Professional Documents
Culture Documents
Section : J-1st_Sem 2022 Course : JECA Joint Entrance Exam MCA (WB JECA)
Twisted Pair Cable A combination of Fibre cable and Coaxial cable Coaxial cable Fibre cable
2. If there are n signal sources of same data rate, then the TDM link has _______ slots. Marks: 2
Time Remaining
n 2n
n/2 n*2 01h : 57m : 56s
3. If an Optical Carrier is represented as OC-n, generally the link speed equals(in Mbps) __________ Marks: 2
5. What is the max data transfer rate for optical fiber cable? Marks: 1
8. To deliver a message to the correct application program running on a host, the _______ address must be consulted. Marks: 1
9. HTTP client requests by establishing a __________ connection to a particular port on the server. Marks: 1
user datagram protocol transmission control protocol border gateway protocol domain host control protocol
optical service implementation operating system interface open service Internet open system interconnection
Very hard to tap Very less signal attenuation Immune electromagnetic interference All of the mentioned
15. In a network, If P is the only packet being transmitted and there was no earlier transmission, which of the following delays could be zero? Marks: 1
16. An endpoint of an inter-process communication flow across a computer network is called __________ Marks: 1
This Site Maintained by Webtech Services
pipe socket port machine
17. In Active mode FTP, the client initiates both the control and data connections. Marks: 1
18. The values GET, POST, HEAD etc are specified in ____________ of HTTP message Marks: 1
19. The number of layers in ISO OSI reference model is __________ Marks: 1
5 10 6 7
only destination address a short VC number only source address full source and destination address
23. Application developer has permission to decide the following on transport layer side Marks: 1
Both Transport layer protocol and Maximum buffer size Maximum buffer size None of the mentioned Transport layer protocol
service oriented architecture client server architecture connection oriented architecture data centric architecture
25. When displaying a web page, the application layer uses the _____________ Marks: 1
26. The commands, from client to server, and replies, from server to client, are sent across the control connection in ________ bit ASCII format. Marks: 1
3 5 8 7
27. Which of the following computer networks is built on the top of another network? Marks: 1
28. Which one of the following allows a user at one site to establish a connection to another site and then pass keystrokes from local host to remote host? Marks: 1
29. If link transmits 4000frames per second, and each slot has 8 bits, the transmission rate of circuit this TDM is _________ Marks: 2
30. Which one of the following is not an application layer protocol? Marks: 1
media gateway protocol dynamic host configuration protocol resource reservation protocol session initiation protocol
31. Which of the following statements is not applicable for cable internet access? Marks: 1
Cable modem connects home PC to Ethernet port It includes HFCs Analog signal is converted to digital signal in DSLAM It is a shared broadcast medium
34. Which of the following architecture uses the CSMA/CD access method? Marks: 1
This Site Maintained by Webtech Services
Router STP server ARC net Ethernet
35. In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ Marks: 1
36. A list of protocols used by a system, one protocol per layer, is called ________ Marks: 1
37. If there are N routers from source to destination, the total end to end delay in sending packet P(L-> number of bits in the packet R-> transmission rate) is equal to ______________ Marks: 2
38. Which layer is responsible for process to process delivery in a general network model? Marks: 1
Time Remaining
01h : 57m : 56s
transport layer network layer session layer data link layer
40. What is the max length of the Shielded twisted pair cable? Marks: 1
41. The packet of information at the application layer is called __________ Marks: 1
dnodal = dproc + dqueue - dtrans - dprop dnodal = dproc + dtrans - dqueue dnodal = dproc - dqueue + dtrans + dprop dnodal = dproc + dqueue + dtrans + dprop
A high-speed downstream channel A low-speed downstream channel A medium-speed downstream channel An ultra-high speed downstream channel
Fine Transfer Protocol First Transfer Protocol File Transfer Protocol Fast Transfer Protocol
Distance between the routers Transmission rate Packet length Speed of the CPU
46. Transport layer aggregates data from different applications into a single stream before passing it to ____________ Marks: 1
47. The HTTP response message leaves out the requested object when ____________ method is used Marks: 1
HFC Twisted pair cable Optical cable High speed fibre cable
50. Terrestrial radio channels are broadly classifed into _____ groups. Marks: 1
2 4 1 3
52. Marks: 1
SELECT *
FROM instructor
To display the salary from greater to smaller and name in ascending order which of the following options should be used?
