Professional Documents
Culture Documents
(I) Origin and evolution of earth, interior of earth, Wegner's Continental Drift Theory; Plate
tectonics.Volcanoes, Earthquakes and Tsunamis
(ii)Major types of rocks and their characteristics, evolution and characteristics of landforms in the
Fluvial, Glacial, Arid and Karst regions
(iii) Geomorphic processes; Weathering, mass wasting, erosion and deposition,soil formation,Landscape
cycles, ideas of Davis and Penck
(iv)Composition, Structure and Stratification of the atmosphere
(v) Insolation,heat budget of the earth.
(vi) Horizontal and vertical distribution of temperature, inversion of temperature.
(vii) Air masses and fronts. Tropical and temperate cyclones.
(viii) Evaporation and Condensation: dew, frost, fog, mist and cloud, rainfall types.
(ix)Classification of climates, (Koppen and Thornthwaite), Greenhouse effect, global warming and
climatic changes
(x) Hydrological cycle, distribution of temperature and solicits in the oceans and seas, waves,tides and
currents, ocean floor relief features,
(xi) Structure, relief and physiographic divisions.Drainage Systems Himalayan and the Peninsular.
(xii)Indian monsoon, mechanism, onset and retreat, climatic types (Koppen and Trcwartha).Green
Revolution and its impact on major crops of India. Food scarcity
(xlll) Natural Vegetation-Forest types and distribution, wild life, conservation, biosphere reserves.
(xiv)Major types of Soils.(ICAR classification) and their distribution. Soil degradation and conservation
(xv) Natural Hazards : Floods, Droughts, Cyclones, Landslides,
(xvi) Population growth, distribution and density
(xvii)Age: Sex, ratio, rural-urban composition;
(xviii)Population, environment and development
(xix)Types of Settlements : rural and urban. Urban morphology; functional classification of urban
settlements Problems of human settlement in India.
(C) Natural Resources of India; Development and Utilization Land Resources ie General land use,
agricultural land use,
(xx) geographical condition and distribution of major crops, like,Rice, Wheat,Cotton, Jute, Sugarcane,
Rubber, Tea and Coffee,
(xxi) Water Resources : Availability and utilization for industrial and other purposes, irrigation, scarcity of
water, methods of conservation-rain water harvesting and watershed management, ground water
management.
(xxii)Minerals and Energy Resources : Distribution and utility of [a] metallic minerals (ion ore, copper,
bauxite, manganese), (b) non- metallic and conventional minerals [coal,petroleum and natural gas), (c)
Page 1
CrackJPSC Mains Paper III Module B (Geography)
hydro electricity and non conventional sources of energy (Solar, Wind, bio-gas),(d) energy sources Their
distribution and conservation.
(xxiii) Development of Industries : Types of Industries;factors of industrial location, distribution and
changing pattern of selected industries [iron and steel, cotton textile, sugar and petro- chemicals);
Weber's theory of industrial location-lts relevance in the modern world.
(xxiv) Transport, Communication and International Trade : Roads, railways and water ways. Bases of
International trade, changing pattern of India's ' foreign trade.
(xxv) Geological history,landforms, drainage, climate, soil types and forests; agriculture and
irrigation,Damodar & Suberna rekha valley projects; mineral resources of Jharkhand,their extraction and
utilization,
(xxvi)Population : Growth, distribution, density; Tribal population and their distribution.Problems of
Tribes and Tribal development Plans; their customs,rituals,festivals etc
(xxvii)Industrial and urban development. Major industries-Iron, Steel and Cement; industries,
(xxviiI)Pattern of urban settlement and Pollution Problems
Page 2
CrackJPSC Mains Paper III Module B (Geography)
Page 3
CrackJPSC Mains Paper III Module B (Geography)
Interior of earth,
Page 4
CrackJPSC Mains Paper III Module B (Geography)
Page 5
CrackJPSC Mains Paper III Module B (Geography)
Page 6
CrackJPSC Mains Paper III Module B (Geography)
Page 7
CrackJPSC Mains Paper III Module B (Geography)
Plate tectonics
The uppermost outer solid and rigid as lithosphere. Mantle is partially
layer of the earth is called crust. Its molten between 100 to 250 km depth.
thickness varies considerably. It is as This zone is said to be asthenosphere,
little as 5 km thick beneath the oceans at also known as Mohr discontinuity, a
some places but under some mountain simplification of Mohorovicic, the name
ranges it extends upto a depth of of the seismologist who discovered it.
700km. Below the crust denser rocks are The lithosphere is broken into several
found, known as mantle crust. This blocks. These blocks are known as
upper part of mantle upto an average plates, which are moving over
depth of 100 km from the surface is asthenosphere. There are seven major
solid. This solid mantle plus upper crust plates.
form a comparatively rigid block termed
Page 8
CrackJPSC Mains Paper III Module B (Geography)
The plate boundaries can be identified Because the oceanic ridges are areas of
because they are zones along which young crust, there is very little sediment
earthquakes occur.Plate interiors have accumulation on the ridges. Sediment
much fewer earthquakes. thickness increases in both directions
away of the ridge, and is thickest where
There are three types of plate the oceanic crust is the oldest. Knowing
boundaries: the age of the crust and the distance
from the ridge, the relative velocity of
1. Divergent Plate boundaries, the plates can be determined.
where plates move away from
each other. Relative plate velocities vary both for
2. Convergent Plate Boundaries, individual plates and for different plates.
where plates move toward each
other. Sea floor topography is controlled by the
3. Transform Plate Boundaries, age of the oceanic lithosphere and the
where plates slide past one rate of spreading.
another.
If the spreading rate (relative velocity) is
Divergent Plate Boundaries high, magma must be rising rapidly and
the lithosphere is relatively hot beneath
These are oceanic ridges where new the ridge. Thus for fast spreading
oceanic lithosphere is created by centers the ridge stands at higher
upwelling mantle that melts, resulting in elevations than for slow spreading
basaltic magmas which intrude and centers. The rift valley at fast spreading
erupt at the oceanic ridge to create new centers is narrower than at slow
oceanic lithosphere and crust. As new spreading centers. As oceanic
oceanic lithosphere is created, it is lithosphere moves away from the ridge,
pushed aside in opposite directions. it cools and sinks deeper into the
Thus, the age of the oceanic crust asthenosphere. Thus, the depth to the
becomes progressively older in both sea floor increases with increasing age
directions away from the ridge. away from the ridge.
Page 9
CrackJPSC Mains Paper III Module B (Geography)
Zone, a zone of earthquakes located velocity than other parts One of the
along the subduction zone, identifies a largest such transform boundaries
subduction zone. The earthquakes may occurs along the boundary of the North
extend down to depths of 700 km before American and Pacific plates and is
the subducting plate heats up and loses known as the San Andreas Fault. Here
its ability to deform in a brittle fashion. the transform fault cuts through
continental lithosphere
As the oceanic plate subducts, it begins
to heat up causing the release water of Triple Junctions occur at points where
water into the overlying mantle thee plates meet.
asthenosphere. The water reduces the
melting temperature and results in the Hot Spots
production of magmas. These magmas
rise to the surface and create a volcanic Areas where rising plumes of hot mantle
arc parallel to the trench. If the reach the surface, usually at locations far
subduction occurs beneath oceanic removed from plate boundaries are
lithosphere, an island arc is produced at called hot spots. Because plates move
the surface (such as the Japanese relative to the underlying mantle, hot
islands, the Aleutian Islands, the spots beneath oceanic lithosphere
Philippine islands, or the Caribbean produce a chain of volcanoes. A volcano
islands is active while it is over the vicinity of
the hot spot, but eventually plate motion
Transform Plate Boundaries results in the volcano moving away from
the plume and the volcano becomes
Where lithospheric plates slide past one extinct and begins to erode.
another in a horizontal manner, a
transform fault is created. Earthquakes Because the Pacific Plate is one of the
along such transform faults are shallow faster moving plates, this type of
focus earthquakes. volcanism produces linear chains of
islands and seamounts, such as the
Most transform faults occur where
oceanic ridges are offset on the sea floor. Hawaiian - Emperor chain, the
Such offset occurs because spreading Line
takes place on the spherical surface of Islands, the Marshall-Ellice
the Earth, and some parts of a plate Islands,
must be moving at a higher relative and the Austral seamount chain
Page 10
CrackJPSC Mains Paper III Module B (Geography)
Volcanoes
Volcano is a place on the earth’s surface blown into the air and break into small
(or any other planet) where molten rock fragments that fall around the opening
and gases are erupted. or hill or of the volcano. The pile forms an oval-
mountain built up by the eruption of shaped smallvolcano.
molten rock.Volcanic eruptions are
caused by magma (a mixture of liquid Shield volcanoes
rock, crystals, and dissolved gas) Shield volcanoes are the largest
expelled onto the Earth's surface. volcanoes. They have gentle, almost
straight slopes and a wide, circular
Basaltic magmas tend to be fairly fluid base.These volcanoes form when thin,
(low viscosity), Rhyolitic magmas tend running lava flows over a large area.
to have even higher viscosity,Viscosity is Each time the volcano quietly erupts,
an important property in determining thelayers of cooled lava build up.The
the eruptive behavior of magmas. lava that forms shield volcanoes
contains a large volume of basalt. It has
Fissure Volcano a very low viscosity. Basaltic
Fissure volcanoes have no central crater lavacontains few gases, resulting in
at all. Instead,giant cracks open in the quiet, flowing eruptions. Mauna Loa, in
ground and expel vast quantitiesof lava. Hawaii, is an example of a shield
This lava spreads far and wide to form volcano.
huge poolsthat can cover almost
everything around. Whenthese pools of Composite volcano.
lava cool and solidify, the A violent eruption occurs, forcing
surfaceremains mostly flat. Since the cinders and ash fromthe vent. This
source cracksare usually buried, there is material settles around the vent, much
often nothing"volcano-like" to see - only like a cinder-cone volcano. This event is
a flat plain. followed by a quieteruption. The lava
Cinder cones flows over the cinders. It eventually
Cinder cones are simple volcanoes cools and hardens. After many of these
which have a bowl-shaped crater at the alternatingeruptions, a tall cone-shaped
summit and steep sides. They only grow mountain forms.
to about a thousand feet, the size of a The lava that forms composite volcanoes
hill. They usually are created of also has a low viscosity. It contains large
eruptions from a single opening, unlike amounts of silica, water, andgases.
a strato-volcano or shield volcano which These violent volcanoes can be very
can erupt from many different openings. dangerous. Mount Etna, in Italy, and
Cinder cones are typically are made of Mount Saint Helens, in the
piles of lava, not ash. During the UnitedStates, are two examples of
eruption, blobs ("cinders") of lava are composite volcanoes.
Page 11
CrackJPSC Mains Paper III Module B (Geography)
Page 12
CrackJPSC Mains Paper III Module B (Geography)
Earthquakes
Earthquakes occur when energy stored generated by sudden release of stored
in elastically strained rocks is suddenly elastic energy.
released. This release of energy causes
intense ground shaking in the area near The epicenter is the point on the surface
the source of the earthquake and sends of the earth directly above the focus.
waves of elastic energy, called seismic Sometimes the media get these two
waves, throughout the Earth. terms confused.
Earthquakes can be generated by bomb
blasts, volcanic eruptions, sudden Seismic waves are the vibrations from
volume changes in minerals, and sudden earthquakes that travel through the
slippage along faults. Earthquakes are Earth; they are recorded on instruments
definitely a geologic hazard for those called seismographs. Seismographs
living in earthquake prone areas, but the record a zig-zag trace that shows the
seismic waves generated by earthquakes varying amplitude of ground oscillations
are invaluable for studying the interior beneath the instrument. Sensitive
of the Earth. seismographs, which greatly magnify
these ground motions, can detect strong
The point within the earth where the earthquakes from sources anywhere in
fault rupture starts is called the focus or the world. The time, locations, and
hypocenter. This is the exact location magnitude of an earthquake can be
within the earth were seismic waves are determined from the data recorded by
seismograph stations.
Page 13
CrackJPSC Mains Paper III Module B (Geography)
Two of the most common methods used earthquakes that occur beneath the
to measure earthquakes are the Richter oceans may not even be felt by humans.
scale and the moment magnitude scale. Richter Scale of Earthquake Energy
The magnitude of an earthquake is
The Richter scale is used to rate the determined using information gathered
magnitude of an earthquake, that is the by a seismograph.
amount of energy released during an The Richter magnitude involves
earthquake. measuring the amplitude (height) of the
The Richter scale doesn't measure quake largest recorded wave at a specific
damage (which is done by Mercalli distance from the seismic source.
Scale) which is dependent on a variety of Adjustments are included for the
factors including population at the variation in the distance between the
epicentre, terrain, depth, etc. An various seismographs and the epicentre
earthquake in a densely populated area of the earthquakes.
which results in many deaths and The Richter scale is a base-10
considerable damage may have the same logarithmic scale, meaning that each
magnitude as a shock in a remote area order of magnitude is 10 times more
that does nothing more than frightening intensive than the last one.
the wildlife. Large-magnitude
Tsunamis
A tsunami is a very long-wavelength The rate at which a wave loses its energy
wave of water that is generated by is inversely related to its wavelength.
sudden displacement of the seafloor or Since a tsunami has a very large
disruption of any body of standing wavelength, it will lose little energy as it
water. Tsunami are sometimes called propagates. Thus, in very deep water, a
"seismic sea waves", although they can tsunami will travel at high speeds with
be generated by mechanisms other than little loss of energy.
earthquakes.
Tsunami have also been called "tidal As a tsunami leaves the deep water of
waves", but this term should not be used the open sea and arrives at the shallow
because they are not in any way related waters near the coast, it undergoes a
to the tides of the Earth. Because transformation. Since the velocity of the
tsunami occur suddenly, often without tsunami is also related to the water
warning, they are extremely dangerous depth, as the depth of the water
to coastal communities. decreases, the velocity of the tsunami
decreases. The change of total energy of
Tsunamis can be associated with the tsunami, however, remains constant.
earthquakes. Sometimes a large
earthquake beneath the ocean floor will Furthermore, the period of the wave
produce a tsunami, which is a series of remains the same, and thus more water
large waves. is forced between the wave crests
Page 14
CrackJPSC Mains Paper III Module B (Geography)
causing the height of the wave to the debris acting as projectiles which
increase. Because of this "shoaling" then run into other objects, erosion that
effect, a tsunami that was imperceptible can undermine the foundations of
in deep water may grow to have wave structures built along coastlines, and
heights of several meters or more. fires that result from disruption of gas
and electrical lines. Tertiary effects
The main damage from tsunami comes include loss of crops and water and
from the destructive nature of the waves electrical systems which can lead to
themselves. Secondary effects include famine and disease.
Page 15
CrackJPSC Mains Paper III Module B (Geography)
Page 16
CrackJPSC Mains Paper III Module B (Geography)
Page 17
CrackJPSC Mains Paper III Module B (Geography)
Page 18
CrackJPSC Mains Paper III Module B (Geography)
Page 19
CrackJPSC Mains Paper III Module B (Geography)
At a young stage, The profile of valley is on one side with none on the other or
typically ‘V’ shaped. As the cycle attains one at quite a different elevation on the
maturity, the lateral erosion becomes other side, they are called as unpaired
prominent and the valley floor flattens terraces.
out. The valley profile now becomes
typically ‘U’ shaped with a broad base Depositional Features
and a concave slope.
Alluvial Fans
Potholes, Plunge pools
They are found in the middle course of a
Potholes are more or less circular river at the foot of slope/
depressions over the rocky beds of hills mountains.When the stream moves
streams.Once a small and shallow from the higher level break into foot
depression forms, pebbles and boulders slope plain of low gradient, it loses its
get collected in those depressions and energy needed to transport much of its
get rotated by flowing water. load.Thus, they get dumped and spread
Consequently, the depressions grow in as a broad low to the high cone-shaped
dimensions to form potholes.Plunge deposits called an alluvial fan.
pools are nothing but large, deep
potholes commonly found at the foot of Deltas
a waterfall. They are formed because of
the sheer impact of water and rotation of They are found in the mouth of the river,
boulders. which is the final location of
depositional activity of a river. \The
Incised or Entrenched Meanders coarser material settle out first and the
finer materials like silt and clay are
They are very deep wide meanders carried out into the sea.
(loop-like channels) found cut in hard
rocks.In the course of time, they deepen
and widen to form gorges or canyons in
hard rock.The difference between a Flood Plains, Natural Levees
normal meander and an
incised/entrenched meander is that the Natural levees are found along the banks
latter found on hard rocks. of large rivers. They are low, linear and
parallel ridges of coarse deposits along
River Terraces the banks of a river.The levee deposits
are coarser than the deposits spread by
They are surfaces marking old valley flood water away from the river.
floor or flood plains.They are basically
the result of vertical erosion by the
stream. When the terraces are of the
same elevation on either side of the Meanders and oxbow lakes
river, they are called as paired
terraces.When the terraces are seen only
Page 20
CrackJPSC Mains Paper III Module B (Geography)
They are formed basically because of formed solely through the process of
three reasons: (i) propensity of water solution, it is called as a solution
flowing over very gentle gradient to sink.When several sink holes join
work laterally on the banks; (ii) together to form valley of sinks, they are
unconsolidated nature of alluvial called as blind valleys.
deposits making up the bank with
many irregularities; (iii) Coriolis
force acting on fluid water deflecting
it like deflecting the wind.
The concave bank of a meander is Caves
known as cut-off bank and the
convex bank is known as a slip-off In the areas where there are alternative
As meanders grow into deep loops, beds of rocks (non-soluble) with
the same may get cut-off due to limestone or dolomite in between or in
erosion at the inflection point and areas where limestone are dense,
are left as oxbow lakes. massive and occurring as thick beds,
cave formation is prominent. Caves
Braided Channels normally have an opening through
which cave streams are discharged
When selective deposition of coarser Caves having an opening at both the
materials causes the formation of a ends are called tunnels.
central bar, it diverts the flow of river
towards the banks, which increases
lateral erosion. Similarly, when more
and more such central bars are formed, Stalactites and stalagmites
braided channels are formed. Riverine
Islands are the result of braided
They are formed when the calcium
channels.
carbonates dissolved in groundwater get
deposited once the water
evaporates.These structures are
commonly found in limestone
Karst Topography caves.Stalactites are calcium carbonate
deposits hanging as icicles while
Any limestone, dolomite or gypsum Stalagmites are calcium carbonate
region showing typical landforms deposits which rise up from the
produced by the action of groundwater floor.When a stalactite and stalagmite
through the process of solution and happened to join together, it gives rise
deposition is called as Karst to pillars or columns of different
Topography (Karst region in the diameters.
Balkans).
Sinkholes
Page 21
CrackJPSC Mains Paper III Module B (Geography)
Glacial Valleys/Troughs
Page 22
CrackJPSC Mains Paper III Module B (Geography)
Page 23
CrackJPSC Mains Paper III Module B (Geography)
Many rock-outcrops in the deserts easily dune formation are equally important.
susceptible to wind deflation and There can be a great variety of dune
abrasion are worn out quickly leaving forms Crescent shaped dunes
some remnants of resistant rocks called barchans with the points or
polished beautifully in the shape of wings directed away from wind
mushroom with a slender stalk and a .Parabolic dunes form when sandy
broad and rounded pear shaped cap surfaces are partially covered with
above. Sometimes, the top surface is vegetation. That means parabolic dunes
broad like a table top and quite often, are reversed barchans with wind
the remnants stand out like pedestals. direction being the same.
Page 24
CrackJPSC Mains Paper III Module B (Geography)
Table of content
Weathering
Mass Wasting
Erosion and Deposition
Soil Formation
Landscape (Geological) Cycles
Davis Cycle
Penck Cycle
Weathering
Weathering is the general term applied plutonic rocks form under conditions at
to the combined action of all processes high pressures and temperatures. At the
that cause rock to disintegrate physically Earth's surface they are not as stable as
and decompose chemically because of the conditions under which they formed.
ex- posure near the Earth’s surface In response to the environmental
through the elements of weather. change, they gradually weather
Among these elements temperature, (transform to more stable minerals).
rainfall, frost, fog and ice are the
important ones. Weathering begins as Different types of Weathering are:-
soon as rocks come in contact with one
or more than one elements of weather 1. Physical Weathering :-The mechanical
on the surface of the earth. In nature, breakup or disintegration of rock doesn't
generally both the disintegration and change mineral makeup. It creates
decomposition act together at the broken fragments or “detritus.” which
sametime and assist each other. We are classified by size:
must remember that the weathered
material (i.e. disintegrated and Coarse-grained – Boulders,
decomposed) lie in situ (i.e. at its Cobbles, and Pebbles.
original position). In this process no Medium-grained – Sand
transportation or movement of material Fine-grained – Silt and clay
is involved other than its falling down (mud).
under the force of gravity.
Various process of Physical weathering
Weathering is the response of rocks to a are:-
changing environment. For example,
Page 25
CrackJPSC Mains Paper III Module B (Geography)
Page 26
CrackJPSC Mains Paper III Module B (Geography)
Mass wasting is defined as the down a much more detailed way that reflects
slope movement of rock and regolith the mechanisms responsible for the
near the Earth's surface mainly due to movement and the velocity at which the
the force of gravity. Mass movements movement occurs. Mass wasting can be
are an important part of the erosional classified as:-
process, as it moves material from
higher elevations to lower elevations
where transporting agents like streams
and glaciers can then pick up the Slope Failures - a sudden
material and move it to even lower failure of the slope resulting in
elevations. Mass movement processes transport of debris down hill by
are occurring continuously on all slopes; sliding, rolling, falling, or
some act very slowly, others occur very slumping.
suddenly, often with disastrous results. Sediment Flows - debris flows
Any perceptible down slope movement down hill mixed with water or air.
of rock or regolith is often referred to in
general terms as a landslide.
Landslides, however, can be classified in
Erosion and Deposition
Soil erosion is the deterioration of soil usually does not cause any major
by the physical movement of soil problems. It becomes a problem when
particles from a given site. Wind, water, human activity causes it to occur much
ice, animals, and the use of tools by man faster than under normal conditions.The
are usually the main causes of soil removal of soil at a greater rate than its
erosion. It is a natural process which replacement by natural agencies (water,
Page 27
CrackJPSC Mains Paper III Module B (Geography)
wind etc.) is known as soil erosion. slope, it scoops out the soil and
Soil erosion is of four types which are as forms gullies which gradually
follows:- multiply and in the long run
spread over a wide area. This type
Wind Erosion :-Winds carry of erosion is called gully erosion.
away vast quantity of fine soil The land thus dissected is called
particles and sand from deserts bad lands or ravines. In our
and spread it over adjoining country, the two rivers Chambal
cultivated land and thus destroy and Yamuna are famous for their
their fertility. This type of erosion ravines in U.P. and M.P. states.
is known as wind erosion. It takes
place in and around all desert Deposition / Sedimentation –
regions of the world. In India, occurs when sediment settles out as
over one lakh kilometers of land winds/water current die down, or as
is under Thar Desert, spread over glaciers melt. When sediment is
parts of Gujarat, Haryana, Punjab transported and deposited, it leaves
and Rajasthan states. These areas clues to the mode of transport and
are subject to intense wind deposition. For example, if the mode of
erosion. transport is by sliding down a slope, the
Sheet Erosion :-Water when deposits that result are generally chaotic
moves as a sheet takes away thin in nature, and show a wide variety of
layers of soil. This type of erosion particle sizes. Grain size and the
is called sheet erosion. Such type interrelationship between grains gives
of erosion is most common along the resulting sediment texture. Thus, we
the river beds and areas affected can use the texture of the resulting
by floods. In the long run, the soil deposits to give us clues to the mode of
is com- pletely exhausted due to transport and deposition. Sorting - The
removal of top soil and becomes degree of uniformity of grain size.
infertile. Particles become sorted on the basis of
Rill Erosion :-The removal of density, because of the energy of the
surface material usually soil, by transporting medium. High energy
the action of running water. The currents can carry larger fragments. As
processes create numerous tiny the energy decreases, heavier particles
channels (rills) a few centimeters are deposited and lighter fragments
in depth, most of which carry continue to be transported. This results
water only during storms. in sorting due to density.
