You are on page 1of 60

National Crane Series NBT50

Product Guide

Features
• 31,1 m (102 ft) four-section
full power boom or optional
39,01 m (128 ft) five-section
full power boom

• 45,36 t (50 USt) at 2,44 m (8 ft)


rating and 49,90 t (55 USt) at
2,44 m (8 ft)

• Self-lubricating Easy Glide


wear pads

• Hydraulic removable
counterweight system

• Outrigger design eliminates


need for SFO
Features

National Crane NBT50


• 45,36 t (50 USt) maximum capacity
• 41,1 m (135 ft) maximum tip height (main boom)
• 54,6 m (179 ft) maximum tip height (boom with extension)

National Crane NBT55


• 49,90 t (55 USt) maximum capacity
• 41,1 m (135 ft) maximum tip height (main boom) Outriggers
• 54,6 m (179 ft) maximum tip height (boom with extension) Equipped with left, right ground level and in-cab
outrigger controls. The Series NBT50 outriggers
allow quick and easy crane set-up and includes a new
outrigger beam position sensing system that aids the
operator in selecting the right load chart based on the
crane’s outrigger footprint. The front outrigger box has
an X-shaped footprint that eliminates the need for a
single front outrigger.
Dimensions:
Full span:
Front: 7,09 m (23 ft 3 in) Rear: 7,39 m (24 ft 3 in)

Mid span:
Front: 4,72 m (15 ft 6 in) Rear: 4,90 m (16 ft 1 in)

Deluxe operator’s cab Retracted-front and rear: 2,39 m (7 ft 10 in)


The Series NBT50 operator’s cab includes all-steel construction
with acoustical lining and tinted glass throughout, air
conditioning, deluxe seat with arm rest mounted single-axis
electric controllers, windshield and sliding skylight with
electric wipers, diesel heater with defroster, circulating fan, fire
extinguisher, and dual cab mounted work lights.

Four or five-section boom


The Series NBT50 can be equipped with two
different boom lengths 31,1 m (102 ft) and 39,01 m
(128 ft).
Counterweight
Two-piece 1360,8 kg (3000 lb) each (total 2721,6
kg [6000 lb]) hydraulically removable counterweight
slabs. Removable counterweight slabs can be stowed
on front outrigger box for roading.
Features

National Crane is proud to introduce the Series NBT50 crane


The Series NBT50 represents the pinnacle of machine performance, combining the latest in both
hydraulic and electronic machine control. This new product provides premium operator comfort
with the latest Manitowoc cab design, simplified machine setup with no need for an SFO and
front bumper control of the hoist(s).

• The cable follower will keep constant tension on the rope reducing the potential for bundling

• Speedy-reeve boom tip and sheave blocks simplify rigging changes by decreasing the time needed
to change line reeving

• Easy Glide boom wear pads reduce the conditions that cause boom chatter and vibration. The net
result is smoother crane operation

• Pressure compensated, load sensing hydraulic system

- PTO mounted axial piston pump

- Superstructure mounted reservoir


with integral suction valve/filter,
return filter, sight gauge, and
temperature gauge

- Oil cooler with 406 mm (16 in) fan


and temperature sensor

- Pressure transducers integral to the


lift cylinder holding valve

• LMI system features a 178 mm


(7 in) graphical, color display.
Real-time crane information is
displayed with numerous operator
features such as soft metric load
chart conversion, hydraulic filter change reminders and an electronic hour meter. LMI system also
displays key truck diagnostics such as fuel level, coolant temperature and DPF status

• The display console allows each crane control function to be set independently to reduce speed
(100%, 75%, 50%, and 30%)

• Dual axis controls are optional for superior operator control, along with standard air conditioning,
a diesel heater and ergonomic seats
Contents

Specifications 5
Weights 7
Dimensions 8
Working range - 102 ft boom 9
Load charts - NBT50/55 102 ft boom, 0 lb counterweight 10
Load charts - NBT50/55 102 ft boom, 3000 lb counterweight 18
Load charts - NBT55 102 ft boom, 6000 lb counterweight 26
Working range - 128 ft boom 34
Load charts - NBT50/55 128 ft boom, 0 lb counterweight 35
Load charts - NBT50/55 128 ft boom, 3000 lb counterweight 43
Load charts - NBT55 128 ft boom, 6000 lb counterweight 51
Accessories 59
Specifications
Boom and extension combinations data
NBT50 Series Available in two basic models:

NBT50-102: Equipped with a 9,51 m - 31,1 m (31.2 ft - 102 ft) four-section boom. This model can be equipped with an optional 7,9 m
(26 ft) fixed offsettable extension, offering a maximum tip height of 41,1 m (135 ft) and a 7,9 m - 13,7 m (26 ft- 45 ft) extension, providing
a maximum tip height of 46,9 m (154 ft).

9,51 m - 31,1 m (31.2 ft - 102 ft) four-section full power boom FJ-OS 7,9 m (26 ft) fixed offsettable at 0° and 30° manual extension

9,51 m - 31,1 m (31.2 ft - 102 ft) four-section boom FJM-OS 7,9 m - 13.7 m (26 ft - 45 ft) two-section offsettable at 0°
and 30° manual extension

NBT50-128: Equipped with a 9,7 m - 39,0 m (31.7 ft - 128 ft) five-section boom. This model can be equipped with an optional 7,9 m (26
ft) fixed offsettable extension offering a maximum tip height of 48,9 m (161.0 ft) and a 7,9 m - 13,7 m (26 ft - 45 ft) two-section offsettable
extension, providing a maximum tip height of 54,6 m (179 ft)

9,7 m - 39,0 m (31.7 ft - 128 ft) five-section full-power boom FJ-OS 7,9 m (26 ft) fixed offsettable at 0° and 30°

9,7 m - 39,0 m (31.7 ft - 128 ft) five-section full power boom FJM-0S 7,9 m - 13,7 m (26 ft - 45 ft) two-section offsettable 0° and
30° manual extension

NBT55 - 102: Equipped with a 9,51 m - 31,1 m (31.2 ft - 102 ft) four-section boom. This model can be equipped with an optional 7,9 m
(26 ft) fixed offsettable extension, offering a maximum tip height of 41,1 m (135 ft) and a 7,9 m - 13,7 m (26 ft- 45 ft) extension, providing
a maximum tip height of 46,9 m (154 ft).

9,51 m - 31,1 m (31.2 ft - 102 ft) four-section full power boom FJ-OS 7,9 m (26 ft) fixed offsettable at 0° and 30° manual extension

9,51 m - 31,1 m (31.2 ft - 102 ft) four-section boom FJM-OS 7,9 m - 13.7 m (26 ft - 45 ft) two-section offsettable at 0°
and 30° manual extension

NBT55-128: Equipped with a 9,7 m - 39,0 m (31.7 ft - 128 ft) five-section boom. This model can be equipped with an optional 7,9 m (26
ft) fixed offsettable extension offering a maximum tip height of 48,9 m (161.0 ft) and a 7,9 m - 13,7 m (26 ft - 45 ft) two-section offsettable
extension, providing a maximum tip height of 54,6 m (179 ft)

9,7 m - 39,0 m (31.7 ft - 128 ft) five-section full-power boom FJ-OS 7,9 m (26 ft) fixed offsettable at 0° and 30°

9,7 m - 39,0 m (31.7 ft - 128 ft) five-section full power boom FJM-0S 7,9 m - 13,7 m (26 ft - 45 ft) two-section offsettable 0° and
30° manual extension

Note: Maximum tip is measured with outriggers/stabilizers fully extended.


Series NBT50 5
Specifications
NBT50 Series provisional winch data
• All winch pulls and speeds
are shown on the fourth
layer. 1 part line 2 part line 3 part line 4 part line 5 part line 6 part line 7 part line 8 part line 9 part line 10 part
• Winch line pulls would max. pull max. pull max. pull max. pull max. pull max. pull max. pull max. pull max. pull line max.
increase on the first, pull
second, and third layers.
• Winch line speed would
decrease on the first,
second, and third layers.
• Winch line pulls may
be limited by the winch
capacity or the ANSI 5 to 1
cable safety factor.

Standard Cable Average


planetary supplied breaking
winch strength 1 sheave 3 sheave 5 sheave
Low speed 16 mm 25 583 kg 5103 kg 10 206 kg 15 309 kg 20 412 kg 25 515 kg 30 618 kg 35 721 kg 40 824 kg 45 359 kg 48 895 kg
(5/8 in) (56,400 lb) (11,250 lb) (22,500 lb) (33,750 lb) (45,000 lb) (56,250 lb) (67,500 lb) (78,750 lb) (90,000 lb) (100,000 lb) (110,000 lb)
diameter
rotation 58,2 m/min 28,9 m/min 14,2 m/min 17,3 m/min 11,6 m/min 9,4 m/min 8,2 m/min 7,0 m/min 6,4 m/min 5,8 m/min
resistant (191 fpm) (95 fpm) (63 fpm) (47 fpm) (38 fpm) (31 fpm) (27 fpm) (23 fpm) (21 fpm) (19 fpm)
IWRC

High speed 16 mm 25 583 kg 2268 kg 4536 kg 6804 kg 9072 kg 11 340 kg 13 608 kg 15 876 kg 18 144 kg 20 412 kg 22 680 kg
(5/8 in) (56,400 lb) (5000 lb) (10,000 lb) (15,000 lb) (20,000 lb) (25,000 lb) (30,000 lb) (35,000 lb) (40,000 lb) (45,000 lb) (50,000 lb)
diameter
rotation 116,7 m/min 58,2 m/min 38,7 m/min 28,9 m/min 23,2 m/min 19,2 m/min 16,5 m/min 14,3 m/min 12,8 m/min 11,6 m/min
resistant (383 fpm) (191 fpm) (127 fpm) (95 fpm) (76 fpm) (63 fpm) (54 fpm) (47 fpm) (42 fpm) (38 fpm)
IWRC

Winch Fourth layer pull Allowable cable pull

Standard planetary and auxiliary planetary 2268 kg (5000 lb) high speed 5117 kg (11,280 lb)
5117 kg (11,280 lb) low speed 5117 kg (11,280 lb)

Loadline deduct
Aux boom nose 36 kg (80 lb)
7 USt Downhaul weight 78 kg (171 lb)
20 USt 1-sheave block 181 kg (400 lb)
40 USt 3-sheave block 272 kg (500 lb)
55 USt 5-sheave block 498 kg (1098 lb)

6
Weights
Weight and Center of Gravity (CG) estimates (see notes)
Standard NBT Horizontal CG Weight with fluids CWT Pinned CWT Stowed
Configuration mm (in) kg (lb) (# slabs) (# slabs)
NBT55102 348 (13.7) 20 789 (45,832) 2 0
NBT55102 803 (31.6) 20 789 (45,832) 1 1
NBT55102 1267 (49.9) 20 789 (45,832) 0 2
NBT50102 616 (24.3) 19 421 (42,816) 1 0
NBT50102 1113 (43.8) 19 421 (42,816) 0 1
NBT50102 1011 (39.8) 17,710 (39,044) 0 0
NBT55128 486 (19.1) 21 837 (48,142) 2 0
NBT55128 919 (36.2) 21 837 (48,142) 1 1
NBT55128 1361 (53.6) 21 837 (48,142) 0 2
NBT50128 749 (29.5) 20 469 (45,126) 1 0
NBT50128 1221 (48.0) 20 469 (45,126) 0 1
NBT50128 1134 (44.6) 18 758 (41,354) 0 0

Weight and CG Estimate Notes:


1. Information provided is for reference only.

2. Weight and CG data is applicable for a standard machine:


102 ft or 128 ft boom
2/3 part lineblock included
Main hoist only (auxiliary hoist IPO CWT present)
STD decking with fixed access ladder
No extension equipped
No optional turret access step
No auxiliary nose or optional hook blocks.

3. All counterweight configurations are shown in table


Pinned = attached to cylinders and turret (in use)
Stowed = attached to torsion box (not in use)
“2” = Top and bottom slab(s)
“1” =Top or bottom slab only
“0” = No slab pinned and/or stowed
If both stowed and pinned colums are “0” the counterweight is physically removed from the machine. IPO
counterweight is also assumed removed in this case (if no auxiliary hoist is equipped).

For more information about mounting configuration options, please contact the factory or your local
National Crane dealer.

Series NBT50 7
Dimensions

1657 (65) 2946 (116)


1276 (50)
Top cwt slab CL Rotation
(50/55)

Bottom
cwt slab 649 (26)
Front
(55)
lifting
lugs
768 (30) S/S Hyd reservoir 449 (18)

Rear
lifting
lugs
Bolted structural bumper
attached to truck frame
2126 (84)
102 ft boom 128 ft boom
9560 (376) Retracted 9719 (383) Retracted 1542 (61)
31 090 (1224) Extended 39 014 (1536) Extended

638
(25)
1942 (76) 55 Cwt
3568 (140) Chassis cab 869 (34)
clearance 50 Cwt

3654 (144)

HCG 3X Welded/bolted
Welded/bolted flex plate
900 (35) Clamped stud shear plate connection 300 (12)
Max Chassis connection connection
102 ft boom 128 ft boom 3303 (130)
width (front only) CL Rotation
4143 (163) 4302 (169)
7261 (286)

8
Working range
NBT50/55-102: 102 ft main boom, full span outriggers, with extensions

(Boom deflection not shown)


160 0° Offset 45' Ext.
150
30° Offset
140
26' Ext.
130
70°
120

Boom length and extension in feet


110 102
60° 94
Height from ground in feet

100
50° 86
90 78
80 40° 70
62
70
30° 54
60 46
50 38
20°
31.2
40

30 10° 75.5°
Max boom
20 angle

10 0°

0
140 120 100 80 60 40
150 130 110 90 70 50 30 10 Axis of rotation
Operating radius in feet from axis of rotation

Dimensions are for largest


furnished hook block and
(6' 9") (8' 7") headache ball with
anti-two block activated.

*This drawing shows the physical reach of the machine. Always refer to the load
chart to see which portions of this diagram are valid for the specific machine
configuration and where the loads are structurally or stability limited.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 9
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH NO COUNTERWEIGHT
31.2 FT. - 102 FT. BOOM
NBT50/55: 102 ft main boom, 360°, outriggers fully extended, no counterweight
ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #8001
in Main boom length in feet
feet 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
100,000
8
(68.3)
92,900 51,200 50,350
10
(64.2) (69.2) (73.1)
77,450 51,200 50,350 50,250
12
(59.9) (65.8) (70.4) (73.7)
61,500 51,200 50,350 50,250 50,000
15
(53.0) (60.7) (66.4) (70.3) (73.3)
45,100 45,450 45,750 45,950 46,100 41,000 34,350
20
(39.8) (51.3) (59.2) (64.5) (68.4) (71.3) (73.7)
31,400 34,800 35,100 35,350 35,500 35,650 30,100 26,750 23,800
25
(20.0) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
26,350 26,850 27,200 27,450 27,600 26,750 23,800 21,250 18,950
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71.0) (72.9)
19,850 20,150 20,400 20,550 20,700 20,900 18,950 17,000
35
(31.8) (44.2) (51.8) (57.2) (61.4) (64.9) (67.7) (69.9)
15,250 15,600 15,800 15,950 16,100 16,250 16,350 15,350
40
(15.1) (35.5) (45.3) (51.9) (56.9) (60.9) (64.2) (66.9)
12,400 12,600 12,750 12,850 13,000 13,100 13,200
45
(24.4) (38.1) (46.3) (52.2) (56.8) (60.5) (63.7)
10,350 10,500 10,600 10,750 10,850 10,900
50
(30.3) (40.7) (47.6) (52.9) (57.0) (60.5)
8500 8650 8800 8900 9000 9050
55
(18.5) (33.6) (42.2) (48.3) (53.1) (57.0)
7200 7350 7450 7500 7600
60
(24.7) (36.1) (43.4) (49.0) (53.4)
6000 6150 6250 6300 6400
65
(9.8) (28.9) (38.1) (44.5) (49.5)
5150 5250 5350 5400
70
(19.3) (31.9) (39.7) (45.5)
4400 4500 4550
75
(24.4) (34.4) (41.1)
3700 3800 3850
80
(13.1) (28.1) (36.3)
3150 3250
85
(20.0) (30.9)
2700
90
(24.4)
2200
95
(15.1)
*2000
97
(8.7)
Minimum boom angle (° ) for indicate d le ngth (no load) 0
Maximum boom le ngth (ft ) at 0° boom angle (no load) 102
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H
12,450 9250 6750 5000 3700 2700 1950 1300 700

(27) (33.8) (41.8) (49.8) (57.8) (65.8) (73.8) (81.8) (89.8)
NOTE: ( ) Reference radii in feet. 80035269

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
10 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH NO COUNTERWEIGHT
NBT50/55:- 102'
31.2' BOOM
102 ft main WITH
boom 26'
withFIXED or 26-45'
stowed TELE EXTENSION
extension, STOWED
360°, outriggers fully extended, no
counterweight ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #8002
in Main boom length in feet
feet 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
98,900
8
(68.3)
91,800 50,300 49,600
10
(64.2) (69.2) (73.1)
76,350 50,300 49,600 49,650
12
(59.9) (65.8) (70.4) (73.7)
60,400 50,300 49,600 49,650 49,450
15
(53.0) (60.7) (66.4) (70.3) (73.3)
44,000 44,550 45,000 45,350 45,550 40,550 33,950
20
(39.8) (51.3) (59.2) (64.5) (68.4) (71.3) (73.7)
30,300 33,900 34,350 34,750 34,950 35,200 29,700 26,350 23,450
25
(20.0) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
25,450 26,100 26,600 26,900 27,150 26,350 23,400 20,900 18,650
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71.0) (72.9)
19,100 19,550 19,850 20,100 20,300 20,500 18,600 16,700
35
(31.8) (44.2) (51.8) (57.2) (61.4) (64.9) (67.7) (69.9)
14,500 15,000 15,250 15,500 15,700 15,850 16,000 15,050
40
(15.1) (35.5) (45.3) (51.9) (56.9) (60.9) (64.2) (66.9)
11,800 12,050 12,300 12,450 12,600 12,750 12,900
45
(24.4) (38.1) (46.3) (52.2) (56.8) (60.5) (63.7)
9800 10,050 10,200 10,350 10,500 10,600
50
(30.3) (40.7) (47.6) (52.9) (57.0) (60.5)
7950 8200 8400 8500 8650 8750
55
(18.5) (33.6) (42.2) (48.3) (53.1) (57.0)
6750 6950 7050 7150 7300
60
(24.7) (36.1) (43.4) (49.0) (53.4)
5550 5750 5850 5950 6100
65
(9.8) (28.9) (38.1) (44.5) (49.5)
4750 4850 5000 5100
70
(19.3) (31.9) (39.7) (45.5)
4000 4150 4250
75
(24.4) (34.4) (41.1)
3300 3450 3550
80
(13.1) (28.1) (36.3)
2800 2950
85
(20.0) (30.9)
2400
90
(24.4)
1900
95
(15.1)
*1700
97
(8.7)
Minimum boom angle (° ) for indicate d le ngth (no load) 0
Maximum boom le ngth (ft ) at 0° boom angle (no load) 1 02
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G
11,350 8350 6000 4400 3150 2250 1550 900

(27) (33.8) (41.8) (49.8) (57.8) (65.8) (73.8) (81.8)
NOTE: ( ) Reference radii in feet. 80035270

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 11
Load RATEDchart
LIFTING CAPACITIES IN POUNDS WITH NO COUNTERWEIGHT
31.2' - 102' BOOM WITH 26' FIXED ERECTED or 26-45' EXT ERECTED, RETRACTED
ON OUTRIGGERS FULLY EXTENDED - 360°
NBT50/55: 102 ft main boom with extension erected and retracted, 360°, outriggers fully extended,
no counterweight

