Professional Documents
Culture Documents
0
EARTH WORK
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
10/29/2023 2
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
SUB HEAD:4.0
CONCRETE WORK
CEMENT CONCRETE [CAST-IN-SITU] ORDINARY MIX
Providing and laying in position cement concrete of
specified grade excluding the cost of centring and
4.1
shuttering -
-All work upto plinth level:
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone
4.1.2 cum 13.65 10,673.50 145693.28
aggregate 20 mm nominal size)
1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone
4.1.5 cum 6.7 9,872.10 66143.07
aggregate 20 mm nominal size)
Providing and laying cement concrete in retaining
walls, return walls (any thick-ness) including
attached pilasters, columns, piers, abutmets, pillars,
posts, struts, buttresses, string or lacing courses,
4.2
parapets, coping bed blocks, anchor blocks, plain
window sills, fillets, sunken floor etc. upto floor five
level, excluding the cost of centring shuttering and
finishing -
1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone
4.2.1 cum 0 13,661.70 0.00
aggregate 20 mm nominal size)
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone
4.2.2 cum 0 11,874.50 0.00
aggregate 20 mm nominal size)
1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone
4.2.3 cum 1.42 11,657.60 16553.79
aggregate 20 mm nominal size)
Providing and laying cement concrete in kerbs, steps
4.3 and the like at or near ground level excluding the
cost of centering, shuttering and finishing.
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone
4.3.1 cum 0 10,818.60 0.00
aggregate 20 mm nominal size)
TOTAL 228390.14
SUB HEAD : FORM WORK [CENTERING AND SHUTTERING]
Centering shuttering including struttings, propping
4.4
etc. and removal of form work for:
4.4.1 Foundations, footings, bases for columns. cum 6.8 238.60 1622.48
4.4.3 Columns, piers, abutments, pillaras, posts and struts. cum 3.85 391.00 1505.35
TOTAL 3127.83
SUB HEAD: DAMP PROOF COURSE ITEMS
Providing and laying damp-proof course with
4.10 cement concrete 1:2:4 (1 cement: 2 coarse sand : 4
graded stone aggregate 12.5mm nominal size).
4.10.1 D.P.C. 40 mm thick cum 6.75 445.90 3009.825
Providing and laying damp-proof course with
4.11 cement concrete 1:2:4 (1 cement: 2 coarse sand : 4
graded stone aggregate 20mm nominal size).
4.11.1 D.P.C. 50 mm thick cum 0 553.90 0
Providing & applying a coat of residual petroleum
bitumen of grade of VG-10 of aproved quality using
4.13 1.7kg per square metre on damp proof course after cum 4.6 124.70 573.62
cleaning the surface with brushes and finally with a
piece of cloth lightly soaked in kerosene oil.
TOTAL 3583.445
10/29/2023 3
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
SUB HEAD-5
REINFORCED CEMENT CONCRETE WORK
Providing and laying in position specified grade of
reinforced cement concrete excluding the cost of
5.1
centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate
5.1.1 cum 12.6 12,581.00 158520.6
20 mm nominal size)
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone
5.1.2 cum 10,974.60 0
aggregate 20 mm nominal size)
1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate
5.1.3 cum 10,758.10 0
20 mm nominal size)
Reinforced cement concrete work in walls (any
thickness), including attached pilasters, buttresses,
plinth and skirting courses, fillets, columns, pillars,
5.2 0
piers, abutments, posts and struts etc. upto floor five
level excluding cost of centring, shuttering, finishing
and reinforcement-
1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate
5.2.1 cum 7.8 13,581.90 105938.82
20 mm nominal size)
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone
5.2.2 cum 11,791.90 0
aggregate 20 mm nominal size)
1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate
5.2.3 cum 11,575.50 0
20 mm nominal size)
10/29/2023 4
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
Suspended floors, roofs, landings, balconies and access
5.8.4.1 sqm 464.30 0
platform with timber planks
Lintels, beams, plinth beams, girders, bressumers and
5.8.5.2 sqm 0
cantilevers with wooden plank
5.8.6.1 Columns, Pillars, Piers, Abutments, Posts and Struts with sqm 0 483.00 0
shuttering ply
Stairs (excluding landings) except spiral-staircases with
5.8.7.1 sqm 0 477.80 0
wooden plank
5.8.13 Weather shade, Chajjas, corbels etc., including edges. sqm 0 417.70 0
5.8.15 Cornices and mouldings sqm 481.4 0
Extra for additional height in centring, shuttering
where ever required with adequate bracing, propping
etc. including cost of de-shuttering and decentring at
5.1 all levels, over a height of 3.5 m, for every additional sqm 0 214.2 0
height of 1 metre or part thereof:
Suspended floors, roofs, landing, beams and balconies
(Plan area to be measured).
TOTAL 0
SUB HEAD: STEEL REINFORCEMENT
Reinforcement for R.C.C. work including straightening,
5.19 cutting, bending, placing in position and binding all
complete upto plinth level.
5.19.1 Mild steel and Medium Tensile steel bars. Kg 0 77.90 0
Thermo-Mechanically Treated bars of grade Fe-500D or
5.19.4 Kg 6359 78.20 497273.8
more
5.19.2 Hard drawn steel wire Kg 35 82.40 2884
Reinforcement for R.C.C. work including straightening,
5.20 cutting, bending, placing in position and binding all 0
complete above plinth level.