Gully Erosion :-When water
moves as a channel down the
Soil Formation
Soil consists of rock and sediment that produce a substrate that can support the
has been modified by physical and growth of plants.Soil is the uppermost
chemical interaction with organic layer of the land surface that plants use
material and rainwater, over time, to
Page 28
CrackJPSC Mains Paper III Module B (Geography)
and depend on for nutrients, water and vegetative cover and more animal
physical support. action. It also means more runoff,
more percolation and more water
Factors of soil formation are:- erosion. They all help to
determine the kind of soils in an
Parent material: soil formation area.
depends on the mineral material, Relief:i.e. the landscape position
or organic material from which and the slopes it has. Steep, long
the soil is formed. Soils will carry slopes mean water will run down
the characteristics of its parent faster and potentially erode the
material such as color, texture, surfaces of slopes. The effect will
structure, mineral composition be poor soils on the slopes, and
and so on. For example, if soils richer deposits at the foot of the
are formed from an area with slopes. Also, slopes may be
large rocks (parent rocks) of red exposed to more direct sunlight,
sandstone, the soils will also be which may dry out soil moisture
red in color and have the same and render it less fertile.
feel as its parent material. Organisms:The source and
Time: Soils can take many years richness of organic matter is
to form. Younger soils have some down to the living things (plants
characteristics from their parent and animals) that live on and in
material, but as they age, the the soils. Plants in particular,
addition of organic matter, provide lots of vegetative residue
exposure to moisture and other that are added to soils. Their
environmental factors may roots also hold the soils and
change its features. With time, protect them from wind and
they settle and are buried deeper water erosion. They shelter the
below the surface, taking time to soils from the sun and other
transform. Eventually they may environmental conditions,
change from one soil type to helping the soils to retain the
another. needed moisture for chemical and
Climate:Two important climatic biological reactions. Fungi,
components, temperature and bacteria, insects, earthworms,
precipitation are key. They and burrowing animals help with
determine how quickly soil aeration. Worms help
weathering will be, and what kind breakdown organic matter and
of organic materials may be aid decomposition. Animal
available on and inside of the droppings, dead insects and
soils. Moisture determines the animals result in more decaying
chemical and biological reactions organic matter. Microorganisms
that will occur as the soils are also help with mineral and
formed. Warmer climate with nutrient cycling and chemical
more rainfall means more reactions.
Page 29
CrackJPSC Mains Paper III Module B (Geography)
Davis Cycle
Page 30
CrackJPSC Mains Paper III Module B (Geography)
stage by the followers of Davis). These Process means the agent of denudation
three factors are called as ‘Trio of Davis’. including both, weathering and erosion
(running water in the case of
Structure :means lithological (rock geographical cycle).
types) and structural characteristics
(folding, faulting, joints etc.) of rocks. Process:Implies the factors or agents
Time was not only used in temporal responsible for weathering and erosion.
context but it was also used as a process
itself leading to an inevitable Time:Implies the stage at which the
progression of change of landform. cycle is—youth, maturity or old age.
Penck Cycle
Page 31
CrackJPSC Mains Paper III Module B (Geography)
Page 32
CrackJPSC Mains Paper III Module B (Geography)
Nitrogen N2 78%
Oxygen O2 20.9%
Argon Ar 9.34%
Carbon dioxide CO2 3.84 %
Neon
Helium
Methane
Page 33
CrackJPSC Mains Paper III Module B (Geography)
Page 34
CrackJPSC Mains Paper III Module B (Geography)
Page 35
CrackJPSC Mains Paper III Module B (Geography)
small size of the earth and its distance day. Other conditions remaining the
from the sun. Moreover water vapour, same, the longer the days the greater is
dust particles, ozone and other gases the amount of insolation. In summers,
present in the atmosphere absorb a the days being longer the amount of
small amount of insolation. insolation received is also more. As
against this in winter the days are
The amount of insolation received on shorter the insolation received is also
the earth’s surface is not uniform less. On account of the inclination of the
everywhere. It varies from place to place earth on its axis at an angle of 23 ½ ,
and from time to time. The tropical zone rotation and revolution, the duration of
receive the maximum annual insolation. the day is not same everywhere on the
It gradually decreases towards the poles. earth. At the equator there is 12 hours
Insolation is more in summers and less day and night each throughout the year.
in winters. As one moves towards poles duration of
The following factors influence the the days keeps on increasing or
amount of insolation received. decreasing. It is why the maximum
(i) The angle of incidence:-The angle insolation is received in equatorial
formed by the sun’s ray with the tangent areas.
of the earth’s circle at a point is called
angle of incidence. It influences the (iii) Transparency of the
insolation in two ways. First, when the atmosphere.Transparency of the
sun is almost overhead, the rays of the atmosphere: Transparency of the
sun are vertical. The angle of incidence atmosphere also determines the amount
is large hence, they are concentrated in a of insolation reaching the earth’s
smaller area, giving more amount of surface. The transparency depends upon
insolation at that place. If the sun’s rays cloud cover, its thickness, dust particles
are oblique, angle of incidence is small and water vapour, as they reflect, absorb
and sun’s rays have to heat up a greater or transmit insolation. Thick clouds
area, resulting in less amount of hinder the insolation to reach the earth
insolation received there. Secondly, the while clear sky helps it to reach the
sun’s rays with small angle, traverse surface. Water vapour absorb insolation,
more of the atmosphere, than rays resulting in less amount of insolation
striking at a large angle. Longer the path reaching the surface.
of sun’s rays, greater is the amount of
reflection and absorption of heat by Heat Budget
atmosphere. As a result the intensity of
insolation at a place is less. Energy emitted by the Earth's climate
(ii) Duration of the day. (daily sunlight system tends to maintain a balance with
period) :-The duration of day is solar energy coming into the system.
controlled partly by latitude and partly This balance, known as the radiation
by the season of the year. The amount of budget, allows the Earth to maintain the
insolation has close relationship with moderate temperature range essential
the length of the day. It is because for life as we know it.
insolation is received only during the There is positive radiation balance
Page 36
CrackJPSC Mains Paper III Module B (Geography)
between 35°S and 40°N, which drives these 35 units, 6 units are reflected back
the weather systems. Ocean currents to space from the top of the atmosphere,
even out the difference 27 units reflected by clouds and 2 units
When incoming short-wave solar from the snow and ice covered
radiation (Figure 3), known as surfaces.
insolation, enters the Earth's climate
system, a portion of it is absorbed at the
Earth's surface, causing the surface to
heat up. Some of the absorbed energy is
then radiated outward in the form of
long-wave infrared radiation. Cloud
layers trap some of the radiation from
the Earth's surface, and then emit long-
wave radiation, both outward and back
to the surface. The temperature of the
Earth's surface is about 33°C higher due
to long-wave radiation contribution
from the atmosphere .
The amount of radiation emitted by the
Earth's surface that makes it back to Out of the remaining 65 units (100-35),
space is the result of many interrelated only 51 units reach the earth’s surface
influences, such as the amount of cloud and 14 units are absorbed by the various
cover, cloud heights, characteristics of gases, dust particles and water vapour of
cloud droplets, amount and distribution the atmosphere.
of water vapor and other greenhouse The earth in turn radiates back 51 units
gases, land features, surface in the form of terrestrial radiation. Out
temperature, and the transparency of of these 51 units of terrestrial radiation,
the atmosphere. In the warm tropical 34 units are absorbed by the atmosphere
areas, low values of outgoing longwave and the remaining 17 units directly go to
radiation (OLR) correspond to large space. The atmosphere also radiates 48
amounts of high, cold clouds while high units (14 units of incoming radiation
values of OLR correspond to relatively and 34 units of outgoing radiation
clear areas or cloudy areas with low, absorbed by it) back to space. Thus 65
warm clouds. In the extra-tropics OLR units of solar radiation entering the
values typically decrease with decreasing atmosphere are reflected back into the
temperature. space. This account of incoming and
outgoing radiation always maintains the
Let us suppose that the total heat balance of heat on the surface of the
(incoming solar radiation) received at earth.
the top of the atmosphere is 100 units
(see fig. 10.2) Roughly 35 units of it are
reflected back into space even before
reaching the surface of the earth. Out of
Page 37
CrackJPSC Mains Paper III Module B (Geography)
Page 38
CrackJPSC Mains Paper III Module B (Geography)
Page 39
CrackJPSC Mains Paper III Module B (Geography)
An airmass is a large body of air with Atlantic and Pacific, and smaller water
relatively uniform thermal and moisture bodies such as the Caribbean Sea and
characteristics. Airmasses cover large the Gulf of Mexico).
regions of the earth, typically several
hundred thousand square kilometers. Polar air masses, containing little
Airmasses can be as deep as the depth of moisture and low temperatures move
the troposphere or as shallow as 1 to 2 downward from the poles. Air masses
km. that form over water are generally moist,
Airmasses form when air remains over a and those that form over the tropical
relatively flat region of the earth* with oceans are both moist and warm.
homogeneous surface characteristics for Because of the Coriolis effect due to the
an extended period of time. ( Canadian Earth's rotation, air masses generally
and Siberian plains, cool oceanic regions move across North America from west to
such as the North Atlantic and Pacific, east. But, because of the differences in
deserts, such as the Sahara and the moisture and heat, the collision of these
American southwest, and tropical air masses can cause instability in the
oceanic regions including the equatorial atmosphere.
Page 40
CrackJPSC Mains Paper III Module B (Geography)
Polar air mass is cold and tropical air between two large air masses. The
mass is warm. When cold air mass and warm, moist air might dominate an area
warm air mass blow against each other, hundreds of miles across, while in
the boundary line of convergence another part of the continent a cold, dry
separating the two air masses is termed air mass holds sway over an equally
as front. When the warm air mass, large region. However, where the two air
moves upward over the cold air mass the masses meet, the transition layer
front formed in such a situation is called between them may be only a few tens of
warm front. On the contrary, when the miles across, clearly a sharp transition
cold air mass advances faster and between two massive bodies of air.
undercuts the warm air mass and forces
the warm air upwards, the front so Fronts are recognized by the following
formed is called cold front. The frontal properties:-
surface of cold front is steeper than that
of a warm front . A prevailing air mass in Sharp temperature changes over
any region - polar, tropical, maritime or a relatively short distance.
continental largely controls the regions Sometimes change of 10 to 20 C
general weather. may be observed.
Change in moisture content
Different air masses are:- Rapid shifts in wind direction
Pressure changes
i. Maritime tropical (mT) Clouds and precipitation patterns
ii. Continental tropical (cT)
iii. Maritime polar (mP) Types of Fronts:-
iv. Continental polar (cP)
v. Continental arctic (cA). Warm Fronts: A warm front occurs
when a warm air mass advances and
Where ‘m’ stands for Maritime; ‘c’ replaces a cold air mass. On a weather
stands for continental; ‘T’ stands for map, a warm front is depicted as a red
tropical; ‘P’ stands for polar and ‘A’ arc, with red semicircles pointing in the
stands for arctic region. direction of the advancing warm air.
Page 41
CrackJPSC Mains Paper III Module B (Geography)
place.
cyclones
are mainly observed in Atlantic Ocean
Page 42
CrackJPSC Mains Paper III Module B (Geography)
Page 43
CrackJPSC Mains Paper III Module B (Geography)
saturated through evaporation. This The temperature of the air falls in two
evaporation will cease once saturation ways. Firstly, cooling occurs around very
point is reached. However, if there is small particles of freely floating air when
wind, it will blow that saturated or it comes in contact with some colder
nearly saturated air away from the object. Secondly, loss in air temperature
evaporating surface and replace it with takes place on a massive scale due to
air of lower humidity. This allows rising of air to higher altitudes. The
evaporation to continue as long as the condensation takes place around the
wind keep blowing saturated air away smoke, salt and dust particles which
and bring drier air. attract water vapour to condense around
(v) Cloud cover :-The cloud cover them. They are called hygroscopic
prevents solar radiation and thus nuclei. When the relative humidity of an
influences the air temperatures at a air is high, a slight cooling is required to
place. This way, it indirectly controls the bring the temperature down below dew
process of evaporation. point. But when the relative humidity is
low and the temperature of the air is
Condensation high, a lot of cooling of the air will be
necessary to bring the temperature
Condensation the process by which down below dew point. Thus,
water vapor (gas) in the atmosphere condensation is directly related to the
turns into water (liquid state). It is the relative humidity and the rate of cooling.
opposite of evaporation. This stage is
very important because it is the cloud here are four types of condensation and
formation stage. Cool temperatures are the worst period for such problems is
essential for condensation to happen, September to May:-
because as long as the temperature in
the atmosphere is high, it can hold the 1. Surface condensation. This is the most
water vapor and delay condensation. familiar type of condensation, taking the
form of water on window panes, cold
When a gas is cooled sufficiently or, in wall surfaces and tiles.
many cases, when the pressure on the
gas is increased sufficiently, the forces of 2. Interstitial condensation. This is
attraction between molecules prevent condensation forming between walls or
them from moving apart, and the gas within the building structure.
condenses to either a liquid or a solid.
3. Reverse condensation. This is also
Example: Water vapor condenses called “Summer condensation”. If rains
and forms liquid water (sweat) on drenches a wall and strong sunlight then
the outside of a cold glass or can. dries it, the heat can actually force water
Example: Liquid carbon dioxide vapour into the wall. When it then meets
forms at the high pressure inside an insulated surface, it forms
a CO2 fire extinguisher. condensation at that barrier.
Page 44
CrackJPSC Mains Paper III Module B (Geography)
Page 45
CrackJPSC Mains Paper III Module B (Geography)
Page 46
CrackJPSC Mains Paper III Module B (Geography)
Page 47
CrackJPSC Mains Paper III Module B (Geography)
Dfc
(Cold,
Humid Sikkim, Arunachal Pradesh
~200 cm
winters type and parts of Assam
with shorter
summer)
Mountain areas of
Et Uttarakhand
(Tundra Rainfall varies from year to year.
Type) The average temperature
varies from 0 to 10°C
Higher areas of Jammu &
Kashmir and Himachal
E
Pradesh in which the
(Polar Precipitation occurs in the form of snow
temperature of the warmest
Type)
month varies from 0° to
10°C
Page 48
CrackJPSC Mains Paper III Module B (Geography)
Page 49
CrackJPSC Mains Paper III Module B (Geography)
(Humid
It ranges from Punjab to Assam Rainfall from 100-150 cm
Subtropical
Climate with dry
winters)
Mountain areas of Himalayas
H (Mountain including Jammu & Kashmir, The average temperature varies
Climate) Uttarakhand, Himachal Pradesh, from 0 to 10°C.
Sikkim, Arunachal Pradesh
Page 50
CrackJPSC Mains Paper III Module B (Geography)
Page 51
CrackJPSC Mains Paper III Module B (Geography)
Greenhouse effect
The greenhouse effect is a natural process that warms the Earth's surface. When the
Sun's energy reaches the Earth's atmosphere, some of it is reflected back to space and
the rest is absorbed and re-radiated by greenhouse gases. It is the process by which
radiation from a planet's atmosphere warms the planet's surface to a temperature above
what it would be without its atmosphere. If a planet's atmosphere contains radioactively
active gases (i.e., greenhouse gases) the atmosphere will radiate energy in all directions.
The greenhouse effect comes from molecules that are more complex and much less
common. Water vapour is the most important greenhouse gas, and carbon dioxide
(CO2) is the second-most important one. Methane, nitrous oxide, ozone and several
other gases present in the atmosphere in small amounts also contribute to the
greenhouse effect. In the humid equatorial regions, where there is so much water vapour
in the air that the greenhouse effect is very large, adding a small additional amount of
CO2 or water vapour has only a small direct impact on downward infrared radiation.
However, in the cold, dry polar regions, the effect of a small increase in CO2 or water
vapour is much greater. The same is true for the cold, dry upper atmosphere where a
small increase in water vapour has a greater influence on the greenhouse effect than the
same change in water vapour would have near the surface.
Energy;
Industry;
Agriculture;
Waste; and
Land Use Land Use Change
Page 52
CrackJPSC Mains Paper III Module B (Geography)
Global warming
An increase in the average temperature of Earth’s near surface air and oceans since the
mid-20th century
4th assessment report of IPCC: global temperature increased 74+0.18 degree C during
the 20th century.
Caused by greenhouse gases
o Water vapour, Co2, Methane, Nitrous Oxide, Ozone, CFCs (in order of
abundance)
Since the industrial revolution, the burning of fossil fuels has increased the levels of Co2
in the atmosphere from 280 ppm to 390 ppm.
Climatic changes
It is the long term change in the statistical distribution of weather patterns over
periods of time
Though it has been happening naturally for millions of years, in recent years it
has accelerated due to anthropogenic causes and has been causing global
warming.
UNFCCC defines climate change as – “a change of climate which is attributed
directly or indirectly to human activity that alters the composition of the global
atmosphere and which is in addition to natural climate
variability observed over comparable time periods”
Page 53
CrackJPSC Mains Paper III Module B (Geography)
Page 54
CrackJPSC Mains Paper III Module B (Geography)
Approximate length of the Great Himalayan range: 2500 KM. Width: 160-400 KM
Kashmir Himalayas
Page 55
CrackJPSC Mains Paper III Module B (Geography)
Inhabited with the Bhotia They migrate to higher reaches (Bugyals) in summer and
return to the valleys during winters.
Arunachal Himalayas
Page 56
CrackJPSC Mains Paper III Module B (Geography)
Keibul Kamjao National Park located in the Bishnupur district of Manipur is the only
floating park in the world and is an integral part of the Loktak Lake. Home to the
endangered Manipur Eld’s Deer or Brow-antlered Deer or Sangai or Dancing Deer.
Mizoram is also known as the ‘Molassis basin’ which is made up of soft unconsolidated
deposits.
1. Bhabar
2. Tarai
3. Alluvial Plains (Khadar and Bangar)
Bhabar
Tarai
Alluvial Belt
South of Tarai.
Features of mature stage of fluvial erosional and depositional landforms such as sand
bars, meanders, ox-bow lakes and braided channels. Riverine islands in Brahmaputra.
Brahmaputra takes a turn an almost 90 degree turn at Dhubri (Assam) before entering
Bangladesh.
Peninsular Plateau
Bounded by the Delhi ridge, Rajmahal Hills, Gir range and Cardamom hills.
Made up of a series of patland plateaus: Hazaribagh, Palamu, Ranchi, Malwa,
Coimbatore, Karnataka etc.
One of the oldest and most stable landmass of India.
Page 57
CrackJPSC Mains Paper III Module B (Geography)
Physiographic Features: Tors, block mountains, rift valleys, spurs, bare rocky structures,
hummocky hills and quartzite dykes offering natural sites for water storage.
Black soil in western and northwestern parts.
Bhima fault in this region has frequent seismic activity (Lathur earthquake)
NW part also has ravines and gorges: Chambal, Bhind and Morena.
1. Deccan Plateau
2. Central Highlands
3. Northwestern Plateau
Deccan Plateau
Central Highlands
Northeastern Plateau
Page 58
CrackJPSC Mains Paper III Module B (Geography)
Indian Desert
Aka Marusthali
Northwest of the Aravali hills
Dotted with longitudinal dunes and barchans.
Low rainfall: >150 mm per year Low vegetation cover
Evidence that this area was under the sea during the Mesozoic era.
Features: mushroom rocks, shifting dunes and oasis.
Rivers are ephemeral: Luni. Brackish lakes. Inland drainage.
Coastal Plains
Two divisions:
Submerged coastal plain. Hence, a narrow belt. Narrow in middle and broader towards
north and south.
Ports: Provides natural conditions for the development of ports and harbours due to
submergence. Kandla, Mazagaon (Mumbai), JLN port Navha Sheva, Maramagao,
Mangalore, Cochin etc.
Mumbai has the world’s largest natural harbour.
May be divided into: Kachchh and Kathiawar coast in Gujarat, Konkan coast, Goan coast
and Malabar coast.
Rivers don’t form delta.
Kayals (Backwaters): Found in the Malabar coast. Used for fishing and inland
navigation. Every year Nehru Trophy Vallamkali (boat race) is held in Punnamada
Kayal in Kerala.
Broader
Emergent coast. Hence, less number of ports and harbours. Chennai, Vizag, Paradwip,
Haldia.
Delta formation
Page 59
CrackJPSC Mains Paper III Module B (Geography)
The Islands
Two major island groups: Ritchie’s archipelago and the Labrynth island.
The group is divided into: Andaman in the North and Nicobar in the South.
Andaman and Nicobar separated by the Ten Degree channel.
Barren Island
Peaks: Saddle Peak (N.Andaman – 738 m), Mt. Diavolo (Middle Andaman – 515 m), Mt.
Koyob (S Andaman – 460 m) and Mt. Thuiller (Great Nicobar – 642 m)
Coral deposits found
Convectional rainfalls and equatorial type of vegetation.
Page 60
CrackJPSC Mains Paper III Module B (Geography)
Drainage pattern of an area depends on the geological time period, nature and structure
of rocks, topography, rocks, slope, amount of water and periodicity of flow.
A river drains the water collected from a specific area, which is called its catchment
area.
Nearly 77 pc of drainage is towards the Bay of Bengal while about 23 pc is towards the
Arabian Sea.
Over the plains, rivers of this system change the course often. River Kosi is also known
as the ‘sorrow of Bihar’ due to flooding by its frequent change of course by deposition of
sediments.
Evolution
Geologists believe that a mighty river called Shivalik or Indo-Brahma traversed the
entire length of the Himalayas some 5-24 million years ago. Over time this got
dismembered into the present three major river systems.
Indus river originates from a glacier near Bokhar Chu in Tibet in the Kailash Mountain
range. Known as Singi Khamban (Lion’s mouth) in Tibet. It forms a spectacular gorge
near Gilgit in J&K. Enters Pakistan near Chillar in the Dardistan region. Flows only
through the Leh distt of J&K.
Smaller tributaries: Shyok, Gilgit, Zaskar, Nubra, Hunza, Shigar, Gasting, Dras. On right
bank: Kabul river, Khurram, Tochi, Gomal, Viboa and hte Sangar.
Page 61
CrackJPSC Mains Paper III Module B (Geography)
Page 62
CrackJPSC Mains Paper III Module B (Geography)
Ganga rises in the Gangotri glacier near Gaumukh in the Uttarkashi district. Here it is
known as the Bhagirathi. At Devprayag, Bhagirathi meets Alaknanda and is known as
Ganga hereafter.
Panchprayag
Joshimath
Vishnu Ganga
Dhauli and Vishnu Ganga meet to form Alaknanda
Page 63
CrackJPSC Mains Paper III Module B (Geography)
Agra canal
Origin: Mhow in Malwa plateau.
Chambal
Gandhi Sagar dam, Rana Pratap Sagar dam and Jawahar Sagar dam.
Page 64
CrackJPSC Mains Paper III Module B (Geography)
Left Bank tributaries (LBT): Ramganga, Gomati, Ghaghara, Gandak, Kosi and
Mahananda.
Due to a higher temperature over the land in summer, a low pressure area develops over
the continents and the winds blow from neighbouring oceans towards the land. These
winds are of maritime origin and hence cause ample rainfall in summer. On the other
hand, the continents become colder than the neighboring oceans in winter. As a result a
high pressure area is developed
over the continents. Therefore, winds blow from land to sea in winter. These winds,
being of continental origin, are dry and do not cause rain.
Page 65
CrackJPSC Mains Paper III Module B (Geography)
which ultimately help to trigger the burst of Indian monsoon along with it vigorous
advance over the Indian subcontinent.
As long as the position of upper air jet stream is maintained above the surface low
pressure to the south of the Himalayas the dynamic anticyclonic conditions persist in
the northwestern part of Indian subcontinent which obstruct the ascent of air from the
surface low as the air is continuously descending from the above. This is the reason why
the months of April, May and June are dry inspite of high temperature and evaporation
while upper air low pressure in the east of the Himalayas over Myanmar, Assam and
Bangladesh helps in ascend of air and produce rainfall.