53. Which of the following should be used to find all the courses taught in the Fall 2009 semester but not in the Spring 2010 semester . Marks: 2
Time Remaining
01h : 57m : 56s
SELECT DISTINCT course id
SELECT COUNT (DISTINCT ID)
FROM SECTION
FROM takes (SELECT course id SELECT DISTINCT course_id
WHERE semester = ’Fall’ AND YEAR= 2009 AND
WHERE (course id, sec id, semester, YEAR) IN (SELECT course id, sec id, semester, YEAR FROM SECTION FROM instructor
course id NOT IN (SELECT course id
FROM teaches WHERE semester = ’Spring’ AND YEAR= 2010) WHERE name NOT IN (’Fall’, ’Spring’);
FROM SECTION
WHERE teaches.ID= 10101);
WHERE semester = ’Spring’ AND YEAR= 2010);
54. A _____ indicates an absent value that may exist but be unknown or that may not exist at all. Marks: 2
5 4 2 3
56. The____condition allows a general predicate over the relations being joined. Marks: 1
58. The ___________ operation, denoted by ?, allows us to find tuples that are in one relation but are not in another. Marks: 1
60. The basic data type char(n) is a _____ length character string and varchar(n) is _____ length character. Marks: 1
61. Which of the following statements creates a new table temp instructor that has the same schema as an instructor. Marks: 1
Create table like temp_instructor; Create table temp_instructor like instructor; Create Table as temp_instructor; create table temp_instructor;
Conforming an action or triggering a response Recording a business activity Producing detail summary or exception report Maintaining a data
63. Which of the following is used to get back all the transactions back after rollback? Marks: 1
64. The result which operation contains all pairs of tuples from the two relations, regardless of whether their attribute values match. Marks: 1
65. The ________ keyword is used to access attributes of preceding tables or subqueries in the from clause. Marks: 2
66. Marks: 1
67. The operation which is not considered a basic operation of relational algebra is Marks: 1
Time Remaining
Selection Union Join Cross product 01h : 57m : 56s
68. _____ clause is an additional filter that is applied to the result. Marks: 1
69. _____________ express the number of entities to which another entity can be associated via a relationship set. Marks: 1
70. Marks: 1
72. An entity set that does not have sufficient attributes to form a primary key is termed a __________ Marks: 1
Strong entity set Weak entity set Variant set Variable set
73. SQL view is said to be updatable (that is, inserts, updates or deletes can be applied on the view) if which of the following conditions are satisfied by the query defining the view? Marks: 1
The select clause contains only attribute names of the relation and does not have any expressions,
All of the mentioned The from clause has only one database relation The query does not have a group by or having clause
aggregates, or distinct specification
If we insert tuple into the view as insert into instructor info values (’69987’, ’White’, ’Taylor’);
What will be the values of the other attributes in instructor and department relations?
76. What type of join is needed when you wish to include rows that do not have matching values? Marks: 1
77. Database __________ which is the logical design of the database, and the database _______ which is a snapshot of the data in the database at a given instant in time. Marks: 1
78. The ____ connective tests for set membership, where the set is a collection of values produced by a select clause. The ____ connective tests for the absence of set membership. Marks: 2
Time Remaining
01h : 57m : 56s
In, or Or, in In, not in Not in, in
80. Marks: 1
Here which one denotes the relation for which index is created?
Improve the quality of data entered for a specific property Ensure that duplicate records are not entered into the Prevent users from changing the values stored in the
Control who is allowed access to the data
(i.e., table column) table table
83. Which one of the following is a set of one or more attributes taken collectively to uniquely identify a record? Marks: 1
Relational algebra Tuple relational calculus Query language Domain relational calculus
86. The ________ clause is used to list the attributes desired in the result of a query. Marks: 1
87. Which of the following symbol is used in the place of except? Marks: 2
V ~ ¬ ^
88. How can you find rows that do not match some specified condition? Marks: 2
NOT EXISTS None of the mentioned EXISTS Double use of NOT EXISTS
89. A domain is atomic if elements of the domain are considered to be ____________ units. Marks: 1
90. Which of the join operations do not preserve non matched tuples? Marks: 1
Left outer join Inner join Right outer join Natural join
92. The descriptive property possessed by each entity set is _________ Marks: 1
93. Marks: 1
FROM instructor;
Time Remaining
Find the error in this query. 01h : 57m : 56s
Select Instructor View …as None of the mentioned
94. The attribute AGE is calculated from DATE_OF_BIRTH. The attribute AGE is Marks: 1
95. Marks: 1
In order to ensure that an instructor’s salary domain allows only values greater than a specified value use:
96. Aggregate functions can be used in the select list or the_______clause of a select statement or subquery. They cannot be used in a ______ clause. Marks: 2
Group by, having Group by, where Where, having Having, where
98. Which one of the following provides the ability to query information from the database and to insert tuples into, delete tuples from, and modify tuples in the database? Marks: 1
99. Marks: 1
Submit Cancel