5.20.1 Mild steel and Medium Tensile steel bars. Kg 77.90 0
5.20.2 Hard drawn steel wire Kg 82.4 0
Thermo-Mechanically Treated bars of grade Fe-500D or
5.20.4 Kg 4485 78.20 350727
more
TOTAL 850884.8
MISCELLANEOUS
Extra for laying reinforced cement concrete in or under
5.21 water and/ or liquid mud including cost of pumping or
bailing out water and removing slush etc., complete.
cum per
5.21.1 Reinforced cement concrete for R.C.C. footing meter 0 148.00 0
depth
cum per
5.21.2 Reinforced cement concrete for R.C.C. Column meter 2.2 2631.70 5789.74
depth
Extra for laying reinforced cement concrete in or under
5.22 cum 1.25 188.40 235.5
foul positions.
Smooth finishing of the exposed surface of R.C.C. work
5.23 with 6mm thick cement mortar 1:3 (1 Cement: 3 fine sqm 4.5 189.40 852.3
sand)
Add for plaster drip course/ groove in plastered
5.24 metre 38.40 0
surface or moulding to R.C.C. projections.
TOTAL 6877.54
10/29/2023 5
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
SUB HEAD- 6
BRICK WORK
First class brick work in foundation and plinth
6.1
including cost of all materials as required complete:-
6.1.1 In cement mortar 1:2 ( 1 cement : 2 fine sand ). cum 9,511.60 0
6.1.2 In cement mortar 1:3 ( 1 cement : 3 fine sand ). cum 9,152.80 0
6.1.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). cum 6.3 8,888.40 55996.92
6.1.4 In cement mortar 1:5 ( 1 cement : 5 fine sand ). cum 8,746.10 0
6.1.5 In cement mortar 1:6 ( 1 cement : 6 fine sand ). cum 2.6 8,624.10 22422.66
Second class brick work in foundation and plinth
6.2
including cost of all materials as required complete:-
6.2.1 In cement mortar 1:2 ( 1 cement : 2 fine sand ). cum 8,480.00 0
6.2.2 In cement mortar 1:3 ( 1 cement : 3 fine sand ). cum 8,121.20 0
6.2.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). cum 4.2 7,856.80 32998.56
6.2.4 In cement mortar 1:5 ( 1 cement : 5 fine sand ). cum 7,714.50 0
6.2.5 In cement mortar 1:6 ( 1 cement : 6 fine sand ). cum 7,592.50 0
First class brick work in superstructure above plinth
6.3 level & upto floor-five level including cost of all
materials as required complete:-
6.3.1 In cement mortar 1:2 ( 1 cement : 2 fine sand ). cum 10,737.40 0
6.3.2 In cement mortar 1:3 ( 1 cement : 3 fine sand ). cum 10,363.50 0
6.3.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). cum 6.2 10,136.49 62846.238
6.3.4 In cement mortar 1:5 ( 1 cement : 5 fine sand ). cum 9,987.50 0
6.3.5 In cement mortar 1:6 ( 1 cement : 6 fine sand ). cum 0 9,859.70 0
Second class brick work in superstructure above
6.4 plinth level & upto floor-five level including cost of all
materials as required complete:-
6.4.1 In cement mortar 1:2 ( 1 cement : 2 fine sand ). cum 9,708.90 0
6.4.2 In cement mortar 1:3 ( 1 cement : 3 fine sand ). cum 9,708.90 0
6.4.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). cum 9,056.40 0
6.4.4 In cement mortar 1:5 ( 1 cement : 5 fine sand ). cum 8,907.40 0
6.4.5 In cement mortar 1:6 ( 1 cement : 6 fine sand ). cum 8,779.60 0
Extra for brick masonry work in superstructure above
floor-V level for each four floors or part thereof by
6.5 cum 397.8 0
mechanical means by lifting material using mobile
crane as required complete.
Extra for brick masonry work in triangular, square and
6.6 rectangular pillars including cost of all materials as cum 419.1 0
required complete.
Extra for brick masonry work in circular pillars
6.7 cum 749 0
including cost of all materials as required complete.