During October and November, the high pressure over northern lndia, the winds start
blowing from northeast as retreating monsoons. Clear skies and the increase in mercury
northern plains is observed which is termed as ‘October heat’. At this time, the low
pressure conditions shift to the Bay of Bengal giving rise to cyclonic depressions. These
cyclonic depressions often results in the destruction of life and property generally on the
eastern coast and the southern coast. Most of the rainfall of the Coromandel Coast is
derived from depressions and cyclones.
Page 66
CrackJPSC Mains Paper III Module B (Geography)
Green Revolution was largely confined in wheat crop and in northern India such as
Punjab, resulting in a limited contribution to overall economic development of the
country. On the contrary, the agricultural growth in the 1980s (the second wave of the
Green Revolution) involved almost all the crops including rice and covered the whole
country, it enabled to raise rural income and alleviate rural poverty substantially. Such a
rise of rural India as a "market‟ for non-agricultural products and services was an
important pre-requisite for the rapid economic growth based on non-agricultural
sectors‟ development in India after the 1990s.
Page 67
CrackJPSC Mains Paper III Module B (Geography)
India has failed to extend the concept of high-yield value seeds to all crops or all regions.
In terms of crops, it remain largely confined to foodgrains only, not to all kinds of
agricultural produce. In regional terms, only Punjab and Haryana states showed the best
results of the Green Revolution. The eastern plains of the River Ganges in West Bengal
state also showed reasonably good results. But results were less impressive in other
parts of India. Those states which were originally rich derived the benefits of Green
Revolution, e.g., Punjab, Haryana and Western U.P. As the benefits of new technology
concentrated mainly in these areas, other Indian states could not match them.
Food scarcity
According to FAO Food Security is "a situation in which all people at all times have
access to adequate quantities of safe and nutritious food to lead a healthy and active
life".
1) adequacy, i.e. supplies from domestic production, stocks and imports are sufficient to
meet the nation's needs,
2) availability i.e. stability of supply both spatially and temporally throughout the year
and
3) access, i.e. the population has sufficient purchasing power to gain access to its food
needs.
India is one of the few countries which have experimented with a broad spectrum of
programmes for improving food security. It has already made substantial progress in
terms of overcoming transient food insecurity by giving priority to self-sufficiency in
foodgrains and through procurement and public distribution of foodgrains, employment
programmes, etc. However, despite a significant reduction in the incidence of poverty
chronic food insecurity persists in a large proportion of India’s population.
The range of adverse events, including reduced freshwater availability and more
frequent extreme weather events, will considerably increase the risks for more efficient
crop production and livestock management. Climate change is also likely to affect soil
quality by depleting organic matter – a major contributor to soil fertility. In extreme
cases, the degradation of the agricultural ecosystems could mean desertification,
resulting in a total loss of the productive capacity of the land in question.
Page 68
CrackJPSC Mains Paper III Module B (Geography)
Food security is a multidimensional concept covering even the micro level household
food security,energy intakes and indicators of malnutrition.
While India has seen impressive economic growth in recent years, the country still
struggles with widespread poverty and hunger. India’s poor population amounts to
more than 300 million people, with almost 30 percent of India’s rural population living
in poverty. The good news is, poverty has been on the decline in recent years. According
to official government of India estimates, poverty declined from 37.2% in 2004-05 to
29.8% in 2009-10.
India suffered two very severe droughts in 1965 and 1966. Food Aid to India was
restricted to a monthly basis by USA under the P.L. 480 programme. The Green
Revolution made a significant change in the scene. India achieved self-sufficiency in
food grains by the year 1976 through the implementation of the seed- water-fertilizer
policy adopted by the Government of India.
Food grain production increased four-fold during 1950-51 and 2001-2002 from 51
million tons to 212 million tones. The country is no longer exposed to real famines. But
the regional variation in the success of Green Revolution which was chiefly limited to
northern- Western states has lead to the divide in the nation. Evergreen revoloution and
Bringing green revolution to eastern India is the need of the hour.
Green revolution was focused on wheat and rice and thus the production of pulses was
stagnant.
National Food Security Mission comprising rice, wheat and pulses to increase the
production of rice by 10 million tons, wheat by 8 million tons and pulses by 2 million
tons by the end of the Eleventh Plan (2011-12). The Mission is being continued during
12th Five Year Plan with new targets of additional production of food grains of 25
million tons of food grains comprising of 10 million tons rice, 8 million tons of wheat, 4
million tons of pulses and 3 million tons of coarse cereals by the end of 12th Five Year
Plan.
Page 69
CrackJPSC Mains Paper III Module B (Geography)
The National Food Security Mission (NFSM) during the 12th Five Year Plan will have
five components
(ii) NFSM-Wheat;
(iii) NFSM-Pulses,
Government through Public Distribution System has tried to counter the problem of
food insecurity by providing the food grains through fair price shops.
The central Government through Food Corporation of India has assumed the
responsibilities of procurement,storage,transfer and bulk allocation of food grains to
state governments.
PDS was initiated as a deliberate social policy of the government with the objectives of:
i) Providing foodgrains and other essential items to vulnerable sections of the society at
resonable (subsidised) prices;
ii) to have a moderating influence on the open market prices of cereals, the distribution
of which constitutes a fairly big share of the total marketable surplus; and
Page 70
CrackJPSC Mains Paper III Module B (Geography)
The focus of the Targeted Public Distribution System (TPDS) is on “poor in all areas”
and TPDS involves issue of 35 Kg of food grains per family per month for the
population Below Poverty Line (BPL) at specially subsidized prices. The TPDS requires
the states to Formulate and implement :-
Tropical Evergreen forests grow in the high rainfall areas of the Western Ghats, North –
eastern India and the Andaman and Nicobar Islands. These forests grow in areas where
the monsoon period lasts for several months.
Deciduous forests are found in regions with a moderate amount of seasonal rainfall that
lasts for only a few months. Most of the forests in which Teak trees grow are of this type.
The deciduous trees shed their leaves during the winter and hot summer months.
Dry tropical thorn forest occurs in areas of low rainfall. Forest types are saprophytic in
nature. Trees are shorter than deciduous type. These forests mostly occur in the scanty
rainfall region of Rajasthan, Punjab and Haryana. Most of the species are ‘acacia’ type.
Tidal Forests grow along the coast especially in the river deltas. These plants are
uniquely adapted to be able to grow in a mix of saline and freshwater. They grow
Page 71
CrackJPSC Mains Paper III Module B (Geography)
luxuriantly in muddy areas covered with silt that the rivers have brought down. The
mangrove trees have breathing roots that emerge from the mud banks.
Biodiversity, or biological diversity, is the variety of all life forms.Sum total of all the
variety of living organisms on earth constitute biodiversity. There are three levels of
biodiversity:
Biodiversity is not uniformly distributed across the geographical regions of the earth.
Certain regions of the world are very rich in biodiversity. We call such areas as “mega
diversity zones”. We also refer to them as “hot-spots”. For example, India accounts for
only 2.4 % of the land area of the world; but it contributes approximately 8% species to
the global diversity due to existence of such pockets.
Humans depend for their sustenance, health, well being and cultural growth on nature.
Biotic resources provide food, fruit, seed, fodder, medicines and a host of other goods
and services. Importance of Biodiversity is due to:-
Page 72
CrackJPSC Mains Paper III Module B (Geography)
Page 73
CrackJPSC Mains Paper III Module B (Geography)
There are several strategies which are adapted for conservation of Biodiversity. Some of
these are:
In-situ Conservation Conserving the animals and plants in their natural habitats is
known as in situ conservation. The established natural habitats are:
• National parks and sanctuaries
• Biosphere reserves
• Nature reserves
• Reserved and protected forests
• Preservation plots
• Reserved forests
Page 74
CrackJPSC Mains Paper III Module B (Geography)
Page 75
CrackJPSC Mains Paper III Module B (Geography)
Alluvial soils:-Alluvial soils are formed mainly due to silt deposited by Indo
Gangetic Brahmaputra rivers. In coastal regions some alluvial deposits are
formed due to wave action.
Black soils:-The black soils are found mainly on the Deccan lava region covering
large parts of Maharashtra, some parts of Gujarat and Madhya Pradesh and small
parts of Karnataka, Andhra Pradesh and Tamil Nadu. The soils are formed by
disintegration of volcanic basaltic lava. The colour of the soil is generally black
due to presence of compounds of aluminium and iron.
Red soils:- these soils are light textured with porous and friable structure and
there is absence of lime Kankar and free carbonates. They have neutral to acidic
reaction and are deficient in nitrogen humus, phosphoric acid and lime.
Laterite and Lateritic soils:-These soils are red to reddish yellow in colour and
low in N, P, K, lime and magnesia. These soils are formed in-situ under
conditions of high rainfall with alternation dry and wet periods. On account of
Page 76
CrackJPSC Mains Paper III Module B (Geography)
heavy rainfall there is an excessive leaching of soil colloids and silica hence the
Page 77
CrackJPSC Mains Paper III Module B (Geography)
Soil erosion is described as the carrying away of soil. It is the removal of the soil by
natural elements like water, wind, glacier and wave. Gravity tends to move soil down
slope either very slowly as in soil creep or very rapidly as in landslides. The present
shape of land has been carved through thousands of years.
Soil conservation is the preventing of soil loss from erosion or reduced fertility caused
by over usage,Soil acidification, salinization or other chemical soil contamination.
Slash-and-burn and other unsustainable methods of subsistence farming are practiced
in some lesser developed areas.
Disaster
Types of Disaster
Hazards are routinely divided into natural or manmade, although complex disasters,
where there is no single root cause, are more common in developing countries. A
specific disaster may spawn a secondary disaster. A classical example is Earthquake that
cause Tsunami that results in coastal flooding.
Natural Hazards
Natural Hazards are naturally occurring physical phenomenon caused either by rapid or
slow onset events which can be
Page 78
CrackJPSC Mains Paper III Module B (Geography)
Although these hazards are natural but there are certain aggravating factors which will
result in increased frequency, complexity and severity of disasters. These factors are
Climate change
Unplanned urbanisation
Under development
Poverty
Pandemics
Earthquakes
Earthquakes are tectonic in origin; that is the moving plates are responsible for the
occurrence of violent shakes. The occurrence of an earthquake in a populated area may
cause numerous casualties and injuries as well as extensive damage to property.
As per the current seismic zone map of the country, over 59 per cent of India’s land area
is under threat of moderate to severe seismic hazard-; that means it is prone to shaking
of MSK Intensity VII and above In fact, the entire Himalayan belt is considered prone to
great earthquakes of magnitude exceeding 8.0-; and in a relatively short span of about
50 years, four such earthquakes have occurred: 1897 Shillong (M8.7); 1905 Kangra
(M8.0); 1934 Bihar-Nepal (M8.3); and 1950 Assam-Tibet (M8.6). Scientific publications
have warned of the likelihood of the occurrence of very severe earthquakes in the
Himalayan region, which could adversely affect the lives of several million people in
India.
Page 79
CrackJPSC Mains Paper III Module B (Geography)
In our present state of knowledge, earthquakes can neither be prevented nor predicted
in terms of their magnitude, or place and time of occurrence. Therefore the most
effective measures of risk reduction are pre disaster mitigation, preparedness and
preventive measures.
Govt efforts
Floods
Floods have been recurrent phenomenon in many parts of India, causing loss of lives
and public property and bringing untold misery to the people, especially those in the
rural areas. There is also a larger economic impact, as they derail economic activities,
thus affecting growth. Indian continent has peculiar climatic conditions since it has
floods in some parts whereas drought in other parts.
Over the years, several expert Committees have studied the problems caused by floods
and suggested various measures for their management to the Government. However,
despite the various steps undertaken over the last five decades, the trend of increasing
damage and devastation brought by floods has posed a challenge to the Government as
well as to the people. The approaches to flood management presently exercised in India
also need to give a re-look to have an integrated strategy for policy and management
related to floods.
This region consists of the rivers Brahmaputra & Barak and their tributaries covering
seven states .The catchments of these rivers receive very heavy rainfall ranging from 110
cm. to 635 cm. a year which occurs mostly during the months of May / June to
September. As a result, floods in this region are severe and quite frequent.
The river Ganga and its numerous tributaries, of which important ones are the Yamuna,
the Sone, the Ghaghra, the Gandak, the Kosi and the Mahananda, constitute this river
Page 80
CrackJPSC Mains Paper III Module B (Geography)
region. The flood problem is mostly confined to the areas on the northern bank of the
river Ganga. The damage is caused by the northern tributaries of the Ganga by spilling
over their banks and changing their courses.
North West River Region:
The main rivers in this region are the Sutlej, the Beas, the Ravi, the Chenab and the
Jhelum, the tributaries of Indus, all flowing from the Himalayas. These carry quite
substantial discharge during the monsoon and also large volumes of sediment. They
change their courses frequently and leave behind tracts of sandy waste. Compared to the
Ganga and the Brahmaputra river region, the flood problem is relatively less in this
region. The major problem is that of inadequate surface drainage which causes
inundation and water logging over vast areas.
Central India and Deccan Region:
The important rivers in this region are the Narmada, the Tapi , the Mahanadi, the
Godavari, the Krishna and the Cauvery. These rivers have mostly well defined stable
courses. They have adequate capacity within the natural banks to carry the flood
discharge except in the delta area. The lower reaches of the important rivers on the East
Coast have been embanked, thus largely eliminating the flood problem.
Different measures have been adopted to reduce the flood losses and protect the flood
plains. Depending upon the nature work, Flood protection and flood management
measures may be broadly classified as under:
The engineering measures for flood control which bring relief to the flood prone areas
by reducing flood flows and thereby the flood levels are –
(c) by diversion of a part of the peak flow to another river or basin, where such diversion
would not cause appreciable damage.
(d) by constructing a parallel channel bye passing a particular town/reach of the river
prone to flooding.
The engineering methods of flood protection, which do not reduce the flood flow but
reduce spilling, are:
Page 81
CrackJPSC Mains Paper III Module B (Geography)
(a) embankments which artificially raise the effective river bank and thereby prevent
spilling and
(b) channel and drainage improvement works, which artificially reduce the flood water
level so as to keep the same, confined within the river banks and thus prevent spilling.
Administrative methods
(a) Facilitating timely evacuation of the people and shifting of their movable property to
safer grounds by having advance warning of incoming flood i.e. flood forecasting, flood
warning in case of threatened inundation
(b) Discouraging creation of valuable assets/settlement of the people in the areas subject
to frequent flooding i.e. enforcing flood plain zoning regulation.
Landslides
the northward movement of the Indian plate towards China causes continuous stress on
the rocks rendering them friable, weak and prone to landslides and earthquakes. The
slow motion of the Indian crust, about 5 cm/year accumulates stress to which natural
disasters are attributed. Some landslides make unique, and unparalleled catastrophes.
Landslides and avalanches are among the major hydro-geological hazards that affect
large parts of India besides the Himalayas, the Northeastern hill ranges, the Western
Ghats, the Nilgiris, the Eastern Ghats and the Vindhyans, in that order, covering about
15 % of the landmass. The Himalayas alone count for landslides of every fame, name and
description- big and small, quick and creeping, ancient and new.
Page 82
CrackJPSC Mains Paper III Module B (Geography)
Mizoram.These are some of the more recent examples of landslides. The problem
therefore needs to be tackled for mitigation and management for which hazard zones
have to be identified and specific slides to be stabilized and managed in addition to
monitoring and early warning systems to
Remedial Measures
Afforestation
Use of geo textiles which reduces slope instability
Making community aware about impact of landslides and build their capacity to
reduce vulnerability
Proper mapping of Landslide zone and shifting people from such zones
No mining activities should be allowed in Eco sensitive zones
Cyclones
The Indian subcontinent is one of the worst affected regions in the world. The
subcontinent with a long coastline of 8041 kilometres is exposed to nearly 10 per cent of
the world’s tropical cyclones. Of these, the majority of them have their initial genesis
over the Bay of Bengal and strike the East coast of India. On an average, five to six
tropical cyclones form every year, of which two or three could be severe. More cyclones
occur in the Bay of Bengal than the Arabian Sea and the ratio is approximately 4:1.
Remedial measures
Page 83
CrackJPSC Mains Paper III Module B (Geography)
DROUGHT
In India, around 68% of the country is prone to drought in varying degrees. 35% which
receives rainfall between 750 mm and 1125 mm is considered drought prone while 33%
receiving less than 750 mm is chronically drought prone.
Page 84
CrackJPSC Mains Paper III Module B (Geography)
Creation of Drought Monitoring Cells (DMCs) cells at state level with requisite
staff.
Preparation of vulnerability maps for each state by the State DMCs. Development
of real-time drought related information by using information and
communication technology.
The watershed development approach would be taken up for drought
management.
Assessment of damage would include agricultural production, depletion of water
resources, livestock population, land degradation and deforestation as well as
human health.
Revamping of Drought Management Information System of Department of
Agriculture.
To enable micro level analysis and forecasting, automatic weather station and
rain-gauges to be put in place.
Development of drought resistant crop varieties through large scale research.
Formulation of a cloud seeding policy.
Promoting crop diversification through sprinklers/Drip irrigation systems (micro
irrigation techniques) etc.
Cloud Bursts
Highly concentrated rainfall over a small area lasting for a few minutes to few hours is
called a cloud burst. It leads to sudden flash floods and landslides in which houses
collapse and ultimately results in human casualties on a large scale.
Cloud bursts are manifestations of an intense whirling mass of fluid, on small scale, that
generate strong currents, which lift the moisture laden air with sufficient rapidity to
form dense towering vertical clouds which are capable of shedding water load with great
strength and ferocity.
Steep hills favour the formation of these clouds. Also, water flowing down steep slopes
brings debris, boulders and uprooted trees with great velocity, damaging any structure
that comes in the way.
There is no satisfactory technique for anticipating a cloud burst because they occur in
relatively small scale. A very fine network of radars is required to detect the likelihood of
a cloud burst which could be very expensive.Cloud bursts causes landslides and
flooding.
Tsunami
Page 85
CrackJPSC Mains Paper III Module B (Geography)
bodies, such as meteorites, can generate tsunamis. Tsunamis can savagely attack
coastlines, causing devastating property damage and loss of life.
The tsunami that occurred during 2004 Sumatra-Andaman earthquake of Mw 9.3 was
primarily caused by vertical displacement of the seafloor, in response to slip on the
inter-plate thrust fault. The earthquake and resulting tsunami in the Indian Ocean
affected many countries in Southeast Asia and beyond, including Indonesia, Sri
Lanka, India, Thailand, the Maldives, Somalia, Myanmar, Malaysia, Seychelles and
others.
The Government of India has put in place an Early Warning System for mitigation of
such oceanogenic disasters under the control of Indian National Center for Ocean
Information Services (INCOIS), Hyderabad. A state-of-the-art early warning centre was
established with the necessary computational and communication infrastructure that
enables reception of real-time data from sensors, analysis of the data, generation and
dissemination of tsunami advisories following a standard operating procedure.
The Guidelines recommends practical and effective ways for awareness generation,
capacity building, education, training and research & development for better tsunami
risk management. The Guidelines explore options for effective dissemination of
tsunami alert and warning messages generated by INCOIS to the concerned agencies
and coastal vulnerable communities exposed to tsunamis in a coordinated manner.
Heat Wave
A Heat Wave is a period of abnormally high temperatures, more than the normal
maximum temperature that occurs during the summer season in the North-Western
parts of India. Heat Waves typically occur between March and June, and in some rare
cases even extend till July. The extreme temperatures and resultant atmospheric
conditions adversely affect people living in these regions as they cause physiological
stress, sometimes resulting in death.
Higher daily peak temperatures and longer, more intense heat waves are becomingly
increasingly frequent globally due to climate change. India too is feeling the impact of
climate change in terms of increased instances of heat waves which are more intense in
Page 86
CrackJPSC Mains Paper III Module B (Geography)
nature with each passing year, and have a devastating impact on human health thereby
increasing the number of heat wave casualties.
The health impacts of Heat Waves typically involve dehydration, heat cramps, heat
exhaustion and/or heat stroke. The signs and symptoms are as follows:
The density of population is expressed as the number of persons per square kilometre.
According to 2011 census, the density of population in India is 382 persons per square
kilometre. Over the last 100 years density has increased more than four times.
Density and its variation across states can be accessed by the following table:-
Page 87
CrackJPSC Mains Paper III Module B (Geography)
Density
State Area Sq. Km Density 2011 Density 2001
2011
- India (Average) 3,287,240 382 324
1 Delhi 1,483 11,320 9,340
2 Chandigarh 114 9,258 7,900
3 Puducherry 490 2,547 2,034
4 Daman and Diu 111 2,191 1,413
5 Lakshadweep 30 2,149 1,895
6 Bihar 94,163 1,106 881
7 West Bengal 88,752 1,028 903
8 Kerala 38,852 860 819
9 Uttar Pradesh 240,928 829 690
Dadra and Nagar
10 491 700 449
Haveli
11 Haryana 44,212 573 478
12 Tamil Nadu 130,060 555 480
13 Punjab 50,362 551 484
14 Jharkhand 79,716 414 338
15 Assam 78,438 398 340
16 Goa 3,702 394 364
17 Maharashtra 307,713 365 315
18 Tripura 10,486 350 305
19 Karnataka 191,791 319 276
20 Gujarat 196,244 308 258
21 Andhra Pradesh 275,045 308 277
22 Orissa 155,707 270 236
23 Madhya Pradesh 308,252 236 196
24 Rajasthan 342,239 200 165
25 Uttarakhand 53,483 189 159
26 Chhattisgarh 135,192 189 154
27 Meghalaya 22,429 132 103
28 Manipur 22,327 128 103
29 Himachal Pradesh 55,673 123 109
Page 88
CrackJPSC Mains Paper III Module B (Geography)
Density
State Area Sq. Km Density 2011 Density 2001
2011
30 Nagaland 16,579 119 120
31 Sikkim 7,096 86 76
32 Jammu and Kashmir 222,236 56 46
33 Mizoram 21,081 52 42
Andaman and Nicobar
34 8,249 46 43
Islands
35 Arunachal Pradesh 83,743 17 13
Page 89
CrackJPSC Mains Paper III Module B (Geography)
For the first time since Independence, the absolute increase in population is more in
urban areas that in rural areas
Level of urbanization increased from 27.81% in 2001 Census to 31.16% in 2011 Census
ANDHRA
8,46,65,533 5,63,11,788 2,83,53,745 66.51 33.49
PRADESH
ARUNACHAL
13,82,611 10,69,165 3,13,446 77.33 22.67
PRADESH
Page 90
CrackJPSC Mains Paper III Module B (Geography)
NAGAR HAVELI
#
HIMACHAL
68,56,509 61,67,805 6,88,704 89.96 10.04
PRADESH
JAMMU &
1,25,48,926 91,34,820 34,14,106 72.79 27.21
KASHMIR
MADHYA
7,25,97,565 5,25,37,899 2,00,59,666 72.37 27.63
PRADESH
Page 91
CrackJPSC Mains Paper III Module B (Geography)
UTTAR
19,95,81,477 15,51,11,022 4,44,70,455 77.72 22.28
PRADESH
Age Structure:
Information is included by sex and age group (0-14 years, 15-64 years, 65 years and
over). The age structure of a population affects a nation's key socioeconomic issues.
Countries with young populations (high percentage under age 15) need to invest more in
schools, while countries with older populations (high percentage ages 65 and over) need
Page 92
CrackJPSC Mains Paper III Module B (Geography)
to invest more in the health sector. The age structure can also be used to help predict
potential political issues. For example, the rapid growth of a young adult population
unable to find employment can lead to unrest.
Sex Ratio:
Sex ratio is used to describe the number of females per 1000 of males. Sex ratio is a
valuable source for finding the population of women in India and what is the ratio of
women to that of men in India.
In the Population Census of 2011 it was revealed that the population ratio in India 2011
is 940 females per 1000 of males. The Sex Ratio 2011 shows an upward trend from the
census 2001 data. Census 2001 revealed that there were 933 females to that of 1000
males.