Radius #8017
in Main boom length in feet
feet 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
97,450
8
(68.3)
90,350 48,800 48,050
10
(64.2) (69.2) (73.1)
74,900 48,800 48,050 48,000
12
(59.9) (65.8) (70.4) (73.7)
58,950 48,800 48,050 48,000 47,800
15
(53.0) (60.7) (66.4) (70.3) (73.3)
42,550 43,050 43,450 43,700 43,900 38,850 32,250
20
(39.8) (51.3) (59.2) (64.5) (68.4) (71.3) (73.7)
28,850 32,400 32,800 33,100 33,300 33,500 28,000 24,650 21,750
25
(20.0) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
23,950 24,550 24,950 25,250 25,450 24,650 21,700 19,200 16,900
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71.0) (72.9)
17,550 17,900 18,200 18,400 18,600 18,800 16,900 14,950
35
(31.8) (44.2) (51.8) (57.2) (61.4) (64.9) (67.7) (69.9)
12,950 13,350 13,600 13,800 14,000 14,150 14,300 13,300
40
(15.1) (35.5) (45.3) (51.9) (56.9) (60.9) (64.2) (66.9)
10,150 10,400 10,600 10,750 10,900 11,050 11,150
45
(24.4) (38.1) (46.3) (52.2) (56.8) (60.5) (63.7)
8150 8350 8500 8650 8800 8850
50
(30.3) (40.7) (47.6) (52.9) (57.0) (60.5)
6300 6500 6700 6800 6950 7000
55
(18.5) (33.6) (42.2) (48.3) (53.1) (57.0)
5050 5250 5350 5450 5550
60
(24.7) (36.1) (43.4) (49.0) (53.4)
3850 4050 4150 4250 4350
65
(9.8) (28.9) (38.1) (44.5) (49.5)
3050 3150 3300 3350
70
(19.3) (31.9) (39.7) (45.5)
2300 2450 2500
75
(24.4) (34.4) (41.1)
1600 1750 1800
80
(13.1) (28.1) (36.3)
1100 1200
85
(20.0) (30.9)
650
90
(24.4)
Minimum boom angle (°) for indicated length (no load) 0 2 5 12 18
Maximum boom length (ft ) at 0° boom angle (no load) 70
NOTE: ( ) Boom angles are in degrees.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D 70-E
9900 6850 4450 2750 1500 550

(27) (33.8) (41.8) (49.8) (57.8) (65.8)
NOTE: ( ) Reference radii in feet. 80035271

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
12 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH NO COUNTERWEIGHT
31.2' - 102' BOOM WITH 26-45' EXT ERECTED, EXTENDED
NBT50/55: 102 ft main boom with extension erected and extended, 360°, outriggers fully extended,
no counterweight ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #8018
in Main boom length in feet
feet 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
97,050
8
(68.3)
89,950 48,450 47,800
10
(64.2) (69.2) (73.1)
74,500 48,450 47,800 47,800
12
(59.9) (65.8) (70.4) (73.7)
58,550 48,450 47,800 47,800 47,650
15
(53.0) (60.7) (66.4) (70.3) (73.3)
42,150 42,700 43,200 43,500 43,750 38,700 32,100
20
(39.8) (51.3) (59.2) (64.5) (68.4) (71.3) (73.7)
28,450 32,050 32,550 32,900 33,150 33,350 27,850 24,550 21,600
25
(20.0) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
23,600 24,300 24,750 25,100 25,300 24,500 21,600 19,050 16,800
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71.0) (72.9)
17,300 17,700 18,050 18,250 18,450 18,700 16,750 14,850
35
(31.8) (44.2) (51.8) (57.2) (61.4) (64.9) (67.7) (69.9)
12,700 13,150 13,450 13,650 13,850 14,050 14,150 13,200
40
(15.1) (35.5) (45.3) (51.9) (56.9) (60.9) (64.2) (66.9)
9950 10,250 10,450 10,600 10,800 10,900 11,050
45
(24.4) (38.1) (46.3) (52.2) (56.8) (60.5) (63.7)
8000 8200 8350 8550 8650 8750
50
(30.3) (40.7) (47.6) (52.9) (57.0) (60.5)
6150 6350 6550 6700 6800 6900
55
(18.5) (33.6) (42.2) (48.3) (53.1) (57.0)
4900 5100 5250 5300 5450
60
(24.7) (36.1) (43.4) (49.0) (53.4)
3700 3900 4050 4100 4250
65
(9.8) (28.9) (38.1) (44.5) (49.5)
2900 3050 3150 3250
70
(19.3) (31.9) (39.7) (45.5)
2200 2300 2400
75
(24.4) (34.4) (41.1)
1500 1600 1700
80
(13.1) (28.1) (36.3)
950 1100
85
(20.0) (30.9)
550
90
(24.4)
Minimum boom angle (°) for indicated length (no load) 0 3 5 12 22
Maximum boom length (ft ) at 0° boom angle (no load) 70
NOTE: ( ) Boom angles are in degrees.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D
9500 6500 4200 2550 1350

(27) (33.8) (41.8) (49.8) (57.8)
NOTE: ( ) Reference radii in feet. 80035272

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 13
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH NO COUNTERWEIGHT
31.2 FT. - 102 FT. BOOM
NBT50/55: 102 ft main boom, over rear, outriggers fully extended, no counterweight
ON OUTRIGGERS FULLY EXTENDED - OVER REAR

Radius #8003
in Main boom length in feet
feet 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
100,000
8
(68.3)
92,900 51,200 50,350
10
(64.2) (69.2) (73.1)
77,450 51,200 50,350 50,250
12
(59.9) (65.8) (70.4) (73.7)
61,500 51,200 50,350 50,250 50,000
15
(53.0) (60.7) (66.4) (70.3) (73.3)
45,100 45,450 45,750 45,950 46,100 41,000 34,350
20
(39.8) (51.3) (59.2) (64.5) (68.4) (71.3) (73.7)
31,400 34,800 35,100 35,350 35,500 35,650 30,100 26,750 23,800
25
(20.0) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
27,600 27,950 28,150 28,350 28,450 26,750 23,800 21,250 18,950
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71.0) (72.9)
22,200 22,400 22,600 22,750 22,900 21,250 18,950 17,000
35
(31.8) (44.2) (51.8) (57.2) (61.5) (64.9) (67.7) (69.9)
*15,950 17,750 17,950 18,100 18,250 18,350 17,100 15,350
40
(15.1) (35.6) (45.4) (52.0) (57.0) (61.1) (64.3) (66.9)
14,350 14,550 14,700 14,800 14,950 15,050 13,950
45
(24.4) (38.2) (46.4) (52.3) (56.9) (60.7) (63.7)
12,050 12,200 12,300 12,400 12,500 12,550
50
(29.5) (40.1) (47.2) (52.6) (56.9) (60.5)
10,150 10,350 10,450 10,550 10,650 10,700
55
(18.5) (33.7) (42.3) (48.5) (53.3) (57.3)
8750 8850 8950 8050 9100
60
(24.8) (36.2) (43.6) (49.2) (53.6)
*6400 7600 7650 7750 7800
65
(9.8) (29.0) (38.2) (44.7) (49.8)
6500 6600 6650 6750
70
(19.4) (32.1) (39.9) (45.7)
5650 5750 5800
75
(24.6) (34.6) (41.4)
4850 4950 5050
80
(13.2) (28.3) (36.6)
4300 4350
85
(20.2) (31.1)
3750
90
(24.6)
3200
95
(15.3)
*2000
97
(8.7)
Minimum boom angle (° ) for indicate d le ngth (no load) 0
Maximum boom le ngth (ft ) at 0° boom angle (no load) 102
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H
12,450 9250 6750 5000 3700 2700 1950 1300 700

(27) (33.8) (41.8) (49.8) (57.8) (65.8) (73.8) (81.8) (89.8)
NOTE: ( ) Reference radii in feet. 80035273

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
14 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH NO COUNTERWEIGHT
31.2' - 102' BOOM WITH 26' FIXED or 26-45' TELE EXTENSION STOWED
NBT50/55: 102 ft main boom with extension stowed, over rear, outriggers fully extended,
no counterweight ON OUTRIGGERS FULLY EXTENDED - OVER REAR

Radius #8004
in Main boom length in feet
feet 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
98,900
8
(68.3)
91,800 50,300 49,600
10
(64.2) (69.2) (73.1)
76,350 50,300 49,600 49,650
12
(59.9) (65.8) (70.4) (73.7)
60,400 50,300 49,600 49,650 49,450
15
(53.0) (60.7) (66.4) (70.3) (73.3)
44,000 44,550 45,000 45,350 45,550 40,550 33,950
20
(39.8) (51.3) (59.2) (64.5) (68.4) (71.3) (73.7)
30,300 33,900 34,350 34,750 34,950 35,200 29,700 26,350 23,450
25
(20.0) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
26,700 27,200 27,550 27,800 28,000 26,350 23,400 20,900 18,650
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71.0) (72.9)
21,450 21,800 22,050 22,300 22,500 20,850 18,600 16,700
35
(31.8) (44.2) (51.8) (57.2) (61.5) (64.9) (67.7) (69.9)
*15,200 17,150 17,400 17,650 17,850 17,950 16,750 15,050
40
(15.1) (35.6) (45.4) (52.0) (57.0) (61.1) (64.3) (66.9)
13,750 14,000 14,250 14,400 14,550 14,700 13,650
45
(24.4) (38.2) (46.4) (52.3) (56.9) (60.7) (63.7)
11,500 11,750 11,900 12,000 12,150 12,250
50
(29.5) (40.1) (47.2) (52.6) (56.9) (60.5)
9600 9900 10,050 10,150 10,300 10,400
55
(18.5) (33.7) (42.3) (48.5) (53.3) (57.3)
8300 8450 8550 7700 8800
60
(24.8) (36.2) (43.6) (49.2) (53.6)
*5950 7200 7250 7400 7500
65
(9.8) (29.0) (38.2) (44.7) (49.8)
6100 6200 6300 6450
70
(19.4) (32.1) (39.9) (45.7)
5250 5400 5500
75
(24.6) (34.6) (41.4)
4450 4600 4750
80
(13.2) (28.3) (36.6)
3950 4050
85
(20.2) (31.1)
3450
90
(24.6)
2900
95
(15.3)
*1700
97
(8.7)
Minimum boom angle (° ) for indicate d length (no load) 0
Maximum boom le ngth (ft ) at 0° boom angle (no load) 102
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G
11,350 8350 6000 4400 3150 2250 1550 900

(27) (33.8) (41.8) (49.8) (57.8) (65.8) (73.8) (81.8)
NOTE: ( ) Reference radii in feet. 80035274

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 15
Load chart
FT. FIXED AND 26 FT. - 45 FT. TELE OFFSETTABLE BOOM EXTENSION
WITH NO COUNTERWEIGHT

ON OUTRIGGERS
NBT50/55-102: FULLY
Extension EXTENDED360°,
information, - 360°
outriggers fully extended, no counterweight

**26 ft LENGTH 45 ft LENGTH Boom extension capacity notes:


Radius 1. All capacities above the bold line are based on
in #8005 #8007 #8009 #8011 structural strength limitations.
feet 0° 30° 0° 30°
2. 26 ft and 45 ft extension lengths may be used for single
OFFSET OFFSET OFFSET OFFSET
line lifting service.
8500
40 3. Radii listed are for a fully extended boom with the
(71.6)
boom extension erected. For main boom lengths less
8400 5950 5700 than fully extended, the rated loads are determined by
45
(69.5) (75.1) (72.6) boom angle. Use only the column which corresponds
8050 5900 5650 to the boom extension length and offset for which the
50 machine is configured. For boom angles not shown,
(67.2) (72.7) (70.7)
use the rating of the next lower boom angle.
7450 5750 5600
55 Warning: Operation of this machine with heavier
(64.7) (70.3) (68.9)
loads than the capacities listed is strictly prohibited.
7000 5550 5350 3400 Machine tipping with boom extension occurs rapidly
60
(62.3) (67.7) (66.9) (74.8) and without advance warning.
6400 5350 5000 3250
65 4. Boom angle is the angle above or below horizontal of
(59.8) (65.0) (64.7) (72.6)
the longitudinal axis of the boom base section after
5350 5200 4700 3150 lifting rated load.
70
(57.0) (62.3) (62.6) (70.3)
5. Capacities listed are with outriggers properly extended
4500 5050 4,400 3050 and vertical jacks set only.
75
(54.0) (59.4) (60.3) (68.0)
3750 4350 4200 2950
80
(51.0) (56.2) (58.1) (65.5)
3150 3650 3950 2850
85
(47.9) (52.8) (55.7) (63.0)
2600 3000 3400 2800
90
(44.6) (49.3) (53.2) (60.4)
2100 2450 2900 2750
95
(41.1) (45.5) (50.4) (57.7)
1650 1950 2,450 2700
100
(37.3) (41.4) (47.6) (54.9)
1300 1500 2050 2650
105
(33.2) (36.9) (44.6) (51.9)
950 1100 1700 2200
110
(28.6) (31.7) (41.5) (48.4)
650 1400 1800
115
(23.1) (38.2) (44.7)
1100 1450
120
(34.6) (40.6)
850 1100
125
(30.7) (36.0)
600 750
130
(26.2) (30.6)
Min. boom angle
for indicated length 18° 30° 22° 30°
(no load)
Max. boom length
at 0° boom angle 70 ft 70 ft
(no load)
NOTE: ( ) Boom angles are in degrees. 80035283
#LMI operating code. Refer to LMI manual for instructions.
**26 ft capacities are applicable to both 26' fixed and 26' tele
extension.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
16 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
XED AND 26 FT. - 45 FT. TELE OFFSETTABLE BOOM EXTENSION
WITH NO COUNTERWEIGHT
NBT50/55-102: Extension information, over rear, outriggers fully extended, no counterweight
ON OUTRIGGERS FULLY EXTENDED - OVER REAR

**26 ft LENGTH 45 ft LENGTH Boom extension capacity notes:


Radius 1. All capacities above the bold line are based on
in #8006 #8008 #8010 #8012 structural strength limitations.
feet 0° 30° 0° 30°
OFFSET OFFSET OFFSET OFFSET 2. 26 ft and 45 ft extension lengths may be used for single
line lifting service.
8500
40
(71.6)
3. Radii listed are for a fully extended boom with the
8400 5950 5700 boom extension erected. For main boom lengths less
45
(69.5) (75.1) (72.6) than fully extended, the rated loads are determined by
8050 5900 5650 boom angle. Use only the column which corresponds
50 to the boom extension length and offset for which the
(67.2) (72.7) (70.7)
machine is configured. For boom angles not shown,
7450 5750 5600 use the rating of the next lower boom angle.
55
(64.7) (70.3) (68.9)
7000 5550 5350 3400 Warning: Operation of this machine with heavier
60 loads than the capacities listed is strictly prohibited.
(62.3) (67.7) (66.9) (74.8)
Machine tipping with boom extension occurs rapidly
6500 5350 5000 3250
65 and without advance warning.
(59.7) (65.0) (64.7) (72.6)
6000 5200 4700 3150 4. Boom angle is the angle above or below horizontal of
70
(57.0) (62.3) (62.6) (70.3) the longitudinal axis of the boom base section after
5650 5050 4400 3050 lifting rated load.
75
(54.3) (59.4) (60.3) (68.0)
5. Capacities listed are with outriggers properly extended
4950 4800 4200 2950 and vertical jacks set only.
80
(51.5) (56.4) (58.1) (65.5)
4250 4550 3950 2850
85
(48.3) (53.2) (55.7) (63.0)
3650 4050 3750 2800
90
(45.0) (49.7) (53.2) (60.4)
3100 3450 3550 2750
95
(41.5) (45.9) (50.7) (57.7)
2650 2900 3400 2700
100
(37.8) (41.8) (48.0) (54.9)
2200 2400 3000 2650
105
(33.6) (37.3) (45.3) (51.9)
1850 1950 2600 2600
110
(29.0) (32.0) (42.2) (48.6)
1500 2250 2550
115
(23.6) (38.8) (45.1)
1150 1900 2200
120
(16.3) (35.2) (41.0)
1600 1850
125
(31.3) (36.4)
1350 1500
130
(26.8) (30.9)
1100
135
(21.5)
850
140
(14.1)
Min. boom angle
for indicated length 10° 30° 10° 30°
(no load)
Max. boom length
at 0° boom angle 70 ft 70 ft
(no load)
NOTE: ( ) Boom angles are in degrees. 80035285
#LMI operating code. Refer to LMI manual for instructions.
**26 ft capacities are applicable to both 26' fixed and 26' tele
extension.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 17
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 3000 lb COUNTERWEIGHT
31.2 FT. - 102 FT. BOOM
NBT50/55: 102 ft main boom, 360°, full span outriggers,
ON OUTRIGGERS 3000 lb counterweight
FULLY EXTENDED - 360°

Radius #0001 or #1001


in
Main boom length in feet
feet
31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
100,000
8
(68.3)
93,350 51,200 50,350
10
(64.2) (69.2) (73.1)
80,950 51,200 50,350 50,250
12
(59.9) (65.8) (70.4) (73.7)
64,400 51,200 50,350 50,250 50,000
15
(53) (60.7) (66.4) (70.3) (73.3)
47,300 47,650 47,950 48,150 46,450 41,000 34,350
20
(39.8) (51.3) (59.3) (64.5) (68.4) (71.3) (73.7)
31,500 37,050 37,400 37,600 37,800 35,950 30,150 26,800 23,800
25
(20) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
29,000 29,850 30,050 30,250 30,350 26,750 23,800 21,250 18,950
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71) (72.9)
23,600 23,900 24,100 24,250 23,700 21,250 18,950 17,000
35
(31.9) (44.2) (51.8) (57.3) (61.5) (64.9) (67.7) (69.9)
*16,000 18,700 18,900 19,050 19,200 19,100 17,100 15,350
40
(15.1) (35.6) (45.4) (52) (57) (61.1) (64.3) (66.9)
15,050 15,250 15,400 15,500 15,650 15,550 13,950
45
(24.4) (38.2) (46.4) (52.3) (57) (60.8) (63.7)
12,550 12,700 12,800 12,900 13,000 12,700
50
(29.5) (40.1) (47.2) (52.6) (56.9) (60.5)
10,550 10,700 10,800 10,900 11,000 11,100
55
(18.5) (33.7) (42.3) (48.5) (53.3) (57.3)
9050 9150 9250 9350 9400
60
(24.8) (36.2) (43.6) (49.2) (53.6)
*6400 7800 7900 8000 8050
65
(9.8) (29) (38.2) (44.7) (49.8)
6650 6750 6850 6900
70
(19.3) (32.1) (39.9) (45.7)
5800 5900 5950
75
(24.6) (34.5) (41.4)
5000 5100 5150
80
(13.2) (28.3) (36.6)
4350 4450
85
(20.1) (31.1)
3800
90
(24.6)
3250
95
(15.3)
*2000
97
(8.7)
Minimum boom angle (° ) for indicated length (no load) 0
Maximum boom length ( ft) at 0° boom angle (no load) 1 02
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H
12,450 9250 6750 5000 3700 2700 1950 1300 700

( 27) ( 33.8) ( 41.8) (49.8) (57.8) (65.8) (73.8) (81.8) (89.8)
NOTE: ( ) Reference radii in feet. 80025227B

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
18 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
RATED LIFTING CAPACITIES IN POUNDS WITH 3000 lb COUNTERWEIGHT Load chart
31.2' - 102' BOOM WITH 26' FIXED or 26-45' TELE EXTENSION STOWED
ON OUTRIGGERS FULLY EXTENDED - 360°
NBT50/55: 102 ft main boom with extension stowed, 360°, outriggers fully extended,
3000 lb counterweight

