Professional Documents
Culture Documents
Electrical Tools
Electrical Tools
1.5.16 Sot I
c 1.5.17
Spanner: Socket AF (metric size) complete set (box spanner) upto 24 mm
Wrench, pipe 10" Nos. I
1.5.18
Files and Handles: 10" half-round, 6" fine flat, 6"x1l4" Sq. & 6 x 114" Round
Sot I
1.6.9 Allen key, complete set, Imperial sizes uplO S/8" Sot I
1.6.10 Spanner, adjustable, 6" and ]0" Sot I
1.6.11 Spanner, BSW upto 1/2" complete set (combined) Sot I
1.6.12 Spanner, AF uplO 3/4" complete set DE Sot I
1.6.13 Spanner, Metric upto 21mm complete set DE Set I
1.6.14 Spanner, BA, 0-6 BA Sot I
1.6.15 Spanner: Socekl BA 0-6 BA Sot I
1.6.16
Spanner: Socket AF (metric size) complete set (box spanner) upto 18 mm
Sot I
1.6.18 Sot I
Files and Handles: 10" half-round, 6" fine flat, 6"x1l4" Sq. & 6 x 114" Round
1.6.19 Hammer - 1 112 Ibs. Nos. I
1.6.20 Hammer Brass- 2 Ibs. Nos. I
1.6.21 Hammer, Rubber, 3/4" lb. Nos. I
1.6.22 Chisel, cold 112" Nos. I
1.6.23 Punch, Centre Nos. I
1.6.24 Knife Nos. I
1.6.25 Tape, measuring - 9 fect Nos. I
1.6.26 Rule, steel- 6" Nos. I
1.6.27 Brush-I" Nos. I
1.6.28 Scrapper, flat - 6 " Nos. I
1.6.29 Scriber 7" Nos. I
1.6.30 Junior Hacksaw Nos. I
1.6.31 Hacksaw Frame - 12 Nos. I
1.6.32 Bmsh, wire Nos. I
1.6.33 BA Box Spanner Sot I
1.6.34 Scrapper, flat - 2 " Nos. I
1.6.35 Monkey Plier, small Nos. I
1.6.36 Wire stripper Nos. I
1.6.37 Torch Light suitable for hazardous areas Nos. I
\
Page 10 of 16
APPENDlX-C-6 TO CONTRACT SPECIFICATION
- for-
MAINTENANCE SERVICES OF PRODUCTION FACILITIES IN NORTH KUWAIT AREAS
1.7.16 Sot I
Spanner: Socket AF (metric size) complete set (box spanner) upto 32 mm
1.7.17 Wrench, pipe 10" Nos. I
1.7.18 Sot I
Files and Handles : 6" & 10" half-round, 6" & 10" fine flat, 6 x 1/4" square, 6" x 112" & 6" x 114" half round
1.7.19 Hammer - 1 112 lbs. . Nos. I
1.7.20 Hanuner, Brass -2 lbs. Nos. I
1.7.21 / Hammer, Brass -7 lbs. Nos. I
1.7.22 Hammer Mallet- 2 lbs. Nos. I
1.7.23 Hammer, Rubber -3/4 lbs. Nos. I
1.7.24 Chisel, cold 112" & 3/4" Sot I
1.7.25 Punch, Centre Nos. I
1.7.26 Knife Nos. I
1.7.27 Tape, measuring - 9 feet Nos. I
1.7.28 Rule, steel- 6" & 12" Nos. I
1.7.29 Brush-I" Nos. I
c 1.7.30
1.7.31
Scrapper, flat - 6 "
Scriber 7"
Nos.
Nos.
I
I
1.7.32 Junior Hacksaw Nos. I
1.7.33 Hacksaw Frame 12" Nos. I
1.7.34 Hole Punch upto 20 mm. Sot I
1.7.35 Circip Remover 4" & 8" Sot I
1.7.36 Vernier Calliper Nos. I
1.7.37 Outside Calliper 6" Nos. I
1.7 .38 Inside Calliper 6" Nos. I
1.7.39 Devider 6" Nos. I
1.7.40 Feeler gauge Sot I
1.7.41 Tri-square 6" Nos. I
1.7.42 Brass rod (round) 112" x 10" Nos. I
1.7.43 Tin men cutter Nos. I
1.7.44 Round scrapper Nos. I
1.7.45 Spirit level Nos. I
1.7.46 Ring spanner set (Metric), upto 32 mm. Set I
1.7 .47 Ring spanner set (BSW), upto I 112" Sot I
1.7.48 Brush, wire Nos. I
1.7.49 Torch light suitable for hazardous areas Nos. I