While Kerala with sex ratio of 1084 top the list, Daman and Diu with sex ratio of 618 is
at the bottom of the list.
Below is the list of states according to the sex ration. In the list we can see the states
with good sex ratio.
2011 Census
Child
S.No. State Sex Ratio
Sexratio
Page 93
CrackJPSC Mains Paper III Module B (Geography)
Page 94
CrackJPSC Mains Paper III Module B (Geography)
The earth’s carrying capacity in terms of its food resource is approaching its limits.
Oceanic supply of fish, rangelands which support livestock, and the hydrological cycle to
produce freshwater are strained. The backlog of unused agricultural technology is
shrinking in industrial and developing countries alike, slowing the rise in cropland
productivity. At the same time, soil erosion, air pollution, soil compaction, aquifer
depletion, the loss of soil organic matter, and the waterlogging and salting of irrigated
land are all slowing food production. At present, it appears that nothing can reverse the
worldwide decline in grain output per person. The bottomline is that the world’s farmers
can no longer be counted on to feed the projected additions to the present population.
Attaining a humane balance between food production and population growth now
depends more on family planners instead of farmers.
• Resource Scarcity:
– Food
• Environmental Impacts
– Soil degradation
– Deforestation
– Global Warming
Population growth would not be sustainable if it has important negative impacts that
will jeopardize the ability of future generations to meet their needs.
Page 95
CrackJPSC Mains Paper III Module B (Geography)
Settlements can broadly be divided into two types – rural and urban. Before discussing
about meaning and types of rural and urban settlement in India, we should know some
basic differences between rural and urban areas in general. (i) The major difference
between rural and urban areas is the function. Rural areas have predominantly primary
activities, whereas urban areas have domination of secondary and tertiary activities. (ii)
Generally the rural areas have low density of population than urban.
1. Compact/clustered/nucleated settlement
2. Semi-compact/Semi-clustered/fragmented settlement
3. Hemleted settlement
4. Dispersed settlement
Compact Settlements:
As the name suggests, these settlements have closely built up area. Therefore in
such settlements all the dwellings are concentrated in one central sites and these
inhabited area is distinct and separated from the farms and pastures.
Maximum settlements of our country comes under this category. They are spread
over almost every part of the country.
These settlements are distributed over the entire northern Indo-Ganga plain
(from Punjab in the north-west to West Bengal in the east), Orissa coast, basins
of Mahanadi in Chhattisgarh, coastal areas of Andhra Pradesh, cauvery delta of
Tamil Nadu, Maidaus of Karnataka, lower Assam and Tripura, in the valleys of
Siwaliks etc.
Sometimes people live in compact settlement for security or defence purpose. The
greatest example of this type is in Bundelkhand region of Madhya Pradesh and
Uttar Pradesh.
Page 96
CrackJPSC Mains Paper III Module B (Geography)
As the name suggests, the dwellings or houses are not well-knitted. Such settlements are
characterized by a small but compact nuclears around which hamlets are dispersed.
Hamleted Settlements:
These type of settlements, are fragmented into several small units. The main settlement
does not have much influence on the other units. Very often the original site is not easily
distinguishable and these hamlets are often spread over the area with intervening fields.
This segregation is often influenced by social and ethnic factors. The hamlets are locally
named as faliya, para, dhana, dhani, nanglay etc. These settlements are generally found
in West Bengal, eastern Uttar Pradesh, Madhya Pradesh and coastal plains.
Geographically it covers lower Ganga plain, lower valleys of the Himalayas and central
plateau or upland region of the country.
Dispersed Settlements:
This is also known as isolated settlements. Here the settlement is characterized by units
of small size which may consist of a single house to a small group of houses. It varies
from two to seven huts. Therefore, in this type, hamlets are scattered over a vast area
and does not have any specific pattern. Such type of settlements are found in tribal areas
of central part of India covering Chhota Nagpur plateau, Madhya Pradesh, Rajasthan,
etc. Such patterns are also common in the hills of north Bengal, Jammu & Kashmir,
Tamil Nadu and Kerala.
There are three factors that influence the type of settlements in India. These factors are
(i) Physical (ii) Ethnic or cultural and (iii) Historical or defence. Let us discuss these
factors one by one.
Page 97
CrackJPSC Mains Paper III Module B (Geography)
Physical Factors:
These include relief, altitude, soil capability, climate, drainage, ground water level, etc.
These factors influence the type and spacing of dwelling or instance, in dry regions of
Rajasthan, water is a crucial factor and, therefore, houses are situated along a pond or
well which guides the compactness of the settlement.
These include aspects like caste, community, ethnicity and religion. In India it is
commonly found that the main land owning caste resides at the centre of the village and
the other service providing castes on the periphery. This leads to social segregation and
fragmentation of a settlement into several units
In the past, mostly border areas of northwestern plains were conquered or attacked
frequently by outsiders. For a long time, apart from attack from outsiders, there had
been continuous fight between princely states and kingdom within the country
therefore, security concerns favoured the evolution of nucleated settlements.
Like rural settlements, urban settlements are classified on various bases. However,
classification based on size and function are most common. Let us discuss them one by
one
According to population size, census of India classifies urban centres into six classes.
Classwise urban settlements and their population
Class Population
Page 98
CrackJPSC Mains Paper III Module B (Geography)
Metropolitan Cities Cities having population in between one million to five million
Page 99
CrackJPSC Mains Paper III Module B (Geography)
Urban morphology
Urban morphology is the study of the form of human settlements and the process of
their formation and transformation.Morphological studies often deal with development
of forms and
pattern of the present city or other urban areas through time.
Urban morphology is the study of the physical form of a city, which consists of street
patterns, building sizes and shapes, architecture, population density and patterns of
residential, commercial, industrial and other uses, among other things. Special attention
is given to how the physical form of a city changes over time and to how different cities
compare with each other.
India exhibits a very stable settlement structure such that much of the urban growth
that has occurred has been because of the accretion to existing towns and settlements
and only marginally because of the emergence of new towns. As a result, the proportion
of urban population residing in towns above a certain population cut-off point continues
to increase, but there is little evidence of correlation between city size and rates of
population growth.
In other words we can state that the development of new urban centers in India has
been minimal and the urban growth has been accredited to the development of existing
centers.
Prof. E. Ahmad has identified some of the components of urban morphology as site
characteristics, historical background, sky-line, green open spaces, and water bodies,
physical and cultural dominants.
For the Census of India 2011, the definition of urban area is as follows;
1. All places with a municipality, corporation, cantonment board or notified town area
committee, etc.
2. All other places which satisfied the following criteria: i) A minimum population of
5,000; ii) At least 75 per cent of the male main working population engaged in non-
agricultural pursuits; and iii) A density of population of at least 400 persons per sq. km.
2. Those that have grown from medieval towns such as Lucknow, Delhi, Jaipur. These
towns have lot of features of medieval Islamic architecture with palaces, minarates,
walled city with Meena bazaars.
Page 100
CrackJPSC Mains Paper III Module B (Geography)
3. Cities that have grown from the British administrative centres. Most of them were
medieval towns or cantonment areas which retain lot of features of European Victorial
architecture.
4. During the post independence period a number of planned cities have been
developed. Chandigarh, Bhuvneshwar, Gandhinagar, Dispur and Bokaro are some of the
typical examples of planned cities.
Page 101
CrackJPSC Mains Paper III Module B (Geography)
The definition of function varies across the disciplines. In political science it refers to
duties, in mathematics it means the relationship between two variables and in
geography it is synonymous to occupation.
Geographers have classified towns on the basis of their site, situation, size, rank,
location and relative elevation. Functional classification of towns attempts to categorize
towns and cities according to their economic functions, thereby identifying their roles
within urban systems. Most classifications use employment and occupational data. In
the functional classification approach, towns are classified on the basis of their
dominant function. The functional classification of towns has been illustrated in the
following paras:
1.)Administrative town
The main function of administrative cities and towns is to administer the country/state
or a specific territory.It includes not only the capital cities of countries, but all the
centres of provinces, states, districts and other administrative divisions of the country.
2.Defensive Towns:
During the medieval period, most of the towns and cities used to be developed on the
defensive sites.Forts and garrisons used to be constructed at strategic places. The
defensive towns have barracks, cantonments, and training facilities for the armed forces,
airfields, and harbours for warships.Visakhapatnam, MHOW and Khadakwasla (India);
In many garrison and defensive towns, there is a clear division of land use between the
civil and military authorities, so that the military installations are often at a little
distance from the town or are grouped together in one part of the town. This is
necessary to maintain security, though often many town people are employed by the
military.
3.Cultural Centres:
There are numerous towns and cities in the world, almost in each of the countries,
which perform cultural functions.The cities of Oxford and Cambridge in England are the
most suitable examples of educational towns. In these towns, one may find colleges,
libraries, hostels, churches, playgrounds, parks and shopping centres. The
environmental pollution in these towns is almost insignificant.
Page 102
CrackJPSC Mains Paper III Module B (Geography)
The mining towns, fishing ports and lumbering centres fall under the category of
collection centres/towns. There are numerous metallic, non-metallics, precious stones
and energy resources which are obtained from mines.The towns which serve these
mines may be small settlements serving a particular mine such as Zawar near Udaipur
(Rajasthan), Bjiladela (Madhya Pradesh) and Digboi (Assam).They may be large in size
such as Raniganj, Hazaribagh (Bihar), Ipoh in the tin rich Kinta valley of Malaysia, or
Kuwait and Abadan in the oil producing regions of Kuwait and Tehran,
respectively.Such towns may have some industries related to the mineral mines, such as
smelters and refineries. The shops in such towns sell mining equipments and special
clothes needed for miners.
Urban places, town and cities in which some kind of manufacturing industry is the
major function is known as a production centre. The size and appearance of the town
are affected by the type of industry located there.
As stated at the outset, towns are classified according to their major functions. So, all
those towns (such as Mumbai, Kolkata, Chennai, etc.) can be put into a definite category
in which a large number of activities are conducted. Such towns are referred as
diversified in functions.
Over space and time, the functions of towns change. For example, defensive sites often
become restrictive when the town expands.Thus, many towns have restricted centres
which were once confined within the town walls and more extensive suburbs which grew
up outside the walls or after the walls were demolished.
Shahjahanabad (old Delhi), Padova (Italy), Lahore and Rawalpindi (Pakistan), Baghdad
(Iraq) and Baku (Azerbaijan) are some of the examples of such towns.
Page 103
CrackJPSC Mains Paper III Module B (Geography)
7.)Residential Towns:
8. Resorts:
The urban places which cater to the recreation needs of people are known as resorts or
recreation towns.These urban places may be based on health-giving water (hot springs),
seaside recreation, mountain climbing, cultural attractions, historical monuments,
sports facilities, national parks and attractive scenery.Resorts and recreational towns
have many hotels to accommodate visitors, and also provide sporting facilities such as
golf courses, swimming pools, trekking and skiing. Moreover, they have numerous
entertainment facilities, such as theatres, cinemas, and night clubs and children parks.
The main functions performed at transfer centres are the trade, commerce and services.
Towns which are concerned with the transfer and distribution of goods, however, have
trade as their major function.
They include several types of towns. For example, market towns, sea ports and financial
towns.Market towns are characterized by markets, a wide range of shops, stores,
warehouses, godowns, cold storages and wholesale .markets.Market towns also have
banks, insurance companies and other financial organizations. Kanpur, Ahmedabad,
Vadodara, Indore, Bhopal, Patna, Lucknow, Ludhiana and Hapur in India, Norwich in
England, Alexandria in Egypt, and Kumasi in Ghana are some of the examples of such
towns.
1. Urban Sprawl
Urban sprawl or real expansion of the cities, both in population and geographical area,
of rapidly growing cities is the root cause of urban problems. In most cities the economic
base is incapable of dealing with the problems created by their excessive size
2. Overcrowding
Page 104
CrackJPSC Mains Paper III Module B (Geography)
Overcrowding is a situation in which too many people live in too little space.
Overcrowding is a logical consequence of over-population in urban areas. It is naturally
expected that cities having a large size of population squeezed in a small space must
suffer from overcrowding. This is well exhibited by almost all the big cities of India.
The natural sequel of unchecked, unplanned and haphazard growth of urban areas is the
growth and spread of slums and squatter settlements which present a striking feature in
the ecological structure of Indian cities, especially of metropolitan centres.
4.)Overcrowding
5.)Seweage problem
Urban areas in India are almost invariably plagued with insufficient and inefficient
sewage facilities. Not a single city in India is fully sewered. Resource crunch faced by the
municipalities and unauthorised growth of the cities are two major causes of this
pathetic state of affairs.
Page 105
CrackJPSC Mains Paper III Module B (Geography)
Natural resources are useful raw materials that we get from the Earth. They occur
naturally, which means that humans cannot make natural resources. Instead, we use
and modify natural resources in ways that are beneficial to us. The materials used in
human-made objects are natural resources. Some examples of natural resources and the
ways we can use them are:
Coal Electricity
Page 106
CrackJPSC Mains Paper III Module B (Geography)
1. Land Resources: In terms of area India ranks seventh in the world with a total area of
32, 87.263 sq. km. (32.87 crore hectare). It accounts for 2.42% of total area of the world.
In absolute terms India is really a big country. However, land man ratio is not favourable
because of the huge population size.
Land utilisation figures are available for about 92.9% of total geographical area, that is,
for 3,287.3 lakh hectare. Forest constitutes 24.01 % of the total geographical area of
country. Out of a total land area of 304.2 million hectares about 170.0 million hectares
is under cultivation. Food grains have preponderance in gross cropped areas as
compared to non food grains. According to Agricultural Census, the area operated by
large holdings (10 hectares and above) has declined and area operated under marginal
holdings (less than one hectare) has increased. This indicates that land is being
fragmented.
2. Forest Resources: India’s forest cover is 78.92 million hectare which is 24.01 % of the
geographical area of the country. The per capita forest in India (0.5 hectare) is much less
than that in the world (1.9 hectares). According to the National Policy on Forests (1988),
one-third (33%) of the country’s area should be covered by forests in order to maintain
ecological balance.
3. 3. Mineral Resources :
Iron-Ore: India possesses high quality iron-ore in abundance. The total reserves of
iron-ore in the country are about 14.630 million tonnes of haematite and 10,619 million
tonnes of magnetite. Haematite iron is mainly found in Chbattisgarh, Jharkhand,
Odisha, Goa and Karnataka. The major deposit of magnetite iron is available at western
coast of Karnataka. Some deposits of iron ore arc also found in Kerala, Tamil Nadu and
Andhra Pradesh.
Coal reserves : India has the fifth largest coal reserves in the world. As on 31 March
2015, India had 306.6 billion metric tons (338.0 billion short tons) of the resource. The
known reserves of coal rose 1.67% over the previous year, with the discovery of an
estimated 5.04 billion metric tons (5.56 billion short tons). The estimated total reserves
of lignite coal as on 31 March 2015 was 43.25 billion metric tons (47.67 billion short
tons). The energy derived from coal in India is about twice that of the energy derived
from oil, whereas worldwide, energy derived from coal is about 30% less than energy
derived from oil. Coal deposits are primarily found in eastern and south-central India.
Page 107
CrackJPSC Mains Paper III Module B (Geography)
Odisha
Chhattisgarh
Jharkhand
Bauxite:
Bauxite is a main source of metal like aluminium. It is not a specific mineral but a rock
consisting mainly of hydrated aluminium oxides. It is clay-like substance which is
pinkish whitish or reddish in colour depending on the amount of iron content.
The total reserves of bauxite in India are estimated at 27.40 crores tonnes. The major
bauxite producing states in India are Orissa, Jharkhand, Gujrat, Maharashtra, Madhya
Pradesh, Karnataka, Tamil Nadu, Uttar Pradesh and Goa in a descending order of
importance.
Page 108
CrackJPSC Mains Paper III Module B (Geography)
Uranium deposits : Jaduguda in Singhbhum Thrust Belt (in the state of Jharkhand,
formerly part of Bihar) is the first uranium deposit to be discovered in the country in
1951. The Singhbhum Thrust Belt (also known as Singhbhum Copper belt or Singhbhum
shear Zone) is a zone of intense shearing and deep tectonization with less than 1km
width and known for a number of copper deposits with associated nickel, molybdenum,
bismuth, gold, silver etc. It extends in the shape of an arc for a length of about 160 km.
This discovery of uranium at Jaduguda in this belt paved the way for intensive
exploration work and soon a few more deposits were brought to light in this area. Some
of these deposits like Bhatin, Narwapahar and Turamdih are well known uranium mines
of the country. other deposits like Bagjata, Banduhurang and Mohuldih are being taken
up for commercial mining operations. Some of the other areas like Garadih, Kanyaluka,
Nimdih and Nandup in this belt are also known to contain limited reserves with poor
grades. Apart from discoveries in the Singhbhum Thrust Belt, several uranium
occurrences have also been found in Cuddapah basin of Andhra Pradesh. These include
Lambapur-Peddagattu, Chitrial, Kuppunuru, Tumallapalle, Rachakuntapalle which have
significantly contributed towards the uranium reserve base of India. In the Mahadek
basin of Meghalaya in NorthEastern part of the country, sandsyone type uranium
deposits like Domiasiat, Wahkhyn, Mawsynram provide near-surface flat orebodies
amenable to commercial operations. Other areas in Rajsthan, Karnataka and
Chattishgarh hold promise for developing into some major deposits.
Thorium
The IAEA's 2005 report estimates India's reasonably assured reserves of thorium at
319,000 tonnes, but mentions recent reports of India's reserves at 650,000 tonnes. A
government of India estimate, shared in the country's Parliament in August 2011, puts
the recoverable reserve at 846,477 tonnes. The Indian Minister of State V.
Narayanasamy stated that as of May 2013, the country's thorium reserves were 11.93
million tonnes (monazite, having 9-10% ThO2, with a significant majority (8.59 Mt;
72%) found in the three eastern coastal states of Andhra Pradesh (3.72 Mt; 31%), Tamil
Nadu (2.46 Mt; 21%) and Odisha (2.41 Mt; 20%). Both the IAEA and OECD appear to
conclude that India may possess the largest share of world's thorium deposits.
Page 109
CrackJPSC Mains Paper III Module B (Geography)
Iron reserves : Iron ore is a metal of universal use. It is the backbone of modern
civilisation. It is the foundation of our basic industry and is used all over the
world. four varieties of iron ore are generally recognized.
(i) Magnetite: This is the best quality of iron ore . It possesses magnetic property and
hence is called magnetite. It is found in Andhra Pradesh, Jharkhand, Goa, Kerala, Tamil
Nadu and Karnataka.
(ii) Haematite:
(iii) Limonite:
It contains 40 per cent to 60 per cent pure iron. It is of yellow or light brown colour.
Damuda series in Raniganj coal field, Garhwal in Uttarakhand, Mirzapur in Uttar
Pradesh and Kangra valley of Himachal Pradesh.
(iv) Siderite:
It contains many impurities and has just 40 to 50 per cent pure iron. However, due to
presence of lime, it is self fluxing.
(4) Oil reserves : India had about 750 Million metric tonne of proven oil reserves as
April 2014 or 5.62 billion barrels as per EIA estimate for 2009, which is the second-
largest amount in the Asia-Pacific region behind China. Most of India's crude oil
reserves are located in the western coast (Mumbai High) and in the northeastern parts
of the country, although considerable undeveloped reserves are also located in the
offshore Bay of Bengal and in the state of Rajasthan. The combination of rising oil
consumption and fairly unwavering production levels leaves India highly dependent on
imports to meet the consumption needs. In 2010, India produced an average of about
33.69 million metric tonne of crude oil as on April 2010 or 877 thousand barrels per day
as per EIA estimate of 2009. As of 2013 India Produces 30% of India's resources mostly
in Rajasthan.
India's oil sector is dominated by state-owned enterprises, although the government has
taken steps in past recent years to deregulate the hydrocarbons industry and support
Page 110
CrackJPSC Mains Paper III Module B (Geography)
greater foreign involvement. India's state-owned Oil and Natural Gas Corporation is the
largest oil company. ONGC is the leading player in India's upstream sector, accounting
for roughly 75% of the country's oil output during 2006, as per Indian government
estimates. As a net importer of all oil, the Indian Government has introduced policies
aimed at growing domestic oil production and oil exploration activities. As part of the
effort, the Ministry of Petroleum and Natural Gas crafted the New Exploration License
Policy (NELP) in 2000, which permits foreign companies to hold 100% equity
possession in oil and natural gas projects. However, to date, only a handful of oil fields
are controlled by foreign firms. India's downstream sector is also dominated by state-
owned entities, though private companies have enlarged their market share in past
recent years.
The Indian Strategic Petroleum Reserve (ISPR) is an emergency fuel store of total 5
MMT (million metric tons) or 36.92 MMbbl of strategic crude oil enough to provide 10
days of consumption which are maintained by the Indian Strategic Petroleum Reserves
Limited.
In the 2017-18 budget speech by the Indian finance minister Arun Jaitley, it was
announced that two more such caverns will be set up Chandikhole in Jajpur district of
Odisha and Bikaner in Rajasthan as part of the second phase. This will take the strategic
reserve capacity to 15.33 million tons.
Apart from this,India is planning to expand more strategic crude oil facilities in second
phase at Rajkot in Gujarat, Padur in and Udupi district of Karnataka.
(5) Natural gas reserves : Natural gas consists primarily of methane .Propane ,
butane, pentane and hexane are also present . KG basin, Assam, Gulf of Khambhat,
Cuddalore district of Tamil Nadu, Barmer in Rajasthan etc. are natural gas reserves of
India.
Page 111
CrackJPSC Mains Paper III Module B (Geography)
Wind energy resources : The development of wind power in India began in the
1990s, and has significantly increased in the last few years. Although a relative
newcomer to the wind industry compared with Denmark or the US, domestic policy
support for wind power has led India to become the country with the fourth largest
installed wind power capacity in the world.
As of March 31, 2016 the installed capacity of wind power in India was
26,769.05 MW, mainly spread across Tamil Nadu (7,269.50
MW), Maharashtra (4,100.40 MW), Gujarat (3,454.30 MW), Rajasthan (2,784.90
MW), Karnataka (2,318.20 MW), Andhra Pradesh (746.20 MW) and Madhya
Pradesh (423.40 MW) Wind power accounts for 14% of India's total installed power
capacity. India has set an ambitious target to generate 60,000 MW of electricity from
wind power by 2022.
Solar power : Solar power is attractive because it is abundant and offers a solution
to fossil fuel emissions and global climate change. Earth receives solar energy at
the rate of approximately 1,73,000 TW. This enormously exceeds both the current
annual global energy consumption rate of about 15 TW, and any conceivable
requirement in the future. India is both densely populated and has high solar insolation,
providing an ideal combination for solar power in India. India is already a leader
in wind power generation. In solar energy sector, some large projects have
been proposed, and a 35,000 km² area of the Thar Desert has been set aside
for solar power projects, sufficient to generate 700 to 2,100 GW.
With about 300 clear sunny days in a year, India’s theoretical solar power reception, just
on its land area, is about 5 PWh/year (i.e. = 5 trillion kWh/yr ~ 600 TW). The daily
average solar energy incident over India varies from 4 to 7 kWh/m2 with about 1500–
2000 sunshine hours per year, depending upon location. This is far more than current
total energy consumption. The India Energy Portal estimates that if 10% of the land
were used for harnessing solar energy, the installed solar capacity would be at
8,000GW, or around fifty times the current total installed power capacity in the country.
For example, even assuming 10% conversion efficiency for PV modules, it will still be
thousand times greater than the likely electricity demand in India by the year 2015.
