Professional Documents
Culture Documents
And explain the Difference between the 3 types of power 38. A series LC circuit is being supplied by a voltage
19. Give the Formula for Power Factor expression of v(t)= 10sin377t. (L= 300mH, C=0.47uF).
20. What is combination of resistance and reactance that Calculate the impedance, current flowing through the
oppose the flow of current? circuit and the power across the inductor.
21. What is (Capacitive or Inductive) part of the circuit that
opposes current flow? 39. A 50V, 1kHz AC supply is connected across the series
22. What is the real part of the circuit that opposes combination of resistor and capacitor. Determine the
current flow? magnitude of the current flowing through the resistor
and capacitor. Calculate also the total impedance, power
23. What is the formula for ω?
dissipated through the resistor and capacitor and power
24. What is the formula for Impedance(Z)?
dissipate through the resistor. (C=0.47 uF, R=100 ohms).
25. What is the formula for Current(I)?
Set B
26. What is the Formula when solving the Voltage Across the
Resistor?
40. Power electronics utilize semiconductor devices
27. What is the Formula when solving the Voltage Across the
operating in _______ mode.
Capacitor?
41. This _______ of semiconductor is being controlled by a
28. What is the Formula when solving the Voltage Across the
________ signal.
Inductor?
42. Give some examples of Common semiconductor switch.
29. Give the formula for Reactive Capacitance.
43. What are the construction of a Diode?
30. Give the formula for Reactive Inductance.
44. What are the parameters of a Diode?
31. Determine the formula for calculating the Phase Angle.
45. What are the regions of a Diode? 78. What are the 2 types of Single Phase Half – Wave Control
46. What is the contruction of Bipolar Junction Transistors Rectifier
(BJT)? 79. What is uses thyristors to control the firing angle of the
47. What are the parameters of BJT? switch?
48. Differentiate the Regions of Operaton in BJT. 80. What uses power transistors working with high switching
49. What is the construction of a Metal Oxide Field Effect frequency to improve the waveform quality of the input
Transistor (MOSFET)? current, increasing the power factor?
50. What are the parameters of a MOSFET?
51. Give the Operations of a MOSFET? 81. A thyristor half – wave controlled converter has a supply
52. Draw the MOSFET: N-channel Enhancement type. voltage of 240 V at 50 Hz and a load resistance of 100 ohms.
53. Draw the MOSFET: P-channel Enhancement type. What are the average values of the load voltage and current
54. Illustrate the MOSFET: N-Channel Depletion type. when the firing delay angle is 30 degrees.
55. Illustrate the MOSFET: P-Channel Depletion type. calculate the values of rms voltage, current, load
56. What does IGBT mean? power and power factor for 30 degrees firing angle.
57. What is the construction for IGBT?
58. Identify some Key Characteristics of an IGBT 82. If given 240V, 50Hz, how do you cancel the rms?
59. Draw the Schematic Symbol for an IGBT 83. What is the Formula of Power Factor?
60. Remember the comparison of IGBT to (BJT and MOSFET) 84. What is the formula in solving the Single Phase Halfwave
61. What is the Abbreviation for GTO? Control Rectifier (Vrms and Irms)?
62. Identify the Construction of GTO. 85. Determine the formulas in the Full Wave Half Controlled
63. Draw the Schematic symbol of GTO. Bridge with Resistive Load. ; Vav, Iav Vrms, Irms
64. Explain the Key Operations of a GTO 86. Identify the formulas of a Fullwave Half Controlled
65. What is the Application of a GTO. Rectifier with Inductive Load. ; Vav, Irms
66. Identify the name of the labeled electronic switches in 87. Give the formula in calculating the Fully Controlled
the figure below: Bridge with Inductive Load.
88. Write the formula for True Power(P)
89. Write the formula for Apparent Power(S)
90. Write the formula for Power/Load Power(V)
91. How do you calculate a Power Factor?
92. Give the Formula for Full Wave Controlled Rectifier;
Vav, Vrms, Irms
93. What is the Formula of a Field Voltage in SEDC?
94. Give the Formula of a Armature Voltage?
67.What is a type of converter that converts AC input voltage 95. Identify the Formula of a Generated Voltage?
to DC output voltage? 96 What is Kv?
68.What are the 2 types of Rectifier? 97. What is ω?
69. What uses only one diode and It can be transformer 98. Determine the Formula for Torque
coupled or not? 99. Enumerate the Formula of a Fully Controlled Bridge w/
70. What utilizes 4 diodes and 2 diode are off and 2 diodes SEDC motor; E, Vav, Iav
are on every half cycle of the input? 100. What is the formula in finding the Half Controlled
71. What is an output voltage developed for positive and Bridge with SEDC motor; Vav
negative half cycle of the input?
72. What is one diode is on and the other diode is off every 101. A 240 V, 50 Hz supply feed a highly inductive load of 50
half of the input cycle? ohms through a thyristor bridge. Calculate the load current,
73. How do you Calculate the Halfwave Average Voltage? load power and power factor for a firing delay angle of 45
74. How do you Calculate the Fullwave Average Voltage? degrees if the rectifier is:
75. Give the Formula in Calculating the RMS Value of a • Half controlled
HalfWave Rectifier. • Full controlled
76. Give the Formula in Calculating the RMS Value of a
FullWave Rectifier. 102. A resistive load is supplied with variable voltage d.c.
77. Design Considerations Of Rectifiers With Resistive Load from a Triac full-wave rectifier bridge combination
connected to an a.c. supply. Draw the circuit diagram
and, with the aid of voltage waveform sketches,
calculate the load power dissipation for load resistance
of 100 ohms, a voltage supply of 110V at 50Hz, and firing
angle delay of 45 degrees?
105.
A single-phase fully controlled SEDC motor drive has an
armature voltage constant of 0.9 V/rad/s, and an
armature
resistance of 0.75~. The field current is held constant at
itsrated value. Mains supply to the drive is 250V, 50Hz.