Professional Documents
Culture Documents
Product information
Thickness (mm) 9 12
Tile modular size (mm) 600 x 600 600 x 600 1200 x 600
Tile actual size (mm) 595 x 595 595 x 595 1195 x 595
Colour White
F
Gyprex® Tiles
Manual handling - When manually handling tiles and boards or
packs, use correct manual handling techniques according to size,
thickness and density.
PRODUCT & SAFETY DATASHEET Storage conditions - Store in dry conditions. Tiles should not be
stored on temparatures exceeding 52oC. To maintain stability place
pallets on firm level ground and ensure that stacks are both level
and vertical.
Supplier Saint-Gobain Gyproc Emirates Industries LLC Quartz (silica) 0.1 mg/m 8 hr TWA
8
-
ICAD 1, Mussafah Man Made Mineral 5 mg/m3 8 hr TWA -
Abu Dhabi Fibers (MMMF) (gravimetric method)
United Arab Emirates
P.O. Box 38983 Personal protection
Free Phone: +971 800 GYPROC (497762) Respiratory S51 - Use only in well ventilated areas.
Email: gyproc-me@saint-gobain.com S39 - Wear eye / face protection.
Face masks to EN 149 FFP2.
Recommended uses: Gyprex tiles are used as internal ceiling linings
in buildings. Skin S36 + S37 - Wear suitable protective clothing
and gloves.
2. Hazards identification
The product is not classified as hazardous under the CLP Eye S39 - Wear eye / face protection.
regulations. Dust from sawing or sanding may irritate the respiratory Eye protection to BS EN 166.
system, skin and eyes.
9. Physical and chemical properties
3. Composition / Information on ingredients Appearance: Flast sheet tiles with decorative vinyl laminated to
Plasterboard: Calcium sulphate dihydrate. Natural constituents may the surface with aluminium foil backing.
include minor amounts of quartz. Small quantities of chopped glass
10. Stability and reactivity
fibre, microsilica and vermiculite may be added with starch, foam
No special physical conditions need to be avoided. No specific
and dispersants.
restrictions regarding incompatible materials.
Polyvinylchloride film: Manufactured from plasticised
11. Toxicology information
polyvinylchloride and additives appropriate for processing or use,
No known toxicological effects.
e.g. thermal & UV stabilisers and pigments.
12. Ecological information
PET metallic foil film: Polyester or polyethylene terephthalate (PET)
Stable product with no known adverse environmental effects.
is a high‐performance, crystal clear or metallized thermoplastic
The polyvinylchloride film is unsuitable for incernation unless the
made from ethylene glycol and dimethyl terephthalate (DMT)
incenerator is designed to handle corrosive flue cases.
with appropriate additives, stabilizer and pigments which results
in improved gas/moisture barrier properties for demanding 13. Disposal considerations
applications. Waste from gypsum plasterboard products is normally classified
as ‘non-hazardous, non-inert’, is fully recyclable and is classified as
4. First aid measures
EWC 02 08 17.
Eye contact S26 - Rinse immediately with plenty of water
and seek medical advice. If you would like to recycle Gypsum plasterboard R ECYC
OC L
waste, we at Gyproc offer Gypsum recycling PR
Skin contact S28 - Wash immediately with plenty of soap and
IN
GY
G
services and are happy to take segregated
Gyproc reserves the right to modify data without prior notice. If required please contact Gyproc technical department
water.
waste from your site. Please refer to the Gyproc®
S62 + S64 - If swallowed, do not induce
G
Ingestion
GY
Plasterboard Recycling brochure. Always seek
IN
PR
OC CYCL
vomiting, seek medical advice immediately. RE
advice of a trained and competent professional.
Rinse mouth with water.
Off-cuts, where appropriate, can be used as
Inhalation S51 + S63 - Only use in well ventilated areas. noggings to reduce or remove recycling requirement. Alternatievely,
Remove casualty to fresh air and keep at rest. Plasterboard waste can be disposed off at an authorized landfill site
General Get medical attention if any symptoms persist. in accordance with the local waste management regulations.
Saint-Gobain Gyproc Middle East FZE Saint-Gobain Gyproc Emirates Industries LLC
P.O.Box 261107 P.O.Box 38983
Dubai • UAE I CAD 1 • Mussafah
www.gyproc.ae Abu Dhabi • UAE