Page 112
CrackJPSC Mains Paper III Module B (Geography)
NTPC Vidyut Vyapar Nigam(NVVN) ,the nodal agency for implementing the first phase
of JNNSM , received 418 applications against a requirement of 650 MW(500 MW Solar
Thermal and 150 MW Solar PV) for Batch I. Out of this 343 applications were for solar
PV and 55 for Solar Thermal. The interest was high in the investor community for solar
PV as applications worth 1715 MW (343*5 MW) were received as against a total of 150
MW. 30 bidders were selected through reverse bidding and projects were allocated to
companies that offered highest discount to base tariff rate of Rs. 17.91/kWh. Projects
totaling 610 MW were awarded with 145 MW under solar PV and 470 MW under Solar
Thermal. The winning bids for solar PV varied from Rs. 10.95/kWh to Rs. 12.76/kWh
and for Solar Thermal it was Rs. 11.14/kWh in Phase I Batch I. Camelot Enterprises
Private Ltd was the lowest bidder and other successful bidders included Mahindra Solar
One, Azure Power, SunEdison Energy, Lanco Infratech. The project capacity under
Batch I is 5 MW for solar PV and minimum 5 MW and maximum 100MW for Solar
Thermal. By July 2011, negotiations were concluded, PPAs awarded and financial
closure achieved for 34 projects.
Under batch II, the project size has been increased up to 20 MW and the base price for
solar PV projects is Rs. 15.39/kWh. NTPC Vidyut Vyapar Nigam (NVVN) received 154
applications for 1915 MW of solar PV projects against a requirement of 350 MW. The
results of the bidding for solar PV projects indicate that the grid parity for solar power
may not be too far off. The winning bids varied from Rs. 7.49/kWh to Rs. 9.41/kWh. The
average bid price for both batch I and II was Rs. 12.15/kWh. French project developer
Solairedirect emerged as the lowest bidder and Green Infra Solar the highest bidder.
The other successful bidders included companies like Welspun Solar, Azure Power,
SunBorne Energy and Mahindra Solar One. Around 70% and 85% of the allocated
capacity under Phase I Batch I and Phase I Batch II respectively is to be implemented in
Rajasthan.
Land is a scarce resource, whose supply is fixed for all practical purposes. At the same
time, the demand for land for various competing purposes is continuously increasing
with the increase in human population and economic growth.
Agricultural land: Agricultural land (also agricultural area) denotes the land suitable
for agricultural production, both crops and livestock. It includes net sown area, current
fallows and land under miscellaneous trees crops and groves. Agricultural land in India
totals approx. 46 % of the total geographical area in the country. This is the highest
among the large and medium-sized countries of the world. This indicates The influence
Page 113
CrackJPSC Mains Paper III Module B (Geography)
of favourable physical factors (like size, extent of plains and plateaus, etc.) and The
extension of cultivation to a large proportion of the cultivable land. But, because of the
large population of the country, the per capita arable land (i.e. land suitable for
agriculture) is low: 0.16 hectares against the world average of 0.24 hectares. About 15
per cent of the sown area is multi-cropped.
Non-agricultural land: This includes land under forests and permanent pastures,
land under other non-agricultural uses (towns, villages, roads, railways, etc.) and
land classified as cultivable waste as well as barren and uncultivated land of
mountain and desert areas.
The population continues to grow rapidly in India and great pressure is being placed on
arable land resources to provide an adequate supply of food and energy requirements.
Even if land resources are never exhausted, on a per capita basis they will decline
significantly because they must be divided among more people. Land is one such natural
resources of a nation on which the entire superstructure is created. Thus, land use is a
synthesis of physical, chemical and biological systems and processes on the one hand
and human/societal processes and behavior on the other hand. Land is important not
only for producing food stuffs, cereals, fruits and vegetables for consumption but also
for generating surpluses to meet the increasing demands created by rising population
and developing industrial sector, for laying down the transport network, communication
lines, for the construction of dwellings and public institutions, etc. Due to
unprecedented population growth, man has made uses and misuses of land resources
causing environmental degradation.
Page 114
CrackJPSC Mains Paper III Module B (Geography)
Objective questions
1. Wind
2. Natural gas
3. Solar energy
4. Soil
1. only 1
2. only 1 and 2
3. only 2 and 3
4. only 1 and 3
1. Natural gas primarily consists of Butane and methane and propane are also present in
minor amount .
2. Barmer in Rajasthan is natural gas reserve.
1. only 1
2. only 2
3. 1 and 2 both
4. Neither 1 nor 2
1. Narwapahar
2. Koraput
Page 115
CrackJPSC Mains Paper III Module B (Geography)
3. Ratnagiri
4. Balaghat
1. Only 1
2. Only 2
3. 1 and 2 both
4. Neither 1 nor 2
1. Only 1
2. Only 2
3. 1 and 2 both
4. Neither 1 nor 2
1. Limestone
2. Mica
3. Gypsum
4. All of the above
Page 116
CrackJPSC Mains Paper III Module B (Geography)
1. Only 1
2. Only 2
3. 1 and 2 both
4. Neither 1 nor 2
1. Aluminium
2. Thorium
3. Iron
4. Uranium
ANSWER KEYS
1. B
2. A
3. B
4. A
5. B
6. A
7. D
8. D
9. C
10. C
Page 117
CrackJPSC Mains Paper III Module B (Geography)
India covers an area of 32,87,263 sq km. According to area size, it is the seventh largest
country of the world after Russia, Canada, China, U.S.A., Brazil and Egypt. This vast size
itself is the most important resource. About 30 per cent of area is covered by the
mountains which are source of scenic beauty, perennial rivers, home of forests and
wildlife. About 43 per cent of land area is plain which is highly suitable for agriculture.
Remaining about 27 percent under plateaus is the store house of minerals and metals.
The land-use categories as maintained in the Land Revenue Records are as follows :
(i) Forests : In India, at present forest areas cover about 76.5 million hectares of land,
which is about 23 per cent of the total geographical area. It ranges from about 87 per
cent in Andaman & Nicobar Islands to only about 4 percent in Haryana making to range
difference of 83 percent. According to our National Forest Policy, 33% of the total
geographical area of the country should be under the forest cover to maintain ecological
balance.
(ii) Land put to Non-agricultural Uses : Land under settlements (rural and urban),
infrastructure (roads, canals, etc.), industries, shops, etc. are included in this category.
An expansion in the secondary and tertiary activitieswould lead to an increase in this
category of land-use.
(iii) Barren and Wastelands : The land which may be classified as a wasteland such as
barren hilly terrains, desert lands, ravines, etc. normally cannot be brought under
cultivation with the available technology.
(iv) Area under Permanent Pastures and Grazing Lands : Most of this type land is owned
by the village ‘Panchayat’ or the Government. Only a small proportion of this land is
privately owned. The land owned by the village panchayat comes under ‘Common
Property Resources’.
(v) Area under Miscellaneous Tree Crops and Groves(Not included is Net sown Area) :
The land under orchards and fruit trees are included in this category. Much of this land
is privately owned.
Page 118
CrackJPSC Mains Paper III Module B (Geography)
(vi) Culturable Waste-Land : Any land which is left fallow (uncultivated) for more than
five years is included in this category. It can be brought under cultivation after
improving it through reclamation practices.
(vii) Current Fallow : This is the land which is left without cultivation for one or less
than one agricultural year. Fallowing is a cultural practice adopted for giving the land
rest. The land recoups the lost fertility through natural processes.
(viii) Fallow other than Current Fallow : This is also a cultivable land which is left
uncultivated for more than a year but less than five years. If the land is left uncultivated
for more than five years, it would be categorised as culturable wasteland. (ix) Net Area
Sown : The physical extent of land on which crops are sown and harvested is known as
net sown area.
Rice
The rice is cultivated on the largest areas in India. Historians believe that while the
indica variety of rice was first domesticated in the area covering the foothills of the
Eastern Himalayas (i.e. north-eastern India).Rice is a nutritional staple food which
provides instant energy as its most important component is carbohydrate (starch). Rice
is grown in almost all the states of India. The main rice producing states are Tamilnadu,
West Bengal, Andhra Pradesh, Bihar, Jharkhand, Uttarakhand, Chhatisgarh, Punjab,
Odisha, Uttar Pradesh, Karnataka, Assam and Maharashtra. It is also grown in Haryana,
Madhya Pradesh, Kerala, Gujrat and Kashmir Valley. The rice growing areas in the
country can be broadly grouped into five regions as discussed below :
Page 119
CrackJPSC Mains Paper III Module B (Geography)
ii. Eastern Region This region comprises of Bihar, Chhattisgarh, Jharkhand, Madhya
Pradesh, Orissa, Eastern Uttar Pradesh and West Bengal. In this region rice is grown in
the basins of Ganga and Mahanadi rivers and has the highest intensity of rice cultivation
in the country. This region receives heavy rainfall and rice is grown mainly under rain
fed conditions.
iii. Northern Region: This region comprises of Haryana, Punjab, Western Uttar Pradesh,
Uttrakhand, Himachal Pradesh and Jammu & Kashmir. The region experiences low
winter temperature and single crop of rice from May-July to September-December is
grown.
iv. Western Region: This region comprises of Gujarat, Maharashtra and Rajasthan. Rice
is largely grown under rain fed condition during June-August to October - December.
v. Southern Region: This region comprises of Andhra Pradesh, Karnataka, Kerala and
Tamil Nadu. Rice is mainly grown in deltaic tracts of Godavari, Krishna and Cauvery
rivers and the non-deltaic rain fed area of Tamil Nadu and Andhra Pradesh. Rice is
grown under irrigated condition in deltaic tracts.
Wheat
Wheat is the second most important food crop of India next to rice. It is a Rabi or winter
crop. It is sown in the beginning of winter and harvested in the beginning of summer.
Normally (in north India) the sowing of wheat begins in the month of October-
November and harvesting is done in the month of March-April. This is the staple food of
millions of people particularly in the northern and north-western regions of India.
Unlike rice, wheat is grown mostly as a rabi or winter crop.
The main regions of wheat production in India are U.P., Punjab, Haryana, Rajasthan,
Madhya Pradesh, Gujrat,Maharashtra. U.P., Punjab and Haryana together produce
more than 66% of the total wheat of the country.
Cotton
Page 120
CrackJPSC Mains Paper III Module B (Geography)
Cotton requires a daily minimum temperature of 16ºC for germination and 21ºC to 27ºC
for proper crop growth. During the fruiting phase, the day temperature ranging from
27ºC to 32ºC and cool nights are needed. The sowing season of cotton varies
considerably from tract to tract and is generally early (April-May) in northern India
where it is mostly irrigated. It is delayed on proceeding to down south. It is cultivated
largely under rainfed or dryland conditions. An annual rainfall of atleast 50 centimetre
distributed through-out the growing season is required for good yield. It is mainly raised
during tropical monsoon season, although in southern India it is cultivated during late-
monsoon season in winter. The cotton-picking period from mid September to November
must have bright sunny days to ensure a good quality.
India has the largest area under cultivation and third largest producer of cotton next
only to China and the USA. Within the country two third of total area and production is
shared by four states. The main states for cotton production are Panjab, Maharashtra,
Gujarat and Haryana.
Jute
Jute is a crop of humid tropical climates. It thrives well in areas with well distributed
rainfall of 2,500 mm spread over vegetative growth period of the crop with no
cloudiness. Locations with a mean rainfall of <1,000 mm, incessant rainfall and
waterlogging are not suitable for its cultivation.
Sugercane
Sugarcane belongs to the grass family. It has a thick jointed stem, Which contains the
cane sugar, The juice can be taken as a drink or made into sugar, jaggery or khandsari. .
The by-products of sugar are very useful. Bagasse is used to make paper, cattle feed, fuel
for mills-and cardboard; molasses for power alcohol. Fertilizers, yeast and rum; and
press mud of wax. and shoe polish. It supports the pesticide and fertilizer industries.
Page 121
CrackJPSC Mains Paper III Module B (Geography)
Sugar factories provide employment to over a million 'workers. India is the second
largest sugarcane producer in the world.
Climatic and soil conditions which favour the cultivation of sugarcane are:-
Rubber
Rubber tree is sturdy, quick growing and tall. It grows on many types of soil provided
the soil is deep and well drained. A warm humid equitable climate (2 1' to 35') and a
fairly distributed rainfall of not less than 200 c m are necessary for the cultivation of
rubber crop.
Kerala (accounts for 90% of the total area under rubber), Tamil Nadu, Karnataka,
Andamanand Nicobar Islands. Parts of West Bengal. Orrisa., Maharashtra, Karnataka
and'N.E parts of India are potential regions for rubber-cultivation.
Tea
Commercial Tea plantation in India was started by the Britishers in 1923 when wild tea
plants were discovered by them in the hilly and forest areas of Assam.
Page 122
CrackJPSC Mains Paper III Module B (Geography)
Humidity: - High humidity, heavy dew and morning fog promote growth if
healthy leaves.
Rainfall: Annual rainfalI (range) 150-350cm (well distributed)
Soil- Well drained mountain soil, light, loamy, porous rich in nitrogen and iron/
laterite like the soil found in Assam
Assam is the leading producer that accounts for more than 50% of tea production of
India. Tea producing areas of Assam are the hill slopes bordering the Brahmaputra and
Surma valleys. West Bengal is the second largest producer of tea where tea is mostly
grown in the districts of Darjeeling, Siliguri, Jalpaiguri and Cooch Bihar districts. Tamil
Nadu is the third largest producer where tea growing areas are mostly restricted to
Nilgiri hills.
Coffee
Most of India’s coffee is grown in three Southern states: Kerala, Karnataka, and Tamil
Nadu, the first two account for nearly 90 percent of total production. Much of the coffee
in Kerala and Karnataka is grown in the Western Ghats, a mountain chain that runs
parallel to the coast line and about 100 miles inland from the Arabian Sea. India exports
nearly 70 percent of the coffee it produces. These exports consist mainly of high grade
beans from both the Arabica and the Robusta growing regions.
Page 123
CrackJPSC Mains Paper III Module B (Geography)
India accounts for about 2.45 per cent of world’s surface area, 4 per cent of the world’s
water resources and about 16 per cent of world’s population. The total water available
from precipitation in the country in a year is about 4,000 cubic km. The availability
from surface water and replenishable groundwater is 1,869 cubic km. Out of this only 60
per cent can be put to beneficial uses. Thus, the total utilisable water resource in the
country is only 1,122 cubic km.
Water found on the surface is called surface water. About two – third of the total surface
water flows into three major rivers of the country – Indus, Ganges and Brahmaputras.
The water storage capacity of reservoirs constructed in India so far is about 17400
billion cubic metres. At the time of independence, the water storage capacity was only
180 billion cubic metres. Hence water storage capacity has increased about ten times.
India’s average annual surface run-off generated by rainfall and snowmelt is estimated
to be about 1869 billion cubic meter (BCM). However, it is estimated that only about
690 BCM or 37 per cent of the surface water resources can actually be mobilised. This is
because (i) over 90 per cent of the annual flow of the Himalayas rivers occur over a four
month period and (ii) potential to capture such resources is complicated by limited
suitable storage reservoir sites.
It refers to all water below the water table to great depths. In the soil, both water and air
coexist in the pore spaces. A profound consequence is that the capillary water in the soil
can only be extracted by plant roots, within certain range of conditions. Ground water,
Page 124
CrackJPSC Mains Paper III Module B (Geography)
on the other hand can be extracted by humans through wells. Ground water and soil
water together constitute the lower part of the hydrological cycle. The annual potential
natural of ground water recharge from rainfall in India is about 342.43 km3 , which is
8.56% of total annual rainfall of the country.
Underground water is used on a large scale in the areas where the rainfall is
comparatively less. Underground water is used on a large scale in Punjab, Haryana,
Rajasthan, Tamil Nadu, Gujarat and Uttar Pradesh whereas Andhra Pradesh, Madhya
Pradesh, Maharashtra, Karnatake and Chhattisgarh are such states where inspite of less
rainfall, the use of underground water is less. There is a great need to develop
underground water resources here.
Evaporation and transpiration change liquid water into vapor, which ascends into the
atmosphere due to rising air currents. Cooler temperatures aloft allow the vapor to
condense into clouds and strong winds move the clouds around the world until the
water falls as precipitation to replenish the earthbound parts of the water cycle. About
90 percent of water in the atmosphere is produced by evaporation from water bodies,
while the other 10 percent comes from transpiration from plants.
The Ocean plays a key role in this vital cycle of water. The ocean holds 97% of the total
water on the planet; 78% of global precipitation occurs over the ocean, and it is the
source of 86% of global evaporation. Besides affecting the amount of atmospheric water
vapor and hence rainfall, evaporation from the sea surface is important in the
movement of heat in the climate system. Water evaporates from the surface of the
ocean, mostly in warm, cloud-free subtropical seas.
Page 125
CrackJPSC Mains Paper III Module B (Geography)
Industrial Uses
The share of industrial sector is limited to 2 per cent of the surface water utilisation and
5 per cent of the ground-water. Rough estimates indicate that the present water use in
the industrial sector is of the order of 15 km3 . The water use by thermal and nuclear
power plants with installed capacities of 40,000 MW and 1500 MW respectively, is
estimated to be about 19 km3 . The industries are needed to be switched over to water
efficient technologies.
By 2050, India expects to be a major industrial power in the world. Industry needs
water fresh or recycled. Processing industries depend on abundance of water. It is
estimated that 64 cubic km of water will be needed by 2050 A.D. to sustain the
industries. Thermal power generation needs water including a small part that is
consumptive. Taking into account the electric power scenario in 2050 A.D., energy
related requirement (evaporation and consumptive use) is estimated at 150 cubic km.
With the advent of globalization and privatization ,industrial activities water demands
share of water is changing rapidly. In addition increase in population and rapid
urbanisation also put an additional demand on water resources.
Water treatment plants for all industries emanating polluted water is the need of the
hour.
Domestic Uses
The share of domestic sector is higher (9 per cent) in surface water utilisation as
compared to groundwater.The National Water Policy has assigned the highest priority
for drinking water supply needs followed by irrigation, hydro-power, navigation and
industrial and other uses.
Page 126
CrackJPSC Mains Paper III Module B (Geography)
Million Development Goals target to halve the proportion of people without sustainable
access to safe drinking water and basic sanitation by 2015. The indicators of progress
towards this target are;
It is estimated that by 2050, water requirements per year for domestic use will be 90
km3 for low demand scenario and 111 km3 for high demand scenario. It is expected that
about 70% of urban water requirement and 30% of rural water requirement will be met
by surface water sources and the remaining from groundwater.
After independence, the Government of India gave high priority to the construction of
major irrigation related infrastructure. At present, India has a capacity to store about
200 billion cubic meters of water, a gross irrigated area of about 90 million hectares 2
and an installed hydro-power capacity of about 30,000 megawatts (World Bank, 2005)
Expansion of Irrigation facilities, along with consolidation of the existing systems, has
been the main part of the strategy for increasing production of food grains. With
sustained and systematic development of irrigation, the irrigation potential through
major, medium and minor irrigation projects has increased from 22.6 million hectares
(mha.) in 1951, when the process of planning began in India, to about 98.84 mha. at the
end of the year 2004-05.
Page 127
CrackJPSC Mains Paper III Module B (Geography)
Scarcity of water
Water scarcity is possibly to pose the greatest challenge on account of its increased
demand coupled with shrinking supplies due to over utilisation and pollution. Water is a
cyclic resource with abundant supplies on the globe. Approximately, 71 per cent of the
earth’s surface is covered with it but fresh water constitutes only about 3 per cent of the
total water. In fact, a very small proportion of fresh water is effectively available for
human use. The availability of fresh water varies over space and time.
Krishna, Cauvery, Subernarekha, Pennar, Mahi, Sabarmati, Tapi, East Flowing Rivers
and West Flowing Rivers of Kutch and Saurashtra including Luni are some of the basins,
which fall below the 1000 cubic meter mark- out of which Cauvery, Pennar, Sabarmati
and East Flowing rivers and West Flowing Rivers of Kutch and Saurashtra including
Luni facing more acute water scarcity with per capita availability of water less than or
around 500 cu m.
The need of the hour to change the condition of water scarity are as follows:-
Page 128
CrackJPSC Mains Paper III Module B (Geography)
Rain water harvesting generally means collection of rain water. Its special meaning is a
technique of recharging of underground water. In this technique water is made to go
underground after collecting rain water locally, without polluting the same.
Rain water harvesting is a low cost and eco-friendly technique for preserving every drop
of water by guiding the rain water to bore well, pits and wells. Rainwater harvesting
increases water availability, checks the declining ground water table, improves the
quality of groundwater through dilution of contaminants like fluoride and nitrates,
prevents soil erosion, and flooding and arrests salt water intrusion in coastal areas if
used to recharge aquifers.
Rainwater is relatively clean and the quality is usually acceptable for many purposes
with little or even no treatment. The physical and chemical properties of rainwater are
usually superior to sources of groundwater that may have been subjected to
contamination. Rainwater harvesting can co‐exist with and provide a good supplement
to other water sources and utility systems, thus relieving pressure on other water
sources. Rainwater harvesting provides a water supply buffer for use in times of
emergency or breakdown of the public water supply systems, particularly during natural
disasters.
Watershed management
The term watershed refers to a “contiguous area draining into a single water body or a
water course” or “it is a topographical area having a common drainage”. This means that
the rainwater falling on an area coming within a ridgeline can be harvested and will flow
out of this area thorough single point. Some refer it as a catchment area or river basin.
Page 129
CrackJPSC Mains Paper III Module B (Geography)
and judicious use of all resources – natural (like land, water, plants and animals) and
human with in a watershed.
The rainfall occurrence in different parts of India is limited to a period ranging from
about 10 to 100 days. The natural recharge to ground water reservoir is restricted to this
period only and is not enough to keep pace with the excessive continued exploitation.
Since large volumes of rainfall flows out into the sea or get evaporated, artificial
recharge has been advocated to supplement the natural recharge.
Page 130
CrackJPSC Mains Paper III Module B (Geography)
Minerals are valuable natural resources that are finite and non-renewable. The history
of mineral extraction in India dates back to the days of the Harappan civilization. The
wide availability of minerals in the form of abundant rich reserves and the ecogeological
conditions make it very conducive for the growth and development of the mining sector
in India. India is particularly rich in the metallic minerals of the ferrous group such as
iron ores, manganese, chromite and titanium. It has the world's largest reserves in mica
and bauxite.
Minerals are a valuable natural resource being the vital raw material for infrastructure,
capital goods and basic industries. As a major resource for development the extraction
and management of minerals has to be integrated into the overall strategy of the
country’s economic development. The exploitation of minerals has to be guided by
longterm national goals and perspectives. Just as these goals and perspectives are
dynamic and responsive to the changing global economic scenario so also the national
mineral policy has to be dynamic taking into consideration the changing needs of
industry in the context of the domestic and global economic environment.
Minerals are broadly divided into two groups metallic and non metallic minerals.
Metallic minerals are further subdivided into ferrous and non ferrous minerals.
Page 131
CrackJPSC Mains Paper III Module B (Geography)
Metallic minerals are minerals which contain one or more metallic elements.Metallic
minerals occur in rare, naturally formed concentrations known as mineral deposits.
These deposits can consist of a variety of metallic minerals containing valuable metals
such as nickel (pentlandite), copper (chalcopyrite), zinc (sphalerite), lead (galena) and
gold (occurs as a native element or as a minor constituent within other minerals) that
are used in all aspects of our daily lives.Metallic minerals must be broken apart and
chemically processed to extract the useful metal from the mineral.
Ferrous minerals account for about three-fourth of the total value of the production of
metallic minerals. They constitute the most important mineral group after fuel minerals.
They include iron, manganese, chromite, pyrite etc. These minerals provide a strong
base for the development of metallurgical industries, particularly iron, steel and alloys.
Iron ore
The two main types of ore found in our country are haematite and magnetite. It has
great demand in international market due to its superior quality. The iron ore mines
occur in close proximity to the coal fields in the north-eastern plateau region of the
country which adds to their advantage. Major iron ore deposits in India, distributed in
five zones designated as Zone – I to Zone-V, have been identified in the country on
commercial ground.
Most of iron ore found in the country is of three types:- Haematite, magnetite and
limonite.
Haematite ore contains up to 68 percent of iron. It is red in color and is often refered to
as 'red ore*. Next to haematite in quanitity and richness is the magnetite ore. It contains
up to 60 percent of the iron. It is dark brown to blackish in colour, and is often referred
as 'black ores', Limonite is the third type of ore which has iron content of 35-50 percent.