Radius #0002 or #1002


in
Main boom length in feet
feet
31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
98,900
8
(68.3)
92,250 50,300 49,600
10
(64.2) (69.2) (73.1)
79,850 50,300 49,600 49,600
12
(59.9) (65.8) (70.4) (73.7)
63,300 50,300 49,600 49,600 49,450
15
(53) (60.7) (66.4) (70.3) (73.3)
46,200 46,750 47,200 47,550 45,900 40,550 33,950
20
(39.8) (51.3) (59.3) (64.5) (68.4) (71.3) (73.7)
30,400 36,150 36,650 37,000 37,250 35,500 29,750 26,400 23,450
25
(20) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
28,100 29,100 29,450 29,700 29,900 26,350 23,400 20,900 18,650
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71) (72.9)
22,850 23,300 23,550 23,800 23,300 20,850 18,600 16,700
35
(31.9) (44.2) (51.8) (57.3) (61.5) (64.9) (67.7) (69.9)
*15,250 18,100 18,350 18,600 18,800 18,700 16,750 15,050
40
(15.1) (35.6) (45.4) (52) (57) (61.1) (64.3) (66.9)
14,450 14,700 14,950 15,100 15,250 15,200 13,650
45
(24.4) (38.2) (46.4) (52.3) (57) (60.8) (63.7)
12,000 12,250 12,400 12,500 12,600 12,400
50
(29.5) (40.1) (47.2) (52.6) (56.9) (60.5)
10,000 10,250 10,400 10,500 10,650 10,800
55
(18.5) (33.7) (42.3) (48.5) (53.3) (57.3)
8600 8750 8850 9000 9100
60
(24.8) (36.2) (43.6) (49.2) (53.6)
*5950 7400 7500 7650 7750
65
(9.8) (29) (38.2) (44.7) (49.8)
6250 6350 6500 6600
70
(19.3) (32.1) (39.9) (45.7)
5400 5550 5650
75
(24.6) (34.5) (41.4)
4600 4750 4850
80
(13.2) (28.3) (36.6)
4000 4150
85
(20.1) (31.1)
3500
90
(24.6)
2950
95
(15.3)
*1700
97
(8.7)
Minimum boom angle (° ) for indicated length (no load) 0
Maximum boom length (ft ) at 0° boom angle (no load) 102
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G
11,350 8350 6000 4400 3150 2250 1550 900

( 27) ( 33.8) ( 41.8) (49.8) (57.8) (65.8) (73.8) (81.8)
NOTE: ( ) Reference radii in feet. 80026917D

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 19
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 3000 lb COUNTERWEIGHT
31.2' - 102' BOOM WITH 26' FIXED ERECTED or 26-45' EXT ERECTED, RETRACTED
ON OUTRIGGERS
NBT50/55: 102 ft main boom with extension erectedFULLY EXTENDED360°,
and retracted, - 360°outriggers fully extended,
3000 lb counterweight

Radius #0017 or #1017


in
Main boom length in feet
feet
31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
97,450
8
(68.3)
90,800 48,800 48,050
10
(64.2) (69.2) (73.1)
78,400 48,800 48,050 48,000
12
(59.9) (65.8) (70.4) (73.7)
61,850 48,800 48,050 48,000 47,800
15
(53) (60.7) (66.4) (70.3) (73.3)
44,750 45,250 45,650 45,900 44,250 38,850 32,250
20
(39.8) (51.3) (59.3) (64.5) (68.4) (71.3) (73.7)
28,950 34,650 35,100 35,350 35,600 33,800 28,050 24,700 21,750
25
(20) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
26,600 27,550 27,800 28,050 28,200 24,650 21,700 19,200 16,900
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71) (72.9)
21,300 21,650 21,900 22,100 21,600 19,150 16,900 14,950
35
(31.9) (44.2) (51.8) (57.3) (61.5) (64.9) (67.7) (69.9)
*13,700 16,450 16,700 16,900 17,100 17,000 15,050 13,300
40
(15.1) (35.6) (45.4) (52) (57) (61.1) (64.3) (66.9)
12,800 13,050 13,250 13,400 13,550 13,500 11,900
45
(24.4) (38.2) (46.4) (52.3) (57) (60.8) (63.7)
10,350 10,550 10,700 10,800 10,950 10,650
50
(29.5) (40.1) (47.2) (52.6) (56.9) (60.5)
8350 8550 8700 8800 8950 9050
55
(18.5) (33.7) (42.3) (48.5) (53.3) (57.3)
6900 7050 7150 7300 7350
60
(24.8) (36.2) (43.6) (49.2) (53.6)
*4250 5700 5800 5950 6000
65
(9.8) (29) (38.2) (44.7) (49.8)
4550 4650 4800 4850
70
(19.3) (32.1) (39.9) (45.7)
3700 3850 3900
75
(24.6) (34.5) (41.4)
2900 3050 3100
80
(13.2) (28.3) (36.6)
2300 2400
85
(20.1) (31.1)
1750
90
(24.6)
1200
95
(15.3)
Minimum boom angle (°) for indicated length (no load) 0 2 5 7 10
Maximum boom le ngth (ft ) at 0° boom angle (no load) 70
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D 70-E
9900 6850 4450 2750 1500 550

( 27) ( 33.8) ( 41.8) (49.8) (57.8) (65.8)
NOTE: ( ) Reference radii in feet. 80026959D

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
20 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 3000 lb COUNTERWEIGHT
31.2' - 102' BOOM WITH 26-45' EXT ERECTED, EXTENDED
NBT50/55: 102 ft main boom with extension erectedFULLY
ON OUTRIGGERS and extended,
EXTENDED360°, outriggers fully
- 360°
extended, 3000 lb counterweight

Radius #0018 or #1018


in
Main boom length in feet
feet
31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
97,050
8
(68.3)
90,400 48,450 47,800
10
(64.2) (69.2) (73.1)
78,000 48,450 47,800 47,800
12
(59.9) (65.8) (70.4) (73.7)
61,450 48,450 47,800 47,800 47,650
15
(53) (60.7) (66.4) (70.3) (73.3)
44,350 44,900 45,400 45,700 44,100 38,700 32,100
20
(39.8) (51.3) (59.3) (64.5) (68.4) (71.3) (73.7)
28,550 34,300 34,850 35,150 35,450 33,650 27,900 24,600 21,600
25
(20) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
26,250 27,300 27,600 27,900 28,050 24,500 21,600 19,050 16,800
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71) (72.9)
21,050 21,450 21,750 21,950 21,450 19,050 16,750 14,850
35
(31.9) (44.2) (51.8) (57.3) (61.5) (64.9) (67.7) (69.9)
*13,450 16,250 16,550 16,750 16,950 16,900 14,900 13,200
40
(15.1) (35.6) (45.4) (52) (57) (61.1) (64.3) (66.9)
12,600 12,900 13,100 13,250 13,450 13,350 11,800
45
(24.4) (38.2) (46.4) (52.3) (57) (60.8) (63.7)
10,200 10,400 10,550 10,700 10,800 10,550
50
(29.5) (40.1) (47.2) (52.6) (56.9) (60.5)
8200 8400 8550 8700 8800 8950
55
(18.5) (33.7) (42.3) (48.5) (53.3) (57.3)
6750 6900 7050 7150 7250
60
(24.8) (36.2) (43.6) (49.2) (53.6)
*4100 5550 5700 5800 5900
65
(9.8) (29) (38.2) (44.7) (49.8)
4400 4550 4650 4750
70
(19.3) (32.1) (39.9) (45.7)
3600 3700 3800
75
(24.6) (34.5) (41.4)
2800 2900 3000
80
(13.2) (28.3) (36.6)
2150 2300
85
(20.1) (31.1)
1650
90
(24.6)
1100
95
(15.3)
Minimum boom angle (°) for indicated length (no load) 0 3 5 7 10
Maximum boom length (ft ) at 0° boom angle (no load) 70
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D
9500 6500 4200 2550 1350

( 27) ( 33.8) ( 41.8) (49.8) (57.8)
NOTE: ( ) Reference radii in feet. 80026960D

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 21
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 3000 lb COUNTERWEIGHT
31.2 FT. - 102 FT. BOOM
ON OUTRIGGERS FULLY EXTENDED - OVER REAR
NBT50/55: 102 ft main boom, over rear, outriggers fully extended, 3000 lb counterweight

Radius #0003 or #1003


in
Main boom length in feet
feet
31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
100,000
8
(68.3)
93,350 51,200 50,350
10
(64.2) (69.2) (73.1)
80,950 51,200 50,350 50,250
12
(59.9) (65.8) (70.4) (73.7)
64,400 51,200 50,350 50,250 50,000
15
(53) (60.7) (66.4) (70.3) (73.3)
47,300 47,650 47,950 48,150 46,450 41,000 34,350
20
(39.8) (51.3) (59.3) (64.5) (68.4) (71.3) (73.7)
31,500 37,050 37,400 37,600 37,800 35,950 30,150 26,800 23,800
25
(20) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
29,000 29,850 30,050 30,250 30,350 26,750 23,800 21,250 18,950
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71) (72.9)
24,450 24,700 24,850 25,000 23,700 21,250 18,950 17,000
35
(31.9) (44.2) (51.8) (57.3) (61.5) (64.9) (67.7) (69.9)
16,000 20,500 20,700 20,850 21,000 19,100 17,100 15,350
40
(15.1) (35.6) (45.4) (52.1) (57.1) (61.1) (64.3) (66.9)
16,750 16,950 17,100 17,200 17,050 15,550 13,950
45
(24.4) (38.2) (46.4) (52.4) (57.1) (60.8) (63.7)
14,150 14,250 14,400 14,500 14,200 12,700
50
(29.5) (40.2) (47.3) (52.8) (57.1) (60.5)
11,050 12,100 12,200 12,300 12,350 11,650
55
(18.5) (33.0) (41.8) (48.2) (53.2) (57.1)
10,400 10,550 10,650 10,700 10,750
60
(24.9) (36.3) (43.7) (49.4) (53.8)
*6400 9100 9200 9300 9350
65
(9.8) (29.1) (38.4) (44.9) (50)
*7900 8000 8050 8150
70
(19.4) (32.2) (40.1) (46)
6950 7050 7100
75
(24.7) (34.7) (41.6)
*5200 6150 6250
80
(13.2) (28.4) (36.8)
5400 5450
85
(20.3) (31.3)
4800
90
(24.8)
*4000
95
(15.5)
*2000
97
(8.7)
Minimum boom angle (° ) for indicate d le ngth (no load) 0
Maximum boom length (ft ) at 0° boom angle (no load) 102
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H
12,450 9250 6750 5000 3700 2700 1950 1300 700

(27) (33.8) (41.8) (49.8) (57.8) (65.8) (73.8) (81.8) (89.8)
NOTE: ( ) Reference radii in feet. 80025228D

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
22 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
RATED LIFTING CAPACITIES IN POUNDS WITH 3000 lb COUNTERWEIGHT
Load chart
31.2' - 102' BOOM WITH 26' FIXED or 26-45' TELE EXTENSION STOWED
NBT50/55: 102 ft main boom with extension stowed,
ON OUTRIGGERS over rear, -outriggers
FULLY EXTENDED OVER REAR fully extended,
3000 lb counterweight

Radius #0004 or #1004


in
Main boom length in feet
feet
31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
98,900
8
(68.3)
92,250 50,300 49,600
10
(64.2) (69.2) (73.1)
79,850 50,300 49,600 49,600
12
(59.9) (65.8) (70.4) (73.7)
63,300 50,300 49,600 49,600 49,450
15
(53) (60.7) (66.4) (70.3) (73.3)
46,200 46,750 47,200 47,550 45,900 40,550 33,950
20
(39.8) (51.3) (59.3) (64.5) (68.4) (71.3) (73.7)
30,400 36,150 36,650 37,000 37,250 35,500 29,750 26,400 23,450
25
(20) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
28,100 29,100 29,450 29,700 29,900 26,350 23,400 20,900 18,650
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71) (72.9)
23,700 24,100 24,300 24,550 23,300 20,850 18,600 16,700
35
(31.9) (44.2) (51.8) (57.3) (61.5) (64.9) (67.7) (69.9)
15,250 19,900 20,150 20,400 20,600 18,700 16,750 15,050
40
(15.1) (35.6) (45.4) (52.1) (57.1) (61.1) (64.3) (66.9)
16,150 16,400 16,650 16,800 16,650 15,200 13,650
45
(24.4) (38.2) (46.4) (52.4) (57.1) (60.8) (63.7)
13,600 13,800 14,000 14,100 13,850 12,400
50
(29.5) (40.2) (47.3) (52.8) (57.1) (60.5)
10,500 11,650 11,800 11,900 12,000 11,350
55
(18.5) (33.0) (41.8) (48.2) (53.2) (57.1)
9950 10,150 10,250 10,350 10,450
60
(24.9) (36.3) (43.7) (49.4) (53.8)
*5950 8700 8800 8950 9050
65
(9.8) (29.1) (38.4) (44.9) (50)
*7500 7600 7700 7850
70
(19.4) (32.2) (40.1) (46)
6550 6700 6800
75
(24.7) (34.7) (41.6)
*4800 5800 5950
80
(13.2) (28.4) (36.8)
5050 5150
85
(20.3) (31.3)
4500
90
(24.8)
*3700
95
(15.5)
*1700
97
(8.7)
Minimum boom angle (° ) for indicated length (no load) 0
Maximum boom le ngth (ft ) at 0° boom angle (no load) 102
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G
11,350 8350 6000 4400 3150 2250 1550 900

(27) (33.8) (41.8) (49.8) (57.8) (65.8) (73.8) (81.8)
NOTE: ( ) Reference radii in feet. 80026918 D

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 23
Load chart
26 FT. FIXED AND 26 FT. - 45 FT. TELE OFFSETTABLE BOOM EXTENSION
WITH 3000 lb COUNTERWEIGHT

ON OUTRIGGERS FULLY EXTENDED - 360°


NBT50/55-102: Extension information, 360°, outriggers fully extended, 3000 lb counterweight

Boom extension capacity notes:


**26 ft LENGTH 45 ft LENGTH 1. All capacities above the bold line are based on
Radius structural strength limitations.
in #0005 #0007 #0009 #0011
feet 2. 26 ft and 45 ft extension lengths may be used for single
0° 30° 0° 30°
OFFSET OFFSET OFFSET OFFSET line lifting service.
8500
40 3. Radii listed are for a fully extended boom with the
(71.6) boom extension erected. For main boom lengths less
8400 5950 5700 than fully extended, the rated loads are determined by
45
(69.5) (75.1) (72.6) boom angle. Use only the column which corresponds
8050 5900 5650 to the boom extension length and offset for which the
50 machine is configured. For boom angles not shown,
(67.2) (72.7) (70.7)
use the rating of the next lower boom angle.
7450 5750 5600
55
(64.7) (70.3) (68.9) Warning: Operation of this machine with heavier
7000 5550 5350 3400 loads than the capacities listed is strictly prohibited.
60
(62.3) (67.7) (66.9) (74.8) Machine tipping with boom extension occurs rapidly
6500 5350 5000 3250 and without advance warning.
65
(59.7) (65) (64.7) (72.6)
4. Boom angle is the angle above or below horizontal of
6000 5200 4700 3150 the longitudinal axis of the boom base section after
70
(57) (62.3) (62.6) (70) lifting rated load.
5650 5050 4400 3050
75 5. Capacities listed are with outriggers properly extended
(54.3) (59.4) (60.3) (68)
and vertical jacks set only.
5100 4800 4200 2950
80
(51.3) (56.4) (58.1) (65.5)
4350 4550 3950 2850
85
(48.1) (53.2) (55.7) (63)
3750 4150 3750 2800
90
(44.8) (49.7) (53.2) (60.4)
3150 3550 3550 2750
95
(41.3) (46) (50.7) (57.7)
2700 2950 3400 2700
100
(37.5) (41.8) (48) (54.9)
2250 2450 3050 2650
105
(33.3) (37.3) (45.1) (51.9)
1850 2000 2650 2600
110
(28.6) (32.1) (41.9) (48.6)
1500 2250 2550
115
(23) (38.6) (45.1)
1200 1950 2250
120
(15.5) (35) (41.1)
1650 1850
125
(31) (36.4)
1350 1500
130
(26.4) (30.9)
1100
135
(20.9)
850
140
(13.2)
Min. boom angle
for indicated length 10° 30° 10° 30°
(no load)
Max. boom length
at 0° boom angle 70 ft 70 ft
(no load)
NOTE: ( ) Boom angles are in degrees. 80025504B
#LMI operating code. Refer to LMI manual for instructions
**26 ft capacities are applicable to both 26' fixed and 26' tele
extension.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
24 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
ED AND 26 FT. - 45 FT. TELE OFFSETTABLE BOOM EXTENSION
Load chart
WITH 3000 lb COUNTERWEIGHT
NBT50/55-102: Extension information, over rear, outriggers fully extended, 3000 lb counterweight
ON OUTRIGGERS FULLY EXTENDED - OVER REAR

**26 ft LENGTH 45 ft LENGTH Boom extension capacity notes:


1. All capacities above the bold line are based on
Radius
#0006 #0008 #0010 #0012 structural strength limitations.
in
feet
0° 30° 0° 30° 2. 26 ft and 45 ft extension lengths may be used for single
OFFSET OFFSET OFFSET OFFSET line lifting service.
8500
40 3. Radii listed are for a fully extended boom with the
(71.6)
boom extension erected. For main boom lengths less
8400 5950 5700
45 than fully extended, the rated loads are determined by
(69.5) (75.1) (72.6)
boom angle. Use only the column which corresponds
8050 5900 5650 to the boom extension length and offset for which the
50
(67.2) (72.7) (70.7) machine is configured. For boom angles not shown,
7450 5750 5600 use the rating of the next lower boom angle.
55
(64.7) (70.3) (68.9)
Warning: Operation of this machine with heavier
7000 5550 5350 3400
60 loads than the capacities listed is strictly prohibited.
(62.3) (67.7) (66.9) (74.8)
Machine tipping with boom extension occurs rapidly
6500 5350 5000 3250 and without advance warning.
65
(59.7) (65) (64.7) (72.6)
6000 5200 4700 3150 4. Boom angle is the angle above or below horizontal of
70
(57) (62.3) (62.6) (70) the longitudinal axis of the boom base section after
5650 5050 4400 3050 lifting rated load.
75
(54.3) (59.4) (60.3) (68)
5. Capacities listed are with outriggers properly extended
5300 4800 4200 2950 and vertical jacks set only.
80
(51.4) (56.4) (58.1) (65.5)
5000 4550 3950 2850
85
(48.4) (53.2) (55.7) (63)
4450 4350 3750 2800
90
(45.1) (49.8) (53.2) (60.4)
3900 4150 3550 2750
95
(41.6) (46.2) (50.7) (57.7)
3450 3750 3400 2700
100
(37.8) (42.2) (48) (54.9)
3050 3250 3250 2650
105
(33.7) (37.6) (45.3) (51.9)
2650 2800 3100 2600
110
(29) (32.4) (42.3) (48.6)
2250 2900 2550
115
(23.4) (39.1) (45.1)
*1600 2550 2500
120
(15.7) (35.4) (41.2)
2300 2450
125
(31.5) (36.7)
2000 2150
130
(26.9) (31.1)
1750
135
(21.5)
900
140
(13.2)
Min. boom angle
for indicated length 10° 30° 10° 30°
(no load)
Max. boom length
at 0° boom angle 70 ft 70 ft
(no load)
NOTE: ( ) Boom angles are in degrees. 80025505B
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for instructions.
**26 ft capacities are applicable to both 26' fixed and 26' tele
extension.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 25
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 6000 lb COUNTERWEIGHT
31.2 FT. - 102 FT. BOOM
NBT55: 102 ft main boom, 360°,ON
outriggers fully FULLY
OUTRIGGERS extended, 6000 -lb
EXTENDED counterweight
360°