Half brick masonry work with first class bricks in
6.10 foundation and plinth including cost of all materials as
required complete:-
6.10.1 In cement mortar 1:2 ( 1 cement : 2 fine sand ). sqm 1,257.70 0
6.10.2 In cement mortar 1:3 ( 1 cement : 3 fine sand ). sqm 1,217.50 0
6.10.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). sqm 1.8 1,187.90 2138.22
6.10.4 In cement mortar 1:5 ( 1 cement : 5 fine sand ). sqm 1,171.90 0
Half brick masonry work with second class bricks in
6.11 foundation and plinth including cost of all materials
required as required complete:-
10/29/2023 6
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
6.11.1 In cement mortar 1:2 ( 1 cement : 2 fine sand ). sqm 1,116.50 0
6.11.2 In cement mortar 1:3 ( 1 cement : 3 fine sand ). sqm 1,076.30 0
6.11.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). sqm 1,046.70 0
6.11.4 In cement mortar 1:5 ( 1 cement : 5 fine sand ). sqm 1,030.70 0
Half brick masonry work with first class bricks in
6.12 superstructure upto floor five level including cost of
all materials as required complete:-
6.12.1 In cement mortar 1:2 ( 1 cement : 2 fine sand ). sqm 1,435.80 0
6.12.2 In cement mortar 1:3 ( 1 cement : 3 fine sand ). sqm 1,393.90 0
6.12.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). sqm 1,363.10 0
6.12.4 In cement mortar 1:5 ( 1 cement : 5 fine sand ). sqm 1,346.50 0
Half brick masonry work with second class bricks in
6.13 superstructure upto floor five level including cost of
all materials as required complete:-
6.13.1 In cement mortar 1:2 ( 1 cement : 2 fine sand ). sqm 1,245.10 0
6.13.2 In cement mortar 1:3 ( 1 cement : 3 fine sand ). sqm 1,203.20 0
6.13.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). sqm 1.11 1,172.40 1301.364
6.13.4 In cement mortar 1:5 ( 1 cement : 5 fine sand ). sqm 1,155.80 0
Extra for half brick masonry work in superstructure
above floor-V level for each four floors or part thereof
6.14 sqm 52.00 0
by mechanical means by lifting material using mobile
crane as required complete.
1st class brick masonry work 75mm thick in
6.15 superstructure upto floor five level including cost of
all materials as required complete:-
6.15.1 In cement mortar 1:3 ( 1 cement : 3 fine sand ). sqm 3.56 877.50 3123.9
2nd class brick masonry work 75mm thick in
6.16 superstructure upto floor five level including cost of 0
all materials as required complete:-
6.16.1 In cement mortar 1:3 ( 1 cement : 3 fine sand ). sqm 792.80 0
Extra for 75mm thick brick masonry work in
superstructure above floor-V level for each four floors
6.17 sqm 30.20 0
or part thereof by mechanical means by lifting
material using mobile crane etc. as required complete.
Extra for providing & placing in position 2 nos 6mm
dia MS bars at every 6th course of full brick masonry
6.18 work including anchorage in joints of 75mm in each
side in superstructure for all level including cost of all
materials as required complete:-
6.18.1 In cement mortar 1:2 ( 1 cement : 2 fine sand ). cum 753.80 0
6.18.2 In cement mortar 1:3 ( 1 cement : 3 fine sand ). cum 658.10 0
6.18.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). cum 3.2 587.60 1880.32
6.18.4 In cement mortar 1:5 ( 1 cement : 5 fine sand ). cum 549.70 0
6.18.5 In cement mortar 1:6 ( 1 cement : 6 fine sand ). cum 517.10 0
Extra for providing & placing in position 2 nos 6mm
dia MS bars at every 4th course of half brick masonry
6.19 work including anchorage in joints of 75mm in each
side in superstructure for all level including cost of all
materials as required complete:-
10/29/2023 7
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
6.19.1 In cement mortar 1:2 ( 1 cement : 2 fine sand ). sqm 247.30 0
6.19.2 In cement mortar 1:3 ( 1 cement : 3 fine sand ). sqm 218.60 0
6.19.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). sqm 197.40 0
6.19.4 In cement mortar 1:5 ( 1 cement : 5 fine sand ). sqm 186.00 0
6.19.5 In cement mortar 1:6 ( 1 cement : 6 fine sand ). sqm 176.30 0
Extra for providing & placing in position 2 nos 6mm
dia reinforcement at every 3rd course of 75mm thick
6.20 brick masonry work including anchorage in joints of
75mm in each side in superstructure for all level
including cost of all materials as required complete:-
6.20.1 In cement mortar 1:3 ( 1 cement : 3 fine sand ). sqm 222.50 0
Extra for laying brick work in or under water and/ or
liquid mud including cost of pumping and/ or boiling per Cum.
6.21 8.65 495.50 4286.075
out water and removing slush etc. as required /Mtr.
complete.
Providing and laying gypsum panel partitions 100 mm
thick with water proof gypsum panels / blocks of size
666 x 500 x 100 mm having minimum compressive
strength of 9.3 kg / sq.cm., made of calcite phosphor
6.26 sqm 1,106.60 0
gypsum fixed with tongue and groove, jointed with
bonding plaster as per manufacturers specifications in
super structure above plinth level upto floor five level
including cost of all materials required complete.
Extra for providing & laying gypsum panel partitions
in superstructure above floor five level for every four
6.27 sqm 73.90 0
floors or part thereof including cost of all materials
required complete.
Providing and laying autoclaved aerated cement
blocks masonry with 150mm/230mm/300 mm thick
AAC blocks in super structure above plinth level up to
floor V level with RCC band at sill level and lintel level
6.29 cum 8,409.60 0
with approved block laying polymer modified
adhesive mortar all complete as per direction of
Engineer-in-Charge. (The payment of RCC band and
reinforcement shall be made for seperately).