Zone-I group of iron ore deposits occur on the Bonai Iron Ore Ranges of
Jharkhand and Orissa States and in the adjoining areas in Eastern India,
Zone-II group comprises iron ore in Karnataka , Maharashtra , Orissa , Manipur
Tamil Nadu , Geology and Mineral Resources of India ore deposits in the 225-
km.-long north-south-trending linear belt in central India comprising the States
of Chhattisgarh and Maharashtra (East).
Zone – III deposits occur in Bellary-Hospet regions of Karnataka while the
Zone – IV deposits cover the rich magnetitic deposits of Bababudan-Kudremukh
area of the same State in south India.
Page 132
CrackJPSC Mains Paper III Module B (Geography)
Zone – V deposits cover iron ore deposits of Goa. In addition, in south India,
magnetite-rich banded magnetite quartzites occur in parts of Andhra Pradesh
near the East Coast while in Tamil Nadu good deposits of magnetite occur in
Salem district and in neighbouring areas.
Copper
Copper is malleable, ductile and a good conductor, copper and thus is mainly used in
electrical cables, electronics and chemical industries.
The Balaghat mines in Madhya Pradesh, Khetri mines in Rajasthan and Singhbhum
district of Jharkhand are leading producers of copper.Largest resources of copper ore to
a tune of 809 million tonnes (53.54%) are in the state of Rajasthan followed by Madhya
Pradesh with 287.67 million tonnes (19%) and Jharkhand with 295.96 million tonnes
(19.59%). Copper resources in Andhra Pradesh, Gujarat, Haryana, Karnataka,
Maharashtra, Meghalaya, Nagaland, Odisha, Sikkim, Tamil Nadu, Uttarakhand and
West Bengal accounted for remaining 7.87% of the total all India resources.
Bauxite
Bauxite is a non-ferrous metallic mineral. It is the ore from which aluminium metal is
produced. Aluminium extracted from the ore is used in making aeroplanes, electrical
appliances and goods, household fittings, utensils etc. Bauxite is also used for
manufacturing of white colour cement and certain chemicals. India's reserves of bauxite
of all grades have been estimated at 3037 million tonnes.
The deposits in AP and Orissa (Eastern Ghats) with a total reserve of about 1650 Mt
constitute one of the largest bauxite deposits in the world. Orissa continues to be the
leading state accounting for 59% of the total production of the country. is also rich in
deposits. It occurs in the high hilltops of the Chhotanagpur plateau as residual deposits.
Page 133
CrackJPSC Mains Paper III Module B (Geography)
Bauxite occurs as segregated sheets, pockets, patches and lenses within laterite cappings
over the traps and gneisses. Extensive deposits of bauxite are found in the western
Chhotanagpur plateau area falling in and districts and adjoining district.
Manganese
Manganese is an important raw material for smelting of iron ore and also used for
manufacturing ferro alloys. Karnataka has the largest recoverable reserves (64.55
million tones) of manganese ore in the country. Managanese ore minerals occur in close
association with haematite and carbonates as stratiform, lenticular, patchy or pockety
deposits of varying dimensions, within various greenstone belts. Andhra Pradesh
contributes about 90% of the manganese ore production in the country. The manganese
ore here is mainly associated with kodurites of the Khondalite Group in Eastern Ghats
and Penganga beds in the Pakhal Basin. Orissa accounts for one third of the country’s
annual production of manganese and possesses the second largest recoverable
manganese reserve in the country i.e. 50.36 million tonnes of all grades, next to that of
Karnataka. Manganese ores are mined in Singhbhum district in between Noamundi and
Gua and from south of Chaibasa.
Page 134
CrackJPSC Mains Paper III Module B (Geography)
[su_heading size="21"]Coal[/su_heading]
Coal in India occurs in two important types of coal fields. They are the Gondwana coal
fields and Tertiary coal fields. Out of the total coal reserves and production in India,
Gondwana coal fields contribute 98% and the rest 2% is produced by tertiary coal fields.
The Gondwana coal fields are located in the sedimentary rock systems of lower
Gondwana Age. They are distributed chiefly in the valleys of the Damodar (Bihar
- West Bengal); the Son (Madhya Pradesh); the Mahanadi (Orissa), the Godavari
(Andhra Pradesh) and the Wardha (Maharashtra).
Tetiary coalfields occur in the extra-peninsular areas which include Assam,
Meghalaya, Nagaland, Arunachal Pradesh, Jammu & Kashmir and Sikkim
Most of the petroleum occurrences in India are associated with anticlines and fault traps
in the rock formations of the tertiary age. In regions of folding, anticlines or domes, it
occurs where oil is trapped in the crest of the upfold. The oil bearing layer is a porous
Page 135
CrackJPSC Mains Paper III Module B (Geography)
limestone or sandstone through which oil may flow. The oil is prevented from rising or
sinking by intervening non-porous layers.
Petroleum is also found in fault traps between porous and non-porous rocks. Gas, being
lighter usually occurs above the oil. About 63 per cent of India’s petroleum production is
from Mumbai High, 18 per cent from Gujarat and 16 per cent from Assam.
1. Uranium
2. Monazite
3. Ilmenite
4. Rutile
5. Zircon
Thorium is principally obtained from monazite. The beach sands of Kerala in Palghat
and Quilon district contain the world’s richest monazite deposits. It also occurs on the
sands of Visakhapatnam in Andhra Pradesh.
Page 136
CrackJPSC Mains Paper III Module B (Geography)
Non-Conventional energy resources could minimise the transmission cost and energy
divide between the remote locations
[su_heading size="21"]Solar[/su_heading]
Indian has a unique geographical location in the tropical climate which enables it
with high solar radiation intensity throughout the year.
Solar radiation which we receive as heat and light can be converted to useful
thermal energy or for production of electricity either through solar photovoltaic
route or through solar thermal route.
Sky is clear with abundant sunlight for about 300 days a year
Solar insulation is greater than 4-7 kwh per square per metre per day for the
nation.
solar energy could be used as heat energy or could be converted into electricity
through photovoltic cells
National Solar Mission
Page 137
CrackJPSC Mains Paper III Module B (Geography)
[su_heading size="21"]Wind[/su_heading]
Wind can be used as a source of energy in those regions where strong and
constant winds blow throughout the year. Wind energy can be used for pumping
water for irrigation and also for generating electricity. India has about
45,000MW estimated wind power potential. Prospective sites for generating
electricity wind have been located in Tamil Nadu, Gujarat, Andhra Pradesh,
Karnataka and Kerala. The potential that can be tapped at present is limited to
around 13,000 MW. But at present 2,483MW is generated through wind which
places India in the fifth position globally after Germany, USA, Denmark and
Spain.
The rivers originating from the northern mountainous region are the most important
source of the generation of Hydroelectricity . They have their sources in glaciers and
snowfields, therefore, they are perennial and their flow of water is regular throughout
the year. Velocity of flow is high because of dissected terrain and the competition for use
of water for other purposes is low.
The northeastern part of this mountainous region, constituting the Brahmaputra basin,
has the largest power generating potential. The Indus basin in the northwest is at second
place. The Himalayan tributaries of the Ganga have a potential of 11,000 MW. Thus,
three-fourths of the total potential is confined in the river basins originating from the
northern mountainous region.
The rivers of peninsular India are comparatively poor in this respect. They depend
entirely on the rainfall for their flow, and therefore, their flow is very erratic
exceptionally high flow during the monsoon period fol1owed by a long period of lean
flow
Page 138
CrackJPSC Mains Paper III Module B (Geography)
Based on the value addition and tangibility broadly we can have three types of industries
- primary industries,secondary industries and tertiary industries.
Primary industries are usually very simple industries involving processing of raw
materials to give input goods for secondary industries.
Here value addition is usually minimal and they are
usually material oriented.Scale of operation may be small or may be very
large.Examples are: coal mining and washing, oil-refining,flour milling, metal
smelting, stone crushing, etc.
Secondary industries are very complex and diversified which took input from
primary industries and add significant value to it in different processing stages.
The value additions are so significant that they may have a locational preference
in favour of market.Secondary industries may again divided into heavy
industries, light industries, footloose industries, etc.
a) Heavy industries are identified by nature of their bulkyproduct or very high capital
inputs or units which mayhave high capacity to influence environment
adversely.Examples are: heavy chemical, heavy machinery,locomotive, shipbuilding,
heavy electrical, etc.
b) Light industries are less capital intensive and moreinclined to consumer products.
Products are usually lighter in weight, require lesspower, less polluting and can be
established in small areas.
c) Footloose industries are those industries which nearly remain indifferent with
locational aspects of plant.Their products are having very high value addition and
smaller in size and so transportation cost is only a small fraction of total cost.These
industries usually requires a very small production space, are usually less polluting and
butrequires highly skilled workers.Examples are: watch, camera, diamond
cutting,precision electronics, etc.
Page 139
CrackJPSC Mains Paper III Module B (Geography)
Tertiary industries are not related to production process.They are basically trade and
services providing industries.The scale of operation is so large that it is regarded as an
industry.Examples are: banking industry, insurance industry, consultancy industry, etc.
Although iron and steel manufacturing activity in India is very old, modern iron and
steel industry started with the establishment of ‘Bengal Iron and Steel Works’ at Kulti in
West Bengal in 1817. Tata Iron and Steel company was established at Jamshedpur in
1907. This was followed by ‘Indian Iron and Steel plant’ at Burnpur in 1919. All the three
plants were established in the private sector. The first public sector iron and steel plant,
which is now known as ‘Visvesvarayya Iron and Steel works’, was established at
Bhadrawati in 1923.
After independence a great focus was given for self dependence and investments were
made in heavy industries. Three new integrated steel plants were established at
Rourkela, Bhilai and Durgapur. Bokaro steel plant was established under public sector
in 1964. Bokaro and Bhilai plants were set up with the collaboration of the former Soviet
Union. Durgapur steel plant was set up in Collaboration with United Kingdom while
Rourkela plant was established with the help of Germany.
The change in the spatial pattern of this industry is linked to the change in patterns of
consumption, production and exchange of goods and services. This is dependent on the
spatial organization and location of economic, transportation and communication
systems that produce and facilitate the trade of the concerned commodities.
Page 140
CrackJPSC Mains Paper III Module B (Geography)
The industrial development in India began with the establishment of first successful
modern cotton textile mill at Mumbai in 1854.Traditional cotton textile industry could
not face the competition from the new textile mills of the West, which produced cheap
and good quality fabrics through mechanized industrial units. Majority of cotton textile
mills are still located in the cotton growing areas of the great plains and peninsular
India.
India is the second largest producer of sugar in the world after Brazil and is also the
largest consumer. Today Indian sugar industry’s annual output is worth approximately
Rs.80,000 crores.Most of the sugar mills are concentrated in six states, namely Uttar
Pradesh, Bihar, Maharashtra, Tamil Nadu, Karnataka and Andhra Pradesh.
Over the period, sugarcane industry is gradually shifting from north Indian states to
states in Peninsular India. Some of the important reasons are as follows:
2) The sucrose contents is higher in the tropical variety of sugarcane grown in the south.
5) Most of the mills in Peninsular India are in cooperative sector, where profit
maximization is not the sole objective
Page 141
CrackJPSC Mains Paper III Module B (Geography)
offshore crude oil production was about 50.2%. The remaining crude oil production was
from 6 States viz., Andhra Pradesh (0.7%), Arunachal Pradesh (0.2%), Assam (12.1%),
Gujarat (12.5%), Rajasthan (23.7%) and Tamil Nadu (0.6%).
Besides Vadodara, Gandhar, and Hazira in Gujarat and Nagathone in Maharashtra are
other important centres of petro-chemical industry. India is self sufficient in the
production of petrochemicals.
Weber's main point was that the cost of transport (another theory on this) determined
the location of industry. Therefore, he uses Von Thunen's idea (that the cost of transport
determines crop selection) and applies it to industry. Similar to Von Thunen, the weight
of the raw materials and the weight of the end product (this difference is known as the
material index) will determine the site of production depending upon how much the
industry is willing to pay to get its product to the market (connecting to Christaller's
ideas of market area). Weber's theory rest primarily on four such sites, what he calls
industrial orientations
Material orientation
Labor orientation
Transport orientation
Market orientation
He analyzed the factors that determine the location of industry and classified these
factors into two divisions. These are:
(ii) Secondary causes (agglomerative and deglomerative factors) that are responsible for
redistribution of industry.
The three locational factors explained by weber in his theory of industrial location are:-
Transport cost
labour cost
agglomeration economies
Weber uses the location triangle within which the optimal is located based on the three
locational factors.
Page 142
CrackJPSC Mains Paper III Module B (Geography)
Geological history
The spatial extent of Jharkhand State is approximately 21° 55’ to 25° 35’ North Latitude
and 83° 20’ to 88° 02’ East Longitude. The state is land locked and it shares its
boundary with Orissa on the southeast, Chattisgarh on the southwest, Bihar on the
north, West Bengal on the east and Uttar Pradesh on the northwest. It comprises of the
Chotanagpur Plateau, which forms a part of Deccan bio-geographic province. It is a hilly
undulating plateau characterized by predominantly tropical forests and tribal
settlements. The State is endowed with natural resources that need to be conserved and
utilized in a sustainable manner for all-round development of the state in general and
the marginalized tribal population in particular.
The total geographical area of the State is 79.70 lakh hectares, out of which 23.22 lakh
hectares (29.33%) are under forests; 5.66 lakh hectares (7.12%) are barren lands; 7.24
lakh hectares (9.10%) are put to non-agricultural use; 0.90 lakh hectares (1.15%) are
under pastures & other grazing lands; 3.07 lakh hectares (3.86%) are cultivable
wastelands; 0.88 lakh hectares (1.11%) are under miscellaneous trees and groves; 12.04
lakh hectares (15.14%) are current fallows; 8.45 lakh hectares (10.63%) are under other
fallows; and 17.95 lakh hectares (22.58%) are the net sown area. The number of
electrified villages is 14667 (45.0 per cent of the total villages). 26.0 per cent (8484) per
cent of the total villages are connected by roads. The lengths of the National Highways
and the State Highways are 1006 and 4662 kms respectively. The state has different
relief because of its physiography as it consists of four series of plateaus of having
different heights. The highest plateau lies in the west known as Western or Higher
Ranchi Plateau or locally known as the Pat region located at 2500 to 3600 feet above sea
level covering northern part of the old Ranchi district and the southern edge of the old
Palamu district. The term Pat represents a feature similar to a table with steep edges
Page 143
CrackJPSC Mains Paper III Module B (Geography)
around and a flat top. It is full of dissected hills having a hill station, Netarhat, at the
top. The second plateau is known as Ranchi Plateau having a height of 2000 feet
composed of gneisses and granites. It is separated by the Damodar trough from the
Hazaribagh Plateau. The next plateau is Lower Chotanagpur Plateau consisting mainly
of gneisses and granite and partly of schists and other Dharwar rocks.
The other plateaus are the Rajmahal Hills and the Kaimur Plateau. These plateaus are
separated by the narrow and steep slopes known as scarps. It is believed that before the
Chotanagpur Peneplain was successfully uplifted thrice by the side effect of the three
violent Himalayan movements in Tertiary times continued till Pleistocene times
resulting in well-known waterfalls like Hundru, Jonha, etc. on the scarps. The first
upliftment took place during the Eocene to Oligocene period creating Pat region, the
second one during Miocene forming the Ranchi and Hazaribagh Plateau and the third
one during Pliocene and Pleistocene period uplifting the outer Chotanagpur Plateau. All
plateaus are the parts of the same plain successively uplifted during Tertiary and
Pliestocene times. Marvelous eye catching rare geological/geomorphological features
like rejuvenated meandering and deep cutting young rivers like Damodar are the
uniqueness in the State. It is rate because of combination of senility with the character
of young rivers. The state has the luxuriant forests and lush green rolling seasonal
meadows. Magnificent undulating hills and valleys are the special attraction. The golden
river ‘Swarnarekha’ adds melody in the pristine environment along the course. A
combination of table-top flat lands and the peneplain with dome shaped exfoliating
hillocks resembling like inverted Nagara (drum) are spread over the state. Further, the
Tors or the balanced diamond shaped rocks are also present wonderful nature of the
state. The state is one of the largest producers of the mineral resources of the country
spreading over majority of the districts with a paradox to be among the bottom lying
states in terms of development. An area of 24.4 lakh hectares (30.61%) is under
agricultural wastelands that have to be beneficially utilized for rural development.
Page 144
CrackJPSC Mains Paper III Module B (Geography)
Landforms
Jharkhand is located in the eastern part of India bordering the states of Bihar, West
Bengal, Orissa, and Chattisgarh. Tropic of Cancer passes through Kanke, few kilometers
away from Ranchi, the capital of Jharkhand, making it the only state in India touched by
Tropic of Cancer. Most of the Jharkhand region is part of Chotanagpur plateau, which
also extends to some parts of West Bengal, Chattisgarh, and Orissa. This region is made
up of ancient stone Arkiyan Granite Tatanis.
The most prominent physical feature of Jharkhand is the Chota Nagpurplateau, part of
the vast Deccan plateau that occupies most of peninsular India. Chota Nagpur, actually a
series of plateaus, hills, and valleys, covers nearly the entire state and consists primarily
of crystalline rocks.
The main plateaus, Hazaribag and Ranchi, are separated by the faulted sedimentary
coal-bearing basin of the Damodar River, and they average about 2,000 feet (610
metres) in elevation. In the west there are more than 300 dissected but flat-topped
plateaus (called pats), many with elevations of more than 3,000 feet (900 metres).
The highest point in Jharkhand is formed by the conical granite peak of Parasnath,
which rises to 4,477 feet (1,365 metres) on the Hazaribag plateau; it is sacred in
the Jain religion and to the Santhal people. Lowland plains flank the plateaus in the
northwestern and northeastern parts of the state.
Page 145
CrackJPSC Mains Paper III Module B (Geography)
Drainage System
The radial centrifugal drainage system of Jharkhand state has number of rivers. Most of
these rivers remain relatively dry during summer months (February-May) but exhibit
torrential flow during the months of monsoons (June-September). Jharkhand has a vast
potential for generating hydel power as is exemplified by the location of the famous
Damodar Valley Corporation in the state.
North Koel river, originating from the plateau of Ranchi, flows towards north
and ends in river Sone. flows in the Western portion of Palamau district and falls
in the river Sone. Plamau district is considered rain shadow area and has very
few rivers.
South Koel river, originating from central part of Chotanagpur and ends in
river Shankh.
Barakar river originates from North Chotanagpur and passes through Giridih
district. Tillaiya dam is built over this. It is the first Dam and hydro - Electric
power Station constructed by Damodar Valley Corporation across Barakar river
in Hazaribag district.
Damodar river originates from Chandwa village of Palamu and is famous for
distraction. Once called "sorrow of Jharkhand and Bengal" due to floods
devastating vast areas, it has been turned into a blessing after construction of
several dams and hydro-electric gerating facilities by the Damodar Valley
Corporation (DVC).
Swarnarekha river also originates from plateau of Chhotanagpur. Gold
particles are found in its sand. It flows towards Orissa.
There are three main rivers in district Pakur namely Bansloi, Torai & Brahmini.
Bansloi & Torai Rivers flow in the middle and Brahmini flows in the southern
part of the District pakur.
Kanchi river- DASSAM FALLS -About 40 km. away from Ranchi on Tata Road
falls a village named Taimara near which flows the Kanchi river.
Phalgu river, Sankari, Panchane-origin-North Chhota Nagpur
The Sankh river is located near Rajendra village in District Gumla in Bihar.
The general line of drainpipe is from south to north towards the SON, which forms parts
of the northern boundary .The principals rivers are Koel and its tributaries, the Auranga
and the Amanat. There are also last of smaller streams, most of which are mere
mountain torrents which rock–strewn beds. The Koel Auranga and Amanat are similar
Page 146
CrackJPSC Mains Paper III Module B (Geography)
in this respect for their upper reaches are characterized by high banks Generally rugged
and occasionally precipitous with a rapid stream dashing over boulders and shingle or
gliding. Calmly, except in time of spate, in shadow parts terminated by rocky barriers.
Further north these rivers have deep sandy beds, into which the water sinks out of sight
in the hot weather, percolating through the soft sand. Until some outcrop of rock
arrests its course and forces it to the surface.
Other Rivers: Roro, Mayurakshi, Sanjay, Son, More, Karo, Bansloi, Kharkai, Ganga,
Gumani, Batane.
Most of the state lies on the Chhota Nagpur Plateau, which is the source of the Koel,
Damodar, Brahmani, Kharkai, and Subarnarekha rivers, whose upper watersheds lie
within Jharkhand. Much of the state is still covered by forest. Forest preserves support
populations of tigers and Indian elephants.
Climate
The state falls under the Tropical Monsoon climatic region. The Tropic of Cancer cuts
across the state passing through the middle of the Ranchi City. The average temperature
of the state is 25° C, which varies greatly because of varying heights of different plateaus
mentioned above. The average temperature of the Pat region is below 23° C while rest of
the state records average annual temperature between 23 and 26° C except the eastern
part of Santhal Pargana region, East Singhbhum, Garhwa, Palamu and the northern part
of Chatra districts where it is above 26° C. There are extremities in climate in the state in
two seasons- summer and winter.
The hottest areas are found towards the north western part of the state (Daltonganj),
around Jamshedpur and Dhanbad cities having more than 40° C temperatures.
Similarly, the state gets affected by the cold waves with less than 5° C temperature and
reeling cold. The average annual rainfall in the state is 1400 mm with more than 4/5th
rainfall between June to September. It also gets rainfall from the branch of monsoon
from the Arabian Sea. There are also variations in rainfall varying from below 1200 mm
to 1800 mm.
Page 147
CrackJPSC Mains Paper III Module B (Geography)
One, North Eastern and North Central Plateau Region (Western part of Santhal Pargana
region, Giridih, Kodarma and Northern Hazaribagh);
two, Upper Chotanagpur region (Pat region, Ranchi Plateau, Gumla and the plateau
region of outer Chotanagpur spread in Simdega);
three, South Eastern Region (East Singhbhum, Saraikela and West Singhbhum);
four , Eastern Region (Sahibganj, Pakur, eastern Deoghar, eastern Jamtara and north
eastern part of Saraikela); and
Soil types
Soil is one of the most important non-renewable basic resources on the earth surface.
Therefore greater attention has been paid through out the world to study the soils, their
distribution and extent, behavior, potentials and problems and their suitability for
sustained use for different purposes. Jharkhand state lies between 21o 58’2” to 25o
8’32” North latitude and 83o 19’05”to 87o 55’03” East longitude covering an area of
nearly 7.97 m.ha. and accounted for nearly 2.4 per cent of Total Geographical Area
(TGA) of the country. It is bounded on the east by West Bengal, on the west by
Chhattisgarh, on the north by Bihar and on the south by Orissa. Soil fertility is an aspect
of the soil-plant relationship. Fertility status of the soils is primarily and importantly
dependent upon both the macro and micronutrient reserve of that soil. Continued
removal of nutrients by crops, with little or no replacement will increase the nutrient
stress in plants and ultimately lowers the productivity. The fertility status of the soils
mainly depends on the nature of vegetation, climate, topography, texture of soil and
decomposition rate of organic matter. Optimum productivity of any cropping systems
depends on adequate supply of plant nutrients. GIS is a versatile tool used for
integration of soil database and production of a variety of users specific and user-
friendly interpretative maps. This further leads to accurately and scientifically interpret
and plan some of the aspects like conservation of organic matter, soil reaction (pH)
control and fertilization. Three soil orders namely Entisols, Inceptisols and Alfisols were
observed in different districts of Jharkhand. Alfisols are the dominant soils covering
54.0 per cent of TGA followed by Inceptisols (24.4%) and Entisols (19.4 %). Vertisol is
only present in Pakur district to an extent of 0.6 per cent of TGA of the district.
Page 148
CrackJPSC Mains Paper III Module B (Geography)
Red soils are common and found all over the granite and geneissic plateau surface.
