Professional Documents
Culture Documents
DETAIL B
3 Cables Fed Through Cable Gland
2X Grounding Lockable
POLE BRACKET REAR Lugs and Terminals Hinged Cover
Note:
GROUND
ETHERNET
J1
2X 2X Cable
RJ45 Jacks Grommets 200SSD SUPPRESSOR 600SSD SUPPRESSOR
Used with Gigabit Ports All wires must exit
L-COM (optional) Optional if Gigabit Ethernet iis used through the allocated slots
Used with
Gigabit Ethernet Connection
IN N L
convert
Input
Output
power -one-
AUX 2
AUX 1
+ + - - + + - -
select
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
OUT Output
+ + - - + + - -
AUX 2
AUX 1
N L
Input
56 VDC Pwr DC CMM4 VDC POWER SUPPLY 56 VDC Pwr Supply Per AC
Black Red
TOTAL 20 VDC Green
ACCESSORY POWER Twist wire pair 1 twist per inch and
IS NOT TO EXCEED
GND
PWR
form three loops around ferrite core
20 WATTS. for RF emission compliance.
EtherWAN Switch
Short wire to ChassisGround ( Power Port View )
ACCESSORY POWER
OUTPUTS at Switch mounting screw
NOTE:
for RF emission compliance. Refer to the System User Guide for
+20 V +20 V the power requirement of the switch
OUTPUT OUTPUT
specific to the switch part number.
GND (Black) REDUNDANT REDUNDANT
+V (Red) +29 V +29 V +56 V +56 V
INPUT INPUT INPUT INPUT
GND GND +V GND GND +V
+V GND +V GND +V GND +V GND PE
EXTERNAL
PROTECTIVE EARTH
GROUND
CMM4 CONTROLLER ( Power Port View )
+29 V +56 V
EtherWAN Switch
OUTPUT OUTPUT ( Ethernet Port View )
Red Green
RS232
1 3 5 7 9 11
ETHERNET PWR
OR
2 4 6 8 10 12 13 14
DEFAULT
ACTIVITY
SYNC OK
POWER
GPS_M
Red Green
1000 BaseT 1000 BaseT
LINK
+29 V +56 V
DEFAULT OUTPUT OUTPUT (Gigabit Ethernet Ports)
NORMAL