TOTAL 186994.257
SUB HEAD : 7.0
CLADDING WORK
Marble work gang saw cut (polished and
machine cut) of approved thickness for wall lining
(veneer work), backing filled with a grout of
average 12 mm thick cement mortar 1:3 (1 cement :
3 fine sand) including pointing with white cement
7.1 mortar 1:2 (1 white cement : 2 marble dust)
with an admixture of pigment to match the
marble shade: (to be secured to the backing by
means of cramps, which shall be paid for
separately), including rubbing, curing etc. complete
at all levels as required:-
18 mm thick Raj Nagar Plain white marble/ Udaipur
7.1.1 green marble/ Zebra black marble or equivalent
duly approved:-
7.1.1.1 Area of slab upto 0.50 sqm. sqm 3,207.00 0
7.1.1.2 Area of slab over 0.50 sqm. sqm 62.56 3,363.00 210389.28
10/29/2023 8
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
14 mm thick Raj Nagar Plain white marble/ Udaipur
7.1.2 green marble/ Zebra black marble or equivalent
duly approved:-
7.1.2.1 Area of slab upto 0.50 sqm. sqm 44.6 2,958.90 131966.94
7.1.2.2 Area of slab over 0.50 sqm. sqm 3,117.10 0
Providing and fixing gang saw cut of approved
thickness mirror polished, premoulded and
prepolished, machine cut for kitchen platforms,
vanity counters, window sills, facias and similar
locations of required size, approved shade, colour
7.2 and texture laid over 20 mm thick base of cement
mortar 1:4 ( 1 cement : 4 fine sand ) with joints
treated with white cement, mixed with matching
pigment, epoxy touch ups, including rubbing ,
curing, moulding and polishing to edges to give
high gloss finish etc. complete at all levels:-
18 mm thick Rajnagar Plain white marble/ Udaipur
7.2 green marble/ Zebra black marble or equivalent
duly approved:-
7.2.1 Area of slab upto 0.50 sqm. sqm 2,131.20 0
7.2.2 Area of slab over 0.50 sqm. sqm 0 2,025.30 0
18 mm thick Granite of any colour and shade duly
7.2.3
approved:-
7.2.3.1 Area of slab upto 0.50 sqm. sqm 3,505.90 0
7.2.3.2 Area of slab over 0.50 sqm. sqm 3,544.60 0
Stone tile (polished) work for wall lining over 12mm
thick bed of cement mortar 1:3 (1 cement : 3 fine
sand) and cement slurry @ 3.3 kg/sqm including
7.9
pointing in white cement complete including
rubbing, curing etc. complete at all levels as
required:-
7.9.1 8 mm thick
Raj Nagar Plain white marble/ Udaipur green marble/
7.9.1.1 sqm 68.5 1,846.00 126451
Zebra black marble or equivalent duly aproved.
7.9.1.2 Granite of any colour and shade duly approved . sqm 44.26 2,411.00 106710.86
Providing and laying flamed finish Granite stone
flooring in required design and patterns, in linear
as well as curvilinear portions of the building all
complete as per the architectural drawings with 18
mm thick stone slab over 20 mm (average) thick
7.12 base of cement mortar 1:4 (1 cement : 4 fine sand)
laid and jointed with cement slurry and pointing
with white cement slurry admixed with pigment of
matching shade including rubbing, curing and
polishing etc. all complete as specified and as
directed by the Engineer-in-Charge.
Flamed finish granite stone slab Jet Black, Cherry Red,
7.12.1 sqm 2,913.40 0
Elite Brown, Cat Eye or equivalent.
10/29/2023 9
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
Providing and laying Polished Granite stone
flooring in required design and patterns, in linear
as well as curvilinear portions of the building all
complete as per the architectural drawings with 18
mm thick stone slab over 20 mm (average) thick
7.13 base of cement mortar 1:4 (1 cement : 4 fine sand)
laid and jointed with cement slurry and pointing
with white cement slurry admixed with pigment of
matching shade including rubbing , curing and
polishing etc. all complete as specified and as
directed by the Engineer-in-Charge.
Polished Granite stone slab jet Black, Cherry Red, Elite
7.13.1 sqm 42 3,528.40 148192.8
Brown, Cat Eye or equivalent.
TOTAL 723710.88
SUB HEAD : 8.0
WOOD & PVC WORK
Providing wood work in frames of doors, windows,
8.1 clerestory windows and other frames, wrought
framed and fixed in position :
8.1.1 Sal Wood cum 0.26 109431.4 28452.164
8.1.2 Karai wood cum 0.33 92,079.70 30386.301
8.1.3 Local Teak Wood cum 0 87,719.70 0
Providing and fixing panelling or panelling and
glazing in panelled or panelled and glazed shutters
for doors, windows and clerestory windows (Area of
8.6 opening for panel inserts excluding portion inside
grooves or rebates to be measured). Panelling for
paneled or paneled and glazed shutters 25 to 40 mm
thick.
8.6.1 Local Teak Wood 16 mm thick sqm 0.12 1,624.20 194.904
8.6.2 Gamair Wood 16 mm Thick sqm 0 1,782.60 0
8.6.3 Ply wood 5 ply, 9 mm thick :
Decorative plywood both side decorative veneer (Type -
8.6.3.1 sqm 1,971.60 0
1) conforming to IS 1328 BWR type.