These soils are mostly observed in a catenary sequence. The soils of upland are usually,
shallow to medium depth, reddish in colour, low base exchange capacity, acidic in
reaction (5.0 to 5.6) poor in fertility status, well to excessively drained, prone to erosion
with low water holding capacity and high permeability. The soils become heavier in
texture down the catena and down the profile, colour changes from reddish yellow to
yellow and yellowish grey. In lowland (Don soils) soils are grey almost neutral in
reaction, high clay content and high fertility status. The upland soils are generally Lithic
Haplustalfs, Rhodustalfs and medium sloped soil (Haplustalfs and Typic paleustalfs).
Jharkhand soil in general, are low to very low in available phosphorus and sulphur,
medium in available nitrogen & potassium status and deficient in available boron.
Forests
Jharkhand’s Geography: Forests
Jharkhand with a geographical area of 79,714 km2 constitutes 2.42% of the country's
area. The total recorded forest area of the state is 23,605 km2 which is 29.61% of the
geographical area of the state. Of the total recorded forest area, Reserved Forests
constitute 18.58%, Protected Forests 81.28%, and Unclassed Forests 0.14%. As per State
of Forest Report of Forest Survey of India, forest cover in the state is 22,977 km2 which
is 28.82% of the state's geographical area. The total forest and tree cover put together, it
constitutes about 32.48% of the geographical area of the state against the national
average of 23.81%. The recorded forest area of the state is about 2.36 million hectares
which constitutes 29.61 % of the geographical area of the state. By legal status, Reserve
Forests constitute 18.59%, Protected Forests 81.27% and Unclassed Forests a mere
0.14%.There are three forest types viz., Tropical Moist Deciduous, Tropical Dry
Deciduous, and Subtropical Broad leaved Hill Forests, Sal (Shorea robusta) being the
major forest tree species. The Chhotanagpur Plateau is very rich in its flora and fauna.
Jharkhand ranks 10th among all the States and Union Territories of India considering
the geographical area under forest cover. The dense forest distributed in the northwest
and the southeast of the State constitutes about 15%, the open forest areas are evenly
distributed in the north, central and south-eastern parts of the State and constitute
about 13.6% of the forested area whereas the non-forested area is about 71.6% of the
Page 149
CrackJPSC Mains Paper III Module B (Geography)
state’s geographic area. The total recorded forest area is about 23,605 sq km which
contains reserve forest of about 18.6%, protected forest of 81.3% and unclassified forest
about 0.1% (Ministry of Environment and Forest 2001). The main forest types in the
state are:
State constitutes of One National Park and ten Wildlife Sanctuaries, devoted to in situ
conservation of wildlife. They cover 0.21 million hectares, i.e., 2.63% of the state's total
geographical area and 9% of the recorded forest area. In addition, there is one Biological
Park, at Chakla (Ormanjhi), one Deer Park at Kalamati and one Crocodile Breeding
Centre at Muta, all in Ranchi District, devoted to ex situ conservation of wildlife as well
as for serving as centres for sensitizing people for conservation of wildlife resources of
the state and the country at large. The state is implementing two national research-cum-
conservation projects viz., the Project Tiger since 1973-74 for in situ conservation of the
Indian Tiger and the Project Elephant since 1991-92 for conservation of viable
populations of wild Asiatic Elephants and their habitats. Under these conservation
projects, special management units of the Palamau Tiger Reserve and the Singhbhum
Elephant Reserve have been created.
Page 150
CrackJPSC Mains Paper III Module B (Geography)
Based on the forest canopy density classes, the forest land of Jharkhand can be classified
under three broad categories, 2,590 Km2 is classified as very dense forest, 9,917 km2 as
moderately dense and remaining 10,470 km2 as open forest (Forest Survey of India,
2011). Due to the efforts by the state forest department, the quality of the forest in the
state has improved. There has been an increase of 18 km2 in the moderately dense forest
and 65 km2 in open forest. The estimated tree cover in the state (estimated using TOF
inventory data collected over a period of six years, i.e. 2004-10) is 2,914 km2 which is
3.66% of its geographical area (Forest Survey of India, 2011).
The forests at Jharkhand are home to the rich biodiversity within the territory of
Jharkhand. Some of the major animals found in the forests of Jharkhand are:
Jackal
Tiger
Elephant
Sambhar
Fox
Wild boar
Python
Blue bull
Rabbit
Honey badger
Squirrel
Mongoose
Malabar giant, etc.
Furthermore, the flora of the forests at Jharkhand also contributes towards the
enhancement of the tourism industry at Jharkhand. Among the important trees in
Jharkhand are sal, bamboo, mango, jackfruit, kendu, katha, gambhar, jamun, harhe,
mahua, shisham, sagwan, baheda, etc.
It is noteworthy in this context that the forests in Jharkhand fall under the Ministry of
Forest and Environment. In fact, the Ministry of Forest and Environment in Jharkhand
takes care of the Jharkhand forests. The Department of environment and forests at
Jharkhand basically deal with the following:
Page 151
CrackJPSC Mains Paper III Module B (Geography)
Conservation of Forest
Control of Forest Development and Corporation
Conservation of Wild Animals and Birds
Protection of the Environment
Conservation of Environment
Formulation of Rules and Planning of Human Habitation in Jharkhand
Environment Research and Education
Biological Parks Management, etc.
Agriculture
The State of Jharkhand was created in November' 2000 after carving 79 lakh hectares
geographical area from the State of Bihar for better planning and execution of
development activities of a ecologically different zone ( Hills & Plateau region compared
to Bihar plains).
Agriculture is the main stay for the 80% of rural population of the state. Agriculture is
their employment and primary income generating activity. The agricultural economy of
the Jharkhand state is characterized by dependence on nature, low investment ,low
productivity, mono-croping with paddy as the dominant crop , in inadequate irrigation
facilities and small ands marginal holdings. The dependence of agriculture on the
Vagaries of the rain-god can be gauged from the fact that as much as 92% of the total
cultivated area is unirrigated.
The cultivable land resources of the state have good potential for higher production of
horticulture and forest products. The soil is young and has high capacity of fixation of
humus. The forest provides sufficient biomass to feed its soiling. However, Soil erosion
and failure to recycle the biomass is depleting the soil fertility. Hence, a judicious oil,
water and land management is required only that can improve agriculture productivity.
Despite the fact that the state has a good rainfall, the surface water availability to
agriculture is not sufficient due to inadequate storage facilities etc. as far as the status of
ground water is concerned, it is also in the poor state due to little recharging of ground
water by natural process in absence of artificial recharging facilities, as a result, the
water label in the plateau is going down.
Presently, the availability of water resource is only 287810 lakhs m3, out of which
237890 lakh .m3 is from surface water and rest 49920 lakh m3 is from ground water.
The total utilization of surface and ground water in the state for irrigation purposes so
far is only 47360 lakh m3 out of which 39640 lakh m3 is surface water and 7720 lakh
m3 is ground water. For all round agricultural development, technology must be
Page 152
CrackJPSC Mains Paper III Module B (Geography)
Agriculture growth has a strong bearing on the growth of other sectors of the economy
and consequently, the SGDP of the State. The State agriculture economy is characterized
by the existence of a large number of small and marginal farmers. Nearly 83% of
operational holdings are below 2.0 hectare, with 0.69% of holdings above 10 hectares
which covers 9% of cultivable area. Jharkhand has made significant progress in
agriculture production in last two years. Approximately 85% of cultivated area is under
different food crops as against 65% area at the National level. Rice is the major food
grain crop of the State covering approximately 80% of the total cropped area. The paddy
production has reached approx.4695 thousand tones sown over 1469 thousand hectares
with a productivity of 3197 kgs./ha. Other important crops grown are maize, pulses,
wheat, oilseeds and minor millets.
Page 153
CrackJPSC Mains Paper III Module B (Geography)
Irrigation
The dams in Jharkhand mainly cater to the irrigation system of the state through a well
managed system of canal irrigation in the local areas. The dams of Jharkhand are also
utilized for power generation. The major dams of Jharkhand are the Maithon dam, the
Panchet Dam and the Chandil Dam.
The Maithon Dam was constructed on River Barakar near Dhanbad in the state of
Jharkhand. The Maithon Dam is the largest reservoir in the Damodar valley and is the
first underground power station in the entire Southeast Asia. The dam measures 15, 712
feet in length and 165 meters in height.
Being the biggest reservoir in the Damodar Valley Corporation, the Maithon Dam is
located 52 km from Dhanbad. Initially the objective to build this dam was flood control,
but eventually it served the purpose of Hydel electric power generation as well as a
tourist spot. The Maithon Power Station generates around 60,000 KWs of electricity. A
lake is adjoined to the dam, which is spread over an area of 65 square kilometers. The
lake offers recreational facilities like boating and fishing and on an island in the lake is a
rest house which provides accommodation to several tourists.
An underground power station installed at the Maithon Dam is the first of its kind in
South East Asia. The dam has thrived as a tourist destination for the past years, owing to
the adjacent deer park, bird sanctuary and the Kalyaneshwari Temple. The nearest
railhead of Maithon Dam is at Barakar, lying 8 kilometers away. Regular buses ply from
Dhanbad, Barakar and Asansol, and it hardly takes an hour to reach this beautiful dam
from these areas.
The Chandil Dam which stands on the Subarnarekha River is a wonderful tourist
attraction. This dam is thronged by several tourists throughout the year. A museum
located near the Chandil dam has 2000 years old scripts inscribed on rocks.
A part of Damodar Valley Corporation, Panchet Dam is known to be one of the most
important hydel power stations, with a generating capacity of 40 MV power. The dam is
22,155 feet long and 134 feet high and is built across the Damodar River. The dam is
located in the Dhanbad District of Jharkhand.
In the recent times the dam is becoming an important place of tourist attraction. An
inspection bungalow, supervised by the Damodar Valley Corporation, caters to the
accommodation needs. Kumardubi Railway Station lies almost 10 kilometers away and
is the nearest railhead. Bus services are available from Barakar, Maithon, Asansol and
Dhanbad (50 kilometers) to reach the Panchet Dam.
List of Dams:
Page 154
CrackJPSC Mains Paper III Module B (Geography)
Page 155
CrackJPSC Mains Paper III Module B (Geography)
State: Jharkhand
River Name: North Karo
Basin: Brahmani and Baitarni
Type of Dam: Earthen
Purpose of Dam: Irrigation
Year of Completion: 1988
Page 156
CrackJPSC Mains Paper III Module B (Geography)
Page 157
CrackJPSC Mains Paper III Module B (Geography)
Page 158
CrackJPSC Mains Paper III Module B (Geography)
District: SARAIKELA
State: Jharkhand
River Name: Ranka Jhuria
Basin: Ganga
Type of Dam: Earthen
Purpose of Dam: Irrigation
Year of Completion: 1987
Page 159
CrackJPSC Mains Paper III Module B (Geography)
Its total length from its source in the hills of Chota Nagpur plateau in Jharkhand to its
confluence with Hugli in West Bengal is about 541 km, half of which is in Jharkhand and
the remaining half is in West Bengal.
It takes a southerly turn from Bardhman town and joins river Hugli about 50 km
upstream from Kolkata. The Damodar valley covers an area of 24,235 sq km in
Jharkhand and West Bengal. Bokaro, Barakar and Konar are its important tributaries.
The Damodar River was termed River of Sorrow or Sorrow of Bengal and even Sorrow of
the Region. Its notoriety was demonstrated by the devastating floods in 1823, 1848,
1856, 1859, 1863 1882, 1890, 1898, 1901, 1905, 1907, 1913, 1916, 1923, 1935 and 1943.
While major floods occur at intervals, minor floods are experienced almost every year.
The sediments brought by the Damodar create the problem of sedimentation in the
Hugly which in turn endangers the Kolkata port.
In order to control floods and other related problems, the Central Government, in
consultation with the state governments of erstwhile Bihar and West Bengal, worked out
a unified development project for the Damodar Basin. The Damodar Flood Enquiry
Committee suggested a comprehensive plan. This plan was based on the memorandum
submitted by W.L. Voorduin, an engineer with the Tennesse Valley authority (TVA) in
the USA. The Damodar Valley Corporation (DVC) was established on 18th February,
1948 to execute the Damodar Valley Project.
The original plan was to construct seven major dams. These dams were to be Aiyar and
Panchet Hill on the Damodar river; Maithon, Belpahari and Tilaiya on the Barakar river;
Konar on the Konar river and Bokaro on the Bokaro river. But the DVC has constructed
only four dams (Tilaiya, Maithon, Konar and Panchet Hill). These dams are briefly
described as under :
1. Tilaiya Dam:
This dam has been constructed on Barakar river. The construction on this dam was
started in 1950 and completed in 1953. Its length is 366 metres and the maximum
height above the river bed is 30 metres.
Its gross storage capacity is 395 million cubic metres and its live storage capacity is 321
million cubic metres. It is the only concrete dam in the area. Two power stations of
Page 160
CrackJPSC Mains Paper III Module B (Geography)
2000 K.W. each have been set up here. The dam provides irrigation facilities to forty
thousand hectares of land.
2. Konar Dam:
Construction on this dam started in 1950 and it was completed in 1955. It has an
installed capacity of ten megawatts. Bokaro steel plant and Bokaro thermal plant receive
hydroelectric power and clean water, respectively from this dam. It provides irrigation
to 45,000 hectares of agricultural land.
3. Maithon Dam:
It has been constructed on Barakar River, a little upstream from the confluence of river
Damodar and Barakar. It is 994 metres long and its maximum height above the river
bed is 49 metres. Its gross storage capacity is 1,357 million cubic metre. Construction on
this dam was started in 1951 and completed in 1958. It has an installed capacity of 60
megawatts.
This is also an earthern dam with a concrete spill-way which has been constructed on
the river Damodar. Construction started on this dam in 1952 and was compeleted in
1959. This dam is 2,545 metres long and its maximum height above the river bed is 49
metres. Its gross storage capacity is 1,497 million cubic metres while its live storage
capacity is 1,307 million cubic metres. It has an installed capacity of 40 megawatts and it
irrigates about 28 lakh hectares of agricultural land.
Durgapur Barrage:
The Durgapur barrage located at about 23 km from Raniganj has been created for the
storage of irrigation water. It is 831 metres long and about 12 metres high. It stores the
waters released from Konar, Tilaiya, Maithon and Panchet Hill dams. The bulk of the
water for storage is provided by Maithon and Panchet Hill dams.
Page 161
CrackJPSC Mains Paper III Module B (Geography)
This irrigation water is regulated through a network of canals extending over an area of
about 5,000 sq km in Bankura, Bardhman, Hugli and Haora districts in West Bengal.
The barrage was completed in 1955. About 4 lakh hectares are irrigated mainly along the
left bank of the river in Bardhman and Hugli districts. The hilly nature of the terrain in
Jharkhand has restricted the irrigated area.
Damodar valley project is a big landmark in the economic development of this region.
Following are the main benefits drawn from the project:
1. Flood control in the flood prone areas of Jharkhand and West Bengal.
2. Irrigation facilities to about 5.15 lakh hectares of land.
3. Installed capacity of 2, 60,000 KW of hydroelectricity at various dam sites.
4. Check on soil erosion through regulated flow of water.
5. Additional land reclamation for agriculture.
6. Navigation in Damodar River, its tributaries and channels.
7. Promotion of public health through control on malaria and other diseases as a
result of proper drainage of water.
8. Encouragement to fishing in the reservoirs and other water bodies.
9. Promotion of tourism.
10. The project has provided a broad industrial base to the area.
The Problems:
The Damodar valley project was primarily conceived for flood control and this target has
not been achieved fully. Heavy floods did occur in 1959, 1970-71 and 1978, though their
ferocity has been much reduced. Only four dams have been constructed in place of the
original suggestion of seven dams.
The over-utilisation of forests and lack of afforestation have aggravated the problem of
siltation in the reservoirs. Thus, the first line of defence in the form of forests and the
second line of defence in the form of dams have failed to eliminate the problem of floods
altogether.
Page 162
CrackJPSC Mains Paper III Module B (Geography)
Jharkhand is one of the leading mineral producing States. It is one of the leading
producers of coal, kyanite, gold, silver, bauxite and felspar. Uranium ore is mined and
processed by Uranium Corporation of India Ltd (UCIL) for use as fuel in the country's
nuclear power reactors through four underground mines, one opencast mine, two
processing plants and a by-product recovery plant, all in East Singhbhum district of the
State. Jharkhand accounts for about 36% rock phosphate, 28% coal, 26% iron ore
(hematite), 30% apatite, 22% andalusite, 18% copper ore and 5% silver ore resources of
the country. Important minerals that occur in the State are bauxite in Dumka, Gumla,
Latehar, Lohardaga and Palamau districts; china clay in Dumka, Hazaribagh,
Lohardaga, East & West Singhbhum, Sahebganj and Ranchi districts; coal in Bokaro,
Deoghar, Dhanbad, Giridih, Godda, Hazaribagh, Palamau, Pakur and Ranchi districts;
copper in Hazaribagh and East Singhbhum districts; dolomite in Garhwa and Palamau
districts; felspar in Deoghar, Dhanbad, Dumka, Giridih, Hazaribagh, Jamtara, Koderma,
Latehar, Palamau and Ranchi districts; fireclay in Dhanbad, Dumka, Giridih, Godda,
Hazaribagh, Latehar, Palamau, Ranchi and West Singhbhum districts; gold in East
Singhbhum district; graphite in Palamau district; iron ore (hematite) in West
Singhbhum district; iron ore (magnetite) in Gumla, Hazaribagh, Latehar, Palamau and
East Singhbhum districts; kyanite in Saraikala-Kharsawan and West Singhbhum
districts; limestone in Bokaro, Dhanbad, Garhwa, Giridih, Hazaribagh, Palamau,
Ranchi, East & West Singhbhum districts; manganese ore in East & West Singhbhum
districts; mica in Giridih and Koderma districts; ochre in West Singhbhum district;
dunite/pyroxenite in East Singhbhum district; quartz/silica sand in Deoghar, Dhanbad,
Dumka, Giridih, Godda, Hazaribagh, Jamtara, Koderma, Latehar, Palamau, Ranchi,
Sahebganj, Saraikala-Kharsawan and West Singhbhum districts; and quartzite in East &
West Singhbhum districts.
Other minerals that occur in the State are andalusite and rock phosphate in Palamau
district; apatite, chromite, cobalt, nickel, gold and silver in East Singhbhum district;
asbestos in East & West Singhbhum districts; barytes in Palamau and East Singhbhum
districts; bentonite in Pakur and Sahebganj districts; garnet in Hazaribagh district;
granite in Deogarh, Dhanbad, Dumka, Giridih, Godda, Gumla, Hazaribagh, Koderma,
Lohardaga, Palamau, Ranchi and East Singhbhum districts; sillimanite in Hazaribagh
district; talc/steatite/ soapstone in Giridih, Kodarma, Palamau, East & West Singhbhum
districts; titanium minerals in Ranchi and East Singhbhum districts; and vermiculite in
Giridih and Hazaribagh districts.
Page 163
CrackJPSC Mains Paper III Module B (Geography)
The State can be roughly divided into 8 major zones based on raw material deposits and
industrialization.
Palamau - Garhwa Deposits of Iron Ore, Dolomite, Coal, Graphite, China Clay and
granite
Singhbhum Industrial Area (Jamshedpur & Adityapur) Iron and Steel, Auto
Component, Cement, Uranium, Copper and Gold Mining
State Govt. proposes to allot mines/captive mines on preferential basis to the investing
companies who have put up their plant in the State for value addition of the raw
material.
Grant of mining lease to potentially viable sick units which have previously generated
adequate employment and revenue resources for the State Government will be preferred
over industries situated outside the State.
Efforts being made to work out a mechanism for State ownership of 25% raw material
being dispatched to other states in the country or exported to other countries.
Page 164
CrackJPSC Mains Paper III Module B (Geography)
Efforts also being made to allot more iron ore and coal mines to Jharkhand State
Mineral Development Corporation (JSMDC) to enable the state owned company to
enter into joint venture with other companies for taking up the development of these
mines for supplying raw material to the needy industries of the state.
Comprehensive plan for development of railway network and other infrastructure for
major mines of the state are also envisaged.
The Population of Jharkhand according to the 2011 census stands at about 32 million,
making it the 13th most populated state in India. The state makes up about 3.5% of the
country's population a figure which was about 3% during the last census in 2001. The
state is spread over an area of about 79000 sq. km. one of the smaller states in the
country in terms of area. The density of population per sq. Km. is about 414, which is
above the national average by a good 30 points. The state has a growth rate of about
22% which slightly exceeds the national growth rate of about 17%. The population of the
state is rising considerably more due to the lack of education and lack of understanding
about family planning. The literacy rate in the state is about 67% a figure that needs
instant correction and steps to do so need to be put into effect immediately. The sex
ratio in Jharkhand is about 940. The statistics in the Jharkhand Census 2011 reveal facts
that can be instrumental in planning for a better development plan for the state.
As per details from Census 2011, Jharkhand has population of 3.3 Crores, an increase
from figure of 2.69 Crore in 2001 census. Total population of Jharkhand as per 2011
census is 32,988,134 of which male and female are 16,930,315 and 16,057,819
respectively. In 2001, total population was 26,945,829 in which males were 13,885,037
while females were 13,060,792.
The total population growth in this decade was 22.42 percent while in previous decade it
was 23.19 percent. The population of Jharkhand forms 2.72 percent of India in 2011. In
2001, the figure was 2.62 percent.
Page 165
CrackJPSC Mains Paper III Module B (Geography)
1. At the time of 2001 census the population was 26,945,829. During 1991-2001
population grew by 23.4 per cent. In the decade 2001-11 growth has been 22.3
2. During the decade 91-01 least growth of 12.6 per cent was in Khunti district. In
the decade 01-11 least growth of 11.9 percent is in Dhanbad district.
3. Dhanbad district with 8.9 per cent population of the state held first rank by
population size at 2001 census. With 8.1 per cent of state population it now holds
second rank after Ranchi in 2011
4. Chatra with about 30 per cent growth during 91-01 was at highest. This position
during 01-11 has been taken by Kodarma with 32.6 per cent growth rate.
5. Population wise smallest district in the state at both the censuses has been
Lohardaga with 1.3% at 2001 and 1.4% in 2011.
6. The density of population in Jharkhand was 338 at 2001 census as against 274 in
1991 census. In 2011 census it is now 414. Dhanbad with a density of 1284 is the
outstanding district as the second densest district of Sahibganj in the state is
having a density of 719 in 2011.
7. In 2011 out of 24 districts in the state 12 returned a higher population density
than the State average of 414.
8. The 0-6 age-group population in 2011 has S/R of 943 which is below to 947
obtained for total population suggestive of male bias in Jharkhand.
9. Dhanbad district with S/R of 874 in 2001 and 908 in 2011 has though an
improved S/R but it was having lowest S/R in the state at the both censuses. In
matter of worst S/R Dhanbad is preceded by Bokaro with 916 in 2011.Though
Bokaro has also an improved S/R in 2011 over 894 in 2001.
10. Kodarma with S/R of 1006 was best placed at 2001 census followed by 1001 in
Simdega and 992 in Paschimi Singhbhum. In 2011 the best ratio is now of
Paschimi Singhbhum with 1004 followed by Simdega with 1000, Khunti with 994
and Gumla with 993.
11. In 2011 the literacy improved from about 54% at 2001 to about 68% now. The
male literacy has increased from about 67% in 2001 to about 78% in 2011. The
female literacy has jumped up to about 56% from about 40% in 2001.
12. The literacy rates also vary across districts-with a low— of 50% in Pakur district
to a high of 77% in Ranchi. In 2001 also Pakur district with about 31% literacy
occupied bottom slot. However, in 2001 Purbi Singhbhum was at the top with
about 69% literacy rate. This district now takes second place with about 76%
followed by Dhanbad with almost same rate.
13. The female literacy is highest in Ranchi with about 68% followed by Purbi
Singhbhum with about 67% and Dhanbad with about 65%.It is lowest in Pakur
with about 41% preceded by Sahibganj with about 44% and Godda with about
45%.