Radius #0001
in Main boom length in feet
feet 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
110,000
8
(68.3)
93,350 51,200 50,350
10
(64.2) (69.2) (73.1)
82,350 51,200 50,350 50,250
12
(59.9) (65.8) (70.4) (73.9)
66,350 51,200 50,350 50,250 50,000
15
(53.0) (60.7) (66.4) (70.5) (73.5)
48,750 49,150 49,450 49,650 46,450 41,000 34,350
20
(39.8) (51.3) (59.3) (64.6) (68.5) (71.3) (73.7)
31,500 38,350 38,650 38,850 39,000 35,950 30,150 26,800 23,800
25
(20.0) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
29,000 31,100 31,300 31,500 31,400 26,750 23,800 21,250 18,950
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71.0) (72.9)
25,550 25,750 25,950 26,050 23,700 21,250 18,950 17,000
35
(31.9) (44.2) (51.9) (57.3) (61.5) (64.9) (67.7) (69.9)
16,000 20,800 21,000 21,150 21,150 19,100 17,100 15,350
40
(15.1) (35.7) (45.6) (52.1) (57.1) (61.1) (64.3) (66.9)
16,800 17,000 17,200 17,300 17,050 15,550 13,950
45
(24.4) (38.4) (46.4) (52.4) (57.1) (60.8) (63.7)
14,100 14,250 14,350 14,450 14,200 12,700
50
(29.6) (40.2) (47.3) (52.8) (57.1) (60.5)
*11,150 11,950 12,100 12,200 12,250 11,650
55
(18.6) (33.0) (41.8) (48.2) (53.1) (57.1)
10,250 10,400 10,500 10,550 10,650
60
(24.9) (36.3) (43.7) (49.3) (53.8)
*6400 8900 9000 9100 9150
65
(9.8) (29.0) (38.3) (44.9) (50.0)
7650 7800 7850 7950
70
(19.4) (32.2) (40.1) (45.9)
6750 6850 6900
75
(24.7) (34.7) (41.6)
*5200 5950 6000
80
(13.2) (28.4) (36.7)
5150 5250
85
(20.3) (31.3)
4550
90
(24.7)
4000
95
(15.5)
*2200
97
(8.7)
Minimum boom angle (° ) for indicate d length (no load) 0
Maximum boom le ngth (ft ) at 0° boom angle (no load) 102
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H
12,450 9250 6750 5000 3700 2700 1950 1300 700

(27) (33.8) (41.8) (49.8) (57.8) (65.8) (73.8) (81.8) (89.8)
NOTE: ( ) Reference radii in feet. 80033203

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
26 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 6000 lb COUNTERWEIGHT
31.2' - 102' BOOM WITH 26' FIXED or 26-45' TELE EXTENSION STOWED
NBT55: 102 ft main boom with extension stowed, 360° outriggers fully extended,
6000 lb counterweight ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #0002
in Main boom length in feet
feet 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
108,900
8
(68.3)
92,250 50,300 49,600
10
(64.2) (69.2) (73.1)
81,250 50,300 49,600 49,650
12
(59.9) (65.8) (70.4) (73.9)
65,250 50,300 49,600 49,650 49,450
15
(53.0) (60.7) (66.4) (70.5) (73.5)
47,650 48,250 48,700 49,050 45,900 40,550 33,950
20
(39.8) (51.3) (59.3) (64.6) (68.5) (71.3) (73.7)
30,400 37,450 37,900 38,250 38,450 35,500 29,750 26,400 23,450
25
(20.0) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
28,100 30,350 30,700 30,950 30,950 26,350 23,400 20,900 18,650
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71.0) (72.9)
24,800 25,150 25,400 25,600 23,300 20,850 18,600 16,700
35
(31.9) (44.2) (51.9) (57.3) (61.5) (64.9) (67.7) (69.9)
15,250 20,200 20,450 20,700 20,750 18,700 16,750 15,050
40
(15.1) (35.7) (45.6) (52.1) (57.1) (61.1) (64.3) (66.9)
16,200 16,450 16,750 16,900 16,650 15,200 13,650
45
(24.4) (38.4) (46.4) (52.4) (57.1) (60.8) (63.7)
13,550 13,800 13,950 14,050 13,850 12,400
50
(29.6) (40.2) (47.3) (52.8) (57.1) (60.5)
*10,600 11,500 11,700 11,800 11,900 11,350
55
(18.6) (33.0) (41.8) (48.2) (53.1) (57.1)
9800 10,000 10,100 10,200 10,350
60
(24.9) (36.3) (43.7) (49.3) (53.8)
*5950 8500 8600 8750 8850
65
(9.8) (29.0) (38.3) (44.9) (50.0)
7250 7400 7500 7650
70
(19.4) (32.2) (40.1) (45.9)
6350 6500 6600
75
(24.7) (34.7) (41.6)
*4800 5600 5700
80
(13.2) (28.4) (36.7)
4800 4950
85
(20.3) (31.3)
4250
90
(24.7)
3700
95
(15.5)
*1900
97
(8.7)
Minimum boom angle (° ) for indicate d le ngth (no load) 0
Maximum boom le ngth (ft ) at 0° boom angle (no load) 102
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G
11,350 8350 6000 4400 3150 2250 1550 900

(27) (33.8) (41.8) (49.8) (57.8) (65.8) (73.8) (81.8)
NOTE: ( ) Reference radii in feet. 80033207

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 27
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 6000 lb COUNTERWEIGHT
31.2' - 102' BOOM WITH 26' FIXED ERECTED or 26-45' EXT ERECTED, RETRACTED
NBT55: 102 ft main boom with extension erected and retracted, 360°, outriggers fully extended,
6000 lb counterweight ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #0017
in Main boom length in feet
feet 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
107,450
8
(68.3)
90,800 48,800 48,050
10
(64.2) (69.2) (73.1)
79,800 48,800 48,050 48,000
12
(59.9) (65.8) (70.4) (73.9)
63,800 48,800 48,050 48,000 47,800
15
(53.0) (60.7) (66.4) (70.5) (73.5)
46,200 46,750 47,150 47,400 44,250 38,850 32,250
20
(39.8) (51.3) (59.3) (64.6) (68.5) (71.3) (73.7)
28,950 35,950 36,350 36,600 36,800 33,800 28,050 24,700 21,750
25
(20.0) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
26,600 28,800 29,050 29,300 29,250 24,650 21,700 19,200 16,900
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71.0) (72.9)
23,250 23,500 23,750 23,900 21,600 19,150 16,900 14,950
35
(31.9) (44.2) (51.9) (57.3) (61.5) (64.9) (67.7) (69.9)
13,700 18,550 18,800 19,000 19,050 17,000 15,050 13,300
40
(15.1) (35.7) (45.6) (52.1) (57.1) (61.1) (64.3) (66.9)
14,550 14,800 15,050 15,200 14,950 13,500 11,900
45
(24.4) (38.4) (46.4) (52.4) (57.1) (60.8) (63.7)
11,900 12,100 12,250 12,350 12,150 10,650
50
(29.6) (40.2) (47.3) (52.8) (57.1) (60.5)
*8950 9800 10,000 10,100 10,200 9600
55
(18.6) (33.0) (41.8) (48.2) (53.1) (57.1)
8100 8300 8400 8500 8600
60
(24.9) (36.3) (43.7) (49.3) (53.8)
*4250 6800 6900 7050 7100
65
(9.8) (29.0) (38.3) (44.9) (50.0)
5550 5700 5800 5900
70
(19.4) (32.2) (40.1) (45.9)
4650 4800 4850
75
(24.7) (34.7) (41.6)
*3100 3900 3950
80
(13.2) (28.4) (36.7)
3100 3200
85
(20.3) (31.3)
2500
90
(24.7)
1950
95
(15.5)
Minimum boom angle (°) for indicated length (no load) 0 2 5 7 10
Maximum boom length (ft ) at 0° boom angle (no load) 70
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D 70-E
9900 6850 4450 2750 1500 550

(27) (33.8) (41.8) (49.8) (57.8) (65.8)
NOTE: ( ) Reference radii in feet. 8003321 7

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
28 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 6000 lb COUNTERWEIGHT
31.2' - 102' BOOM WITH 26-45' EXT ERECTED, EXTENDED
NBT55: 102 ft main boom with extension erected and extended, 360°, outriggers fully extended,
6000 lb counterweight ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #0018
in Main boom length in feet
feet 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
107,050
8
(68.3)
90,400 48,450 47,800
10
(64.2) (69.2) (73.1)
79,400 48,450 47,800 47,800
12
(59.9) (65.8) (70.4) (73.9)
63,400 48,450 47,800 47,800 47,650
15
(53.0) (60.7) (66.4) (70.5) (73.5)
45,800 46,400 46,900 47,200 44,100 38,700 32,100
20
(39.8) (51.3) (59.3) (64.6) (68.5) (71.3) (73.7)
28,550 35,600 36,100 36,400 36,650 33,650 27,900 24,600 21,600
25
(20.0) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
26,250 28,550 28,850 29,150 29,100 24,500 21,600 19,050 16,800
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71.0) (72.9)
23,000 23,300 23,600 23,750 21,450 19,050 16,750 14,850
35
(31.9) (44.2) (51.9) (57.3) (61.5) (64.9) (67.7) (69.9)
13,450 18,350 18,650 18,850 18,900 16,900 14,900 13,200
40
(15.1) (35.7) (45.6) (52.1) (57.1) (61.1) (64.3) (66.9)
14,350 14,650 14,900 15,050 14,850 13,350 11,800
45
(24.4) (38.4) (46.4) (52.4) (57.1) (60.8) (63.7)
11,750 11,950 12,100 12,250 12,000 10,550
50
(29.6) (40.2) (47.3) (52.8) (57.1) (60.5)
*8800 9650 9850 10,000 10,050 9500
55
(18.6) (33.0) (41.8) (48.2) (53.1) (57.1)
7950 8150 8300 8350 8500
60
(24.9) (36.3) (43.7) (49.3) (53.8)
*400 6650 6800 6900 7000
65
(9.8) (29.0) (38.3) (44.9) (50.0)
5400 5600 5650 5800
70
(19.4) (32.2) (40.1) (45.9)
4550 4650 4750
75
(24.7) (34.7) (41.6)
*3000 3750 3850
80
(13.2) (28.4) (36.7)
2950 3100
85
(20.3) (31.3)
2400
90
(24.7)
1850
95
(15.5)
Minimum boom angle (°) for indicated length (no load) 0 3 5 8 10
Maximum boom length (ft) at 0° boom angle (no load) 70
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D
9500 6500 4200 2550 1350

(27) (33.8) (41.8) (49.8) (57.8)
NOTE: ( ) Reference radii in feet. 80033218

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 29
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 6000 lb COUNTERWEIGHT
31.2 FT. - 102 FT. BOOM
NBT55: 102 ft main boom, over rear, outriggers fully extended, 6000 lb counterweight
ON OUTRIGGERS FULLY EXTENDED - OVER REAR

Radius #0003
in Main boom length in feet
feet 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
110,000
8
(68.3)
93,350 51,200 50,350
10
(64.2) (69.2) (73.1)
82,350 51,200 50,350 50,250
12
(59.9) (65.8) (70.4) (73.9)
66,350 51,200 50,350 50,250 50,000
15
(53.0) (60.7) (66.4) (70.5) (73.5)
48,750 49,150 49,450 49,650 46,450 41,000 34,350
20
(39.8) (51.3) (59.3) (64.6) (68.4) (71.3) (73.7)
31,500 38,350 38,650 38,850 39,000 35,950 30,150 26,800 23,800
25
(20.0) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
29,000 31,100 31,300 31,500 31,400 26,750 23,800 21,250 18,950
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71.0) (72.9)
25,550 25,750 25,950 26,050 23,700 21,250 18,950 17,000
35
(31.9) (44.2) (51.9) (57.3) (61.5) (64.9) (67.7) (69.9)
16,000 21,650 21,850 21,950 21,150 19,100 17,100 15,350
40
(15.1) (35.6) (45.5) (52.1) (57.1) (61.1) (64.3) (66.9)
17,300 18,550 18,650 18,800 17,050 15,550 13,950
45
(24.4) (38.3) (46.4) (52.5) (57.1) (60.8) (63.7)
15,500 15,650 15,750 15,300 14,200 12,700
50
(29.6) (40.2) (47.4) (52.9) (57.1) (60.5)
*11,150 13,300 13,400 13,500 13,000 11,650
55
(18.6) (33.0) (41.9) (48.3) (53.2) (57.1)
11,450 11,550 11,650 11,700 10,750
60
(24.9) (35.7) (43.4) (49.1) (53.8)
*6400 10,100 10,200 10,300 9800
65
(9.8) (29.1) (38.5) (45.1) (50.1)
*8350 8900 9000 9050
70
(19.5) (32.3) (40.3) (46.1)
7800 7900 7950
75
(24.8) (34.9) (41.8)
*5200 6950 7000
80
(13.2) (28.6) (37.0)
*6100 6200
85
(20.4) (31.5)
5500
90
(24.9)
*4050
95
(15.5)
*2200
97
(8.7)
Minimum boom angle (° ) for indicate d le ngth (no load) 0
Maximum boom length (ft ) at 0° boom angle (no load) 102
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H
12,450 9250 6750 5000 3700 2700 1950 1300 700

(27) (33.8) (41.8) (49.8) (57.8) (65.8) (73.8) (81.8) (89.8)
NOTE: ( ) Reference radii in feet. 80033204

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
30 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 6000 lb COUNTERWEIGHT
31.2' - 102' BOOM WITH 26' FIXED or 26-45' TELE EXTENSION STOWED
NBT55: 102 ft main boom with extension stowed, over rear, outriggers fully
ON OUTRIGGERS FULLY EXTENDED - OVER REAR
extended, 6000 lb counterweight

Radius #0004
in Main boom length in feet
feet 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G 94-H 102
108,900
8
(68.3)
92,250 50,300 49,600
10
(64.2) (69.2) (73.1)
81,250 50,300 49,600 49,600
12
(59.9) (65.8) (70.4) (73.9)
65,250 50,300 49,600 49,600 49,450
15
(53.0) (60.7) (66.4) (70.5) (73.5)
47,650 48,250 48,700 49,050 45,900 40,550 33,950
20
(39.8) (51.3) (59.3) (64.6) (68.4) (71.3) (73.7)
30,400 37,450 37,900 38,250 38,450 35,500 29,750 26,400 23,450
25
(20.0) (40.3) (51.4) (58.3) (63.2) (66.9) (69.7) (72.2) (74.2)
28,100 30,350 30,700 30,950 30,950 26,350 23,400 20,900 18,650
30
(25.7) (42.6) (51.6) (57.7) (62.2) (65.7) (68.6) (71.0) (72.9)
24,800 25,150 25,400 25,600 23,300 20,850 18,600 16,700
35
(31.9) (44.2) (51.9) (57.3) (61.5) (64.9) (67.7) (69.9)
15,250 21,050 21,300 21,500 20,750 18,700 16,750 15,050
40
(15.1) (35.6) (45.5) (52.1) (57.1) (61.1) (64.3) (66.9)
16,700 18,000 18,200 18,400 16,650 15,200 13,650
45
(24.4) (38.3) (46.4) (52.5) (57.1) (60.8) (63.7)
14,950 15,200 15,350 14,900 13,850 12,400
50
(29.6) (40.2) (47.4) (52.9) (57.1) (60.5)
*10,600 12,850 13,000 13,100 12,650 11,350
55
(18.6) (33.0) (41.9) (48.3) (53.2) (57.1)
11,000 11,150 11,250 11,350 10,450
60
(24.9) (35.7) (43.4) (49.1) (53.8)
*5950 9700 9800 9950 9500
65
(9.8) (29.1) (38.5) (45.1) (50.1)
*7950 8500 8650 8750
70
(19.5) (32.3) (40.3) (46.1)
7400 7550 7650
75
(24.8) (34.9) (41.8)
*4800 6600 6700
80
(13.2) (28.6) (37.0)
*5750 5900
85
(20.4) (31.5)
5200
90
(24.9)
*3750
95
(15.5)
*1900
97
(8.7)
Minimum boom angle (° ) for indicate d length (no load) 0
Maximum boom length (ft ) at 0° boom angle (no load) 102
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.2 38-A 46-B 54-C 62-D 70-E 78-F 86-G
11,350 8350 6000 4400 3150 2250 1550 900

(27) (33.8) (41.8) (49.8) (57.8) (65.8) (73.8) (81.8)
NOTE: ( ) Reference radii in feet. 80033208

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 31
Load chart
T. FIXED AND 26 FT. - 45 FT. TELE OFFSETTABLE BOOM EXTENSION
WITH 6000 lb COUNTERWEIGHT
NBT55-102: Extension information, 360°, outriggers fully extended, 6000 lb counterweight
ON OUTRIGGERS FULLY EXTENDED - 360°

**26 ft LENGTH 45 ft LENGTH Boom extension capacity notes:


Radius 1. All capacities above the bold line are based on
in #0005 #0007 #0009 #0011 structural strength limitations.
feet 0° 30° 0° 30°
OFFSET OFFSET OFFSET OFFSET 2. 26 ft and 45 ft extension lengths may be used for single
8500 line lifting service.
40
(71.6)
3. Radii listed are for a fully extended boom with the
8400 5950 5700 boom extension erected. For main boom lengths less
45
(69.5) (75.1) (72.6) than fully extended, the rated loads are determined by
8050 5900 5650 boom angle. Use only the column which corresponds
50 to the boom extension length and offset for which the
(67.2) (72.7) (70.7)
machine is configured. For boom angles not shown,
7450 5750 5600 use the rating of the next lower boom angle.
55
(64.7) (70.3) (68.9)
7000 5550 5350 3400 Warning: Operation of this machine with heavier
60 loads than the capacities listed is strictly prohibited.
(62.3) (67.7) (66.9) (74.8)
Machine tipping with boom extension occurs rapidly
6500 5350 5000 3250 and without advance warning.
65
(59.7) (65.0) (64.7) (72.6)
6000 5200 4700 3150 4. Boom angle is the angle above or below horizontal of
70 the longitudinal axis of the boom base section after
(57.0) (62.3) (62.6) (70.3)
lifting rated load.
5650 5050 4400 3050
75
(54.3) (59.4) (60.3) (68.0)
5. Capacities listed are with outriggers properly extended
5300 4800 4200 2950 and vertical jacks set only.
80
(51.4) (56.4) (58.1) (65.5)
5000 4550 3950 2850
85
(48.4) (53.2) (55.7) (63.0)
4450 4350 3750 2800
90
(45.1) (49.8) (53.2) (60.4)
3900 4150 3550 2750
95
(41.6) (46.2) (50.7) (57.7)
3350 3650 3400 2700
100
(37.8) (42.1) (48.0) (54.9)
2900 3100 3250 2650
105
(33.6) (37.5) (45.3) (51.9)
2450 2600 3100 2600
110
(28.9) (32.3) (42.3) (48.6)
2050 2850 2550
115
(23.3) (39.0) (45.1)
*1600 2500 2500
120
(15.7) (35.4) (41.2)
2150 2400
125
(31.4) (36.7)
1850 2000
130
(26.8) (31.1)
1600
135
(21.3)
*900
140
(13.2)
Min. boom angle
for indicated length 10° 30° 10° 30°
(no load)
Max. boom length
at 0° boom angle 70 ft 70 ft
(no load)
NOTE: ( ) Boom angles are in degrees. 8003407 1
#LMI operating code. Refer to LMI manual for instructions.
*Loads are structurally limited.
**26 ft capacities are applicable to both 26' fixed and 26' tele
extension.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
32 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
XED AND 26 FT. - 45 FT. TELE OFFSETTABLE BOOM EXTENSION Load chart
WITH 6000 lb COUNTERWEIGHT

ON OUTRIGGERS FULLY EXTENDED


NBT55-102: Extension - OVER
information, REAR
over rear, outriggers fully extended, 6000 lb counterweight

Boom extension capacity notes:


**26 ft LENGTH 45 ft LENGTH
Radius 1. All capacities above the bold line are based on
in #0006 #0008 #0010 #0012 structural strength limitations.
feet 0° 30° 0° 30°
OFFSET OFFSET OFFSET OFFSET 2. 26 ft and 45 ft extension lengths may be used for single
line lifting service.
8500
40
(71.6) 3. Radii listed are for a fully extended boom with the
8400 5950 5700 boom extension erected. For main boom lengths less
45
(69.5) (75.1) (72.6) than fully extended, the rated loads are determined by
boom angle. Use only the column which corresponds
8050 5900 5650
50 to the boom extension length and offset for which the
(67.2) (72.7) (70.7)
machine is configured. For boom angles not shown,
7450 5750 5600 use the rating of the next lower boom angle.
55
(64.7) (70.3) (68.9)
7000 5550 5350 3400 Warning: Operation of this machine with heavier
60 loads than the capacities listed is strictly prohibited.
(62.3) (67.7) (66.9) (74.8)
Machine tipping with boom extension occurs rapidly
6500 5350 5000 3250 and without advance warning.
65
(59.7) (65.0) (64.7) (72.6)
6000 5200 4700 3150 4. Boom angle is the angle above or below horizontal of
70 the longitudinal axis of the boom base section after
(57.0) (62.3) (62.6) (70.3)
lifting rated load.
5650 5050 4400 3050
75
(54.3) (59.4) (60.3) (68.0) 5. Capacities listed are with outriggers properly extended
5300 4800 4200 2950 and vertical jacks set only.
80
(51.4) (56.4) (58.1) (65.5)
5000 4550 3950 2850
85
(48.4) (53.2) (55.7) (63.0)
4450 4350 3750 2800
90
(45.1) (49.8) (53.2) (60.4)
3900 4150 3550 2750
95
(41.6) (46.2) (50.7) (57.7)
3450 3750 3400 2700
100
(37.8) (42.2) (48.0) (54.9)
3050 3250 3250 2650
105
(33.7) (37.6) (45.3) (51.9)
2650 2850 3100 2600
110
(29.0) (32.4) (42.3) (48.6)
2300 2900 2550
115
(23.4) (39.1) (45.1)
1600 2550 2500
120
(15.7) (35.4) (41.2)
2300 2450
125
(31.5) (36.7)
2000 2300
130
(26.9) (31.2)
1750
135
(21.5)
900
140
(13.2)
Min. boom angle
for indicated length 10° 30° 10° 30°
(no load)
Max. boom length
at 0° boom angle 70 ft 70 ft
(no load)
NOTE: ( ) Boom angles are in degrees. 80034072
#LMI operating code. Refer to LMI manual for instructions.
**26 ft capacities are applicable to both 26' fixed and 26' tele
extension.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 33
Working range
Working range: NBT50/55-128 128 ft main boom, with extensions

(Boom deflection not shown)


190
180 0° Offset 45' Ext.