8.6.3 Ply wood 5 ply, 9 mm thick :
Decorative plywood one side decorative veneer and
8.6.3.2 commercial veneer on other face (Type 1) conforming sqm 8.62 1,955.20 16853.824
to IS 1328 BWR Type
Decorative plywood one side decorative veneer and
8.6.4.2 commercial veneer on other face (Type 1) conforming sqm 2,069.90 0
to IS 1328 BWR Type
10/29/2023 10
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
10/29/2023 11
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
Providing 50 × 50 × 50 mm Gamair wood plugs
including cutting brick work and fixing in cement
8.30 Nos 0 20.7 0
mortar 1:3 (1 cement: 3 fine sand) and making good
the walls etc.
Providing and fixing decorative plywood 4 mm thick
one side decorative veneer conforming to IS: 1328
8.35
(type-1) for plain lining / cladding with necessary
screws, priming coat on unexposed surface with:
8.35.1 Decorative veneer facings of approved manufacture. sqm 1,224.50 0
Providing and fixing factory made P.V.C. door frame
of size 50x47mm with a wall thickness of 5mm,
made out of extruded 5mm rigid PVC foam sheet
mitred at corners and joined with 2 Nos. of 150mm
long brackets of 15x15mm M.S. square tube, the
vertical door profiles to be reinforced with 19×19mm
8.116 Mtr 3.12 427.70 1334.424
MS square tube of 19 gauge, EPDM rubber gasket
weather seal to be provided through out the frame .
The door frame to be fixed to the wall usuing MS
screws of 65/100 mm size complete as per
manufacturers' specification and direction of
Engineer-In-Charge.
Providing and fixing 28 mm thick door shutter made
of solid PVC foam profile with homogenous fine
cellular structure having smooth outer integral skin
having 71mm width & 28mm thick as vertical &
horizontal styles. Joints are made using solvent
adhesive and GI ‘C sections (39mm x 19mm x 0.6mm
thick) or M S pipe (40mm x 20mm ) stiffener frame
8.121 sqm 3.6 3,094.40 11139.84
insert & telescopic polymeric ‘L’ corners .The panel
shall be filled with 3mm thick high - pressure
compact laminate as per manufacturer’s
specifications and directions of the Engineer-incharge,
cover moulding shall be provided for
covering fixing screws and elegant look.( for W.C.
bathroom door shutter).
TOTAL 142280.763
SUB HEAD : 9.0
STEEL WORK
10/29/2023 12
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
9.6.1 80xl.25mm M.S. laths with 1.25 mm thick top cover. sqm 2,924.30 0
9.6.2 80x1.20 mm M.S. laths with 1.20 mm thick top cover. sqm 2,393.40 0
Providing and fixing ball bearing for rolling shutters
9.7 (exceeding 10 sqm area) of approved make complete as sqm 435.6 0
required.
10/29/2023 13
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
10.6.1 40mm thick. sqm 526.40 0
Extra for making chequers of approved pattern in
10.7 Cement Concrete floors, steps, landing, pavements etc. sqm 36.00 0
complete.
10/29/2023 14
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
Providing and fixing Kota stone in floors over 20 mm
thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand
10.31 ) jointed with ordinary cement slurry including pointing
with ordinary cement mixed with pigment of matching
shade, including rubbing and polishing complete.
10.31.1 Kota stone slab 25mm thick sqm 1,551.90 0
Kota stone slabs 25 mm thick in risers of steps, skirting,
dado and pillars laid on 12 mm (average) thick cement
mortar 1 : 3 ( 1 cement : 3 fine sand ) and joined with
10.32 sqm 6.4 1,642.90 10514.56
ordinary cement slurry mixed with pigment to match the
shade of slabs, including rubbing and polishing
complete.
10/29/2023 15
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
TOTAL 142973.8
10/29/2023 16
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
SUB-HEAD - 11
ROOFING
10/29/2023 17
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
Providing and fixing tiled false ceiling of specified
materials of size 595x595 mm in true horizontal level,
suspended on interlocking metal grid of hot dipped
galvanized steel sections ( galvanized @ 120 grams/
sqm, both side inclusive) consisting of main "T" runner
with suitably spaced joints to get required length and of
size 24x38 mm made from 0.30 mm thick (minimum)
sheet, spaced at 1200 mm center to center and cross "T"
of size 24x25 mm made of 0.30 mm thick (minimum)
sheet, 1200 mm long spaced between main "T" at 600
mm center to center to form a grid of 1200x600 mm and
secondary cross "T" of length 600 mm and size 24x25
mm made of 0.30 mm thick (minimum) sheet to be
interlocked at middle of the 1200x600 mm panel to
11.28
form grids of 600x600 mm and wall angle of size
24x24x0.3 mm and laying false ceiling tiles of approved
texture in the grid including, required cutting/making,
opening for services like diffusers, grills, light fittings,
fixtures, smoke detectors etc. Main "T" runners to be
suspended from ceiling using GI slotted cleats of size 27
x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and
50 mm long dash fasteners, 4 mm GI adjustable rods
with galvanized butterfly level clips of size 85 x 30 x 0.8
mm spaced at 1200 mm center to center along main T,
bottom exposed width of 24 mm of all T-sections shall
be pre-painted with polyester paint, all complete for all
heights as per specifications, drawings and as directed
by Engineer-in-charge.
