Professional Documents
Culture Documents
250 kW CONTINUOUS
ELECTRICAL POWER
WITH OPTIONAL
INTEGRATED HEAT
RECOVERY
ELECTRICAL PERFORMANCE*
CHARACTERISTIC SPECIFICATION Nominal Heat Rate (HHV)
KEY FEATURES 12,645 Btu/kWh (13.3 MJ/kWh)
Electrical efficiency (± 2 pts) 30% LHV without gas booster w/o gas booster
Electrical power ( ± 15 kW) 250 kW nominal 13,080 Btu/kWh (13.8 MJ/kWh)
• High system efficiency w/ gas booster
• Synchronous generator
ideal for off-grid -18 -7 4 16 27 38 49 C° Nominal Heat Rate (LHV)
310
applications 11,380 Btu/kWh (12.0 MJ/kWh)
• Grid-parallel, grid isolated
290 33% w/o gas booster
270 32% 11,770 Btu/kWh (12.4 MJ/kWh)
or dual-mode operation w/ gas booster
EFFICIENCY LHV
250
Power 31%
• Low emissions exceed
POWER kWe
Power: reliable, clean, and simple. Contact Flex Energy Solutions today at +1 720-573-7664 or Info@FlexEnergy.com to request a consultation.
71000098 REV A
HEAT OUTPUT RECOVERABLE TO WATER HEAT RECOVERY*
INLET WATER TEMPERATURE °C CHARACTERISTIC SPECIFICATION
10 21 32 43 54 66 77 88
100 379 Recuperator Exhaust temp (w/o HRU) 493°F (256°C)
90 341 Engine air flow 4.7 lb/s (2.13 kg/s)
3,700 scfm (5950 Nm3/h)
308 Btu/h
337 Btu/h
kW /h
kW u/h
322 Btu/h
352 Btu/h
kW /h
293 tu/h
Max water flow 100 gpm (379 lpm)
366 MBtu
WATER FLOW RATE
381 B tu
396 MBt
kW
kW
kW
kW
kW
MB
MM
70 265
MM
MM
MM
MM
5M
5M
Max inlet water pressure 125 psig (862 kPa)
1M
1.05
1.15
1.3
1.2
1.1
1.3
1.2
60 227
Max outlet water temp 205°F (96°C)
50 189 * At ISO Conditions (59°F [15°C], sea level, 60% RH) unless otherwise noted
40 151
FUEL REQUIREMENTS*
30 114
Damper partially CHARACTERISTIC SPECIFICATION
20 closed in this region 76
Heat Recovery less than 1 MMBtu/h (293 kW) Inlet pressure
10 38 -with gas booster 4” (100 mm) WC to 1 psig (6.9 kPa)
30 50 70 90 110 130 150 170 190 -without gas booster 80 to 140 psig (551 to 965 kPa)
INLET WATER TEMPERATURE °F
Min temperature* 35°F (2°C)
Note: Heat Recovery Unit (HRU) at ISO conditions, damper fully open, ± 15%
Max temp.
PHYSICAL SPECIFICATIONS -with gas booster 115°F (46°C)
-without gas booster 175°F (79°C)
250SW Model** 325 to 600 WI Btu/ft3
low caloric value gas, level 1 12.1 to 22.3 WI MJ/m3
250ST Model** 500 to 970 WI Btu/ft3
low caloric value gas, level 2 18.6 to 36.1 WI MJ/m3
250SM Model** 800 to 1,900 WI Btu/ft3
medium / high caloric value gas 29.8 to 70.7 WI MJ/m3
* Fuel consumption based at ISO conditions
** Or 18°F (10°C) dewpoint suppression, whichever is greater
WI - Wobbe Index Lower heating value (LHV)
Standard 60 dB(A) @ 10 m
TURBINE
Low sound option (not available 57 dB(A) @ 10 m FUEL
on all models)
AIR INLET
©2024 FlexEnergy Solutions. This document comprises a general overview of the products or services described herein. It is solely for informational purposes, does not represent a warranty of the information
contained herein and is not to be construed as an offer to sell or solicitation to buy. Contact FlexEnergy Solutions for detailed product, design, and engineering information suitable to your specific applications.
FlexEnergy Solutions reserves the right to modify its products and related product information at any time without prior notice.
Power: reliable, clean, and simple. Contact Flex Energy Solutions today at +1 720-573-7664 or Info@FlexEnergy.com to request a consultation.
71000098 REV C