This document provides information about making duck eye connections for wiring. It explains that duck eye connections are used to connect conductor wires to components like fittings by rounding the copper wire with pliers so it wraps securely around a screw. The process of making a duck eye involves measuring bolt diameters, peeling cable ends, bending the cable at 90 degrees, forming it into a circular shape with pliers, checking fit, and installing according to drawings. Tools needed include pliers, bolts, cable, and rulers. The process takes up to 2 days to complete at a wiring bench.
This document provides information about making duck eye connections for wiring. It explains that duck eye connections are used to connect conductor wires to components like fittings by rounding the copper wire with pliers so it wraps securely around a screw. The process of making a duck eye involves measuring bolt diameters, peeling cable ends, bending the cable at 90 degrees, forming it into a circular shape with pliers, checking fit, and installing according to drawings. Tools needed include pliers, bolts, cable, and rulers. The process takes up to 2 days to complete at a wiring bench.
This document provides information about making duck eye connections for wiring. It explains that duck eye connections are used to connect conductor wires to components like fittings by rounding the copper wire with pliers so it wraps securely around a screw. The process of making a duck eye involves measuring bolt diameters, peeling cable ends, bending the cable at 90 degrees, forming it into a circular shape with pliers, checking fit, and installing according to drawings. Tools needed include pliers, bolts, cable, and rulers. The process takes up to 2 days to complete at a wiring bench.
explains the working practices of duck eye benches
A duck-eye connection is a connection used to connect a conductor wire to other components, for example fittings. Making this connection eye is done using rounding pliers.This duck-eye connection is usually used to attach single-core cables to busbars. The copper wire is made rounded so that when tightened with a screw it will be strong, because it wraps around the entire screw. tools and materials for making duck eyes : pliers, combination pliers, bolts and screws, HIS cable, cutting pliers, round pliers, screwdriver plus and min, angle ruler.
Explain how the process works
The processing time for making duck eyes in bench work practice is only up to 2 days, and each bench is given paper instructions on how to make duck eyes, so that there is no difficulty when doing it. The following are the working steps for making duck eyes : 1. Measure the diameter of the bolt or bolt terminal 2. The diameter of the eye of the duck is larger than the diameter of the bolt terminal 3. Peel the end of the cable to a size 5 times the diameter of the bolt and increase the length to a tolerance of ±1.5mm 4. The end of the wire that has been peeled, bent 900 to the left, then formed into a duck's eye with rounding pliers, rotated clockwise 5. Check whether the duck eye shape you made is round/circular at the end of the stripped cable 6. If it is round like a cable eye, check whether the connection you made fits 7. If it is correct, install the eye connection that has been made on the terminal according to the work drawing 8. Make duck eyes from cable sizes 1.5mm to 6mm 9. Make the shape of the cable arch according to the working drawings sequentially from exercise 1 to exercise 2 and exercise 3