10/29/2023 18
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
RAIN WATER PIPES WITH FITTINGS
Providing and fixing on wall face unplasticised
Rigid PVC rain water pipes (working pressure 4
11.42 kg/cm2) conforming to IS : 13592 Type A including 0
jointing with seal ring conforming to IS : 5382
leaving 10 mm gap for thermal expansion:
11.42.1 Single socketed pipe - 75 mm OD metre 12 158.30 1899.6
11.42.2 Single socketed pipe - 110 mm OD metre 16.5 268.50 4430.25
Providing and fixing unplasticised -PVC pipe clips of
approved design to unplasticised - PVC rain water
pipes by means of 50x50x50mm hard wood plugs,
11.44 screwed with M.S. screws of required length
including cutting brick work and fixing with cement
mortar 1 : 4 (1cement : 4 fine sand) making good the
wall etc. complete.
11.44.1 75mm Each 4 187.80 751.2
11.44.2 110mm Each 6 190.50 1143
Providing and fixing to the inlet mouth of rain water
11.45 pipe PTMT grating with thickness of 8mm and weighing
not less than 100gm. complete.
11.45.1 75mm Each 84.80 0
11.45.2 100mm Each 97.20 0
TOTAL 15260.21
SUB HEAD : 12.0
FINISHING WORK
CEMENT PLASTER
12.1 12 mm cement plaster of mix
12.1.1 Cement mortar 1:3 (1 cement : 3 fine sand) sqm 190.00 0
12.1.2 Cement mortar 1:4 (1 cement : 4 fine sand) sqm 64.6 174.80 11292.08
12.1.3 Cement mortar 1:5 (1 cement : 5 fine sand) sqm 166.60 0
12.1.4 Cement mortar 1:6 (1 cement : 6 fine sand) sqm 55.5 159.60 8857.8
15 mm cement plaster on the rough side of single or
12.2
half brick wall of mix:
12.2.1 Cement mortar 1:3 (1 cement : 3 fine sand) sqm 221.60 0
12.2.2 Cement mortar 1:4 (1 cement : 4 fine sand) sqm 203.40 0
12.2.3 Cement mortar 1:5 (1 cement : 5 fine sand) sqm 193.70 0
12.2.4 Cement mortar 1:6 (1 cement : 6 fine sand) sqm 185.30 0
12.3 20 mm cement plaster of mix :
12.3.1 Cement mortar 1:3 (1 cement : 3 fine sand) sqm 269.30 0
12.3.2 Cement mortar 1:4 (1 cement : 4 fine sand) sqm 21 245.60 5157.6
12.3.3 Cement mortar 1:5 (1 cement : 5 fine sand) sqm 232.80 0
12.3.4 Cement mortar 1:6 (1 cement : 6 fine sand) sqm 12.8 221.90 2840.32
12.4 6 mm cement plaster of mix :
12.4.1 Cement mortar 1:3 (1 cement : 3 fine sand) sqm 144.50 0
12.4.2 Cement mortar 1:4 (1 cement : 4 fine sand) sqm 136.90 0
Extra for plastering exterior walls of height more than
12.9 10 m from GL for every additional height of 3 m or part sqm 37.00 0
thereof complete.
Providing and applying plaster of paris putty of 2 mm
12.13 thickness over plastered surface to prepare the surface sqm 42 126.20 5300.4
even and smooth complete.
10/29/2023 19
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
ARTIFICIAL STONE PLASTER
Extra for lining out plaster to imitate stone or concrete
12.15 sqm 60.40 0
blocks walling.
PLAIN CEMENT MORTAR BANDS
12 mm thick plain cement mortar bands in cement
12.16
mortar 1:4 (1 cement : 4 fine sand):
12.6.1 Sunk Band cm. per m. 50 3.90 195
12.6.2 Raised Band cm. per m. 4.40 0
12.6.3 Raised Band cm. per m. 50 7.40 370
POINTING OF BRICK WORK
Pointing on brick work or brick flooring with cement
12.19
mortar 1:3 ( 1 cement : 3 fine sand ) complete.
12.19.1 Flush/ruled/Stuck or weathered Pointing sqm 111.00 0
12.19.2 Raised and cut Pointing sqm 186.10 0
INTERIOR FINISHING
12.21 White washing with lime to give an even shade sqm 21.30 0
Distempering with oil bound washable distemper of
approved brand and manufacture to give an even shade
12.24
[Payment shall be made after submission of Test
Certificate issued by the Manufacturer] :
10/29/2023 20
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
Painting on rain water, soil, waste and vent pipes and
fittings with synthetic enamel paint ( two or more coats
12.40 ) of required colour of approved brand and manufacture
to give an even shade on new work over and including
a priming coat of approved steel primer complete.
12.40.1 100mm. dia. metre 16 42.30 676.8
12.40.2 150mm. dia. metre 63.00 0
Painting (two or more coats) on rain water, soil waste
and vent pipes and fittings with aluminium paint of
approved brand and manufacture over a priming coat of
12.63
ready mixed zinc chromate yellow primer on new work
[Payment shall be made after submission of Test
Certificate issued by the Manufacturer]:
12.63.1 75 mm diameter pipes metre 32 28.90 924.8
12.63.2 100 mm diameter pipes metre 41.20 0
12.63.3 150 mm diameter pipes metre 61.50 0
TOTAL 60158
SUB HEAD: 15.00
PILE WORK
Boring, providing and installation bored cast-in-situ
reinforced cement concrete piles of grade M-25 of
specified diameter and length below the pile cap, to
carry a safe working load not less than specified,
excluding the cost of steel reinforcement but
including the cost of boring with bentonite solution
and temporary casing of appropriate length for
setting out and removal of same and the length of the
15.2
pile to be embedded in the pile cap etc. by percussion
drilling using Direct Mud Circulation (DMC) or Bailer
and Chisel Technique by Tripod and Mechanical Winch
Machine all complete, including removal of excavated
earth with all its lifts and leads. (Length of pile for
payment shall be measured upto bottom of pile cap).