170
30° Offset
26' Ext.
160
150

140
128

Boom length and extension in feet


130
118
Height from ground in feet

120
70° 107
110
60° 97
100
50° 86
90
75
80 40°
64
70
30° 54
60
43
50 20°
32
40
75.5°
30 10°
Max boom
20 angle

10 0°

0 140
160 120 100 80 60 40 20
170 150 130 110 90 70 50 30 10 Axis of rotation
Operating radius in feet from axis of rotation

Dimensions are for largest


(6' 9") furnished hook block and
(8' 7")
headache ball with
anti-two block activated.

*This drawing shows the physical reach of the machine. Always refer to the load
chart to see which portions of this diagram are valid for the specific machine
configuration and where the loads are structurally or stability limited.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
34 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH NO COUNTERWEIGHT
NBT50/55: 128 ft main boom, 360°, outriggers
31.7 FT.fully
- 128extended,
FT. BOOM no counterweight
ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #8001
in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
100,000
8
(68.1)

92,100 40,050
10
(64.0) (71.3)
76,600 40,050 40,350
12
(59.8) (68.5) (73.3)
60,600 40,050 40,350 40,300
15
(53.1) (64.0) (69.9) (73.5)
44,100 40,050 40,350 40,300 34,100
20
(40.2) (56.2) (64.2) (68.8) (72.5)
31,650 34,250 34,750 35,050 30,100 22,650
25
(21.8) (47.5) (57.9) (63.9) (68.4) (71.5)
26,750 27,450 27,800 27,100 20,400 17,800
30
(37.3) (51.2) (58.6) (64.2) (68.0) (71.2)
19,550 20,200 20,550 20,900 18,500 16,300 14,700 12,900
35
(23.6) (43.8) (52.9) (59.6) (64.3) (68.0) (70.8) (73.2)
15,450 15,800 16,100 16,350 15,100 13,650 12,050 10,850
40
(35.1) (46.9) (54.9) (60.5) (64.8) (68.0) (70.8) (73.0)
12,150 12,500 12,800 13,000 13,200 12,550 11,300 10,250
45
(23.9) (40.1) (49.8) (56.3) (61.4) (65.0) (68.2) (70.8)
10,200 10,450 10,650 10,850 11,050 10,650 9650
50
(33.1) (45.0) (52.5) (58.1) (61.9) (65.8) (68.4)
8300 8550 8750 8950 9100 9250 8750
55
(23.3) (39.0) (47.9) (54.3) (58.9) (63.0) (65.9)
7050 7250 7400 7550 7700 7800
60
(32.2) (43.1) (50.4) (55.4) (59.9) (63.3)
5800 6000 6150 6300 6400 6550
65
(23.7) (37.7) (46.2) (51.9) (56.8) (60.5)
*4650 5000 5150 5250 5350 5450
70
(9.2) (31.6) (41.7) (48.1) (53.6) (57.6)
4100 4250 4400 4500 4600
75
(24.0) (36.8) (44.2) (50.3) (54.6)
3400 3550 3650 3750 3800
80
(12.7) (31.2) (39.9) (46.8) (51.6)
2900 3000 3100 3150
85
(24.5) (35.3) (43.1) (48.4)
2350 2450 2550 2600
90
(15.0) (30.0) (39.1) (45.0)
1950 2050 2100
95
(23.6) (34.8) (41.5)
1500 1600 1650
100
(14.6) (29.9) (37.7)
1200 1250
105
(24.0) (33.5)
850 900
110
(16.2) (28.7)
600
115
(23.1)
Minimum boom angle (°) for indicated length (no load) 0 5 8 17
Maximum boom length (ft.) at 0° boom angle (no load) 97
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C 75-D 86-E
12,900 7600 4850 3700 2200 1150

(27.5) (38.8) (19.8) (59.8) (70.8) (81.8)
NOTE: ( ) Reference radii in feet. 80034955

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 35
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH NO COUNTERWEIGHT
31.7' - 128'boom
NBT50/55: 128 ft main BOOM WITH
with 26' FIXED
extension or 26-45'
stowed, TELE
360°, EXTENSION
outriggers fullySTOWED
extended,
no counterweight ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #8002
in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
98,850
8
(68.1)
90,950 39,250
10
(64.0) (71.3)
75,450 39,250 39,250
12
(59.8) (68.5) (73.3)
59,450 39,250 39,250 39,250
15
(53.1) (64.0) (69.9) (73.5)
42,950 39,250 39,250 39,250 33,650
20
(40.2) (56.2) (64.2) (68.8) (72.5)
30,500 33,450 34,150 34,550 29,650 22,250
25
(21.8) (47.5) (57.9) (63.9) (68.4) (71.5)
25,950 26,850 27,300 26,650 20,000 17,450
30
(37.3) (51.2) (58.6) (64.2) (68.0) (71.2)
18,750 19,600 20,050 20,450 18,100 15,950 14,400 12,600
35
(23.6) (43.8) (52.9) (59.6) (64.3) (68.0) (70.8) (73.2)
14,850 15,300 15,650 15,950 14,750 13,350 11,750 10,600
40
(35.1) (46.9) (54.9) (60.5) (64.8) (68.0) (70.8) (73.0)
11,550 12,000 12,350 12,600 12,850 12,250 11,000 10,000
45
(23.9) (40.1) (49.8) (56.3) (61.4) (65.0) (68.2) (70.8)
9700 10,000 10,250 10,500 10,750 10,350 9400
50
(33.1) (45.0) (52.5) (58.1) (61.9) (65.8) (68.4)
7800 8100 8350 8600 8800 8950 8500
55
(23.3) (39.0) (47.9) (54.3) (58.9) (63.0) (65.9)
6600 6850 7050 7250 7400 7550
60
(32.2) (43.1) (50.4) (55.4) (59.9) (63.3)
5350 5600 5800 6000 6100 6300
65
(23.7) (37.7) (46.2) (51.9) (56.8) (60.5)
*4200 4600 4800 4950 5050 5200
70
(9.2) (31.6) (41.7) (48.1) (53.6) (57.6)
3700 3900 4100 4200 4350
75
(24.0) (36.8) (44.2) (50.3) (54.6)
3000 3200 3350 3450 3550
80
(12.7) (31.2) (39.9) (46.8) (51.6)
2550 2700 2800 2900
85
(24.5) (35.3) (43.1) (48.4)
2000 2150 2250 2350
90
(15.0) (30.0) (39.1) (45.0)
1650 1750 1850
95
(23.6) (34.8) (41.5)
1200 1300 1400
100
(14.6) (29.9) (37.7)
900 1000
105
(24.0) (33.5)
550 650
110
(16.2) (28.7)
Minimum boom angle (°) for indicated length (no load) 0 5 8 17
Maximum boom le ngth (ft ) at 0° boom angle (no load) 97
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C 75-D 86-E
11,750 6,800 4,250 3,200 1,750 750

(27.5) (38.8) (19.8) (59.8) (70.8) (81.8)
NOTE: ( ) Reference radii in feet. 80034956

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
36 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH NO COUNTERWEIGHT
31.7' - 128' BOOM WITH 26' FIXED ERECTED or 26-45' EXT ERECTED, RETRACTED
NBT50/55: 128 ft main boom with extension erected and retracted, 360°, outriggers fully extended,
no counterweight ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #8017
in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
97,450
8
(68.1)
89,550 37,700
10
(64.0) (71.3)
74,050 37,700 37,700
12
(59.8) (68.5) (73.3)
58,050 37,700 37,700 37,700
15
(53.1) (64.0) (69.9) (73.5)
41,550 37,700 37,700 37,700 32,000
20
(40.2) (56.2) (64.2) (68.8) (72.5)
29,100 31,900 32,500 32,900 28,000 20,550
25
(21.8) (47.5) (57.9) (63.9) (68.4) (71.5)
24,400 25,200 25,650 25,000 18,300 15,750
30
(37.3) (51.2) (58.6) (64.2) (68.0) (71.2)
17,200 17,950 18,400 18,800 16,400 14,250 12,650 10,900
35
(23.6) (43.8) (52.9) (59.6) (64.3) (68.0) (70.8) (73.2)
13,200 13,650 14,000 14,250 13,050 11,600 10,050 8850
40
(35.1) (46.9) (54.9) (60.5) (64.8) (68.0) (70.8) (73.0)
9900 10,350 10,700 10,900 11,150 10,500 9300 8250
45
(23.9) (40.1) (49.8) (56.3) (61.4) (65.0) (68.2) (70.8)
8050 8350 8550 8800 9000 8650 7650
50
(33.1) (45.0) (52.5) (58.1) (61.9) (65.8) (68.4)
6150 6450 6650 6900 7050 7250 6750
55
(23.3) (39.0) (47.9) (54.3) (58.9) (63.0) (65.9)
4950 5150 5350 5500 5700 5800
60
(32.2) (43.1) (50.4) (55.4) (59.9) (63.3)
3700 3900 4100 4250 4400 4550
65
(23.7) (37.7) (46.2) (51.9) (56.8) (60.5)
*2550 2900 3100 3200 3350 3450
70
(9.2) (31.6) (41.7) (48.1) (53.6) (57.6)
2000 2200 2350 2500 2600
75
(24.0) (36.8) (44.2) (50.3) (54.6)
1300 1500 1600 1750 1800
80
(12.7) (31.2) (39.9) (46.8) (51.6)
850 950 1100 1150
85
(24.5) (35.3) (43.1) (48.4)
550 600
90
(39.1) (45.0)
Minimum boom angle (°) for indicated
0 2 5 19 30 38 43
length (no load)
Maximum boom length (ft) at 0° boom
64
angle (no load)
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C
10,350 5250 2600 1550

(27.5) (38.8) (19.8) (59.8)
NOTE: ( ) Reference radii in feet. 80034957

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 37
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH NO COUNTERWEIGHT
31.7'
NBT50/55: 128 ft main boom- 128'with
BOOM WITH 26-45'
extension EXT
erected ERECTED,
and EXTENDED
extended, 360°, outriggers fully extended,
no counterweight
ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #8018
in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
97,050
8
(68.1)
89,150 37,400
10
(64.0) (71.3)
73,650 37,400 37,400
12
(59.8) (68.5) (73.3)
57,650 37,400 37,400 37,400
15
(53.1) (64.0) (69.9) (73.5)
41,150 37,400 37,400 37,400 31,850
20
(40.2) (56.2) (64.2) (68.8) (72.5)
28,700 31,600 32,300 32,700 27,850 20,450
25
(21.8) (47.5) (57.9) (63.9) (68.4) (71.5)
24,100 25,000 25,450 24,850 18,200 15,650
30
(37.3) (51.2) (58.6) (64.2) (68.0) (71.2)
16,900 17,750 18,200 18,650 16,300 14,150 12,550 10,800
35
(23.6) (43.8) (52.9) (59.6) (64.3) (68.0) (70.8) (73.2)
13,000 13,450 13,850 14,150 12,950 11,500 9950 8750
40
(35.1) (46.9) (54.9) (60.5) (64.8) (68.0) (70.8) (73.0)
9700 10,150 10,550 10,800 11,050 10,400 9200 8150
45
(23.9) (40.1) (49.8) (56.3) (61.4) (65.0) (68.2) (70.8)
7850 8200 8450 8700 8900 8550 7550
50
(33.1) (45.0) (52.5) (58.1) (61.9) (65.8) (68.4)
5950 6300 6550 6800 6950 7150 6650
55
(23.3) (39.0) (47.9) (54.3) (58.9) (63.0) (65.9)
4800 5050 5250 5400 5600 5700
60
(32.2) (43.1) (50.4) (55.4) (59.9) (63.3)
3550 3800 4000 4150 4300 4450
65
(23.7) (37.7) (46.2) (51.9) (56.8) (60.5)
*2400 2800 3000 3100 3250 3350
70
(9.2) (31.6) (41.7) (48.1) (53.6) (57.6)
1900 2100 2250 2400 2500
75
(24.0) (36.8) (44.2) (50.3) (54.6)
1200 1400 1500 1650 1700
80
(12.7) (31.2) (39.9) (46.8) (51.6)
750 850 1000 1050
85
(24.5) (35.3) (43.1) (48.4)
450 500
90
(39.1) (45.0)
Minimum boom angle (°) for indicated
0 3 6 20 31 39 44
length (no load)
Maximum boom length (ft) at 0° boom
64
angle (no load)
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C
9950 4950 2400 1350

(27.5) (38.8) (19.8) (59.8)
NOTE: ( ) Reference radii in feet. 80034958

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
38 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH NO COUNTERWEIGHT
31.7 FT. - 128 FT. BOOM
NBT50/55: 128 ft main boom, over rear, outriggers fully extended, no counterweight
ON OUTRIGGERS FULLY EXTENDED - OVER REAR

Radius #8003
in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
100,000
8
(68.1)
92,100 40,050
10
(64.0) (71.3)
76,600 40,050 40,350
12
(59.8) (68.5) (73.3)
60,600 40,050 40,350 40,300
15
(53.1) (64.0) (69.9) (73.5)
44,100 40,050 40,350 40,300 34,100
20
(40.2) (56.2) (64.2) (68.8) (72.5)
31,650 34,250 34,750 35,050 30,100 22,650
25
(21.8) (47.5) (57.9) (63.9) (68.4) (71.5)
27,050 27,500 27,800 27,100 20,400 17,800
30
(37.3) (51.2) (58.6) (64.2) (68.0) (71.2)
21,750 22,350 22,650 22,900 18,500 16,300 14,700 12,900
35
(23.6) (43.8) (53.0) (59.7) (64.3) (68.0) (70.8) (73.2)
17,550 17,900 18,150 17,050 15,100 13,650 12,050 10,850
40
(35.2) (46.9) (54.9) (60.5) (64.8) (68.0) (70.8) (73.0)
14,100 14,450 14,700 14,900 14,000 12,550 11,300 10,250
45
(24.0) (40.2) (49.9) (56.5) (61.5) (65.0) (68.2) (70.8)
11,850 12,100 12,300 12,450 11,750 10,650 9650
50
(32.3) (44.5) (52.2) (57.9) (62.0) (65.8) (68.4)
9950 10,200 10,400 10,550 10,700 10,000 8750
55
(23.3) (39.1) (48.1) (54.5) (59.1) (63.2) (65.9)
8550 8750 8900 9050 9200 7850
60
(32.3) (43.2) (50.6) (55.7) (60.3) (63.3)
7250 7400 7550 7700 7850 7000
65
(23.8) (37.8) (46.4) (52.2) (57.2) (60.6)
*4650 6300 6450 6550 6700 6300
70
(9.2) (31.7) (41.9) (48.4) (54.0) (57.9)
5350 5500 5600 5750 5700
75
(24.2) (37.0) (44.5) (50.7) (55.0)
*4400 4700 4800 4900 5000
80
(12.8) (31.4) (40.2) (47.2) (52.0)
4000 4100 4200 4300
85
(24.7) (35.5) (43.5) (48.8)
3350 3450 3550 3650
90
(15.2) (30.2) (39.5) (45.5)
2900 3000 3100
95
(23.8) (35.1) (41.9)
2450 2550 2600
100
(14.8) (30.2) (38.1)
2100 2150
105
(24.4) (33.9)
1700 1750
110
(16.5) (29.1)
1400
115
(23.5)
*1100
120
(15.8)
Minimum boom angle (°) for indicated length (no load) 0 5 8 10
Maximum boom length (ft ) at 0° boom angle (no load) 97
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C 75-D 86-E
12,900 7600 4850 3700 2200 1150

(27.5) (38.8) (19.8) (59.8) (70.8) (81.8)
NOTE: ( ) Reference radii in feet. 80034959

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 39
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH NO COUNTERWEIGHT
31.7' - 128' BOOM WITH 26' FIXED or 26-45' TELE EXTENSION STOWED
NBT50/55: 128 ft main boom with extension stowed, over rear, outriggers fully extended,
no counterweight ON OUTRIGGERS FULLY EXTENDED - OVER REAR

Radius #8004
in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
98,850
8
(68.1)
90,950 39,250
10
(64.0) (71.3)
75,450 39,250 39,250
12
(59.8) (68.5) (73.3)
59,450 39,250 39,250 39,250
15
(53.1) (64.0) (69.9) (73.5)
42,950 39,250 39,250 39,250 33,650
20
(40.2) (56.2) (64.2) (68.8) (72.5)
30,500 33,450 34,150 34,550 29,650 22,250
25
(21.8) (47.5) (57.9) (63.9) (68.4) (71.5)
26,250 26,900 27,300 26,650 20,000 17,450
30
(37.3) (51.2) (58.6) (64.2) (68.0) (71.2)
20,950 21,750 22,150 22,450 18,100 15,950 14,400 12,600
35
(23.6) (43.8) (53.0) (59.7) (64.3) (68.0) (70.8) (73.2)
16,950 17,400 17,700 16,650 14,750 13,350 11,750 10,600
40
(35.2) (46.9) (54.9) (60.5) (64.8) (68.0) (70.8) (73.0)
13,500 13,950 14,250 14,500 13,650 12,250 11,000 10,000
45
(24.0) (40.2) (49.9) (56.5) (61.5) (65.0) (68.2) (70.8)
11,350 11,650 11,900 12,100 11,450 10,350 9400
50
(32.3) (44.5) (52.2) (57.9) (62.0) (65.8) (68.4)
9450 9750 10,000 10,200 10,400 9700 8500
55
(23.3) (39.1) (48.1) (54.5) (59.1) (63.2) (65.9)
8100 8350 8550 8750 8900 7600
60
(32.3) (43.2) (50.6) (55.7) (60.3) (63.3)
6800 7000 7200 7400 7550 6750
65
(23.8) (37.8) (46.4) (52.2) (57.2) (60.6)
*4200 5900 6100 6250 6400 6050
70
(9.2) (31.7) (41.9) (48.4) (54.0) (57.9)
4950 5150 5300 5450 5450
75
(24.2) (37.0) (44.5) (50.7) (55.0)
*4000 4350 4500 4600 4750
80
(12.8) (31.4) (40.2) (47.2) (52.0)
3650 3800 3900 4050
85
(24.7) (35.5) (43.5) (48.8)
3000 3150 3250 3400
90
(15.2) (30.2) (39.5) (45.5)
2600 2700 2850
95
(23.8) (35.1) (41.9)
2150 2250 2350
100
(14.8) (30.2) (38.1)
1800 1900
105
(24.4) (33.9)
1400 1500
110
(16.5) (29.1)
1150
115
(23.5)
*850
120
(15.8)
Minimum boom angle (°) for indicated length (no load) 0 5 8 10
Maximum boom length (ft.) at 0° boom angle (no load) 97
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C 75-D 86-E
11,750 6800 4250 3200 1750 750

