Professional Documents
Culture Documents
ACETALDEHYDE SOLUTION
2.1 Substances
Synonyms : Ethanal, Acetic aldehyde, Ethyl aldehyde, solution
Formula : C2H4O
Molecular weight : 44.05 g/mol
CAS-No. : 75-07-0
EC-No. : 200-836-8
Index-No. : 605-003-00-6
For the full text of the H-Statements mentioned in this Section, see Section 16.
For the full text of the H-Statements mentioned in this Section, see Section 16.
ACETALDEHYDE SOLUTION
Hazard statement(s)
H225 Highly flammable liquid and vapour.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H351 Suspected of causing cancer.
Precautionary statement(s)
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P261 Avoid breathing vapours.
P281 Use personal protective equipment as required.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
ACETALDEHYDE SOLUTION
ACETALDEHYDE SOLUTION
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash
and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Full contact
Material: butyl-rubber
Minimum layer thickness: 0.3 mm
Break through time: 480 min
Material tested:Butoject® (KCL 897 , Size M)
Splash contact
Material: butyl-rubber
Minimum layer thickness: 0.3 mm
Break through time: 480 min
Material tested:Butoject® (KCL 897 , Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test
method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must be
evaluated by an industria situation of anticipated use by our customers. It should not be construed as
offering an approval for any specific use scenario.
Body Protection
Complete suit protecting against chemicals, Flame retardant antistatic protective clothing., The type of
protective equipment must be selected according to the concentration and amount of the dangerous
substance at the specific workplace
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use (US) or type AXBEK (EN
14387) respirator cartridges as a backup to engine protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such as
NIOSH (US) or CEN (EU).
ACETALDEHYDE SOLUTION
10.1 Reactivity
No data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
Heat, flames and sparks. Extremes of temperature and direct sunlight.
10.5 Incompatible materials
No data available
10.6 Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides
Other decomposition products - No data available
In the event of fire: see section 5
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: 2B - Group 2B: Possibly carcinogenic to humans (Acetaldehyde)
IARC: 2B - Group 2B: Possibly carcinogenic to humans (Acetaldehyde)
ACETALDEHYDE SOLUTION
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: data available
12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Other adverse effects
Harmful to aquatic life.
Contaminated packaging
Dispose of as unused product.
14.1 UN number
ADR/RID: 1089 IMDG: 1089 IATA: 1089
14.2 UN proper shipping name
ADR/RID: FLAMMABLE LIQUID, N.O.S. (Acetaldehyde)
IMDG: FLAMMABLE LIQUID, N.O.S. (Acetaldehyde)
IATA: Flammable liquid, n.o.s. (Acetaldehyde)
14.3 Transport hazard class(es)
ADR/RID: 3 IMDG: 3 IATA: 3
PT.SMART-LAB INDONESIA MSDS – ACETALDEHYDE Page 6
MATERIAL SAFETY DATA SHEET
ACETALDEHYDE SOLUTION
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.2 Chemical safety assessment
For this product a chemical safety assessment was not carried out
HMIS (U.S.A.):
Health Hazard: 2
Fire Hazard: 3
Reactivity: 0
Personal Protection: J
National Fire Protection Association (U.S.A.):
Health: 2
Flammability: 3
Reactivity: 0
Further information
The information above is believed to be accurate and represents the best information currently available to us.
However, we make no warranty of merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users should make their own investigations
to determine the suitability of the information for their particular purposes. In no event shall Smart-lab be liable
for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental,
consequential or exemplary damages, howsoever arising, even if Smart-lab has been advised of the possibility of
such damages.