Note: Truck Mounted rotary / TMR / Tubewell Boring
Machine shall not be used.
15.2.1 450 mm dia piles. metre 2,290.40 0
15.2.2 500 mm dia piles. metre 2,751.40 0
15.2.3 550 mm dia piles. metre 3,253.20 0
15.2.4 600 mm dia piles. metre 3,781.30 0
Vertical load testing of piles in accordance with IS
2911 (Part IV) including installation of loading platform
by Kentledge and preparation of pile head or
construction of test cap and dismantling of test cap
after test etc. complete as per specification & the
15.7 direction of Engineer incharge:-
Note: 1. Initial and Routine Load Test shall be carried
out by Dynamic Method of Testing
Note: 2. Testing agency shall submit the design of
loading platform for the approval of Engineer-in-
Charge.
10/29/2023 21
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
15.7.1 Single pile upto 50 tonne safe capacity
15.7.1.1 Initial test (Test Load 2.5 times the safe Capacity). 53,517.50 0
Single pile above 50 tonne and upto 100 tonne capacity
15.7.2
pile:-
15.7.2.1 Initial test (Test Load 2.5 times the safe Capacity). 60,207.20 0
TOTAL 0
SUBHEAD:16.0
ALUMINIUM WORK & STRUCTURAL GLAZING
10/29/2023 22
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
Prelaminated particle board of approved quality with
16.2.2 sqm 1,309.90 0
decorative lamination on both side.
10/29/2023 23
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
Providing and fixing 100 mm brass locks (best make of
approved quality) with 6 levers without pair of handles
16.14 for aluminium doors including necessary cutting and Each 472.40 0
making good etc. complete as per direction of Engineerin-
charge.
Providing and fixing anodised aluminium grill (anodised
transparent or dyed to required shade according to IS :
1868 with minimum anodic coating of Grade AC 15) of
approved design / pattern, with approved standard
section and fixed to the existing window frame with C.P.
16.17 brass / stainless steel screws @ 200 mm centre to centre, KG 483.30 0
including cutting the grill to proper opening size for
fixing and operation of handles and fixing approved
anodised aluminium standard section around the
opening, all complete as per requirement and direction
of Engineer-in-charge (only weight of grill to be
measured for payment).
Providing and fixing 12 mm thick frameless toughened
glass door shutter of approved brand and manufacture,
including providing and fixing top & bottom pivot &
16.18 spring type fixing arrangement and making necessary sqm 5,644.60 0
holes etc. for fixing required door fittings, all complete
as per direction of Engineer-in-charge (Door handle, lock
and stopper etc.to be paid separately).
SRTUCTURAL GLAZING
Providing and supplying aluminium extruded tubular
and other aluminium sections as per the architectural
drawings and approved shop drawings , the aluminium
quality as per grade 6063 T5 or T6 as per BS
1474,including super durable powder coating of 60-80
16.19 microns conforming to AAMA 2604 of required colour KG 368.50 0
and shade as approved by the Engineer-in-Charge. (The
item includes cost of material such as cleats, sleeves,
screws etc. necessary for fabrication of extruded
aluminium frame work. Nothing extra shall be paid on
this account).
Designing, fabricating, testing, protection, installing and
fixing in position semi (grid) unitized system of
16.20 structural glazing (with open joints) for linear as well as sqm 2,766.90 0
curvilinear portions of the building for all heights and all
levels,
10/29/2023 24
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
Providing, assembling and supplying vision glass panels
(IGUs) comprising of hermetically-sealed 6-12- 6 mm
insulated glass (double glazed) vision panel units of size
and shape as required and specified, comprising of an
outer heat strengthened float glass 6mm thick, of
approved colour and shade with reflective soft coating
on surface # 2 of approved colour and shade, an inner
Heat strengthned clear float glass 6mm thick, spacer
tube 12mm wide, dessicants, including primary seal and
secondary seal (structural silicone sealant) etc. all
16.21 sqm 4,362.60 0
complete for the required performances, as per the
Architectural drawings, as per the approved shop
drawings, as specified and as directed by the Engineer-in-
Charge. The IGUs shall be assembled in the factory/
workshop of the glass processor.“(Payment for fixing ofIGU
Panels in the curtain glazing is included in cost of
item No.26.2)“For payment, only the actual area of glasson
face # 1 of the glass panels (excluding the areas of thegrooves
and weather silicone sealant) provided and fixedin position,
shall be measured in sqm."
