Professional Documents
Culture Documents
(a) Explain the working principle of complementary (class C) commutation circuit with
waveforms of capacitor voltage, thyristor currents for one cycle with respect to gate
signals assuming that initially one thyristor was ON and the capacitor is initially charged
accordingly.
(b)Determine the conduction time of thyristor and voltage across the thyristor and capacitor
when it is turned off for the class A commutation circuit which is initially relaxed. Assume
the following parameters L = 12mH, C = 2512F, R = 052 and V = 200V.
A single-phase half wave controlled rectifier with R
When R = 1052 and a = 45°, determine -load is fed from a 220V, 50Hz ac supply.
(5)
(i) Average dc output voltage
(ii) Rms output voltage
(iii) Form factor & Ripple factor
(iv) Rectification efficiency
(v) Transformer utilization factor
Draw output voltage and output current waveforms with respect to ac input voltage for single
phase bridge rectifier to show (5)
(a) Inversion mode of operation with R-L load
(b)Continuous conduction with R-L load and free- wheeling diode
(c)
Discontinuous conduction with R-L load and free- wheeling diode
(d) Discontinuous conduction with R-L-E load