These 96mm diameter mecanum wheels are well-suited for building a maneuverable robot chassis for smooth surfaces. Mecanum wheels allow omnidirectional movement, enabling the robot to move in any direction as well as rotate. When used as a set of four wheels, they provide unparalleled maneuverability. These mecanum wheels perform well for several reasons, including their narrow width, strong steel plates, minimal weight, good traction from rubber, and bearing-supported rollers.
These 96mm diameter mecanum wheels are well-suited for building a maneuverable robot chassis for smooth surfaces. Mecanum wheels allow omnidirectional movement, enabling the robot to move in any direction as well as rotate. When used as a set of four wheels, they provide unparalleled maneuverability. These mecanum wheels perform well for several reasons, including their narrow width, strong steel plates, minimal weight, good traction from rubber, and bearing-supported rollers.
These 96mm diameter mecanum wheels are well-suited for building a maneuverable robot chassis for smooth surfaces. Mecanum wheels allow omnidirectional movement, enabling the robot to move in any direction as well as rotate. When used as a set of four wheels, they provide unparalleled maneuverability. These mecanum wheels perform well for several reasons, including their narrow width, strong steel plates, minimal weight, good traction from rubber, and bearing-supported rollers.
are an excellent option for building a nimble chassis
for smooth surfaces. Mecanum wheels provide maneuverability like no other wheel design. When used in a set of four, they allow omnidirectional movement. They give your robot the ability to move right, left, forward, backward, or at an oblique angle, while retaining the ability to rotate around the center of the chassis like a skid-steer chassis with conventional wheels.These particular mecanums provide unparalleled performance for a number of reasons:
• The narrow overall width makes them easier to
integrate into space-limited builds • The steel side plates offer excellent strength • The overall weight has been kept to a minimum, which yields better acceleration • The 70A durometer rubber provides great traction • Bearing-supported rollers maximize efficiencyExtrusion-based building provides unlimited mounting positions. goRAIL has T-slot style grooves down the sides for slide-and-fasten style building. Each unique shape is feature- packed for unparalleled possibilities. goRAIL is so much more than a structural component. While at a glance the outer profile is square, the corners follow a 32mm diameter for use withThe bore of the goRAIL has a unique combination shape derived from a 14mm diameter circle and a 12mm square. Utilize this bore by slidinn each end of the goRAIL to support a shaft, or create linear motion by inserting aand allowing the goRAIL to act as a linear motion guide. Use the T-slots down the sides of the goRAIL or the threaded holes on the ends to attach other goBILDA components • These products have been hand curated by our R&D team. We have selected products that are directly compatible with or very relevant to the 1109-0024-0216.