Page 166
CrackJPSC Mains Paper III Module B (Geography)
There are 32 tribes (2011) in Jharkhand of which Santhals are most numerous
accounting for one third of the total tribal population followed by Oraon, Munda and Ho
contributing more than 10% to the total tribal population. Other tribes such as Kharwar,
Lohra, Bhumij and Kharia have a share of less than 3% each while Mahli, Mal pahariya,
Bedia and Chero have share of 1-2% each. The tribes with less than 1% contribution to
the state’s tribal population include Karmali, Gond, Chick Baraik, Generic tribes, Kisan,
Sauria Paharia, Korwa, Kora, Paharia, Binjhia, Asur and Birhor. The most marginalized
tribes with less than 0.01% are Savar, Birjia, Gorait, Baiga, Bathudi, Banjara and Khond.
Among the districts Gumla, Lohardaga and West Singhbhum account for more than
50% tribal population. Certain tribes have been under special scrutiny on the basis of
their levels of primitiveness, backwardness and extincting status like the Asur, Paharia,
Sabar, Birhor, Birjia, Korwa, Mal Pahariya and Sauriya Paharia. Eight out of the thirty
odd tribes of Jharkhand fall under Primitive Tribal Group (PTG). They are Asur, Birhor,
Birajia, Korwa, Savar, Pahariya (Baiga), Mal Pahariya and Souriya Pahariya. Together
they constitute 2.73 lakhs (2001) which is a very nominal part of the total tribal
population. According to the reports by the health department Birhor, Birajia, Baiga and
Souriya Pahariya are declining. Though the population size is statistically not significant
for the analysis of individual tribe especially the communities with very small size of
population, it is inevitable to examine their level of development for proper intervention
and development action plan in terms of human development indicators. The sex ratio
of the STs in the state is 987 and Binjhia, Kharia and Karmali have sex ratio more than
1000. Most of the other mentioned tribes have very poor sex ratio especially the Khonds
and the Banjaras. However this is not a good measure for any estimation due to very
small population of some tribes and also the high degree of male migration amongst
certain tribes.
Here are the biggest issues of the tribal state that remain unaddressed even after 14
years of creation of the state.
Domicile policy
None of the governments dared to bring a clear policy on domicile fearing loss of votes.
When Jharkhand was carved out of Bihar 14 years ago, the tribal locals had a dream to
regain their dignity. They had a dream that their aspirations would come to fruition and
Page 167
CrackJPSC Mains Paper III Module B (Geography)
struggle for self-rule will yield results. The manipulation by Jharkhand's political class
on the domicile policy has led to distrust between the tribal and non-tribal communities.
Tribal-centric development
This state was formed for the welfare of the indigenous tribals. Tribals have their own
way of self-rule what one can call rural governance. Panchayats play an important role
in such communities so development has to be tribal-centric.
Mineral mining
There is loot of natural resources in Jharkhand. It's the repository of 40 per cent of
nation's minerals but has no clear policies that are acceptable to indigenous tribals as
well. From ArcelorMittal, Tata Steel to the Jindal Steel & Power, all have faced massive
protests by the locals.
It's considered that the mineral policy has more to do with profiting large firms. The
royalty fixed by the central government for mineral mines is very low, thus benefiting
private mining firms than the state.
In the last 14 years, there has been no effort to set up a language academy or an institute
for cultural management. Cultural discrimination of tribals by the outsiders, called
'dikus', has been one of the major issues among these communities. The indigenous
tribes demanded separate statehood to do away with years of injustice.
Land rights
Political analysts say loss of land would naturally lead to loss of tribal identity. If
government bulldozes farms with standing crops to make way for industrialists, it will
not solve the purpose of a separate state.
Tribals can't be called anti-industry or anti-development. They also want development
but not at the cost of their rights over natural resources. To avoid unrest, the new
government should make a clear stand on displacement and land acquisition
Page 168
CrackJPSC Mains Paper III Module B (Geography)
Problems of trible
This Scheme has been started by Jharkhand Government to encourage girl students
belonging to SC, ST, Minorities, and BPL families to go to schools and continue their
studies. This plan was started by the state government for the following two reasons: -
The distance between the school & their houses being too much, the family
members have difficulties in sending their girls to school.
After passing the middle level school many girl students of the villages
discontinue their studies due to lack of transportation facilities. Purpose: The
purpose of this plan is to stop the girl students belonging to the SC, ST,
Minorities and BPL families from discontinuing their studies in high school stage
due to distances between their villages & the high school. Structure: Initially the
plan of providing bicycles free of cost to the girl students belonging to SC, ST,
Minorities and BPL studying in class VIIIth, IXth, and Xth was started in the year
2002-2003. Later girl students of only class VIII of the target group are being
benefited. Process: In order to get the benefit of this plan the application is to be
sent through the concerned principal to the District Welfare Officer from where
the bicycles are distributed.
The Tribals communities form a hefty chunk of the total population of the Jharkhand
state. Out of these some tribal communities have been categorized as primitive tribal
groups on the basis of their more backward socioeconomic status and other sociological
traits. The Primitive Tribes Group includes 1-Asur 2. Birhor Birajia 4. Korba 5. Hill
Kharia 6 Mal Pahariya 7. Sauriya Paharia 8. Parahriya and 9. Sabar. These Primitive
Tribe Groups are found in all the 22 districts of the state and their total number, as per
the last survey is 193,827. Their concentration is highest in the districts of Sahebjanj
(35129) and Dumka (31550) and it is the lowest in the districts of Dhanbad (137) and
Gridih (258). Some of the Primitive Tribes Group like Asur, Birhor and Birajia lead a
nomadic life. Keeping in view the extremely low life standards of these communities the
Page 169
CrackJPSC Mains Paper III Module B (Geography)
state of Jharkhand has started Birsa Munda Awas Yojna to provide homes to the
families of Primitive Tribes.
Depending upon the availability of fund beneficiaries are selected by MESO Project
Officer/District Welfare Officer of the District. All families of Primitive Tribe Group are
to be given houses phase wise under this scheme.
The Unit Cost of a Birsa Munda Awas is Rs 70,500/-. House is constructed by the
beneficiaries himself under the supervision of Officers of Welfare Department. The
Estimate of Unit Cost is being revised to Rs 1, 34,000.
Pilot training is an ambitious plan of the State Govt. after a study conducted by the state
government, it has been seen that the benefits of the reservation policy of the Indian
Govt. for the tribal class people are not available is the work areas like pilot. As per
reservation a number of posts of pilots in the govt. sectors for the tribal class are lying
vacant. That is why the department has decided to start this plan in a successful
manner.
The purpose of this plan is to provide free professional pilot training to the girls & boys
belonging to Scheduled Tribe.
The welfare department has started giving free professional pilot training to 25 students
belonging to the Scheduled Tribe. There is a condition attached for the beneficiaries of
this plan, under which, after attaining the training and getting a job he will have to bear
the cost of education up to Graduation level from class-V of two Tribal Students from
their village or locality as selected by the Welfare Department.
According to this plan students are selected on the basis of written / physical test
conducted after they apply for the same on the basis of the advertisement published in
various newspapers. There after they are sent for training to two flying training
institutes at Kanpur & Pondichery.
The Rajiv Gandhi National Fellowship (RGNF) Scheme for Scheduled Caste and
Scheduled Tribes is formulated and funded by Ministry of Social Justice &
Page 170
CrackJPSC Mains Paper III Module B (Geography)
Empowerment and Ministry of Tribal Affairs. The scheme is open to candidates who
belong to Scheduled Caste & Scheduled Tribe and wish to pursue higher studies such as
regular and full time M.Phil. and Ph.D degrees in Sciences, Humanities, Social Sciences
and Engineering & Technology. There are 2000 slots for Scheduled Caste and 667 slots
for Scheduled Tribe candidates every year for all the subjects.
One Hundred awards, subject to availability of funds, per year are available under the
Scheme.
Sarva Siksha Abhiyan provides for free distribution of text books to the girls belonging
to all categories and boys belonging to SC/ST categories of class I-VIII. The purpose of
this scheme is to provide free text books to those categories who are not covered under
SSA belonging to the General and O.B.C. categories. During 2015-16 nearly 12.50 lakh
children will get benefit of this scheme. The funds will be reimbursed to Jharkhand
Education Project Council as a Grants- in- Aid.
The objective of the scheme is to establish an enabling environment to reduce the drop
outs and to promote the enrolment of girl child belonging to SC/ST communities in
Page 171
CrackJPSC Mains Paper III Module B (Geography)
middle schools and ensure their retention up to the 14 years of age. This scheme will
help in reducing dropout rate and encourage participation of girl child at upper primary
level. The scheme will cover all SC/ST girls who pass class V from the State Government
and Government-aided schools in the academic year 2015-16 onwards. Married girls
and girl child studying in private schools will not be covered under this scheme. A sum
of Rs. 2000 will be deposited under term deposit/fixed deposit in public sector bank or
in a post office in the name of every eligible girl child. The term/period of the deposit
will be counted from the date of deposit to the date on which the girl child enrolls herself
in class IX in Government/ Government-aided/recognized high school.
The state of Jharkhand, widely acclaimed as the region of future, has enormous
potentialities for industrialization. With its large deposits of minerals, it provides a solid
launching pad for all kinds of industries.
Born out of partition from old Bihar state in 2000, Jharkhand produces about 70% of
the output of the old Bihar state. It is known for its rich store of minerals: therefore,
mining in Jharkhand forms an integral part of the economy of Jharkhand. Since it is
rich in minerals, the state per capita income is likely to increase in the coming years.
Jharkhand has a concentration of some of the country’s highly industrialised cities such
as Jamshedpur, Ranchi, Bokaro Steel City and Dhanbad. It also has several firsts in
India, including:
Largest fertiliser factory of its time in India (since shut down) at Sindri, Dhanbad
Page 172
CrackJPSC Mains Paper III Module B (Geography)
TELCON, Jamshedpur.
Praxair, Jamshedpur.
Tinplate, Jamshedpur.
JP Cement, Bokaro
Page 173
CrackJPSC Mains Paper III Module B (Geography)
Talking about the business and economy of Jharkhand, it can be said that Jharkhand
houses two major steel plants in India. The steel plants at Bokaro and the Tata Iron and
Steel Company are the two major plants housed within the territory of Jharkhand. These
steel plants largely contribute towards the economy of not only Jharkhand, but India.
Among the other important steel plants that form an integral part of the business and
economy at Jharkhand are:
Sriram Bearing
Page 174
CrackJPSC Mains Paper III Module B (Geography)
It is noteworthy that these minerals form the foundation of all the major industries in
Jharkhand, one of the biggest industrial belts in India.
Large deposits of coal and iron ore support concentration of industry in centers like
Jamshedpur, Bokaro and Ranchi.
Tata Steel, an S&P CNX 500 conglomerate has its corporate office in Jharkhand. It
reported a gross income of Rs.204, 910 million for 2005. NTPC will start coal
production from its captive mine in state in 2011-12, for which the company will be
investing about Rs 1,800 crore.
Jharkhand is a state of Mines, Minerals and Industries. Mines are located in almost all
parts of state. Dhanbad District are known as coal capital of India, Koderma District is
known as Mica capital of India, Singbhum District (Jamshedpur and Chaibasa) is the
home of Tata industries and rich in iron and ore as well as Bokaro District has Asia’s
largest steel production centre setup by government of India.
Iron Ore - The total reserve of Hematite in Jharkhand region is over 3000 million
tones. Out of this total reserves 2000 million tones occur in Chiria, near Monoharpur in
the Singbhum district is one of the largest single deposits of the world. The average
quality of Chiria deposits 62-63% Fe content which should be judiciously exploited in,
phased manner to suit the long term need of our country.
Coal - Almost 100% of prime coking coal, 93% of medium coking coal and about 30% of
the semi coking coal or bendable coal reserves are available in Jharkhand. The total
reserves of the coal in Jharkhand is of the order 69128 million tones which spread over
Jharia, Bokaro, Rajmahal, Hazaribagh and Chatra area.
Page 175
CrackJPSC Mains Paper III Module B (Geography)
Sindri: The famous fertiliser complex, 30 kms away from Dhanbad, is located on the
bank of Damodar River.
Uranium - Jaduguda: Located in East Singhbhum district, it is the first place where
exploration followed by exploratory mining was undertaken. Soon after, exploitation
was undertaken by UCIL in 1967. Mining is still in progress and mineralisation has been
found to continue beyond 900 meters vertical depth. Here the mineralisation is
associated with conglomerate and chlorite schist of Singhbhum group of Proterozoic
age.
Bhatin: It lies 2 km west of Jaduguda along the Singhbhum shear zone. Mineralisation
is associated with brecciated quartzite and biotite chlorite schist, which are highly
sheared. Mining is in progress.
Narwapahar: It lies 10 km west of Jaduguda along the Singhbhum shear zone. The host
rock for uranium mineralisation is chlorite-quartz schist and the mineralisation is
spread over 2000 meters strike length. Currently this deposit is under exploitation by
UCIL.
Other smaller uranium occurrences along this shear zone, in a similar geological set up
are (i) Kanyaluka (ii) Garadih (ii) Nimdih (iv) Rajgaon and (v) Nandup.
Page 176
CrackJPSC Mains Paper III Module B (Geography)
Lime Stone - There are 22 mines of limestone in Jharkhand having a total reserve of 563
million tones in Palamu, Hazaribag, Singbhum and Ranchi districts. All grades of lime
stone (BF, SMS and Cement grade) are available in these mines.
Graphite - The Graphite reserve of Jharkhand is mainly located in Palamu district. The
most important deposit of Palamu district is located at Sokra, Satbarba, Barwadih area
where both flaky and amorphous graphite occur in lumpy form. A reserve of 0.6 million
tones with 50 to 60% carbon content has been estimated at Sokra. The deposits of
Palamu district are being mined mainly by State Mineral Development Corporation and
few private parties.
Granite and ornamental stones - Extensive deposits of granite and ornamental stones
such as dolomites, gabber, peridolite, banded hematite jasper and migmatites etc. are
also available in this state. Based on the IBM reports, the granite reserved are estimated
to be around 19 millions cu.mt.
Fireclay - Fireclay deposits are available in the coal bearing region of Dhanbad,
Hazaribag, Giridih, Ranchi and Palamu district. Out of the total 703 million tones
reserves in the country, Jharkhand has over 47 million tones deposits of fireclay.
Thus, it can be concluded that Jharkhand mines and minerals are an inevitable part of
the economy, not only of Jharkhand but also of India.
It is noteworthy that although being an industrial belt and mineral based manufacturing
industry is the mainstay of Jharkhand's economy, agriculture also plays an important
role in the business and economy of Jharkhand. In fact, despite being mineral-rich, 80
percent of Jharkhand's population resides in villages and they depend primarily on
agriculture and other associated activities for their livelihood. The principal food grains
of Jharkhand are wheat, paddy, maize and pulses.
Varied agricultural economy also supports a host of agro-based industries in the state
that includes food processing. Just within a period of three years, the state has
graduated from a vegetable procuring state to a 100,000 tonnes vegetable surplus state.
Page 177
CrackJPSC Mains Paper III Module B (Geography)
The soil as well as the climatic conditions of the state is favourable for the growth of
mushroom, tea, ornamental plants and spices.
Therefore, it can be concluded that the business and economy is a mixed bag:
agriculture and industries flourish side by side within the territory of Jharkhand.
Besides industries, Jharkhand is also rich in forests, woodlands, energy reserves and
fertile land. This makes Jharkhand a potentially independent state. However, though
being a potentially rich state, it is facing some teething problems towards its
development, which largely pertains to infrastructural lacunae. The state government of
Jharkhand is endeavouring to launch ambitious programmes to increase agricultural
production, through rainwater harvesting, supply of agricultural implements and better
quality of seeds.
Access of some of the basic facilities such as potable water, road, steady power supply
and educational facilities to the multitude of the state's population, are proving to be
daunting challenges. The state has a number of prosperous industrial cities like
Dhanbad, Jamsedhpur, Bokaro, etc. but the large parts of rural Jharkhand are still
reeling under poverty. However, there are many opportunities in the state in the field of
geological exploration, power generation, as well as in mining of silver, gold, other base
metals and many of the precious stones, which need to be properly harnessed to make
the business and economy of Jharkhand a prosperous one.
Page 178
CrackJPSC Mains Paper III Module B (Geography)
The state government however seems to project a bit pessimistic view of the
urbanization trends and patterns of the region4 . The urbanization level in Jharkhand
has made a progress of 1.81 percentage points between 2001-11 moving from 22.24% in
2001 to 24.05% in 2011. The total number of towns in 2001 was 119 which rose to 152 in
2011 and even though the urbanization levels in the region falls short below the national
average, the state has made a significant progress by adding a net urban population of
1.9 million. The historical growth of urban areas in Jharkhand region clearly shows a
marked increase in the total number of towns after 1941. However the real jump in the
growth of urban areas was visualized since 1951. Between 1951-61, 24 new towns were
added to the list. However this number dropped down to 12 for the period 1971-81
reflected in the form of a slight hitch in the upward rising curve. Beyond 1981 there has
been continued rise in the number of new towns with each successive decade, bringing
in the total number of towns to 152. Well the regional patterns of urbanization portrays
some quite interesting picture with majority of districts with very low level of
urbanization while three districts namely Bokaro, Dhanbad and Purbi Singhbhum with
more than 40% urbanization levels in 2001.
The highest level of urbanization was in Purbi Singhbhum district i.e. 55.03% while
Godda experienced the lowest urbanization level of 3.53%. In 2011 the number of
districts with above 40% urbanization level raised to 5 including Ranchi and the newly
formed Ramgarh districts. Talking of the geographical distribution, the most urbanized
areas were the east central and south east parts of the state in both the years. Such
distribution patterns have developed owing largely to the pattern of industrial
developments in the regions. Out of the five most industrialized districts, three are the
hub of industrial activities in the state. Ranchi on the other hand accrues its urban
growth to both industrial developments as well as to fact of being the administrative
centre of the state. The districts in the north-east part of the state i.e. Godda, Pakur,
Dumka, Deoghar, Giridih and Sahibganj too depicts urbanization levels well below 12%
which is far below the state aggregate of 24.05% in 2011. The central rectangular strip
running from north to south of the state including Kodarma, Hazaribag, Sariakela, and
Paschim Singhbhum portrays urbanization levels between 12% to 40%. However the
Page 179
CrackJPSC Mains Paper III Module B (Geography)
Pollution Problems
The State of Jharkhand: Environmental Concerns
The word Jharkhand connotes an area of land covered with forests. The word
Jharkhand has been derived from the Sanskrit word, Jhari Khanda the ancient name
depicting the regions’ dense forest. Thus, naturally as well as symbolically, the states’
very existence is associated with forests. Another remarkable aspect is the presence of
various ethnic groups in the region such as Munda, Ho, Oraon, Santhal, Paharia, Chero,
Birjea, Asura, Kharia and many others. These indigenous tribes have lived in
harmonious relationship with their environment and have developed a culture, which is
completely nature centric. The tribals have a symbiotic relationship with nature as is
reflected from the festivals like Karma and Sarhul, wherein trees are worshiped. Since
these aboriginal races are closely connected with nature, the large scale exploitation of
natural resources has not only had an adverse impact on the environment, but has also
drastically affected their lives.
Boon: The State of Jharkhand has immensely rich mineral resources amounting to
approximately 50% of the countries’ resources. Minerals like iron ore, coal, copper,
mica, bauxite, manganese, lime stone, uranium and many more are found in abundance
in the State. Several Steel giants, Thermal Power Generation Units and aluminum plants
are dependent on supply of iron, coal and bauxite available in the State. Massive
Page 180
CrackJPSC Mains Paper III Module B (Geography)
Bane: Unfortunately, being rich in mineral resources did not aid to its growth rather, it
destroyed the basic essence of the State, i.e. its rich greenery, flowing streams, virgin
waterfalls and rare wild animals. Uncontrolled mining and the greed to extract more
and more from the Earth has not only destroyed the forest area, but also the wild life
and the livelihood of the tribal communities, who are fully dependent on the forests. The
density of Saranda Forest once popularly known as a forest where the sun rays had
difficulty in penetrating and where the elephants had a cozy habitat is decreasing day by
day. Mining can never be a innocuous activity. Unless the mining activities are checked,
carefully planned and executed they are bound to ruin the land, water, forest and air.
Due to haphazard mining, rich forests and agricultural lands of the indigenous tribals is
lying waste. Due to open cast mining operations, there has been and alteration of soil
profile and degradation of the productive capacity of the lands. During production, coal
carries methane gas which can ignite spontaneously. Since, the last 70 years, an
underground fire has raged in the Jharia Coalfields, burning millions of tones of coal.
Due to unsustainable mining of natural resources, the Bio-diversity in the State has been
badly affected. Due to decreasing forest area, the number of elephants, tiger, leopard,
sloth bear and other such animals is decreasing day by day. Large scale mining
operations have adversely affected ground water table. Damodar, once consider a sacred
river by the tribals is a black shrunken sewage cannel filled with filth and contaminated
with toxic materials like arsenic, mercury, fluoride and lead. The water of Damodar was
once the support system of the local inhabitants, but now it can neither be used for
drinking nor for bathing. Similarly, Subarnrekha which means streak of gold was the
lifeline of tribal communities, but is now a recipient of domestic, industrial and
radioactive pollution. Once home of rich aquatic life and fishery, today has very little to
offer to those who live around her. Due to the uranium mining in Jadugora, the people
in the area are affected by the radiation and are falling prey to innumerable diseases like
fatigue, lack of appetite, thalassemia, downs’ syndrome, skeletal deformities and many
more. Unfortunately, much has not been done on behalf of the State to combat the
pollution or to protect and preserve the rich natural heritage, which is the symbolism of
the State. Till the recent past we have seen that the Pollution Control Board, which is the
major stake holder in matters concerning environment was defunct in the State and was
an office probably only to fill-up political vacancies. The lethargic attitude of the
Pollution Control Board is apparent from the Saga of pollution related activities spread
across the State. It is high time that the watch dog of the environment wakes-up to the
call of nature and realizes that they are accountable and answerable, if pollution is not
being checked and the environment at large is suffering. As per the report of the Centre
for Science and Environment (CSE), a horrific picture of devastation has been wrought
by mining in the country. The statistics of the report reveal a shocking and alarming
situation:
Page 181
CrackJPSC Mains Paper III Module B (Geography)
Between 1950 and 1991, mining displaced about 2.6 million people – not even 25
percent of these displaced have been rehabilitated. About 52 percent of these
displaced were tribals.
For every 1 percent that mining contributes to India’s GDP, it displaces 3-4 times
more people than all the development projects put together.
Forest land diversion for mining has been going up. So has water use and air
pollution in the mining hotspots. An estimated 1.64 lakh hectare of forest land
has already been diverted for mining in the country. Iron ore mining in India
used up 77 million tone of water in 2005-06, enough to meet the daily water
needs of more than 3 million people.
Mining of major minerals generated about 1.84 billion tone of waste in 2006
most of which has not been disposed of properly. Coal mining has been the chief
culprit: every tone of coal extracted generates 3-4 tone of wastes.
In Jharkhand, rampant mining has turned large tracts of forests into wasteland.
According to the Union Ministry of Environment and Forests, between 1985-2004,
more than 9,000 hectare of forest land had been diverted for mining in the state. This
was approximately 10 percent of the total forest and diverted for mining in India- and
this did not include the thousands of hectares diverted by the coal mining sector.
Naturally, Jharkhand’s people, who include, the fifth highest concentration of forest
dwellers and tribals in the country, have been badly hit. It is estimated that 55 percent of
the people displaced due to mining in the state are tribals. Says the CSE report: “The
very people for whom Jharkhand was ostensibly created are now being sacrificed in the
name of their own state’s development”. The Jharkhand High Court being the highest
court of the land could not have sat with closed eyes over the massive environmental
destruction and in a series of public interest litigation, at times suo-moto and at times
on the call of public spirited citizens has taken cognizance of environmental issues and
has directed the State Government to perform its statutory duties.
Page 182