Professional Documents
Culture Documents
I. TECHNICAL PARAMETER
Model DHB-40
Type Continuous Hot Mix
Capacity 40 Tons Per Hour (Standard Working Condition, learn more)
Drying & Mixing Drum Φ1200*5200mm
Fuel Consumption diesel consumption: 5.5-7.0 kg /ton
Weighing Precision hot aggregate: ±0.5%; bitumen: ±0.3%
Hot Asphalt Temperature 130℃-165℃(adjustable)
Air Emissions ≤100mg/Nm³
Working Noise ≤70db(A)
Operation Full Auto/Manual Operation
Installation Power 89kw
Electrical Design 220V/380V-50Hz(adjustable)
Plant Covering Area Length: 30m, width: 16m, max. height point: 6m
Lay-Out/ Electric Circuit Diagram; Chinese-English Operation Manual;
Documents
Qualification Certificate
III. CONFIGURATION
DHB-40 Specification QTY Picture
3 storage bins, volume: 4m³*3=12m³; unload height:
3
2.78m
3. Aggregate Feeding
aggregate feeding belt B500, motor power: 4kw 1
Belt
4. Bitumen Supply
all bitumen pipe, small steam boiler 1
System
fuel tank 5t 1
7. Mixed Asphalt
bucket elevator, motor power: 5.5kw 1
Elevator
level indicator 1
8. Mixed Asphalt
Storage Silo temperature sensor 1
Accessories 1
11. Additional supply
working tools 1
南阳市辽原筑路机械有限公司
Nanyang Liaoyuan Road Construction Machinery Co., Ltd
--Note--
Standard working condition mentioned contains the following factors
A. Environmental temperature is 20 ℃ with standard atmospheric pressure; altitude ≤2000m;
B. Average moisture content of cold aggregate <5%;
C. Hot aggregate temperature <160 ℃;
D. Finished materials is medium-grained, the stone volume-weight ≥1600kg/m3;
E. Sand content <35%;
F. The ratio of aggregate shall meet the national standard. Dust content of cold aggregate ≤3%;
G. Cold aggregate should be clean enough without too much dirt or other material. Cold aggregate gradation should be
continuous;
H. Cold aggregate shall not contain large amounts of oversized material, otherwise it will cause blocking, resulting in
reduced ability to supply aggregate;
I. Moisture content of powder must be less than 0.5%, and there should be no lumping or arching, otherwise it will cause
supplying interruption or lag, which can affect the productivity;
南阳市辽原筑路机械有限公司
Nanyang Liaoyuan Road Construction Machinery Co., Ltd
IV. CERTIFICATES