project:
Project no:
Author:
Symbol explanation
Symbol Symbol explanation
εPl Strain
σEd Eq. stress
fy Yield strength
εlim Limit of plastic strain
NEd Tension force
VEd Resultant of shear forces Vy, Vz in bolt
NRd,c Concrete cone breakout resistance in tension - EN1992-4 - Cl. 7.2.1.4
VRd,cp Concrete pryout resistance - EN1992-4 - Cl. 7.2.2.4
Utt Utilization in tension
Uts Utilization in shear
Utts Utilization in tension and shear EN 1993-1-8 table 3.4
NRd,s Design tensile resistance of a fastener in case of steel failure - EN1992-4 - Cl. 7.2.1.3
VRd,s Design shear resistance in case of steel failure - EN1992-4 - Cl.7.2.2.3.1
σw,Ed Equivalent stress
σw,Rd Equivalent stress resistance
σ⏊ Perpendicular stress
τ|| Shear stress parallel to weld axis
τ⏊ Shear stress perpendicular to weld axis
0.9 σw,Rd Perpendicular stress resistance - 0.9*fu/γM2
βw Corelation factor EN 1993-1-8 tab. 4.1
Ut Utilization
Utc Weld capacity utilization
c Bearing width
Aeff Effective area
σ Average stress in concrete
kj Concentration factor
Vy Shear force in base plate Vy
Vz Shear force in base plate Vz
VRd,y Shear resistance
VRd,z Shear resistance
Code settings
Item Value Unit Reference
γM0 1.00 - EN 1993-1-1: 6.1
γM1 1.00 - EN 1993-1-1: 6.1
γM2 1.25 - EN 1993-1-1: 6.1
γM3 1.25 - EN 1993-1-8: 2.2
γC 1.50 - EN 1992-1-1: 2.4.2.4
23 / 24
Project:
Project no:
Author:
24 / 24