Professional Documents
Culture Documents
1. Click Structure tab Reinforcement panel drop-down Reinforcement Settings. Determine if rebar shape matching references hooks.
This is important to specify before any rebar is placed in a project because it cannot be changed later in the design process. Close the dialog
when complete.
3. In the Type selector at the top of the Properties palette, select the desired rebar type.
4. Optional. If necessary, click Modify | Place Rebar tab Family panel (Load Shapes) to load additional rebar shapes.
5. In either the Rebar Shape Selector on the Options Bar or the Rebar Shape Browser, select the desired rebar shape.
6. Select the placement plane. Click one of the following placement planes from Modify | Place Rebar tab Placement Plane panel
• (Current Work Plane)
• (Near Cover Reference)
• (Far Cover Reference)
The plane defines where the rebar is placed in the host.
8. If you place standard style rebar adjacent to stirrup/tie style rebar, the standard bar snaps along the edge of the stirrup/tie bar. This includes
the straight edges as well as the fillets and hooks of the stirrup/tie rebar.
9. Click to place the rebar in the host. If necessary, press the Spacebar during placement to rotate the orientation of the rebar shape within the
cover reference. Orientation can be shifted after placement by selecting the rebar and using the Spacebar similarly.
If you need to place rebar parallel to a distant edge of the host, place your cursor near the edge, then press and hold Shift. The edge will
highlight. Continue to hold Shift and place the rebar where needed.
Rebar lengths default to the length of the host element or to other host elements within the constraints of the cover reference. To edit
lengths, change to either a plan or an elevation view, select the rebar instance and revise the end points as needed.
http://help.autodesk.com/cloudhelp/2016/ENU/Revit-Model/files/GUID-D61AF551-AD1... 16/05/2016
Place Rebar Page 2 of 2
Note: To rehost a rebar shape, select it and click Modify | Structural Rebar tab Host panel (Pick New Host). Then select a new rebar
host.
Related Concepts
• About Fillet and Hook References
• About Reinforcement
• About Reinforcing Concrete Parts
Related Tasks
• Modify a Rebar Shape
• Sketch Planar Rebar
• Sketch Multi-planar Rebar
• Adjust the Visibility for Rebar in a View
• Place a Rebar Set
• Define and Add a Rebar Hook
Related Reference
• Reinforcement Rounding
• General Reinforcement Settings
• Rebar Instance Properties
• Rebar Type Properties
Please help us improve the content on this site. Was this article helpful? Yes No
http://help.autodesk.com/cloudhelp/2016/ENU/Revit-Model/files/GUID-D61AF551-AD1... 16/05/2016