(27.5) (38.8) (19.8) (59.8) (70.8) (81.8)
NOTE: ( ) Reference radii in feet. 80034960

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
40 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
26 FT. FIXED AND 26 FT. - 45 FT. TELE OFFSETTABLE BOOM EXTENSION Load chart
WITH NO COUNTERWEIGHT

ON OUTRIGGERS
NBT50/55-128: ExtensionFULLY EXTENDED
information, 360°,- outriggers
360° fully extended, no counterweight

Boom extension capacity notes:


**26 ft LENGTH 45 ft LENGTH 1. All capacities above the bold line are based on
Radius
structural strength limitations.
in #8005 #8007 #8009 #8011
feet 0° 30° 0° 30° 2. 26 ft and 45 ft extension lengths may be used for single
OFFSET OFFSET OFFSET OFFSET line lifting service.
6000 3. Radii listed are for a fully extended boom with the
50
(72.6) boom extension erected. For main boom lengths less
5800 than fully extended, the rated loads are determined by
55 boom angle. Use only the column which corresponds
(70.8) to the boom extension length and offset for which the
5500 machine is configured. For boom angles not shown,
60 use the rating of the next lower boom angle.
(69.0)
5200 4900 4050 Warning: Operation of this machine with heavier
65 loads than the capacities listed is strictly prohibited.
(67.0) (72.1) (70.4)
Machine tipping with boom extension occurs rapidly
4850 4650 4000 and without advance warning.
70
(65.0) (69.9) (68.8)
4. Boom angle is the angle above or below horizontal of
4500 4400 3950 2800 the longitudinal axis of the boom base section after
75
(62.9) (67.7) (67.2) (73.8) lifting rated load.
3700 4150 3900 2700 5. Capacities listed are with outriggers properly extended
80
(60.5) (65.4) (65.6) (71.9) and vertical jacks set only.
3000 3750 3800 2650
85
(58.0) (63.0) (63.9) (70.0)
2400 3050 3350 2600
90
(55.4) (60.2) (61.8) (68.0)
1900 2400 2750 2550
95
(52.8) (57.3) (59.4) (66.0)
1450 1950 2250 2500
100
(50.2) (54.5) (57.1) (63.9)
1000 1450 1800 2450
105
(47.4) (51.5) (54.7) (61.8)
650 1000 1450 2200
110
(44.5) (48.4) (52.3) (59.3)
650 1100 1750
115
(45.2) (49.8) (56.5)
750 1350
120
(47.2) (53.7)
450 1000
125
(44.5) (50.7)
650
130
(47.7)
Min. boom angle
for indicated length 43° 43° 44° 45°
(no load)
Max. boom length
at 0° boom angle 64 ft 64 ft
(no load)
NOTE: ( ) Boom angles are in degrees. 80034967
#LMI operating code. Refer to LMI manual for instructions.
**26 ft ca pacities are applicable to both 26' fixed and 26' tele
extension.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 41
Load chart
T. FIXED AND 26 FT. - 45 FT. TELE OFFSETTABLE BOOM EXTENSION
WITH NO COUNTERWEIGHT
NBT50/55-128: Extension information, over rear, outriggers fully extended, no counterweight
ON OUTRIGGERS FULLY EXTENDED - OVER REAR

Boom extension capacity notes:


**26 ft LENGTH 45 ft LENGTH 1. All capacities above the bold line are based on
Radius
in #8006 #8008 #8010 #8012 structural strength limitations.
feet 0° 30° 0° 30°
2. 26 ft and 45 ft extension lengths may be used for single
OFFSET OFFSET OFFSET OFFSET
line lifting service.
6000
50
(72.6) 3. Radii listed are for a fully extended boom with the
5800 boom extension erected. For main boom lengths less
55 than fully extended, the rated loads are determined by
(70.8)
boom angle. Use only the column which corresponds
5500 to the boom extension length and offset for which the
60
(69.0) machine is configured. For boom angles not shown,
use the rating of the next lower boom angle.
5200 4900 4050
65
(67.0) (72.1) (70.4) Warning: Operation of this machine with heavier
4850 4650 4000 loads than the capacities listed is strictly prohibited.
70 Machine tipping with boom extension occurs rapidly
(65.0) (69.9) (68.8)
and without advance warning.
4500 4400 3950 2800
75
(62.9) (67.7) (67.2) (73.8) 4. Boom angle is the angle above or below horizontal of
4250 4150 3900 2700 the longitudinal axis of the boom base section after
80 lifting rated load.
(60.8) (65.4) (65.6) (71.9)
3950 4000 3800 2650 5. Capacities listed are with outriggers properly extended
85
(58.6) (63.1) (63.9) (70.0) and vertical jacks set only.
3450 3800 3550 2600
90
(56.1) (60.7) (62.0) (68.0)
2900 3450 3250 2550
95
(53.6) (58.1) (59.9) (66.0)
2400 2850 3000 2500
100
(50.9) (55.2) (57.8) (63.9)
1900 2350 2700 2450
105
(48.1) (52.2) (55.6) (61.8)
1500 1950 2300 2400
110
(45.2) (49.1) (53.2) (59.5)
1150 1450 1900 2350
115
(42.2) (45.8) (50.7) (57.2)
800 1050 1550 2150
120
(39.0) (42.3) (48.1) (54.5)
500 700 1250 1750
125
(35.5) (38.6) (45.5) (51.5)
400 950 1400
130
(34.5) (42.7) (48.5)
650 1050
135
(39.7) (45.2)
450 750
140
(36.7) (41.7)
450
145
(37.9)
Min. boom angle
for indicated length 34° 34° 36° 37°
(no load)
Max. boom length
at 0° boom angle 64 ft 64 ft
(no load)
NOTE: ( ) Boom angles are in degrees. 80034968
#LMI operating code. Refer to LMI manual for instructions.
*Capacities are structurally limited.
**26 ft capacities are applicable to both 26' fixed and 26' tele
extension.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
42 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS
NBT50/55: 128 ft main boom, 360°, full31.7
spanFT.outriggers,
- 128 FT. BOOM
3000 lb counterweight
ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #0001 or #1001


in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
100,000
8
(68.1)

92,250 40,050
10
(64.0) (71.3)
80,100 40,050 40,350
12
(59.8) (68.5) (73.3)
63,450 40,050 40,350 40,300
15
(53.1) (64.0) (69.9) (73.5)
46,300 40,050 40,350 40,300 34,100
20
(40.2) (56.2) (64.2) (68.8) (72.5)
31,650 36,500 36,950 37,150 30,100 22,650
25
(21.8) (47.5) (57.9) (63.9) (68.4) (71.5)
28,950 29,400 29,700 27,100 20,400 17,800
30
(37.3) (51.2) (58.6) (64.2) (68.0) (71.2)
22,300 23,900 24,300 24,550 18,500 16,300 14,700 12,900
35
(23.6) (43.8) (53.0) (59.8) (64.3) (68.0) (70.8) (73.2)
18,600 18,950 19,250 17,050 15,100 13,650 12,050 10,850
40
(35.2) (47.0) (55.0) (60.5) (64.8) (68.0) (70.8) (73.0)
14,800 15,150 15,450 15,650 14,000 12,550 11,300 10,250
45
(24.0) (40.2) (50.0) (56.5) (61.5) (65.0) (68.2) (70.8)
12,350 12,600 12,800 12,850 11,750 10,650 9650
50
(32.4) (44.5) (52.2) (58.0) (62.0) (65.8) (68.4)
10,300 10,600 10,800 11,000 10,950 10,000 8750
55
(23.3) (39.2) (48.1) (54.6) (59.2) (63.2) (65.9)
8850 9050 9250 9400 9400 7850
60
(32.3) (43.2) (50.6) (55.8) (60.4) (63.3)
7450 7650 7800 7950 8100 7000
65
(23.8) (37.8) (46.4) (52.2) (57.3) (60.6)
*4650 6500 6650 6800 6900 6300
70
(9.2) (31.7) (41.9) (48.5) (54.0) (57.9)
5500 5650 5800 5900 5700
75
(24.2) (37.0) (44.5) (50.7) (55.0)
*4400 4800 4950 5050 5150
80
(12.8) (31.4) (40.2) (47.2) (52.1)
4100 4200 4300 4400
85
(24.7) (35.6) (43.5) (48.9)
3450 3550 3650 3750
90
(15.2) (30.2) (39.5) (45.5)
3000 3100 3200
95
(23.8) (35.2) (42.0)
2500 2600 2700
100
(14.8) (30.2) (38.1)
2150 2250
105
(24.4) (33.9)
1750 1800
110
(16.6) (29.2)
1450
115
(23.5)
*1100
120
(15.8)
Minimum boom angle (°) for indicated length (no load) 0 5 8 10
Maximum boom length (ft.) at 0° boom angle (no load) 97
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C 75-D 86-E
12,900 7600 4850 3700 2200 1150

(27.5) (38.8) (19.8) (59.8) (70.8) (81.8)
NOTE: ( ) Reference radii in feet. 80034844A

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 43
Load chart
RATED LIFTING CAPACITIES IN POUNDS
31.7 FT. - 128 FT. BOOM WITH 26' FIXED or 26-45' TELE EXTENSION STOWED
NBT50/55: 128 ft main boom with extension stowed, 360° ,outriggers fully extended,
3000 lb counterweight ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #0002 or #1002


in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
98,850
8
(68.1)
91,100 39,250
10
(64.0) (71.3)
78,950 39,250 39,250
12
(59.8) (68.5) (73.3)
62,300 39,250 39,250 39,250
15
(53.1) (64.0) (69.9) (73.5)
45,150 39,250 39,250 39,250 33,650
20
(40.2) (56.2) (64.2) (68.8) (72.5)
30,500 35,700 36,350 36,650 29,650 22,250
25
(21.8) (47.5) (57.9) (63.9) (68.4) (71.5)
28,150 28,800 29,200 26,650 20,000 17,450
30
(37.3) (51.2) (58.6) (64.2) (68.0) (71.2)
21,500 23,300 23,800 24,100 18,100 15,950 14,400 12,600
35
(23.6) (43.8) (53.0) (59.8) (64.3) (68.0) (70.8) (73.2)
18,000 18,450 18,800 16,650 14,750 13,350 11,750 10,600
40
(35.2) (47.0) (55.0) (60.5) (64.8) (68.0) (70.8) (73.0)
14,200 14,650 15,000 15,250 13,650 12,250 11,000 10,000
45
(24.0) (40.2) (50.0) (56.5) (61.5) (65.0) (68.2) (70.8)
11,850 12,150 12,400 12,500 11,450 10,350 9400
50
(32.4) (44.5) (52.2) (58.0) (62.0) (65.8) (68.4)
9800 10,150 10,400 10,650 10,650 9700 8500
55
(23.3) (39.2) (48.1) (54.6) (59.2) (63.2) (65.9)
8400 8650 8900 9100 9100 7600
60
(32.3) (43.2) (50.6) (55.8) (60.4) (63.3)
7000 7250 7450 7650 7800 6750
65
(23.8) (37.8) (46.4) (52.2) (57.3) (60.6)
*4200 6100 6300 6500 6600 6050
70
(9.2) (31.7) (41.9) (48.5) (54.0) (57.9)
5100 5300 5500 5600 5450
75
(24.2) (37.0) (44.5) (50.7) (55.0)
*4000 4450 4650 4750 4900
80
(12.8) (31.4) (40.2) (47.2) (52.1)
3750 3900 4000 4150
85
(24.7) (35.6) (43.5) (48.9)
3100 3250 3350 3500
90
(15.2) (30.2) (39.5) (45.5)
2700 2800 2950
95
(23.8) (35.2) (42.0)
2200 2300 2,450
100
(14.8) (30.2) (38.1)
1850 2000
105
(24.4) (33.9)
1450 1550
110
(16.6) (29.2)
1200
115
(23.5)
*850
120
(15.8)
Minimum boom angle (°) for indicated length (no load) 0 5 8 10
Maximum boom length (ft ) at 0° boom angle (no load) 97
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C 75-D 86-E
11,750 6800 4250 3200 1750 750

(27.5) (38.8) (19.8) (59.8) (70.8) (81.8)
NOTE: ( ) Reference radii in feet. 80034845A

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
44 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS
31.7 FT. - 128 FT. BOOM WITH 26' FIXEDerected
NBT50/55: 128 ft main boom with extension ERECTEDandorretracted,
26-45' EXT360°,
ERECTED, RETRACTED
outriggers fully
extended,3000 lb counterweight
ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #0017 or #1017


in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
97,450
8
(68.1)
89,700 37,700
10
(64.0) (71.3)
77,550 37,700 37,700
12
(59.8) (68.5) (73.3)
60,900 37,700 37,700 37,700
15
(53.1) (64.0) (69.9) (73.5)
43,750 37,700 37,700 37,700 32,000
20
(40.2) (56.2) (64.2) (68.8) (72.5)
29,100 34,150 34,700 35,000 28,000 20,550
25
(21.8) (47.5) (57.9) (63.9) (68.4) (71.5)
26,600 27,150 27,550 25,000 18,300 15,750
30
(37.3) (51.2) (58.6) (64.2) (68.0) (71.2)
19,950 21,650 22,150 22,450 16,400 14,250 12,650 10,900
35
(23.6) (43.8) (53.0) (59.8) (64.3) (68.0) (70.8) (73.2)
16,350 16,800 17,150 14,950 13,050 11,600 10,050 8850
40
(35.2) (47.0) (55.0) (60.5) (64.8) (68.0) (70.8) (73.0)
12,550 13,000 13,350 13,550 11,950 10,500 9300 8250
45
(24.0) (40.2) (50.0) (56.5) (61.5) (65.0) (68.2) (70.8)
10,200 10,500 10,700 10,800 9700 8650 7650
50
(32.4) (44.5) (52.2) (58.0) (62.0) (65.8) (68.4)
8150 8500 8700 8950 8900 8000 6750
55
(23.3) (39.2) (48.1) (54.6) (59.2) (63.2) (65.9)
6750 6950 7200 7350 7400 5850
60
(32.3) (43.2) (50.6) (55.8) (60.4) (63.3)
5350 5550 5750 5900 6100 5000
65
(23.8) (37.8) (46.4) (52.2) (57.3) (60.6)
*2550 4400 4600 4750 4900 4300
70
(9.2) (31.7) (41.9) (48.5) (54.0) (57.9)
3400 3600 3750 3900 3700
75
(24.2) (37.0) (44.5) (50.7) (55.0)
*2300 2750 2900 3050 3150
80
(12.8) (31.4) (40.2) (47.2) (52.1)
2050 2150 2300 2400
85
(24.7) (35.6) (43.5) (48.9)
1400 1500 1650 1750
90
(15.2) (30.2) (39.5) (45.5)
950 1100 1200
95
(23.8) (35.2) (42.0)
450 600 700
100
(14.8) (30.2) (38.1)
Minimum boom angle (°) for indicated
0 2 5 7 14 29 34
length (no load)
Maximum boom length (ft) at 0° boom
64
angle (no load)
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C
10,350 5250 2600 1550

(27.5) (38.8) (19.8) (59.8)
NOTE: ( ) Reference radii in feet. 80034846A

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 45
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 3000 lb COUNTERWEIGHT
31.7' - 128' BOOM WITH 26-45' EXT ERECTED, EXTENDED
NBT50/55: 128 ft main boom with extension erected and extended, 360° outriggers fully extended,
3000 lb counterweight ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #0018 or #1018


in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
97,050
8
(68.1)
89,300 37,400
10
(64.0) (71.3)
77,150 37,400 37,400
12
(59.8) (68.5) (73.3)
60,500 37,400 37,400 37,400
15
(53.1) (64.0) (69.9) (73.5)
43,350 37,400 37,400 37,400 31,850
20
(40.2) (56.2) (64.2) (68.8) (72.5)
28,700 33,850 34,500 34,800 27,850 20,450
25
(21.8) (47.5) (57.9) (63.9) (68.4) (71.5)
26,300 26,950 27,350 24,850 18,200 15,650
30
(37.3) (51.2) (58.6) (64.2) (68.0) (71.2)
19,650 21,450 21,950 22,300 16,300 14,150 12,550 10,800
35
(23.6) (43.8) (53.0) (59.8) (64.3) (68.0) (70.8) (73.2)
16,150 16,600 17,000 14,850 12,950 11,500 9950 8750
40
(35.2) (47.0) (55.0) (60.5) (64.8) (68.0) (70.8) (73.0)
12,350 12,800 13,200 13,450 11,850 10,400 9200 8150
45
(24.0) (40.2) (50.0) (56.5) (61.5) (65.0) (68.2) (70.8)
10,000 10,350 10,600 10,700 9600 8550 7550
50
(32.4) (44.5) (52.2) (58.0) (62.0) (65.8) (68.4)
7950 8350 8600 8850 8800 7900 6650
55
(23.3) (39.2) (48.1) (54.6) (59.2) (63.2) (65.9)
6600 6850 7100 7250 7300 5750
60
(32.3) (43.2) (50.6) (55.8) (60.4) (63.3)
5200 5450 5650 5800 6000 4900
65
(23.8) (37.8) (46.4) (52.2) (57.3) (60.6)
*2400 4300 4500 4650 4800 4200
70
(9.2) (31.7) (41.9) (48.5) (54.0) (57.9)
3300 3500 3650 3800 3600
75
(24.2) (37.0) (44.5) (50.7) (55.0)
*2200 2650 2800 2950 3050
80
(12.8) (31.4) (40.2) (47.2) (52.1)
1950 2050 2200 2300
85
(24.7) (35.6) (43.5) (48.9)
1300 1400 1550 1650
90
(15.2) (30.2) (39.5) (45.5)
850 1000 1100
95
(23.8) (35.2) (42.0)
500 600
100
(30.2) (38.1)
Minimum boom angle (°) for indicated
0 3 6 10 18 29 36
length (no load)
Maximum boom length (ft) at 0° boom
64
angle (no load)
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C
9950 4950 2400 1350

(27.5) (38.8) (19.8) (59.8)
NOTE: ( ) Reference radii in feet. 80034848A

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
46 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 3000 lb COUNTERWEIGHT
31.7 FT. - 128 FT. BOOM
NBT50/55: 128 ft main boom, over rear, outriggers fully extended, 360°, 3000 lb counterweight
ON OUTRIGGERS FULLY EXTENDED - OVER REAR