10/29/2023 25
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
Extra for openable side / top hung vision glass panels
(IGUs) including providing and supplying at site all
accessories and hardwares for the openable panels as
specified and of the approved make such as heavy duty
stainless steel friction hinges, min 4 -point cremone
16.22 locking sets with stainless steel plates, handles, buffers sqm 3,368.60 0
etc. including necessary stainless steel screws/ fasteners,
nuts, bolts, washers etc. all complete as per the
Architectural drawings, as per the approved shop
drawings, as specified and as directed by the Engineer- in-
Charge.
Designing, fabricating, testing, installing and fixing in
position Curtain Wall with Aluminium Composite Panel
16.25 Cladding, with open grooves for linear as well as sqm 4,299.60 0
curvilinear portions of the building , for all heights and
all levels etc. (16.25.1)
TOTAL 28270.92
SUB HEAD:18.00
SANITARY INSTALLATIONS
Providing and fixing water closet squatting pan (Indian
type W.C. pan ) with 100mm sand cast Iron P or S trap,
10 litre low level white P.V.C. flushing cistern with
18.1 manually controlled device (handle lever) conforming
to IS : 7231, with all fittings and fixtures complete
including cutting and making good the walls and floors
wherever required :
White Vitreous china Orrisa pattern W.C. pan of size
18.1.1 EACH 2 4,634.90 9269.8
580x440 mm with integral type foot rests.
Providing and fixing white vitreous china pedestal
type water closet (European type W.C. pan) with seat
and lid, 10 litre low level white P.V.C. flushing
18.2 cistern with manually controlled device (handle lever),
conforming to IS : 7231, with all fittings and fixtures
complete including cutting and making good the walls
and floors wherever required :
18.2.1 W.C. pan with ISI marked white solid plastic seat and lid EACH 4,398.30 0
Providing and fixing white vitreous china pedestal
type water closet (European type) with seat and lid, 10
litre low level white vitreous china flushing cistern &
C.P. flush bend with fittings & C.I.brackets, 40mm
18.3 flush bend, overflow arrangement with specials of
standard make and mosquito proof coupling of
approved municipal design complete including
painting of fittings and brackets, cutting and making
good the walls and floors wherever required :
18.3.1 W.C. pan with ISI marked white solid plastic seat and lid. EACH 1 5,219.50 5219.5
Providing and Fixing white vitreous china flat back
or wall corner type lipped front urinal basin of
430x260x350mm and 340x410x265mm sizes
respectively with automatic flushing cistern with
18.4 1
standard flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete, including
painting of fittings and brackets, cutting and making
good the walls and floors wherever required :
10/29/2023 26
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
One urinal basin with 5 litre white P.V.C. automatic
18.4.1 EACH 1 3,771.10 3771.1
flushing cistern.
Range of two urinal basins with 5 litre white P.V.C.
18.4.2 EACH 6,263.40 0
automatic flushing cistern.
Providing and fixing wash basin with C.I. brackets, 15
mm C.P. brass pillar taps,32 mm C.P. brass waste of
18.7 standard pattern, including painting of fittings and
brackets, cutting and making good the walls
wherever require :
18.7.1 White Vitreous China Wash basin size 630x450 mm with a EACH 1 3,070.60 3070.6
pair of 15 mm C.P. brass pillar taps
18.7.3 White Vitreous China Wash basin size 550x400 mm with a EACH 2,861.80 0
pair of 15 mm C.P. brass pillar taps.
Providing and fixing kitchen sink with C.I. brackets, C.P.
brass chain with rubber plug, 40 mm C.P. brass waste
18.9
complete, including painting the fittings and brackets,
cutting and making good the walls wherever required :
White glazed fire clay kitchen sink of size 600x450x250
18.9.1 EACH 1 2,958.50 2958.5
mm.
Providing and fixing Stainless Steel AISI 304 (18/8)
kitchen sink as per IS 13983 with C.I. brackets and
18.10 stainless steel plug 40 mm including painting of fittings
and brackets, cutting and making good the walls
wherever required:
18.10.1 Kitchen sink with drain board 0
18.10.1.1 510x1040 mm bowl depth 250mm. EACH 0 5,073.30 0
18.10.1.2 460x915 mm bowl depth 178mm. EACH 4,099.00 0
18.28 Providing and fixing P.V.C. waste pipe for sink or wash EACH 100.90 0
basin including P.V.C. waste fittings complete.(40MM DIA)
10/29/2023 27
CODE NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT(Rs)
SUBHEAD:20.0
SEWAGE AND DRAINAGE
Providing and laying cement concrete 1:5:10 (1
cement : 5 fine sand : 10 graded stone
20.2 aggregate 40 mm nominal size) alround S.W.
pipes including bed concrete as per standard
design:
20.2.1 100 mm diameter S. W. pipe metre 4.36 1,288.30 5616.988
20.2.2 150 mm diameter S. W. pipe metre 1,575.50 0
Making soak pit 2.5 m diameter 3.0 metre deep
with 45 x 45 cm dry brick honey comb shaft
20.10 with well burnt 2nd class bricks and S.W. drain EACH 60,699.80 0
pipe 100 mm diameter, 1.8 m long complete as
per standard design.
Constructing soak pit 1.20 x 1.20 x 1.20 m
filled with brickbats including S.W. drain pipe
20.11 EACH 0 7,072.80 0
100 mm diameter and 1.20 m long complete as
per standard design.
TOTAL 5616.988
10/29/2023 28