Radius #0003 or #1003


in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
100,000
8
(68.1)
92,250 40,050
10
(64.0) (71.3)
80,100 40,050 40,350
12
(59.8) (68.5) (73.3)
63,450 40,050 40,350 40,300
15
(53.1) (64.0) (69.9) (73.5)
46,300 40,050 40,350 40,300 34,100
20
(40.2) (56.2) (64.2) (68.8) (72.5)
31,650 36,500 36,950 37,150 30,100 22,650
25
(21.8) (47.5) (57.9) (63.9) (68.4) (71.5)
28,950 29,400 29,700 27,100 20,400 17,800
30
(37.3) (51.2) (58.6) (64.2) (68.0) (71.2)
22,300 24,000 24,300 24,550 18,500 16,300 14,700 12,900
35
(23.6) (43.8) (53.0) (59.8) (64.3) (68.0) (70.8) (73.2)
20,000 20,300 20,550 17,050 15,100 13,650 12,050 10,850
40
(35.2) (47.0) (55.1) (60.5) (64.8) (68.0) (70.8) (73.0)
16,400 16,800 17,050 15,800 14,000 12,550 11,300 10,250
45
(24.0) (40.3) (50.0) (56.5) (61.5) (65.0) (68.2) (70.8)
13,900 14,150 14,350 12,850 11,750 10,650 9650
50
(32.4) (44.6) (52.3) (58.0) (62.0) (65.8) (68.4)
11,650 11,900 12,100 12,000 10,950 10,000 8750
55
(22.2) (38.6) (47.8) (54.4) (59.2) (63.2) (65.9)
10,200 10,400 10,550 10,300 9400 7850
60
(32.4) (43.3) (50.8) (56.0) (60.4) (63.3)
8700 8900 9050 9200 8850 7000
65
(23.9) (38.0) (46.6) (52.5) (57.5) (60.6)
*4650 7650 7850 7950 8100 6300
70
(9.2) (31.8) (42.1) (48.7) (54.4) (57.9)
6600 6750 6900 7000 5700
75
(24.3) (37.2) (44.8) (51.0) (55.0)
*4400 5850 6,000 6100 5150
80
(12.8) (31.6) (40.5) (47.5) (52.1)
5100 5200 5300 4650
85
(24.9) (35.8) (43.8) (49.0)
*3850 4500 4600 4150
90
(15.3) (30.5) (39.8) (45.7)
3900 4000 3700
95
(24.1) (35.5) (42.2)
*2800 3450 3300
100
(14.9) (30.5) (38.4)
2950 3000
105
(24.7) (34.3)
*2400 2600
110
(16.8) (29.5)
*1900
115
(23.7)
*1100
120
(15.8)
Minimum boom angle (°) for indicated length (no load) 0 5 8 10
Maximum boom length (ft.) at 0° boom angle (no load) 97
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C 75-D 86-E
12,900 7600 4850 3700 2200 1150

(27.5) (38.8) (19.8) (59.8) (70.8) (81.8)
NOTE: ( ) Reference radii in feet. 80034849A

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 47
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 3000 lb COUNTERWEIGHT
31.7' - 128' BOOM WITH 26' FIXED or 26-45' TELE EXTENSION STOWED
NBT50/55: 128 ft main boom with extension stowed over rear, outriggers fully extended, 3000 lb
ON OUTRIGGERS FULLY EXTENDED - OVER REAR
counterweight

Radius #0004 or #1004


in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
98,850
8
(68.1)
91,100 39,250
10
(64.0) (71.3)
78,950 39,250 39,250
12
(59.8) (68.5) (73.3)
62,300 39,250 39,250 39,250
15
(53.1) (64.0) (69.9) (73.5)
45,150 39,250 39,250 39,250 33,650
20
(40.2) (56.2) (64.2) (68.8) (72.5)
30,500 35,700 36,350 36,650 29,650 22,250
25
(21.8) (47.5) (57.9) (63.9) (68.4) (71.5)
28,150 28,800 29,200 26,650 20,000 17,450
30
(37.3) (51.2) (58.6) (64.2) (68.0) (71.2)
21,500 23,400 23,800 24,100 18,100 15,950 14,400 12,600
35
(23.6) (43.8) (53.0) (59.8) (64.3) (68.0) (70.8) (73.2)
19,400 19,800 20,100 16,650 14,750 13,350 11,750 10,600
40
(35.2) (47.0) (55.1) (60.5) (64.8) (68.0) (70.8) (73.0)
15,800 16,300 16,600 15,400 13,650 12,250 11,000 10,000
45
(24.0) (40.3) (50.0) (56.5) (61.5) (65.0) (68.2) (70.8)
13,400 13,700 13,950 12,500 11,450 10,350 9400
50
(32.4) (44.6) (52.3) (58.0) (62.0) (65.8) (68.4)
11,150 11,450 11,700 11,650 10,650 9700 8500
55
(22.2) (38.6) (47.8) (54.4) (59.2) (63.2) (65.9)
9750 10,000 10,200 10,000 9100 7600
60
(32.4) (43.3) (50.8) (56.0) (60.4) (63.3)
8250 8500 8700 8900 8550 6750
65
(23.9) (38.0) (46.6) (52.5) (57.5) (60.6)
*4200 7250 7500 7650 7800 6050
70
(9.2) (31.8) (42.1) (48.7) (54.4) (57.9)
6200 6400 6600 6700 5450
75
(24.3) (37.2) (44.8) (51.0) (55.0)
*4000 5500 5700 5800 4900
80
(12.8) (31.6) (40.5) (47.5) (52.1)
4750 4900 5000 4400
85
(24.9) (35.8) (43.8) (49.0)
*3500 4200 4300 3900
90
(15.3) (30.5) (39.8) (45.7)
3600 3700 3450
95
(24.1) (35.5) (42.2)
*2500 3150 3050
100
(14.9) (30.5) (38.4)
2650 2750
105
(24.7) (34.3)
*2100 2350
110
(16.8) (29.5)
*1650
115
(23.7)
*850
120
(15.8)
Minimum boom angle (°) for indicated length (no load) 0 5 8 10
Maximum boom length (ft ) at 0° boom angle (no load) 97
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C 75-D 86-E
11,750 6,800 4,250 3,200 1,750 750

(27.5) (38.8) (19.8) (59.8) (70.8) (81.8)
NOTE: ( ) Reference radii in feet. 80034850A

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
48 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
ED AND 26 FT. - 45 FT. TELE OFFSETTABLE BOOM EXTENSION
WITH 3000 lb COUNTERWEIGHT

ON OUTRIGGERS FULLY EXTENDED - 360°


Load chart
NBT50/55-128: Extension information, 360°, outriggers fully extended, 3000 lb counterweight

**26 ft LENGTH 45 ft LENGTH


Radius Boom extension capacity notes:
#0005 or #0007 or #0009 or #0011 or 1. All capacities above the bold line are based on
in #1005 #1007 #1009 #1011
feet structural strength limitations.
0° 30° 0° 30°
OFFSET OFFSET OFFSET OFFSET 2. 26 ft and 45 ft extension lengths may be used for single
6000 line lifting service.
50
(72.6)
3. Radii listed are for a fully extended boom with the
5800 boom extension erected. For main boom lengths less
55
(70.8) than fully extended, the rated loads are determined by
5500 boom angle. Use only the column which corresponds
60 to the boom extension length and offset for which the
(69.0)
machine is configured. For boom angles not shown,
5200 4900 4050 use the rating of the next lower boom angle.
65
(67.0) (72.1) (70.4)
4850 4650 4000 Warning: Operation of this machine with heavier
70 loads than the capacities listed is strictly prohibited.
(65.0) (69.9) (68.8)
Machine tipping with boom extension occurs rapidly
4500 4400 3950 2800 and without advance warning.
75
(62.9) (67.7) (67.2) (73.8)
4250 4150 3900 2700 4. Boom angle is the angle above or below horizontal of
80 the longitudinal axis of the boom base section after
(60.8) (65.4) (65.6) (71.9)
lifting rated load.
3950 4000 3800 2650
85
(58.6) (63.1) (63.9) (70.0) 5. Capacities listed are with outriggers properly extended
3600 3800 3550 2600 and vertical jacks set only.
90
(56.2) (60.7) (62.0) (68.0)
3000 3550 3250 2550
95
(53.6) (58.2) (59.9) (66.0)
2450 2950 3000 2500
100
(50.9) (55.3) (57.8) (63.9)
2,000 2450 2700 2450
105
(48.2) (51.5) (55.6) (61.8)
1600 1950 2400 2400
110
(45.3) (49.1) (53.3) (59.5)
1200 1500 2000 2350
115
(42.2) (45.8) (50.8) (57.2)
850 1100 1650 2200
120
(39.0) (42.4) (48.3) (54.6)
550 750 1300 1800
125
(35.6) (38.6) (45.6) (51.6)
1000 1450
130
(42.8) (48.5)
700 1050
135
(39.8) (45.2)
450 800
140
(36.7) (41.7)
500
145
(37.9)
Min. boom angle
for indicated length 34° 34° 36° 36°
(no load)
Max. boom length
at 0° boom angle 64 ft 64 ft
(no load)
NOTE: ( ) Boom angles are in degrees. 80034857B
#LMI operating code. Refer to LMI manual for instructions.
**26 ft capacities are applicable to both 26 ft fixed and 26 ft tele
extension.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 49
Load chart
6 FT. FIXED AND 26 FT. - 45 FT. TELE OFFSETTABLE BOOM EXTENSION
WITH 3000 lb COUNTERWEIGHT
NBT50/55-128: Extension information, over rear, outriggers fully extended, 3000 lb counterweight
ON OUTRIGGERS FULLY EXTENDED - OVER REAR

Boom extension capacity notes:


**26 ft LENGTH 45 ft LENGTH 1. All capacities above the bold line are based on
Radius structural strength limitations.
in #0006 #0008 #0010 #0012
feet 2. 26 ft and 45 ft extension lengths may be used for single
0° 30° 0° 30°
OFFSET OFFSET OFFSET OFFSET
line lifting service.
6000 3. Radii listed are for a fully extended boom with the
50
(72.6) boom extension erected. For main boom lengths less
5800 than fully extended, the rated loads are determined by
55 boom angle. Use only the column which corresponds
(70.8)
5500 to the boom extension length and offset for which the
60 machine is configured. For boom angles not shown,
(69.0)
use the rating of the next lower boom angle.
5200 4900 4050
65
(67.0) (72.1) (70.4) Warning: Operation of this machine with heavier
4850 4650 4000 loads than the capacities listed is strictly prohibited.
70 Machine tipping with boom extension occurs rapidly
(65.0) (69.9) (68.8)
and without advance warning.
4500 4400 3950 2800
75
(62.9) (67.7) (67.2) (73.8)
4. Boom angle is the angle above or below horizontal of
4250 4150 3900 2700 the longitudinal axis of the boom base section after
80
(60.8) (65.4) (65.6) (71.9) lifting rated load.
3950 4000 3800 2650
85 5. Capacities listed are with outriggers properly extended
(58.6) (63.1) (63.9) (70.0)
and vertical jacks set only.
3800 3800 3550 2600
90
(56.4) (60.7) (62.0) (68.0)
3650 3650 3250 2550
95
(54.1) (58.3) (59.9) (66.0)
3150 3350 3000 2500
100
(51.5) (55.6) (57.8) (63.9)
2600 2900 2700 2450
105
(48.6) (52.6) (55.6) (61.8)
2100 2550 2500 2400
110
(45.7) (49.6) (53.5) (59.5)
1700 2150 2300 2350
115
(42.6) (46.3) (51.2) (57.2)
1350 1650 2050 2300
120
(39.4) (42.8) (48.7) (54.7)
950 1200 1750 2250
125
(35.9) (39.0) (46.1) (52.1)
650 850 1500 2100
130
(32.1) (34.8) (43.4) (49.2)
450 1200 1700
135
(30.0) (40.4) (45.8)
900 *1350
140
(37.3) (42.3)
650 *900
145
(33.9) (38.3)
*600
150
(33.9)
Min. boom angle
for indicated length 29° 30° 30° 31°
(no load)
Max. boom length
at 0° boom angle 64 ft 64 ft
(no load)
NOTE: ( ) Boom angles are in degrees. 80034858A
#LMI operating code. Refer to LMI manual for instructions.
*Capacities are structurally limited.
**26 ft. capacities are applicable to both 26' fixed and 26' tele
extension.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 6000 lb COUNTERWEIGHT
31.7 FT. - 128 FT. BOOM
NBT55: 128 ft main boom, 360°, full span outriggers, 6000 lb counterweight
ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #0001
in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
110,000
8
(68.1)
92,300 40,050
10
(64.0) (71.3)
81,200 40,050 40,350
12
(59.8) (68.5) (73.3)
65,400 40,050 40,350 40,300
15
(53.1) (64.0) (69.9) (73.5)
47,750 40,050 40,350 40,300 34,100
20
(40.3) (56.2) (64.2) (68.8) (72.5)
31,650 37,700 38,150 37,150 30,100 22,650
25
(21.8) (47.5) (58.0) (63.9) (68.4) (71.5)
30,200 30,700 31,000 27,100 20,400 17,800
30
(37.3) (51.3) (58.6) (64.2) (68.0) (71.2)
22,300 25,100 25,350 24,600 18,500 16,300 14,700 12,900
35
(23.6) (43.9) (53.1) (59.8) (64.3) (68.0) (70.8) (73.2)
20,700 21,050 21,350 17,050 15,100 13,650 12,050 10,850
40
(35.2) (47.0) (55.1) (60.5) (64.7) (68.0) (70.8) (73.0)
*16,400 16,950 17,200 15,800 14,000 12,550 11,300 10,250
45
(24.0) (40.3) (50.0) (56.5) (61.5) (65.0) (68.2) (70.8)
13,900 14,150 14,400 12,850 11,750 10,650 9650
50
(32.4) (44.6) (52.3) (58.0) (62.0) (65.8) (68.4)
11,600 11,850 12,050 12,000 10,950 10,000 8750
55
(22.2) (38.6) (47.8) (54.4) (59.2) (63.2) (65.9)
10,100 10,300 10,450 10,300 9400 7850
60
(32.4) (43.3) (50.8) (56.0) (60.4) (63.3)
8550 8750 8950 9100 8850 7000
65
(23.9) (37.9) (46.6) (52.4) (57.5) (60.6)
*4650 7500 7650 7800 7950 6300
70
(9.2) (31.8) (42.1) (48.7) (54.3) (57.9)
6450 6600 6750 6850 5700
75
(24.3) (37.2) (44.7) (51.0) (55.0)
*4400 5700 5800 5950 5150
80
(12.8) (31.6) (40.5) (47.5) (52.1)
4900 5000 5150 4650
85
(24.8) (35.8) (43.8) (49.0)
*3850 4300 4450 4150
90
(15.3) (30.4) (39.8) (45.7)
3700 3800 3700
95
(24.0) (35.4) (42.2)
*2800 3300 3300
100
(14.9) (30.5) (38.4)
2800 2850
105
(24.6) (34.2)
2350 2450
110
(16.8) (29.5)
*1900
115
(23.7)
*1100
120
(15.8)
Minimum boom angle (°) for indicated length (no load) 0 5 8 10
Maximum boom length (ft ) at 0° boom angle (no load) 97
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C 75-D 86-E
12,900 7600 4850 3700 2200 1150

(27.5) (38.8) (19.8) (59.8) (70.8) (81.8)
NOTE: ( ) Reference radii in feet. 80034324

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 51
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 6000 lb COUNTERWEIGHT
31.7' - 128' BOOM WITH 26' FIXED or 26-45' TELE EXTENSION STOWED
NBT55: 128 ft main boom with extension stowed, 360°, outriggers fully extended,
6000 lb counterweight ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #0002
in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
108,850
8
(68.1)
91,150 39,250
10
(64.0) (71.3)
80,050 39,250 39,250
12
(59.8) (68.5) (73.3)
64,250 39,250 39,250 39,250
15
(53.1) (64.0) (69.9) (73.5)
46,600 39,250 39,250 39,250 33,650
20
(40.3) (56.2) (64.2) (68.8) (72.5)
30,500 36,900 37,550 36,650 29,650 22,250
25
(21.8) (47.5) (58.0) (63.9) (68.4) (71.5)
29,400 30,100 30,500 26,650 20,000 17,450
30
(37.3) (51.3) (58.6) (64.2) (68.0) (71.2)
21,500 24,500 24,850 24,150 18,100 15,950 14,400 12,600
35
(23.6) (43.9) (53.1) (59.8) (64.3) (68.0) (70.8) (73.2)
20,100 20,550 20,900 16,650 14,750 13,350 11,750 10,600
40
(35.2) (47.0) (55.1) (60.5) (64.7) (68.0) (70.8) (73.0)
15,800 16,450 16,750 15,400 13,650 12,250 11,000 10,000
45
(24.0) (40.3) (50.0) (56.5) (61.5) (65.0) (68.2) (70.8)
13,400 13,700 14,000 12,500 11,450 10,350 9400
50
(32.4) (44.6) (52.3) (58.0) (62.0) (65.8) (68.4)
11,100 11,400 11,650 11,650 10,650 9700 8500
55
(22.2) (38.6) (47.8) (54.4) (59.2) (63.2) (65.9)
9650 9900 10,100 10,000 9100 7600
60
(32.4) (43.3) (50.8) (56.0) (60.4) (63.3)
8100 8350 8600 8800 8550 6750
65
(23.9) (37.9) (46.6) (52.4) (57.5) (60.6)
*4200 7100 7300 7500 7650 6050
70
(9.2) (31.8) (42.1) (48.7) (54.3) (57.9)
6050 6250 6450 6550 5450
75
(24.3) (37.2) (44.7) (51.0) (55.0)
*4000 5350 5500 5650 4900
80
(12.8) (31.6) (40.5) (47.5) (52.1)
4550 4700 4850 4400
85
(24.8) (35.8) (43.8) (49.0)
*3500 4000 4150 3900
90
(15.3) (30.4) (39.8) (45.7)
3400 3500 3450
95
(24.0) (35.4) (42.2)
*2500 3000 3050
100
(14.9) (30.5) (38.4)
2500 2600
105
(24.6) (34.2)
2050 2200
110
(16.8) (29.5)
*1650
115
(23.7)
*850
120
(15.8)
Minimum boom angle (°) for indicated length (no load) 0 5 8 10
Maximum boom le ngth (ft ) at 0° boom angle (no load) 97
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C 75-D 86-E
11,750 6,800 4,250 3,200 1,750 750

(27.5) (38.8) (19.8) (59.8) (70.8) (81.8)
NOTE: ( ) Reference radii in feet. 80034325

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
52 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 6000 lb COUNTERWEIGHT
31.7' - 128' BOOM WITH 26' FIXED ERECTED or 26-45' EXT ERECTED, RETRACTED
NBT55: 128 ft main boom with extension erected and retracted, 360°, outriggers fully extended,
6000 lb counterweight ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #0017
in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
107,450
8
(68.1)
89,750 37,700
10
(64.0) (71.3)
78,650 37,700 37,700
12
(59.8) (68.5) (73.3)
62,850 37,700 37,700 37,700
15
(53.1) (64.0) (69.9) (73.5)
45,200 37,700 37,700 37,700 32,000
20
(40.3) (56.2) (64.2) (68.8) (72.5)
29,100 35,350 35,900 35,000 28,000 20,550
25
(21.8) (47.5) (58.0) (63.9) (68.4) (71.5)
27,850 28,450 28,850 25,000 18,300 15,750
30
(37.3) (51.3) (58.6) (64.2) (68.0) (71.2)
19,950 22,850 23,200 22,500 16,400 14,250 12,650 10,900
35
(23.6) (43.9) (53.1) (59.8) (64.3) (68.0) (70.8) (73.2)
18,450 18,900 19,250 14,950 13,050 11,600 10,050 8850
40
(35.2) (47.0) (55.1) (60.5) (64.7) (68.0) (70.8) (73.0)
*14,150 14,800 15,100 13,700 11,950 10,500 9300 8250
45
(24.0) (40.3) (50.0) (56.5) (61.5) (65.0) (68.2) (70.8)
11,750 12,050 12,300 10,800 9700 8650 7650
50
(32.4) (44.6) (52.3) (58.0) (62.0) (65.8) (68.4)
9450 9750 9950 9950 8900 8000 6750
55
(22.2) (38.6) (47.8) (54.4) (59.2) (63.2) (65.9)
8000 8200 8400 8250 7400 5850
60
(32.4) (43.3) (50.8) (56.0) (60.4) (63.3)
6450 6650 6900 7050 6850 5000
65
(23.9) (37.9) (46.6) (52.4) (57.5) (60.6)
*2550 5400 5600 5750 5950 4300
70
(9.2) (31.8) (42.1) (48.7) (54.3) (57.9)
4350 4550 4700 4850 3700
75
(24.3) (37.2) (44.7) (51.0) (55.0)
*2300 3650 3750 3950 3150
80
(12.8) (31.6) (40.5) (47.5) (52.1)
2850 2950 3150 2650
85
(24.8) (35.8) (43.8) (49.0)
*1800 2250 2450 2150
90
(15.3) (30.4) (39.8) (45.7)
1650 1800 1700
95
(24.0) (35.4) (42.2)
*750 1300 1300
100
(14.9) (30.5) (38.4)
800 850
105
(24.6) (34.2)
450
110
(29.5)
Minimum boom angle (°) for indicated
0 2 5 7 11 19 29
length (no load)
Maximum boom length (ft) at 0° boom
64
angle (no load)
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C
10,350 5250 2600 1550

(27.5) (38.8) (19.8) (59.8)
NOTE: ( ) Reference radii in feet. 80034326

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 53
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 6000 lb COUNTERWEIGHT
31.7' - 128' BOOM WITH 26-45' EXT ERECTED, EXTENDED
NBT55: 128 ft main boom with extension erected and extended, 360°, outriggers fully extended,
6000 lb counterweight ON OUTRIGGERS FULLY EXTENDED - 360°

Radius #0018
in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
107,050
8
(68.1)
89,350 37,400
10
(64.0) (71.3)
78,250 37,400 37,400
12
(59.8) (68.5) (73.3)
62,450 37,400 37,400 37,400
15
(53.1) (64.0) (69.9) (73.5)
44,800 37,400 37,400 37,400 31,850
20
(40.3) (56.2) (64.2) (68.8) (72.5)
28,700 35,050 35,700 34,800 27,850 20,450
25
(21.8) (47.5) (58.0) (63.9) (68.4) (71.5)
27,550 28,250 28,650 24,850 18,200 15,650
30
(37.3) (51.3) (58.6) (64.2) (68.0) (71.2)
19,650 22,650 23,000 22,350 16,300 14,150 12,550 10,800
35
(23.6) (43.9) (53.1) (59.8) (64.3) (68.0) (70.8) (73.2)
18,250 18,700 19,100 14,850 12,950 11,500 9950 8750
40
(35.2) (47.0) (55.1) (60.5) (64.7) (68.0) (70.8) (73.0)
*13,950 14,600 14,950 13,600 11,850 10,400 9200 8150
45
(24.0) (40.3) (50.0) (56.5) (61.5) (65.0) (68.2) (70.8)
11,550 11,900 12,200 10,700 9600 8550 7550
50
(32.4) (44.6) (52.3) (58.0) (62.0) (65.8) (68.4)
9250 9600 9850 9850 8800 7900 6650
55
(22.2) (38.6) (47.8) (54.4) (59.2) (63.2) (65.9)
7850 8100 8300 8150 7300 5750
60
(32.4) (43.3) (50.8) (56.0) (60.4) (63.3)
6300 6550 6800 6950 6750 4900
65
(23.9) (37.9) (46.6) (52.4) (57.5) (60.6)
*2400 5300 5500 5650 5850 4200
70
(9.2) (31.8) (42.1) (48.7) (54.3) (57.9)
4250 4450 4600 4750 3600
75
(24.3) (37.2) (44.7) (51.0) (55.0)
*2200 3550 3650 3850 3050
80
(12.8) (31.6) (40.5) (47.5) (52.1)
2750 2850 3050 2550
85
(24.8) (35.8) (43.8) (49.0)
*1700 2150 2350 2050
90
(15.3) (30.4) (39.8) (45.7)
1550 1700 1600
95
(24.0) (35.4) (42.2)
*650 1200 1200
100
(14.9) (30.5) (38.4)
700 750
105
(24.6) (34.2)
Minimum boom angle (°) for indicated
0 3 6 10 14 20 30
length (no load)
Maximum boom length (ft) at 0° boom
64
angle (no load)
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C
9950 4950 2400 1350

(27.5) (38.8) (19.8) (59.8)
NOTE: ( ) Reference radii in feet. 80034327

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
54 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 6000 lb COUNTERWEIGHT
31.7 FT. - 128 FT. BOOM
NBT55: 128 ft main boom, over rear, outriggers fully extended, 6000 lb counterweight
ON OUTRIGGERS FULLY EXTENDED - OVER REAR

Radius #0003
in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
110,000
8
(68.1)
92,300 40,050
10
(64.0) (71.3)
81,200 40,050 40,350
12
(59.8) (68.5) (73.3)
65,400 40,050 40,350 40,300
15
(53.1) (64.0) (69.9) (73.5)
47,750 40,050 40,350 40,300 34,100
20
(40.3) (56.2) (64.2) (68.8) (72.5)
31,650 37,700 38,150 37,150 30,100 22,650
25
(21.8) (47.5) (58.0) (63.6) (68.4) (71.5)
30,200 30,700 31,000 27,100 20,400 17,800
30
(37.3) (51.3) (58.3) (64.2) (67.8) (71.2)
22,300 25,100 25,350 24,600 18,500 16,300 14,700 12,900
35
(23.6) (43.9) (52.7) (59.8) (64.0) (68.0) (70.8) (73.2)
20,950 21,250 21,500 17,050 15,100 13,650 12,050 10,850
40
(35.2) (47.3) (55.1) (60.4) (64.8) (68.0) (70.8) (73.0)
16,400 18,000 18,250 15,800 14,000 12,550 11,300 10,250
45
(24.0) (40.7) (50.1) (56.4) (61.5) (65.0) (68.2) (70.8)
15,250 15,500 14,600 12,850 11,750 10,650 9650
50
(33.0) (44.7) (52.1) (58.0) (62.0) (65.8) (68.4)
*11,900 13,100 13,300 12,000 10,950 10,000 8750
55
(23.2) (38.7) (47.6) (54.4) (59.2) (63.2) (65.9)
11,200 11,400 11,250 10,300 9400 7850
60
(32.5) (42.8) (50.5) (56.0) (60.4) (63.3)
9700 9900 10,100 9700 8850 7000
65
(23.9) (37.4) (46.8) (52.6) (57.5) (60.6)
*4650 8600 8750 8900 8400 6300
70
(9.2) (31.3) (42.3) (48.9) (54.5) (57.9)
7450 7600 7750 7900 5700
75
(23.8) (37.3) (45.0) (51.3) (55.0)
*4400 6650 6800 6900 5150
80
(12.6) (31.7) (40.7) (47.8) (52.1)
5800 5950 6050 4650
85
(25.0) (36.0) (44.1) (49.0)
*3850 5200 5300 4150
90
(15.3) (30.7) (40.1) (45.7)
4550 4650 3700
95
(24.2) (35.7) (42.2)
*2800 4050 3300
100
(14.9) (30.8) (38.4)
3550 3000
105
(24.9) (34.3)
*2400 2650
110
(16.8) (29.6)
1900
115
(23.7)
1100
120
(15.8)
Minimum boom angle (°) for indicated length (no load) 0 5 8 10
Maximum boom le ngth (ft ) at 0° boom angle (no load) 97
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C 75-D 86-E
12,900 7600 4850 3700 2200 1150

(27.5) (38.8) (19.8) (59.8) (70.8) (81.8)
NOTE: ( ) Reference radii in feet. 80034328

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 55
Load chart
RATED LIFTING CAPACITIES IN POUNDS WITH 6000 lb COUNTERWEIGHT
31.7' - 128' BOOM WITH 26' FIXED or 26-45' TELE EXTENSION STOWED
NBT55: 128 ft main boom with extension stowed, over rear, outriggers fully extended,
6000 lb counterweight ON OUTRIGGERS FULLY EXTENDED - OVER REAR

Radius #0004
in Main boom length in feet
feet 31.7 43-A 54-B 64-C 75-D 86-E 97-F 107-G 118-H 128
108,850
8
(68.1)
91,150 39,250
10
(64.0) (71.3)
80,050 39,250 39,250
12
(59.8) (68.5) (73.3)
64,250 39,250 39,250 39,250
15
(53.1) (64.0) (69.9) (73.5)
46,600 39,250 39,250 39,250 33,650
20
(40.3) (56.2) (64.2) (68.8) (72.5)
30,500 36,900 37,550 36,650 29,650 22,250
25
(21.8) (47.5) (58.0) (63.9) (68.4) (71.5)
29,400 30,100 30,500 26,650 20,000 17,450
30
(37.3) (51.3) (58.6) (64.2) (68.0) (71.2)
21,500 24,500 24,850 24,150 18,100 15,950 14,400 12,600
35
(23.6) (43.9) (53.1) (59.8) (64.3) (68.0) (70.8) (73.2)
20,350 20,750 21,050 16,650 14,750 13,350 11,750 10,600
40
(35.2) (47.0) (55.1) (60.5) (64.8) (68.0) (70.8) (73.0)
15,800 17,500 17,800 15,400 13,650 12,250 11,000 10,000
45
(24.0) (40.3) (50.1) (56.5) (61.5) (65.0) (68.2) (70.8)
14,750 15,050 14,200 12,500 11,450 10,350 9400
50
(32.4) (44.7) (52.1) (58.0) (62.0) (65.8) (68.4)
*11,400 12,650 12,900 11,650 10,650 9700 8500
55
(22.2) (38.7) (47.6) (54.4) (59.2) (63.2) (65.9)
10,750 11,000 10,900 10,000 9100 7600
60
(32.5) (42.8) (50.5) (56.0) (60.4) (63.3)
9250 9500 9750 9400 8550 6750
65
(23.9) (37.4) (46.8) (52.6) (57.5) (60.6)
*4200 8200 8400 8600 8100 6050
70
(9.2) (31.3) (42.3) (48.9) (54.5) (57.9)
7050 7250 7450 7600 5450
75
(23.8) (37.3) (45.0) (51.3) (55.0)
*4000 6300 6500 6600 4900
80
(12.6) (31.7) (40.7) (47.8) (52.1)
5450 5650 5750 4400
85
(25.0) (36.0) (44.1) (49.0)
*3500 4900 5000 3900
90
(15.3) (30.7) (40.1) (45.7)
4250 4350 3450
95
(24.2) (35.7) (42.2)
*2500 3750 3050
100
(14.9) (30.8) (38.4)
3250 2750
105
(24.9) (34.3)
*2100 2400
110
(16.8) (29.6)
1650
115
(23.7)
850
120
(15.8)
Minimum boom angle (°) for indicated length (no load) 0 5 8 10
Maximum boom le ngth (ft ) at 0° boom angle (no load) 97
NOTE: ( ) Boom angles are in degrees.
*Loads are structurally limited.
#LMI operating code. Refer to LMI manual for operating instructions.
Lifting capacities at zero degree boom angle

Boom Main boom length in feet


angle 31.7 43-A 54-B 64-C 75-D 86-E
11,750 6800 4250 3200 1750 750

(27.5) (38.8) (19.8) (59.8) (70.8) (81.8)
NOTE: ( ) Reference radii in feet. 80034329

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
56 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
FIXED AND 26 FT. - 45 FT. TELE OFFSETTABLE BOOM EXTENSION
Load chart
WITH 6000 lb COUNTERWEIGHT
NBT55: Extension information, 360°, outriggers fully extended, 6000 lb counterweight
ON OUTRIGGERS FULLY EXTENDED - 360°

Boom extension capacity notes:


**26 ft LENGTH 45 ft LENGTH
Radius 1. All capacities above the bold line are based on
in #0005 #0007 #0009 #0011 structural strength limitations.
feet 0° 30° 0° 30°
OFFSET OFFSET OFFSET OFFSET 2. 26 ft and 45 ft extension lengths may be used for single
line lifting service.
6000
50
(72.6) 3. Radii listed are for a fully extended boom with the
5800 boom extension erected. For main boom lengths less
55 than fully extended, the rated loads are determined by
(70.8)
boom angle. Use only the column which corresponds
5500
60 to the boom extension length and offset for which the
(69.0) machine is configured. For boom angles not shown,
5200 4900 4050 use the rating of the next lower boom angle.
65
(67.0) (72.1) (70.4)
Warning: Operation of this machine with heavier
4850 4650 4000
70 loads than the capacities listed is strictly prohibited.
(65.0) (69.9) (68.8)
Machine tipping with boom extension occurs rapidly
4500 4400 3950 2800 and without advance warning.
75
(62.9) (67.7) (67.2) (73.8)
4250 4150 3900 2700 4. Boom angle is the angle above or below horizontal of
80 the longitudinal axis of the boom base section after
(60.8) (65.4) (65.6) (71.9)
lifting rated load.
3950 4000 3800 2650
85
(58.6) (63.1) (63.9) (70.0) 5. Capacities listed are with outriggers properly extended
3800 3800 3550 2600 and vertical jacks set only.
90
(56.4) (60.7) (62.0) (68.0)
3650 3650 3250 2550
95
(54.1) (58.3) (59.9) (66.0)
3150 3350 3000 2500
100
(51.5) (55.6) (57.8) (63.9)
2600 2900 2700 2450
105
(48.6) (52.6) (55.6) (61.8)
2100 2550 2500 2400
110
(45.7) (49.6) (53.5) (59.5)
1700 2100 2300 2350
115
(42.6) (46.3) (51.2) (57.2)
1350 *1650 2050 2300
120
(39.4) (42.8) (48.7) (54.7)
950 *1200 1750 2250
125
(35.9) (39.0) (46.1) (52.1)
650 *850 1500 2000
130
(32.1) (34.8) (43.4) (49.1)
*450 1200 1600
135
(30.0) (40.4) (45.7)
900 1250
140
(37.3) (42.2)
650 *900
145
(33.9) (38.3)
*600
150
(33.9)
Min. boom angle
for indicated length 29° 30° 30° 31°
(no load)
Max. boom length
at 0° boom angle 64 ft 64 ft
(no load)
NOTE: ( ) Boom angles are in degrees. 80034336
#LMI operating code. Refer to LMI manual for instructions.
*Loads are structurally limited.
**26 ft capacities are applicable to both 26' fixed and 26' tele
extension.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Series NBT50 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 57
Load chart
XED AND 26 FT. - 45 FT. TELE OFFSETTABLE BOOM EXTENSION
WITH 6000 lb COUNTERWEIGHT
NBT55: Extension information, over rear, outriggers fully extended, 6000 lb counterweight
ON OUTRIGGERS FULLY EXTENDED - OVER REAR

Boom extension capacity notes:


**26 ft LENGTH 45 ft LENGTH 1. All capacities above the bold line are based on
Radius
in #0006 #0008 #0010 #0012 structural strength limitations.
feet 0° 30° 0° 30°
OFFSET OFFSET OFFSET OFFSET 2. 26 ft and 45 ft extension lengths may be used for single
line lifting service.
6000
50
(72.6) 3. Radii listed are for a fully extended boom with the
5800 boom extension erected. For main boom lengths less
55 than fully extended, the rated loads are determined by
(70.8)
boom angle. Use only the column which corresponds
5500
60 to the boom extension length and offset for which the
(69.0)
machine is configured. For boom angles not shown,
5200 4900 4050 use the rating of the next lower boom angle.
65
(67.0) (72.1) (70.4)
4850 4650 4000 Warning: Operation of this machine with heavier
70 loads than the capacities listed is strictly prohibited.
(65.0) (69.9) (68.8)
Machine tipping with boom extension occurs rapidly
4500 4400 3950 2800 and without advance warning.
75
(62.9) (67.7) (67.2) (73.8)
4250 4150 3900 2700 4. Boom angle is the angle above or below horizontal of
80 the longitudinal axis of the boom base section after
(60.8) (65.4) (65.6) (71.9)
lifting rated load.
3950 4000 3800 2650
85
(58.6) (63.1) (63.9) (70.0)
5. Capacities listed are with outriggers properly extended
3800 3800 3550 2600 and vertical jacks set only.
90
(56.4) (60.7) (62.0) (68.0)
3650 3650 3250 2550
95
(54.1) (58.3) (59.9) (66.0)
3150 3350 3000 2500
100
(51.5) (55.6) (57.8) (63.9)
2600 2900 2700 2450
105
(48.6) (52.6) (55.6) (61.8)
2100 2550 2500 2400
110
(45.7) (49.6) (53.5) (59.5)
1700 2150 2300 2350
115
(42.6) (46.3) (51.2) (57.2)
1350 1650 2050 2300
120
(39.4) (42.8) (48.7) (54.7)
950 1200 1750 2250
125
(35.9) (39.0) (46.1) (52.1)
650 850 1500 2200
130
(32.1) (34.8) (43.4) (49.3)
450 1200 1750
135
(30.0) (40.4) (45.9)
900 1350
140
(37.3) (42.3)
650 900
145
(33.9) (38.3)
600
150
(33.9)
Min. boom angle
for indicated length 29° 30° 30° 31°
(no load)
Max. boom length
at 0° boom angle 64 ft 64 ft
(no load)
NOTE: ( ) Boom angles are in degrees. 80034337
#LMI operating code. Refer to LMI manual for instructions.
**26 ft capacities are applicable to both 26' fixed and 26' tele
extension.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
58 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Accessories
Radio Remote Controls – • NB6R
Eliminate the handling and maintenance concerns that accompany cabled
remotes. Operate to a range of about 76 m (250 ft), varying with conditions.
Remote transmitter displays LMI information on LCD screen.

Personnel Baskets –
One and two person baskets, gravity hung with swing lock and full body
• BSA-1
harness. Fast attachment and secure locking systems. Ratings from 181 kg
• BSA-R1
(400 lb) to 544 kg (1200 lb)
• BSAY-1
• BSAY-2

Auxiliary Winch –
Second winch redundant to the main, 15,000 lb gear set, two-speed piston motor, • AW
cable packer, grooved drum, DRI/LLI standard with 5/8 in Dyform 34LR wire rope

Spanish-Language Danger Decals, • SDD


Control Knobs, and Operators’ Manuals • SOM

Rotation Bearing Lock •MRL


Manual applied lock on rotation bearing (360° positioning)

Metric Capacity Charts •MCC

Dual-Axis Electronic Joysticks •DAJS


In place of single-axis joysticks

Special Paint •SPECIAL PAINT


One color in lieu of standard paint color-non metallic

Auxiliary access step •AAS

Series NBT50 59
Manitowoc Cranes

Regional headquarters
Americas Europe, Middle East, Africa China Greater Asia-Pacific
Manitowoc, Wisconsin, USA Ecully, France Shanghai, China Singapore
Tel: +1 920 684 6621 Tel: +33 (0)4 72 18 20 20 Tel: +86 21 6457 0066 Tel: +65 6264 1188
Fax: +1 920 683 6277 Fax: +33 (0)4 72 18 20 00 Fax: +86 21 6457 4955 Fax: +65 6862 4040
Shady Grove, Pennsylvania, USA
Tel: +1 717 597 8121
Fax: +1 717 597 4062

Regional offices
Americas
Brazil
China
Beijing
Factories This document is non-contractual. Constant improvement and engineering progress
make it necessary that we reserve the right to make specification, equipment, and
Brazil price changes without notice. Illustrations shown may include optional equipment
Alphaville Chengdu and accessories and may not include all standard equipment.
Passo Fundo
Mexico Guangzhou
China
Monterrey Xian
TaiAn
Chile
Zhangjiagang
Santiago Greater Asia-Pacific
France
Australia
Charlieu
Europe, Middle East, Brisbane
Moulins
Africa Melbourne
Germany
Czech Republic Sydney
Wilhelmshaven
Netvorice India
India
France Chennai
Pune
Baudemont Delhi
Italy
Cergy Hyderabad
Niella Tanaro
Decines Pune
Portugal
Germany Korea
Baltar
Langenfeld Seoul
Fânzeres
Hungary Philippines
Slovakia
Budapest Makati City
Saris
Italy Singapore
USA
Lainate
Manitowoc
Netherlands
Port Washington
Breda
Shady Grove
Poland
Warsaw
Portugal
Baltar
Russia
Moscow
South Africa
Johannesburg
U.A.E.
Dubai
U.K.
Buckingham

©2012 Manitowoc
Form No.Series NBT50 PG
Part No. 09-009 / 0512 / 2M www.manitowoc.com

You might also like